Security Systems and Surveillance > Housing and Mounting Accessories

The AXIS 206/207 Vandal-Resistant Housing provide ... Read more

The AXIS 206/207 Vandal-Resistant Housing provides a tamper-resistant solution for indoor security applications using AXIS 206 and AXIS 207 Network Cameras. Minimize

Mount camera to any length of 0.5-inch standard c ... Read more

Mount camera to any length of 0.5-inch standard conduit Camera mounts via standard screw-mount Designed to hold cameras up to 5 pounds Durable all-metal construction Unit measures 1 x 5 x 9.5 inches (W x D x H) Minimize

2 adjusting points for maximum positioning power, ... Read more

2 adjusting points for maximum positioning power, 210-degree tilt, 360 turn and 360 rotation, Set-screw adjustment, 2 1/2" x 2 1/2" base with four 6.7mm holes Minimize

Mobile Video Accessories9" Deluxe CCTV Mounts2 ad ... Read more

Mobile Video Accessories9" Deluxe CCTV Mounts2 adjusting points for maximum positioning power210-degree tilt, 360° turn and 360° rotationSet-screw adjustment2 1/2" x 2 1/2" base with four 6.7mm holesNote:Mobile Video AccessoriesUPC Code: 729000000000Length: 2 Width: 3 Height: 9.75827-09W Minimize

SAMSUNG SADT-110CM WALL MOUNT ADAPTORSAMSUNG SADT ... Read more

SAMSUNG SADT-110CM WALL MOUNT ADAPTORSAMSUNG SADT-110CM CORNER MOUNT ADAPTER FOR PROFESSIONAL DOME CAMERASEspecially designed for the Samsung IC (intelligent camera) series such as the SSC-641 and the SSC-643, can be used with other cameras as wellFEATURES:-Indoor or Outdoor Applications- Supports up to 97 Pounds (44Kg)- Rugged Construction- It requires an SADT-100WM or one SADT-101WM mount- Steel body (see chart)| MANUAL | SPEC SHEET Minimize

The Altronix ALTV1224DC DC CCTV Power Supply is d ... Read more

The Altronix ALTV1224DC DC CCTV Power Supply is designed with eight (8) individually fused outputs for powering CCTV Cameras and other video accessories. It will provide 12 or 24 VDC distributed via eight (8) fuse output with a total of 4 amp continuous supply current. FEATURES: 12VDC or 24VDC output. 4 amp of total continuous supply current output. Eight (8) fuse protected outputs. Filtered and electronically regulated outputs. Output fuses are rated @ 1 amp. 115VAC 50/60Hz, 1.45 amp input. Input fuses are rated @ 3.5 amp. Surge suppression. AC/DC power LED indicator. Power ON/OFF switch. Unit maintains camera synchronization. Minimize

Phillips: 4 mm fixed lens LTC (0350/21) and 3.5 t ... Read more

Phillips: 4 mm fixed lens LTC (0350/21) and 3.5 to 8 mm varifocal lens Tamper-resistant fasteners Sanyo: day/night color CCD 4 mm fixed lens (VCC-4324) and 3.5 to 8 mm varifocal lens Fully adjustable camera bracket for top or bottom mounting NOTE: Minimize

Panasonic PRC-201C Low Profile Recessed Ceiling H ... Read more

Panasonic PRC-201C Low Profile Recessed Ceiling Housing (PRC 201C, PRC201C)Panasonic PRC-201C Low Profile Recessed Ceiling Housing, Fully adjustable for 360 degree positioning, Metal back box for plenum applications to comply with standard building codes, Designed for use in 2' x 2' suspended ceiling applications, Units are sized for use with a fixed solid state or 1/3" to 1/2" camera and lens combination, Includes 26-gauge galvanized steel metal cover.General InformationManufacturerPanasonicProduct NameHousingManufacturer Part NumberPRC-201CMarketing InformationThe PRC-201C housing is designed for use in suspended or sheet rock ceiling applications. Units are sized for use with a solid state 1/2" or 1/3" camera and lens combination. Housings are manufactured from 94HB flame Minimize

Panasonic PPRM30G Parapet Mount for POD7C inside ... Read more

Panasonic PPRM30G Parapet Mount for POD7C inside wall (PPRM-30G, PPRM 30G)Panasonic PPRM30G Parapet Mount for POD7C (inside wall), All aluminum construction, Durable powder coat finish, 1 1/2" pipe thread for quick and easy mounting, Extension piece with access plug for wire pulls, 60 lb load rating. General InformationManufacturerPanasonicProduct NameParapet MountManufacturer Part NumberPPRM30GMarketing InformationFor parapet mounting situations, the PPRM30G offers ease of installation and service. It's designed to be used on either inside or outside roof top parapets, and a 1 1/2" pipe thread alows quick and easy mounting of pendant versions such as POD7C and POD7U. An extension piece is included, which features an access plug on the end for wire pulls and allows mo Minimize

Mounts to any length 3/4" micro conduit for ultim ... Read more

Mounts to any length 3/4" micro conduit for ultimate flexibilityDesigned for cameras up to 3lbs. Perfect for warehouses and convention centers Minimize

PANAVISE 6' DELUXE CCTV MOUNT BLACK 2 adjusting ... Read more

PANAVISE 6' DELUXE CCTV MOUNT BLACK 2 adjusting points for maximum positioning power 210° tilt, 360° turn and 360° rotation Aluminum alloy shafts Tamper-resistant set screw 2 1/2' x 2 1/2' square base with 4 6.7mm holes Minimize

The BMT10C is a bullet resistant environmental ca ... Read more

The BMT10C is a bullet resistant environmental camera housing. It features a 7-gauge steel body, and is designed and constructed to meet or exceed a Level II protection per UL standard 752. The enclosure has an integrated tilt bracket that protects all wiring and allows for surface mount applications. Camera/lens combinations up to 9.5? long and 3.25? wide can be accommodated by the BMT10C, plus an innovative camera sled allows the camera to be rotated 360° within the housing to allow for any mount position. FEATURES: Off-white powder coated stainless steel Easy-to-position camera sled Cable-protective mount Options: 115 VAC heater, sunshield MCL 9.5"PDF Spec Sheet Minimize

Mount camera to any length of 0.75-inch standard ... Read more

Mount camera to any length of 0.75-inch standard conduit Camera mounts via standard screw-mount Designed to hold cameras up to 5 pounds Durable all-metal construction Unit measures 1 x 5 x 9.5 inches (W x D x H) Minimize

Housing meets international IP65 standard for dus ... Read more

Housing meets international IP65 standard for dust and moistureAluminum, steel and plastic construction with acrylic dome bubbleWall or ceiling mount options Minimize

The PMEH8A is a vandal-resistant, 8'' indoor wedg ... Read more

The PMEH8A is a vandal-resistant, 8'' indoor wedge housing for the WV-NP244, WV-CP480 and WV-CP280 series cameras. The maximum camera length is 8.5''. Minimize