|
CRL 18" Round Brushed Stainless PP45 Elegant Series Counter
... Read more
CRL 18" Round Brushed Stainless PP45 Elegant Series Counter/Partition 135 Degree Posts, PP45ABS, C.R. Laurence
Minimize
|
|
|
|
Self-Centering with Optional 5° Pivot Pin Set Available in
... Read more
Self-Centering with Optional 5° Pivot Pin Set Available in Many Beautiful Finishes 3 Year Warranty The CRL Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types,...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Factory Set for 5° Offset Closure into Shower Interior Avai
... Read more
Factory Set for 5° Offset Closure into Shower Interior Available in Several Beautiful Finishes 3 Year Warranty The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives de...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Rivet, 60-Series. 3/32" Diameter, 5/8" Length. Used to inst
... Read more
Rivet, 60-Series. 3/32" Diameter, 5/8" Length. Used to install window channel balance Top and Bottom Guides in the Channel with the Rivet Installation Tool . Minimum Order: 1 Rivet.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL Stainless Lock Washers for 1/2" Standoffs , LW10S, C.R.
... Read more
CRL Stainless Lock Washers for 1/2" Standoffs , LW10S, C.R. Laurence
Minimize
|
|
|
|
For Use with All 1-1/2" and 2" Diameter Standoff Bases Thes
... Read more
For Use with All 1-1/2" and 2" Diameter Standoff Bases These CRL Flat Washers are used with 3/8"-16 Hex Nuts when attaching our 1-1/2 and 2 inch diameter Standoff Bases to panels or substrates. Finish: Nickel Plated Minimum Order: 1 Each
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Somaca/CRL 3/8" Fixed Corner Keys With Hook - Replaced wi
... Read more
Somaca/CRL 3/8" Fixed Corner Keys With Hook - Replaced with Part Number 6267, 3455463, C.R. Laurence
Minimize
|
|
|
|
For Use with All 1/2" Standoff Bases These CRL Lock Washers
... Read more
For Use with All 1/2" Standoff Bases These CRL Lock Washers are used with applicable 10-24 Hex Nuts for mounting 1/2 Inch (12 millimeter) Standoff Base assemblies. Finish: Stainless Overall Diameter: 7/16 in (11 mm)
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Somaca/CRL 3/4" Fixed Corner Keys With Hook - Replaced wi
... Read more
Somaca/CRL 3/4" Fixed Corner Keys With Hook - Replaced with Part Number 6272, 3455779, C.R. Laurence
Minimize
|
|
|
|
Provides Protection to Glass Surface This CRL 1/2" Replacem
... Read more
Provides Protection to Glass Surface This CRL 1/2" Replacement Washer is intended to protect the glass surface between the standoff cap and the standoff base. Color: Clear Vinyl Outside Diameter: 1/2 in (12 mm) Inside Diameter: 1/4 in (6 mm) Additional Product Information: This Replacement Washer is...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL 1/2" O.D. Clear Vinyl Replacement Washer with Large Hol
... Read more
CRL 1/2" O.D. Clear Vinyl Replacement Washer with Large Hole, SW012L, C.R. Laurence
Minimize
|
|
|
|
For Use with All 3/4" Standoff Bases These CRL Lock Washers
... Read more
For Use with All 3/4" Standoff Bases These CRL Lock Washers are available in both Stainless and Zinc finishes, and are used with applicable 1/4"-20 Hex Nuts for mounting 3/4 Inch (19 millimeter) Standoff Base assemblies. Finish: Stainless Overall Diameter: 1/4-20
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL Zinc 5/16"-18 Thread Size Hex Nuts, HN51618Z, C.R. Laur
... Read more
CRL Zinc 5/16"-18 Thread Size Hex Nuts, HN51618Z, C.R. Laurence
Minimize
|
|
|
|
For Use with All 1/2" Standoff Bases These CRL Stainless Fl
... Read more
For Use with All 1/2" Standoff Bases These CRL Stainless Flat Washers are used with 10-24 Hex Nuts when attaching our 1/2 Inch Standoff Bases to panels or substrates. Finish: Stainless Overall Diameter: 7/16 in (11 mm)
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Somaca/CRL 1/2" Fixed Corner Keys With Hook - Replaced wi
... Read more
Somaca/CRL 1/2" Fixed Corner Keys With Hook - Replaced with Part Number 6269, 3455465, C.R. Laurence
Minimize
|
|
|
|
5/16"-18 Thread Size for Use with 1-1/4" Standoff Threaded
... Read more
5/16"-18 Thread Size for Use with 1-1/4" Standoff Threaded Rods or Allen Screws These CRL Stainless Hex Nuts are available in both Stainless and Zinc finishes, and are used with applicable Flat Washers and/or Lock Washers to attach 1-1/4" Standoffs . Can also be used to reshape threads after cutting...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL 1/2" O.D. Clear Vinyl Replacement Washer with Small Hol
... Read more
CRL 1/2" O.D. Clear Vinyl Replacement Washer with Small Hole, SW012S, C.R. Laurence
Minimize
|
|
|
|
Provides Protection to Glass Surface This CRL 3/4" Replacem
... Read more
Provides Protection to Glass Surface This CRL 3/4" Replacement Washer is intended to protect glass surfaces between the standoff cap and the standoff base. It is designed to work with 3/4 inch (19 millimeter) Standoff Cap Assemblies . Outside Diameter: 3/4 in (19 millimeter) Inside Diameter: 1/4 in ...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL #10 Stainless Flat Washer for 1/2" Standoff's, FW10S, C
... Read more
CRL #10 Stainless Flat Washer for 1/2" Standoff's, FW10S, C.R. Laurence
Minimize
|
|
|
|
For Use with All 1-1/4" Standoff Bases These CRL Stainless
... Read more
For Use with All 1-1/4" Standoff Bases These CRL Stainless Flat Washers are used with 5/16"-18 Hex Nuts when attaching our 1-1/4 inch Standoff Bases to panels or substrates. Finish: Zinc Overall Diameter: 3/4 in (19 mm) 5/16"-18 Hex Nuts are available in Stainless (Cat. No. HW51618S ) and Zinc (Cat....
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
Somaca/CRL 9/16" Fixed Corner Keys With Hook - Replaced w
... Read more
Somaca/CRL 9/16" Fixed Corner Keys With Hook - Replaced with Part Number 6270, 3455468, C.R. Laurence
Minimize
|
|
|
|
5/16"-18 Thread Size for Use with 1-1/4" Standoff Threaded
... Read more
5/16"-18 Thread Size for Use with 1-1/4" Standoff Threaded Rods or Allen Screws These CRL Stainless Hex Nuts are available in both Stainless and Zinc finishes, and are used with applicable Flat Washers and/or Lock Washers to attach 1-1/4" Standoffs . Can also be used to reshape threads after cutting...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL Truck Cap Interior L-Handle, 75504, C.R. Laurence
|
|
|
|
For Use with All 1-1/4" Standoff Bases These CRL Lock Washe
... Read more
For Use with All 1-1/4" Standoff Bases These CRL Lock Washers are available in both Stainless and Zinc finishes, and are used with applicable 5/16"-18 Hex Nuts for mounting 1-1/4 Inch Standoff Base assemblies. Finish: Zinc Overall Diameter: 5/16"-18 5/16"-18 Hex Nuts are available in Stainless (Cat....
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL Stainless Flat Washers for 1-1/4" Standoffs, FW516S, C
... Read more
CRL Stainless Flat Washers for 1-1/4" Standoffs, FW516S, C.R. Laurence
Minimize
|
|
|
|
Protects Glass from Chipping Prevents Shelves from Moving C
... Read more
Protects Glass from Chipping Prevents Shelves from Moving CRL Rubber Cushion is used with acrylic rests. The Cushions fit into a hole on the rests to cushion the glass and protect against scratching, and to prevent the glass shelf from sliding from side-to-side. These Rubber Cushions work with CRL S...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL 3/4" Clear Vinyl Replacement Washer for 3/4" Standoff C
... Read more
CRL 3/4" Clear Vinyl Replacement Washer for 3/4" Standoff Cap Assemblies , HW058, C.R. Laurence
Minimize
|
|
|
|
For Use with 1-1/2" and 2" Standoff Bases These CRL Lock Wa
... Read more
For Use with 1-1/2" and 2" Standoff Bases These CRL Lock Washers are available in both Stainless and Zinc finishes, and are used with applicable 3/8"-16 Hex Nuts for mounting 1-1/2 inch and 2 inch (38.1 and 50.8 millimeter) Standoff Base assemblies. Finish: Stainless Size: 3/8"-16
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|
|
CRL Stainless Lock Washers 3/8"-16 for 1-1/2" and 2" Stand
... Read more
CRL Stainless Lock Washers 3/8"-16 for 1-1/2" and 2" Standoff's, LW38S, C.R. Laurence
Minimize
|
|
|
|
Available in Lengths From 3/16" to 3" (4.8 to 76.2 mm) All
... Read more
Available in Lengths From 3/16" to 3" (4.8 to 76.2 mm) All Stainless Steel This CRL Stainless Steel Allen Screw is available in incremental lengths from 3/16 to 3 inches (4.8 to 76.2 millimeters) and is typically used with CRL Standoffs, Hand and Foot Rail Brackets. Length: 3/16 in (4.8 mm) Thread S...
Minimize
Fantastic prices with ease & comfort of Amazon.com!
|
|
|