| |
|
2" to 4-1/4" Oil Filter Wrench These Oil Filter Pliers have
... Read more
2" to 4-1/4" Oil Filter Wrench These Oil Filter Pliers have slip joint handles. Jaw teeth hold 2-1/2-inch to 4-1/4-inch for sure grip. The 20 degree jaw bend means these pliers can be used for more applications. Cushioned handles offer safety and comfort 12-1/4'' handle gives you torque Capacity: 2'...
Minimize
|
|
|
| |
|
|
starting from $300
(3 stores)
|
|
| |
|
Brake bleeder vacuum pump Brake bleeder and vacuum pump kit
... Read more
Brake bleeder vacuum pump Brake bleeder and vacuum pump kit includes: vacuum pump, reservoir jar w/lids, 2 24" vacuum hoses, 2 3" vacuum hoses, 2 tapered hose adapters, T hose connector, straight hose connector, brake bleeder valve adapters (3 sizes), and a universal cup adapter Can be used for many...
Minimize
|
|
|
|
| |
|
|
starting from $25
(2 stores)
|
|
| |
|
PLEASE READ DESCRIPTION CAREFULLY BEFORE BUYING YOU ARE BUY
... Read more
PLEASE READ DESCRIPTION CAREFULLY BEFORE BUYING YOU ARE BUYING A NEW 25 PC 5/16" 18 LONG PANEL NUTS U.S .A . MADE FITS MANY MAKES, MODELS AND YEARS OF CHEVY, FORD, DODGE AND CHRYSLER THESE FASTENERS ARE IDEAL FOR INTER-FENDERS FENDERS AND MUCH MORE NOTE; PLEASE CHECK YOUR SIZE BEFOR ORDERING CHECK Y...
Minimize
|
|
FREE Shipping
|
|
| |
|
Universal 3 Jaw Adjustable Oil Filter Wrench Remove all pas
... Read more
Universal 3 Jaw Adjustable Oil Filter Wrench Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 1 5/64 to 3-7/8".Use with 3/8" square drive ratchet or braker bar. Low profile design for confined areas 1-5/64" maximum filter depth x 3-7/8" inside dia...
Minimize
|
|
|
|
| |
|
Quickly and easily removes heater hose from heate
... Read more
Quickly and easily removes heater hose from heater core tube without damaging coupling retainer or hose. This set includes the heater hose disconnect tool for 5/8in. and 3/4in. heater hoses with quick connect couplings at heater core, and an extension handle for easier access. For use on 1986-current Aerostar vans and 1991-current full-size vans 1987 to current Dodge Caravan and Plymouth Voyager vans.
Minimize
|
starting from $53
(4 stores)
|
|
| |
|
|
starting from $21
(4 stores)
|
|
| |
|
Also known as: OTC-7157, OTC7157; Features and Benefits:
... Read more |
|
|
|
| |
|
Please note that we are unable to ship to a PO Box, APO/FPO
... Read more
Please note that we are unable to ship to a PO Box, APO/FPO, AK, HI, PR or to any address outside of the 48-state US via eBay. Please see table below for exact item specifications. Performance Tool W1269 Socket, Spindle Nut, Chromemoly, Black Oxide, 1/2 in. Drive, Ford/Chevy/Dodge/GMC, Each Product ...
Minimize
|
|
|
|
| |
|
PLEASE READ DESCRIPTION CAREFULLY BEFORE BUYING YOU ARE BUY
... Read more
PLEASE READ DESCRIPTION CAREFULLY BEFORE BUYING YOU ARE BUYING A NEW 25 PC 1/4" 20 SHORT PANEL NUTS U.S .A . MADE FITS MANY MAKES, MODELS AND YEARS OF CHEVY, FORD, DODGE AND CHRYSLER THESE FASTENERS ARE IDEAL FOR INTER-FENDERS FENDERS AND MUCH MORE NOTE; PLEASE CHECK YOUR SIZE BEFOR ORDERING CHECK Y...
Minimize
|
|
FREE Shipping
|
|
| |
|
This reamer was made by Keystone Reamer and Tool Co. and ar
... Read more
This reamer was made by Keystone Reamer and Tool Co. and are High Quality Tools,and were made here in Millersburg PA.USA Brand New! Made in the USA! New-Old Stock. King Pin Reamer, 13/16" (.812) 16" long. No 1102s Straight Flute. Used for Reaming King Pins Bushings in Alignment for years a makes bel...
Minimize
|
|
FREE Shipping
|
|
| |
|
By-DeltaConsolidated Full Size Single Lid Crossov
... Read more
By-DeltaConsolidated Full Size Single Lid Crossover Truck Box RSL Rigid Structural Lid strong and insulated with 3-layer lamination outer shell insulation lid liner and reverse beveled edge design for greater security strength and weather resistance Push button latch release High-strength body design resists cargo damage and protects lock system Welded divider creates end storage bin Rugged 4-compartment injection-molded sliding tray for convenient access and storage for hand tools or parts Dual Posi-Lift gas springs make lid self-rising Live Cell wide soft foam weather stripping 70-1/8 inW x 14-1/4 inH x 20-7/8 inD///-Tools/Automotive/Truck Boxes
Minimize
|
starting from $331
(6 stores)
|
|
| |
|
274004-WD Wheel Bearing Lock-Nut Tools Combinatio
... Read more
274004-WD Wheel Bearing Lock-Nut Tools Combination tool for both 4-slot and 6-slot applications. 1/2” drive. Not for use with impact wrench. Clam shell packageShipping weight 1 lb, 9 oz.Works with all 27250 applications PLUSChevy 6 lug with 10/50 dia., ring gear 80-91 GMC 6 lug with 10.5 dia., ring gear 80-91, LIS27400, , LIS-27400
Minimize
|
starting from $22
(5 stores)
|
|
| |
|
25080Rear Disc Brake Caliper Tool AdapterAdapters
... Read more
25080Rear Disc Brake Caliper Tool AdapterAdapters are individually skin-packed for do-it-yourselfers. Use with a ratchet and 3/8" drive extension. Press downward and turn to compress piston. 1-1/2" adapter (narrow pins) for most Hondas, Mazdas, Dodge Conquests, Mitsubishi Starions and 1 1/2" GMs (wide pins) for most Fords, Toyotas and Fieros., LIS25080, ,
Minimize
|
starting from $8.00
(4 stores)
|
|
| |
|
|
starting from $49
(2 stores)
|
|
| |
|
|
starting from $251
(5 stores)
|
|
| |
|
Includes plate, 3/8" extension, forcing screw and
... Read more
Includes plate, 3/8" extension, forcing screw and adapters Usable two ways: one side fits GM, Honda, Mitsubishi, Mazda, Dodge, Conquest and Subaru; other side fits Ford, Pontiac, Fiero, Subaru and Toyota
Minimize
|
starting from $60
(4 stores)
|
|
| |
|
For removal of the front hub assembly, necessar
... Read more
For removal of the front hub assembly, necessary for wheel bearing or brake rotor service. Provides the mechanical advantage and straight pull not possible with a slide hammer. Services: 1988-2000 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon 1994-2000 Dodge 1/2-ton, 3/4-ton, and 1-tonRam trucks 1997-2000 Ford 1/2-ton trucks, and Expeditions; 1998-2000, Ford 3/4-ton and 1-ton trucks, and Excursions 1985-2001 Jeep Cherokee.
Minimize
|
starting from $89
(4 stores)
|
|
| |
|
Wheel-bearing locknut kit for use with late-model
... Read more
Wheel-bearing locknut kit for use with late-model Ford, Dodge, Toyota trucks Includes 7 most-used wheel-bearing locknut sockets Versatile kit built for long-lasting wear Packaged in durable, blow-molded case with easy-to-use instructions Lifetime warranty, Manufacturer: KD Tools
Minimize
|
starting from $57
(4 stores)
|
|
| |
|
272504-WD Wheel Bearing Lock-Nut Tools For 4-slot
... Read more
272504-WD Wheel Bearing Lock-Nut Tools For 4-slot applications. 1/2" drive. Not for use with impact wrench. Clam shell package. Shipping wt. 1 lb. 4 oz. 27250 (4-Slot Applications) Make Model & Body Style Year Chevy 1/2, 3/4
Minimize
|
starting from $22
(4 stores)
|
|
| |
|
Spindle-nut service kit for use with SUV, light t
... Read more
Spindle-nut service kit for use with SUV, light truck axle locknuts Features 1/2-inch drive sockets for multiple applications Chrome vanadium steel construction Packaged in durable, blow-molded case with easy-to-use instructions Lifetime warranty, Manufacturer: KD Tools
Minimize
|
starting from $56
(3 stores)
|
|
| |
|
|
starting from $13
(3 stores)
|
|
| |
|
Includes one each of OTC locknut sockets:- No.
... Read more
Includes one each of OTC locknut sockets:- No. 6612 - 55mm for Toyota- No. 6902 - 2-3/8" for Ford- No. 6921 - 2-1/2" for Ford- No. 6795 - 2-1/2" 'rounded' for Ford- No. 6796 - 2-3/4" 'rounded' for Ford- No. 6928 - 2-9/16" 'rounded' for Dodge- No. 6936 - 2-3/8" 'rounded' for Ford All sockets are 1/2" sq. drive.
Minimize
|
starting from $85
(1 store)
|
|
| |
|
Four-lug wrench removes spindle nuts on 1/2 and 3
... Read more
Four-lug wrench removes spindle nuts on 1/2 and 3/4 ton 4-Wheel drive vehicles. It features uniquely designed lugs for maximum strength. Use with 1/2" square drive tool. Will work on Ford Vehicles with ratcheting type lock nuts on front axle.Applications: 1959-1980 Ford 1/2 and 3/4 Ton, Bronco 1984-Newer Ford Ranger and Bronco II with manual hubs. 1993-Newer Ford Ranger, Bronco II and Explorer with manual hubs. 1980-1996 Ford F150, Bronco, F250 and 350 with Dana 44 Axle or ratcheting lock nut. 1960-1990 GM 1/2 Ton, Full size Blazer/Jimmy 1969-1989 Dodge 1/2 ton with manual hubs 1990-93 Dodge with Dana 44 Axle with automatic lock hubs*Caution: Do Not Use With Power Tools
Minimize
|
starting from $19
(1 store)
|
|
| |
|
|
starting from $53
(1 store)
|
|
| |
|
Wrench features uniquely designed lugs for maximu
... Read more
Wrench features uniquely designed lugs for maximum strength Use with 1/2" square drive Outer diameter: 2.60"; Inner diameter: 2.23" Length: 2.94" Inside depth: 2.375", Manufacturer: KD Tools
Minimize
|
starting from $20
(5 stores)
|
|
| |
|
|
starting from $42
(6 stores)
|
|
| |
|
Three sockets in one convenient case Fits many po
... Read more
Three sockets in one convenient case Fits many popular applications Sockets are low profile for hard to reach areas One socket fits both 35 and 36 mm applications Use with 3/8" drive, Manufacturer: Lisle
Minimize
|
starting from $19
(6 stores)
|
|
| |
|
The heavy duty tool set is excellent for removal
... Read more
The heavy duty tool set is excellent for removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins It will remove even rusted and corroded parts Set contains C-frame press, 3 receiver tubes sizes: 2-3/4ÃÂx3", 2-1/4ÃÂx 2-1/2ÃÂ & 1-3/4ÃÂx2ÃÂ, installation and removing adapters Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles) Blow molded case for easy storage and transport
Minimize
|
starting from $65
(4 stores)
|
