> TV Accessories > tv/store csn stores

This TV stand for flat screens is capable of displaying ver ... Read more

This TV stand for flat screens is capable of displaying vertical and horizontal TVs. The floor-standing fixture holds a monitor up to 50" in size that weighs less than 150 pounds. This TV stand for flat screens has an internal storage area for wires. 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket This mobile TV stand for flat screens can be used in a variety of indoor locations, including trade shows and retail stores. This LCD display tower can be assembled in 11 easy steps, and the bracket mounts by performing 4 simple tasks. This easy assembly helps to cut down on the amount of setup time significantly. This quality TV stand for flat screens measures 45"w x 76"h x 36"d. With the TV bracket installed, this unit weighs 73.5 lbs. The mounting brackets are VESA compatible and plasma monitors that measure up to 50" and weigh less than 150 lbs. can be mounted (limitations on the size of the monitor depend on usability of the shelf, orientation mounting selection, VESA size, stand height, and actual weight of the TV). Two sets of different sized horizontal bars are included, enabling users to select a set of bars that hold a TV in horizontal or vertical orientation and reduce or eliminate TV bracket visibility from the front. This TV stand for flat screens that can be used as a piece of furniture or entertainment center has a cast aluminum frame and comes with spacers, screws, and washers to attach an LCD monitor to the mounting arms. The included TV mounting hardware fits a wide range of monitors, but you may need to visit your local hardware store should your TV require special hardware. The mounting plate on this TV stand for flat screens does not raise/lower using an Allen wrench. This is accomplished with a ratcheting box wrench, which is included with the unit. The Hex wrench is used to install the (4) screws that hold the VESALG bracket. The vertical movement feature is hidden by a decorative snap-on cap and secured with lanyard to prevent loss. This LCD display rack, TV stand for flat screens that can be stored in a corner can support up to 50 lbs. of material on its shelf. The height adjustable and removable shelf makes this structure versatile for digital advertisements, lectures and seminars, presentations, medical procedures, or trade shows. This attractive unit can be situated strategically at the entrance of any venue or angled in the corner of a room to inform people of your message and make that space more appealing. This durable plastic shelf measures 22"d x 16-7/8"w and has (4) slots, which can be used to safely secure electronics and devices. This TV stand for flat screens that hides cords and cables, also known as a portable workstation, provides an organized workspace. Two back panels safely enclose any wires that need to be plugged into a wall outlet to power electronic devices used with this entertainment center. Wires are inserted from the top for TV or the middle for peripherals and exit from the middle or bottom as required. When all cables are contained inside the panel, there is less of chance of wires becoming tangled and knotted. Another feature of this TV stand for flat screens is the front locking wheels that prevent the structure from moving. Dual wheels with polyurethane tires allows for easier starting/rolling, is more durable than rubber and is quieter when operating. This furniture entertainment center unit is the best choice for any cost-effective mobile demonstration! Buy this TV stand for flat screens before 1pm EST for same day shipping options. Click here for assembly instructions. Click here for bracket installation instructions. Dimensions: Overall: 45"w x 76"h x 36"d Minimize

These flat TV stands holds a 42 to 72 inch flat screen tele ... Read more

These flat TV stands holds a 42 to 72 inch flat screen television that is less than 80 pounds. The floor-standing fixtures include tilting bracket to adjust the angle of a displayed monitor. These flat TV stands are VESA-compatible with most televisions. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Stand Tilts with Ease! Flat TV stands are perfect for use at trade shows, retail stores, and offices. These flat TV stands, also known as an LCD stand and a plasma TV stand, include a VESA LG bracket for mounting 42" to 72" plasma or LCD televisions that weigh up to 80 lbs. We include the necessary hardware to mount most televisions to the bracket, however some may need specific screws you can buy at a local hardware store. These plasma stands, flat TV stands have a silver finish to easily blend in with any surrounding. This LCD mount is manufactured from MDF and aluminum to withstand high traffic areas as well as managing to hold your Samsung or any other brand that is compatible. These flat TV stands can mount a 70" Samsung television that will increase your customer support at a tradeshow or event. This LCD bracket is VESA LG compatible which includes necessary hardware however you may need to purchase additional hardware to mount your television. This LCD mount will go with any television between 42" and 72" as long as the weight is below 80 lbs. Also include is a tilt mechanism to allow for better viewing angles. These LCD stands, flat TV stands come with (4) plastic strips that allow you to hide wires along the back of the pole to help keep them out of view. The flat TV stands feature a large, rounded base that provides the display with stability, perfect for use in areas with heavy traffic. These flat TV stands are shipped unassembled to keep shipping costs lower, and can easily be put together in a few minutes with only simple tools required. The rounded base of this flat screen stand is made from MDF, while the extrusion that holds up your television is made from aluminum. Dimensions: Overall: 37-7/16"w x73"h x 24"d Base: 37-7/16"w x 1"h x 24"d Television size: 42" to 72", weighing up to 80 lbs. VESA: 200mm x 200mm to 600mm x 400mm Weight: 39 lbs. Minimize

These LCD TV stands have a large kidney-bean shaped display ... Read more

These LCD TV stands have a large kidney-bean shaped display shelf that measures 40 inches wide. The floor-standing television racks are made from silver aluminum and includes a tilting bracket. The portable LCD TV stands hold a 32 to 42 inch monitor. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Plasma stands, LCD TV stands are ideal for use by retail stores or at trade shows. These LCD TV stands have been designed to hold a 32" to 42" plasma or LCD TV that weighs up to 70 lbs. A television display has a 200 x 200 VESA bracket that fits most makes and models of televisions. These LCD TV stands also include the necessary hardware to mount most televisions onto the bracket, though some may need specific screws you can buy at any local hardware store. Monitor stands, LCD TV stands make presentations easy and helps to capture the attention of passersby. Stand Tilts with Ease! These LCD TV stands have a large shelf included that can be used to hold a laptop for presentations of other materials. The flat screen displays, LCD TV stands come with wheels that can be attached to the base of your stand. These wheels allow you to easily maneuver the stand, and can be locked into place to provide a stable display. This LCD TV stands also feature a tilting mount that allows you to angle your television down or up for a better viewing angle. These plasma stands, LCD TV stands include (4) plastic strips that go along the pole to help keep unsightly wires in place. Dimensions: Overall: 30"w x 74-11/16"h x 16-1/2"d Base Size: 30"w x 1-5/16"h x 16-1/2"d Shelf Size: 40"w x 5/8"h x 15-3/4"d in middle, 17-3/4"d at deepest areas Television Size: 32" to 42", less than 70 Lbs. VESA: 200mm x 200mm Weight: 62 lbs. Minimize

Wildon Home CSN4139E Triangular design gives this media fir ... Read more

Wildon Home CSN4139E Triangular design gives this media fireplace a unique look. Two glass front side storage cabinets provide storage. One large open shelf for media equipment with opening in the back for cord management. A collapsible back panel allows this unit to be used in a corner or along a flat wall. This unit does not require a contractor or electrician for installation enabling for an instant remodel of your home. Features: -Ivory finish. -Cord management hole in back of unit. -Mantel supports up to 85 lbs. -Accommodates up to a 50" flat screen TV. -Mantel supports up to 85lbs. -Constructed of poplar wood, MDF and PB with veneer. -Assembly required. -Remote control (2 AAA Batteries Required). -Realistic flickering flame effect. -Long life LED lights. -120V-60Hz, 1500W / 5000 BTUs, 12.5 Amp. -Easy to use adjustable thermostat. -Safety thermal overload protector. -Adjustable flame brightness control. -Plugs into standard wall outlet. -Tested to heat 1500 cubic feet in only 24 minutes (14'x14'x8'). -100% energy efficient with low operating costs. -Produces zero emissions or pollutants. -Eco friendly, consuming no wood or fossil fuels. -No combustion, glass remains cool to the touch. Specifications: -48" W x 15.75" D x 32.25" H (Flat Wall). -48" W x 27" D x 32.25" H (Corner). -Triangular media storage shelves- 8" W x 7.5" D x 8" H. -Media equipment storage shelf- 23" W x 13" D x 5" H. -Firebox front - 23" Wide x 20" Tall. -Two adjustable shelves can move up or down 2". Minimize

This TV wall mount displays a flat-screen monitor between 3 ... Read more

This TV wall mount displays a flat-screen monitor between 32 and 60 inches, that weighs less than 88 pounds. The VESA-compatible bracket should fit most brand names. This low profile TV wall mount measures only 1 inch from a wall. Easy setup! 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket This is a plasma flat screen rack, space saving TV wall mount, that is VESA compatible and can fit any configuration up to 600mm x 400mm, including 300mm x 300mm! A flat panel television can be situated up high, closer to the ceiling for informative product displays in retail stores! Businesses are able to then utilize the space underneath for accessories or information stands. A TV wall mount, like this low profile plasma monitor rack, can be used in a house for digital entertainment or in a business for demonstration purposes! In a professional setting, appropriate monitors can be positioned together in an even row, producing a uniformed line of flat screen television brackets that can be used to present pertinent facts that must be communicated. Image slideshows or quick installation videos of any promoted group of accessories can be displayed on these plasma stands as well! This LCD flat panel holder, ultra-slim TV wall mount, can accommodate any 32" to 60" television that weighs less than 88lbs. This flat screen plasma holder can be displayed vertically or horizontally, where the uppermost set of mounting holes on the back of the monitor are used for secure installation! This TV wall mount that has 3 simple installation steps includes easy tolerance mounting disks. These added pieces of hardware enable the installer to line up the drilled hole inside the mounting slot by rotating accordingly, even if the initial puncture is a bit off center. This stationary LCD bracket, TV wall mount that comes with a bubble level, has simple installation steps that can be followed for quick setup as well! A manual pull is attached to each of these flat screen brackets that are used when detaching the mountable arm. When this step is completed, the installer can install the white bracket at the desired location, fasten the isolated black piece to the back of the display, position the two pieces together again and adhere the circular hanging device to any space on the back of the flat panel monitor. This TV wall mount that is crafted from steel has a white, neutral finish which is practical for residential and commercial use! Customers resourcefully integrate this affordable and attractive LCD television holder in practically any space that needs a monitor to digitally display accessories! There are hundreds of articulating brackets that tilt, most of which have easy installation steps so be sure to browse the entire selection to find the best fit for you! Click here for assembly instructions. Dimensions: Overall (w/o mounting plate): 22"w x 7-1/2"h Overall (w/ mounting plate): 25-1/2"w x 7-1/2"h Distance from Wall: 1" Television Size: 32" to 60", weighing less than 88 lbs. VESA Compatible: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm & 600mm x 400mm Weight: 5.5 lbs. Minimize

These TV stands holds a 31 to 42 inch flat screen monitor t ... Read more

These TV stands holds a 31 to 42 inch flat screen monitor that weighs less than 70 lbs. Optional wheels give users the ability to reposition the fixture throughout a room. These TV stands are compatible with 200x200 VESA standards. Tilt bracket included. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. TV stands, like LCD stands or plasma stands, are perfect advertising tools for malls, retail stores, and trade shows. These TV stands come with a 200 x 200 VESA bracket . Fitting most brands of televisions, this VESA bracket is a standard mount that can securely hold a 31" to 42" screen that weighs less than 70 Lbs. We include the necessary hardware to mount most televisions on the bracket. Certain televisions will need other screws that you can get at any local hardware store. These TV stands feature a hollow pillar to hold up the screen. This hollow pillar keeps wires out of view with (4) plastic strips, keeping your display free from mess. Screen stands, TV stands are sure to grab the attention of passersby, effectively promoting your business to potential customers. Stand Tilts with Ease! These TV stands, also known as LCD stands and screen stands, are made from rust proof aluminum. Great for high traffic areas, this aluminum has a satin silver finish to coordinate beautifully with a variety of decors. These monitor display stands, TV stands also come with a tilting bracket, giving customers a better view of the screen. The TV stands have a wide base to offer great stability to the display. These plasma stands are the perfect TV stands to advertise in an exciting manner that is sure to earn you new customers! Dimensions: Overall: 30"w x 74-11/16"h x 16-1/2"d Base Size: 30"w x 1-5/16"h x 16-1/2"d Television Size: 31" to 42", less than 70 Lbs. VESA: 200mm x 200mm Weight: 44 lbs. Click Here for Assembly Instructions. Minimize

This TV stand is equipped with a 200x100 VESA compatible br ... Read more

This TV stand is equipped with a 200x100 VESA compatible bracket for displaying a 23" to 30" flat screen television. The tilt adjusts your monitor to the best viewing angle possible. This TV stand includes locking wheels and strips to conceal cables. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Stand Tilts with Ease! These TV stands, also called an LCD stand or a plasma stand, are shipped with a 200 x 100 VESA mounting bracket , capable of holding a television from 23" to 30" that weighs less than 50 Lbs. VESA brackets are a standard mounting bracket that fit most televisions. We include the necessary hardware to mount most televisions on the bracket, however, certain televisions will need other screws that you can get at any local hardware store. These TV stands have a tilt mount for angling your flat television screen to ensure the best possible viewing for passersby. Trade shows, retail stores, and malls will all find these TV stands to be a great marketing tool. Flat screen displays, TV stands are a great eye-grabbing alternative to traditional poster stands. This LCD floor mount, television bracket is the top seller units suited for your Panasonic. These TV stands can mount a 23" LCD for optimal viewing of your displayed images, video or live cable. This LCD mount is VESA compatible making it ideal for Panasonic televisions. Mounting a 23" Panasonic TV to this stand will captivate the attention of passersby and draw them into your display. This LCD television bracket can be displayed in any location and will appeal to current and future customers. These TV stands, like a plasma stand and an LCD screen stand, use a hollow pillar to hold up your television. You can place the wires for the TV through this pillar, hiding them from passersby using (4) plastic strips, and keeping the upscale look of the display intact. This TV stands feature a wide base, to help provide stability for your display. These plasma stands, TV stands are made from brushed aluminum with a satin silver finish. Durable aluminum holds up well in high traffic locations, making it a perfect TV stand for a busy marketplace or high volume trade show. These flat screen stands are the perfect TV stands to show your customers products or valuable business information in an exciting way. Dimensions: Overall: 24"w x 50-11/16"h x 16-1/2"d Base Size: 24"w x 1-5/16"h x 16-1/2"d Television Size: 23" to 30", less than 50 Lbs. VESA: 200mm x 100mm Weight: 33 lbs. Click Here for Assembly Instructions. Minimize

Protect your valuable LCD/Plasma Flat Panel TV from dust, d ... Read more

Protect your valuable LCD/Plasma Flat Panel TV from dust, debris, fingerprints, static, moisture, wind, and other contaminants. These dust covers are custom made to fit the dimensions of most 55 inch LCD/Plasma Flat Panel TVs. Each cover has an open bottom and slips over the top of your television, which can easily be folded and stored when not in use. The dust cover design also features an opening centered on the back side to accommodate any wall mounting. Made from your choice of 5 colors of nylon, 3 colors of cotton, or premium vinyl and quilted options that give you an extremely sturdy and durable cover. These covers are machine sewn with heavy duty thread to make sure they will never fray or come apart, and are double hemmed around the bottom to ensure a good fit. A great way to ensure your expensive equipment will last a long time! Other options include Velcro bottom and remote pocket! Minimize

This swivel TV mount holds an LCD monitor between 32 and 60 ... Read more

This swivel TV mount holds an LCD monitor between 32 and 60 inches. The articulating bracket has a full range of motion, easily pivoting from left to right. The swivel TV mount also tilts up or down 15 degrees. VESA compatible! 99 pound capacity. 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket A swivel TV mount, like this LCD wall bracket, provides many exclusive features to all users that other models simply cannot offer! The bracket and arm have an all-black finish which complements any environment well! This plasma panel support, swivel TV mount that secures into a wall stud can be situated in close proximity to a corner in order to provide distant viewing to customers and guests within a retail store! When positioned higher up, the arm can be adjusted and the bracket can tilt to angle downward in order to angle the monitor accordingly! This flat screen wall configuration, swivel TV mount that can tilt is also integrated into residential settings for personal use! Conveniently, this plasma panel holster ships fully assembled and is ready to be installed directly out of the box! Although this is a swivel TV mount that holds a 60" flat panel screen, the minimum size monitor that can be mounted is a 32", weighing less than 99 lbs! As electronic companies continue to evolve, lighter displays are beginning to transpire now more than ever! This range of monitor sizes is considerable and realistic for most LCD screens available on the market today! This plasma holder, swivel TV mount for corner use secures flat against a wall and once installed properly, the arm manually adjusts effortlessly! Home owners appreciate this bracket as well and find creative places within homes to showcase a larger LCD plasma! When situated flush against a partition, this strong, low-profile swivel TV mount that has a movable arm measures 2" off the wall and can extend to 17-1/2"! The above features incorporated into system altogether combine to create an affordable, cost-effective arrangement for virtually any type of user! Click here for mounting instructions. Dimensions: Bracket: 27"w x 17"h Distance from Wall: 2" - 17-1/2" (fully extended) Television Size: 32" to 60", weighing less than 99 lbs. VESA Compatible: 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm Weight: 13.5 lbs. Minimize

Flat screen TV mounts stick out only 1.5" from a wall. The ... Read more

Flat screen TV mounts stick out only 1.5" from a wall. The included magnetic level makes sure your presentation is straight. These flat screen TV mounts hold a 26" to 55" monitor. The brackets tilt to combat glare and to accommodate any location. 100mm x 100mm Standard TV Sizes In Relation To MNTT202 Bracket 200mm x 100mm Standard Television Sizes In Relation To MNT T202 Bracket 200mm x 200mm Standard Television Sizes In Relation To MNTT202Bracket 300mm x 300mm Standard Television Sizes In Relation To MNTT202 Bracket 400mm x 200mm Standard TV Sizes In Relation To MNTT202 Bracket 400mm x 300mm Standard Television Sizes In Relation To MNTT202 Bracket 400mm x 400mm Standard Television Sizes In Relation To MNTT202 Bracket 600mm x 400mm Standard Television Sizes In Relation To MNTT202 Bracket Flat screen TV mounts have an ultra slim profile that sticks out only 1-1/2" from a wall without the monitor. These plasma brackets, flat screen TV mounts offer a sleek way to mount your plasma or LCD television onto a wall. These flat screen TV mounts can hold a 26" to 55" plasma or LCD television that weighs up to 99 lbs. We include the necessary screws to attach most televisions to this mount, though some may need specific screws you can purchase at any local hardware store. Flat screen TV mounts are VESA compatible for 100mm x 100mm to 600mm x 400mm. VESA standards are agreed upon between manufacturers of mounts and brands so that mounting holes on televisions are the same across brands. Plasma TV mounts, LCD brackets, and other flat screen TV mounts allow you to tilt your television down up to 12 degrees. Titling your plasma or LCD television allows you to provide a better viewing angle. Flat screen TV mounts also include a locking mechanism on the bottom of each arm that helps to hold the mounting arms onto the bracket. An included level for this flat panel mount helps with installation onto wood studs and solid concrete walls. If you have any questions regarding installation on your wall type, please consult a professional. Buy flat screen TV mounts today to hang a television on your wall and open up more floor space! Dimensions: TV Bracket: 26-3/8"w x 8-3/4"h Wall Mounting Plate: 18-1/8"w x 7-5/8"h Television Size: 26" to 55", weighing up to 99 lbs. VESA: 100mm x 100mm - 600mm x 400mm Weight: 4 lbs. Minimize

This TV wall bracket has a low profile, standing only 1/2" ... Read more

This TV wall bracket has a low profile, standing only 1/2" off a wall. The VESA compatible bracket is designed to fit most televisions ranging in size from 10" to 32". The TV wall bracket can hold a monitor weighing up to 55 pounds. 75mm x 75mm Standard TV Sizes In Relation To MNT3655M1 Bracket 100mm x 100mm Standard TV Sizes In Relation To MNT3655M1 Bracket 200mm x 100mm Standard Television Sizes In Relation To MNT3655M1 Bracket This TV wall bracket is perfect for smaller televisions. The TV wall bracket, also known as a flat panel wall mount, will move your flat screen TV off your desk, counter, or TV stand and up onto a wall! The TV wall bracket saves space, and adds a modern, stylish touch to any environment. A small TV wall bracket is ideal for mounting televisions in various spaces. Use the TV wall bracket in your office to wall mount your computer monitor. The TV wall bracket is great for hotels to mount televisions in guest rooms, restaurants or bars to hang monitors to broadcast sports games or digital signage, and even convenience stores or gas stations could use a TV wall bracket to hang televisions with live gaming, like Keno. This flat panel bracket, TV wall bracket is a simple, low-profile bracket, ideal for 10" to 32" TV's. The bracket features a slide-load design, allowing you to simply slide your TV onto the bracket, once you have affixed the adapter bracket to your TV. This wall bracket is VESA compatible from 50x50 to 200x100. The flat panel bracket can accommodate TV's weighing up to 55 lbs. We sell this TV wall bracket with all the necessary hardware for wall mounting, including hardware to attach the adapter bracket to your TV (please note that some TV's may require specific hardware that can be found at your local hardware store). If you have any questions regarding mounting this TV wall bracket on your specific wall type, please consult a professional. Dimensions: Wall Plate: 3-7/8" diameter Adapter Bracket: 8-1/2"w x 5-1/4"h Weight: .5 lbs. Minimize

This TV bracket rotates 360 degrees! The low profile wall m ... Read more

This TV bracket rotates 360 degrees! The low profile wall mount holds a flat-screen monitor between 23 and 42 inches. This rotating TV bracket is VESA compatible to fit most brand names. The mount measures only 43mm from a wall. Easy assembly! 100mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket Easily Rotates Without Removing from Wall A TV bracket, similar to this plasma mount design, presents many unique features to any type of user continuously! The low-profile design will always stand 43mm (1.69") off any wall, an adequate amount of space for HDMI cables and connection cords that are used to power components and accessories! While most wall mountable supports only attach a monitor to the stand, this unique TV bracket that has an integrated locking mechanism which will lock and secure an LCD display safely! This added security feature is most valued by businesses that position this type of plasma screen within store locations to provide additional product or service information to guests! By protecting expensive electronics, owners can be assured that the most common theft occurrences that surface from unsecured large screen televisions will be eliminated! This durable flat panel holder, TV bracket that accommodates a monitor up to 42" and will replace the large, bulky monitor base that is often included with an LCD screen purchase! Almost all types of wall mount configurations can help to save space that typical entertainment centers occupy considerably! A VESA compatible stand, like this TV bracket that adjusts to fit smaller and larger displays will support a monitor measuring up to 400mm x 400mm! The plasma screen can be situated in vertical or horizontal orientation as well, which is a useful feature and can be regulated to harmonize with any type of viewable presentation! This LCD wall stand, TV bracket features 360 degrees rotation and can swivel depending on the nature of use! Although this component is most commonly utilized by businesses during graphical demonstrations, home owners even enjoy the rotating attribute when using a smart LCD monitor with Internet connectivity! Web pages and media can be viewed in portrait format which provides more space top to bottom for viewable web content! In addition to residential settings, this TV bracket can also be used on a wall in an office, retail store, airport, trade show, casino or any other type of relevant setting! Click here for assembly instructions. Dimensions: Bracket: 17-11/16"w x 17-11/16"h Distance from Wall: 43mm Television Size: 23" - 42", weighing less than 110 lbs. VESA Compatible: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 400mm x 200mm, 400mm x 400mm Weight: 8.5 lbs. Minimize

Protect your valuable LCD/Plasma Flat Panel TV from dust, d ... Read more

Protect your valuable LCD/Plasma Flat Panel TV from dust, debris, fingerprints, static, moisture, wind, and other contaminants. These dust covers are custom made to fit the dimensions of 50-52 inch LCD/Plasma Flat Panel TVs. Each cover has an open bottom and slips over the top of your television, which can easily be folded and stored when not in use. The dust cover design also features an opening centered on the back side to accommodate any wall mounting.Made from your choice of 5 colors of nylon, 3 colors of cotton, or premium vinyl and quilted options that give you an extremely sturdy and durable cover. These covers are machine sewn with heavy duty thread to make sure they will never fray or come apart, and are double hemmed around the bottom to ensure a good fit. A great way to ensure your expensive equipment will last a long time! Other options include Velcro bottom and remote pocket! Minimize

This TV wall bracket is VESA compatible to hold most televi ... Read more

This TV wall bracket is VESA compatible to hold most televisions ranging in size from 32" to 50". The mount has a large range of motion, tilting and adjusting the angle of your monitor. This TV wall bracket can hold up to 132 pounds. 200mm x 200mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 300mm x 300mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 200mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 300mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 400mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 600mm x 400mm Standard Television Sizes In Relation To W2AM3250M3 Bracket Product Specifications TV Size Range: 32" - 50". Weight Capacity: 132 lbs. Distance From Wall: 4-1/4" - 14-3/4" (fully extended). VESA Compatible: 200x200; 200x100; 300x300; 400x200; 400x300; 400x400; 600x400. Downward Tilt: 15 degrees. Color: Black w/ chrome accents. A TV wall bracket includes plastic clips to help guide wires coming from your television to the wall. This helps you keep a tidier display without wires just hanging down; grouping them together allows you to more easily keep them out of sight. An LCD wall mount, TV wall bracket can hold a 32" to 50" television that weighs up to 132 lbs. This TV wall bracket is VESA compatible and we include the necessary hardware for attaching your screen to the bracket, though some may need specific screws that can be purchased at any local hardware store. A TV wall bracket, also known as a plasma mount and LCD bracket, has articulating arms that allow you to position the mount as you need, either flush with the wall or extended out. This plasma mount, TV wall bracket has tilting arms that allow you to angle your television up to 15 degrees down. A TV wall bracket also includes a clip on level that allows you to ensure you screen is parallel to the floor. A plasma mount, TV wall bracket has plastic covers to hide the screws going into the wall to create a more pleasant looking display. An LCD mount is an ideal TV wall bracket for use in offices, restaurants, bars, or homes. Dimensions: TV Bracket: 28-3/8"w x 7-1/4"h Wall Mounting Plate: 19-1/8"w x 8-1/2"h x 1/2"d Flush with Wall: 5-3/4" Fully Extended: 15-3/4" Weight: 21-1/2 lbs. Minimize

Protect your valuable LCD/Plasma Flat Panel TV from dust, d ... Read more

Protect your valuable LCD/Plasma Flat Panel TV from dust, debris, fingerprints, static, moisture, wind, and other contaminants These dust covers are custom made to fit the dimensions of 32 inch LCD/Plasma Flat Panel TVs. Each cover has an open bottom and slips over the top of your television, which can easily be folded and stored when not in use. The dust cover design also features an opening centered on the back side to accommodate any wall mounting.Made from your choice of 5 colors of nylon, 3 colors of cotton, or premium vinyl and quilted options that give you an extremely sturdy and durable cover. These covers are machine sewn with heavy duty thread to make sure they will never fray or come apart, and are double hemmed around the bottom to ensure a good fit. A great way to ensure your expensive equipment will last a long time! Other options include Velcro bottom and remote pocket! Minimize

dellnav Store Your Low Vision Store - Magnifying Aids! TV S ... Read more

dellnav Store Your Low Vision Store - Magnifying Aids! TV Screen Enlarger Low Price Guarantee! An optometrically tested and approved screen that can double the size of your TV (CRT) screen. Provides exceptional color, brightness and clarity. Durable acrylic - easy to keep clean. Mounts by simply sliding the braces under your TV (CRT) set. Not designed for consoles. Measures 30" diagonal for 25" to 30" TV screens. Weight: 3.3 lbs. Fits 25" to 30" Diagonal Magnification: 2X #107095 For more infor Minimize

This TV mount and shelf is for wall mounting. The VESA-comp ... Read more

This TV mount and shelf is for wall mounting. The VESA-compatible bracket displays a flat-screen monitor between 10 and 32 inches. The black TV mount and shelf includes 16.5-inch-wide display shelf that is height-adjustable. Perfect for home use! 75mm x 75mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 100mm x 100mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 200mm x 100mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 200mm x 200mm Standard Television Sizes In Relation To VMWS12SHCL Bracket This is a home theater wall stand, economical TV mount and shelf, that holds up to 22 lbs. of electronics on the glass counter. The flat panel bracket component fits any display up to 32" that weighs less than 66 lbs. and can be uniquely positioned out of the way, near a corner! This LCD monitor rack, flat panel TV mount and shelf, has a 16-1/2"w x 11-3/4"h glass ledge that is height adjustable. This feature provides more room for a larger LCD monitor screen display or taller components. This TV mount and shelf that can be used as part of a home theater system is essential for those that have minimal space, such as a tenant in a studio apartment. When properly mounted, the glass ledge measures 13-1/2" off the wall. Many customers feel that this unique feature is a major incentive to purchase this flat panel holder! This plasma screen wall bracket, TV mount and shelf that can be positioned in a corner, is ideal for creating a cost-effective, space-saving home theater arrangement. When incorporating this flat panel/dvd player holder combo unit into a family entertainment space, the initial design and layout process is easier, which can allow the user to become more creative! A TV mount and shelf, such as this LCD monitor bracket, is also used in retail spaces to promote new products or services! This LCD plasma screen rack is often used by stores that would like to show off the features of a new product line digitally! Users have the unique option of providing a literature holder on the glass top for handy go-to information as well! This strong stand can also be used in the lobby of a business or next to a corner of showroom! This is a TV mount and shelf that is made from tempered glass , is VESA compatible and can fit a range of monitors that measure between 10" - 32". All necessary hardware is included with this holder, the only tools that are needed for installation are those that are used to drill this bracket into a desired location! Order a corner TV mount and shelf now for your dvd player or collection of electronics! Click here for assembly instructions ! Dimensions: Overall: 16-1/2"w x 24"h x 13-1/2"d Shelf: 16-1/2"w x 11-3/4"h x 1/4"d (3) Silver Disks: 1-1/8"d TV Bracket: 8-1/2"w x 8-1/2"h Monitor Size: 10" - 32", weighing less than 66 lbs. VESA Compatible: 50x50, 75x75, 100x100, 200x100, 200x200 Wall Bracket: 2-13/16"w x 24"h x 1-5/16"d Maximum Weight Capacity: 22 lbs. Weight: 8 lbs. Materials Used: Aluminum column, steel and glass shelf, steel television bracket Minimize

This TV wall mount has an articulating arm that rotates, ti ... Read more

This TV wall mount has an articulating arm that rotates, tilts and swivels. This black television bracket holds a flat-screen monitor between 10 and 32 inches in size. The articulating TV wall mount is VESA compatible with 50x50, 100x100 and 200x200. 100mm x 100mm Standard Television Sizes In Relation To W1AM1032M3 Bracket Product Specifications TV Size Range: 10" - 32". Weight Capacity: 55 lbs. Distance From Wall: 3" - 8-1/2" (fully extended). VESA Compatible: 50x50; 100x100, 200x200. Downward Tilt: 20 degrees. Color: Black. This TV wall mount can hold a 10" to 32" plasma or LCD television that weighs up to 55 lbs. Included with the plasma mount is all the necessary hardware to mount most televisions, though some may require certain screws that can be purchased at any local hardware store. This TV wall mount, also known as a plasma mount and an LCD mount, is compatible for VESA standard 50 x 50 to 100 x 100. This TV wall mount also has extending arms for up to VESA 200 x 200 to fit larger screens. The LCD mount, TV wall mount has stylish black plastic coverings for keeping the screws used to mount your display onto the wall out of sight. A plasma mount, TV wall mount has an articulating arm that allows you to position your monitor exactly where you want it. This articulating arm allows you to tilt the screen down for a better view. The large range of motion provided also allows you to tilt your monitor down up to 20 degrees and extend the arm out up to 9-1/8". This TV wall mount has clips that hold wires coming from the monitor to the arm to keep them neat. Dimensions: Bracket: 4-5/8"w x 4-5/8"h Bracket (with Extending Arms): 8-1/2"w x 8-1/2"h Wall Mounting Plate: 1-1/2"w x 6-1/8"h Weight: 2-1/2 lbs. Minimize

This TV mount holds a flat-screen monitor between 23 and 60 ... Read more

This TV mount holds a flat-screen monitor between 23 and 60 inches. The low profile bracket has a tilting mechanism to adjust the angle of a displayed television. This black TV mount is VESA compatible to fit most monitor brands. Universal design! 200mm x 200mm Standard Television Sizes In Relation To WMB9400 LCD mounts 300mm x 300mm Standard Television Sizes In Relation To WMB9400 plasma bracket 400mm x 200mm Standard Television Sizes In Relation To WMB9400 TV mount 400mm x 300mm Standard Television Sizes In Relation To WMB9400 flat screen holder 400mm x 400mm Standard Television Sizes In Relation To WMB9400 plasma bracket 600mm x 400mm Standard Television Sizes In Relation To WMB9400 flat panel mount This TV mount has a universal design to hold most television sizes. The flat panel bracket is VESA compatible for 200mm x 200mm through 600mm x 600mm. The TV mount features an adjustable wall plate as well, allowing larger monitors to easily be placed on the unit. To change the length of the bracket, simply loosen the screws on the back of the plate and slide the plate until at desired width, and then retighten. This TV mount, like an articulating plasma stand, has extending brackets that allow different sizes of monitors to be installed with ease. The display arms remain hidden when used on smaller televisions, and then the extenders can be added if needed for larger monitors. The TV mount includes the necessary spacers, screws, and washers to attach most televisions to the mounting arms. Some monitors may require specific screws that can be purchased at any local hardware store. This LCD bracket, TV mount is ideal for users to place televisions in either landscape (horizontal) or portrait (vertical) format. All of the monitors available in the related products (to the right) can fit on this bracket in either format without an issue. This TV mount uses tilting arms that can be adjusted to angle down, up to 15 degrees. Angling your television will provide a better view when mounted higher up on a wall! Buy this TV mount before 1pm EST and it ships today! Click here for installation instructions. Dimensions: Wall plate (closed): 20-7/8"w x 8-3/8"h x 1"d Wall plate (open): 24-3/8"w x 8-3/8"h x 1"d Mounting Arm length: 18-3/4" Mounting Arm length (w/extenders): 24-3/4" Depth w/ mounting arms: 3-1/4" (not tilted) Television Weight: up to 132 lbs. VESA: 200mm x 200mm through 600mm x 600mm (including: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm, & 600mm x 600mm) Weight: 11 lbs. Weight: (w/extenders): 12 lbs. Minimize

Save cash on an expensive entertainment center with this Un ... Read more

Save cash on an expensive entertainment center with this Universal Mount. hang your television up for a modern look in your TV room. The tilted style makes for a more enjoyable viewing angle, as you won't be forced to look upward at the screen. Fits most 30-58-Inch televisions and can hold up to 180 lbs. Compatible with VESA standard 100, 200, 400 and 600. Mount measures 28 by 18-Inch. extends 4-Inch from the wall. All hardware is included. Built to accommodate your flat screen without any trouble. G Minimize

This bracket is for 23 to 42 inch screen size with 110lbs c ... Read more

This bracket is for 23 to 42 inch screen size with 110lbs capacity. It can swivel plus/minus 180 degrees, and tilt minus 15 degrees (down). Mounting plate extends from 41-61 inches from the ceiling. This model is available in black color only. *For 23-42 inch screen ** Supported screen size is shown as a guidance. It may be larger or smaller as long as the weight is within the limit. * Ceiling to TV: 1050mm to 1560mm (41.5" to 61") * Tilt: -15? * Swivel:360? * Load Capacity: 110lbs (50kg) * VESA max : 400 x 400mm * Mounting hardwaere included ** 1LBS = 0.454Kg, 1 inch = 25.4mm ** Minimize

This TV wall mount has a low profile design sticking out on ... Read more

This TV wall mount has a low profile design sticking out only 1 inch from the wall. The bracket is designed to hold a flat-screen monitor between 42 and 55 inches. This low profile TV wall mount holds up to 176 pounds. VESA compatible to fit any brand. 200mm x 200mm Standard Television Sizes In Relation To PLBRC32601 Bracket 300mm x 300mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 200mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 300mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 400mm Standard Television Sizes In Relation To PLBRC32601 Bracket 600mm x 400mm Standard Television Sizes In Relation To PLBRC32601 Bracket This TV wall mount that features a steel construction has a black powder coated finish. The durable flat panel plasma display is very strong and will last for years to come. The heavy duty TV wall mount is VESA compatible from 100mm x 100mm to 600mm by 400mm. VESA compatibility refers to the agreement between manufacturers of both flat screen monitors and brackets to ensure televisions and brackets will work with each other. The TV wall mount that includes screws has the necessary hardware for installation onto most surfaces. However, some screens may require specific screws available at any local hardware store. This TV wall mount for a 42" to 55" television, like a flat panel bracket, holds a monitor weighing up to 176 lbs. Nearly any plasma, LCD, or LED screen is able to be placed on this display! This flat panel plasma display, TV wall mount that features a black finish, adds style to any environment. The arms of this display have screws to secure them onto the mounting bracket. The TV wall mount features a low-profile, sticking out from the wall only 1-5/8". This heavy duty plasma unit is perfect for use in offices, hotels, schools, bars, and even homes. Order this quality TV wall mount today! Click here for installation instructions. Dimensions: Mounting Bracket: 31-1/2"w x 8-3/8"h x 1"d Mounting Arms (length): 19-3/4" Distance from Wall: 1-5/8" Television: 42" - 55", weighing less than 176 lbs. VESA: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, & 600mm x 400mm Weight: 8 lbs. Minimize

These ultra-slim TV wall mounts have a low profile - 1.625 ... Read more

These ultra-slim TV wall mounts have a low profile - 1.625 inches. The adjustable brackets accommodate monitors between 37 and 65 inches. These flat-screen TV wall mounts are compatible with VESA mounting patterns. Aluminum brackets with black finish. 200mm x 200mm Standard Television Sizes In Relation To PLBRC37602 Bracket 300mm x 300mm Standard Television Sizes In Relation To PLBRC37602 Bracket 400mm x 200mm Standard Television Sizes In Relation To PLBRC37602 Bracket 400mm x 300mm Standard Television Sizes In Relation To PLBRC37602 Bracket 400mm x 400mm Standard Television Sizes In Relation To PLBRC37602 Bracket 600mm x 400mm Standard Television Sizes In Relation To PLBRC37602 Bracket LCD brackets, flat panel displays, and other TV wall mounts that feature a steel construction, like the ones seen here, are heavy duty displays that support televisions of different size with ease. The LCD displays have a black powder coated finish that easily blends in with any surrounding. The heavy duty TV wall mounts are VESA compatible from 100mm x 100mm through 800mmx 400mm. VESA compatibility refers to a standard between manufacturers of both flat screen LCD televisions and plasma brackets to ensure the different components will install correctly. These flat panel displays, TV wall mounts hold a 37" - 65" television that weighs up to 176 lbs. Most televisions will fit on these bracket units without an issue. The TV wall mounts that include screws, washers, and spacers are able to attach most televisions. However, some LCD, plasma, & LED flat panel monitors may need specific screws available at any hardware store. These flat screen units, TV wall mounts for a 37" - 65" monitor have a thin profile, sticking out only 1-5/8". This flat panel LCD television mount is found in offices, restaurants, homes, and more. These TV wall mounts are an affordable way to display your monitor securely. Click here for installation instructions. Dimensions: Mounting Bracket: 35-1/2"w x 8-1/4"h x 1"d Mounting Arms (length): 19-3/4" Distance from Wall: 1-5/8" Television: 37" - 65", weighing less than 176 lbs. VESA: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm, 800mm x 200mm, & 800mm x 400mm Weight: 9 lbs. Minimize

These flat TV mounts have extending arms to accommodate a m ... Read more

These flat TV mounts have extending arms to accommodate a monitor between 26 and 65 inches. The wall mount brackets have a low profile design, measuring only 1 inch deep. The flat TV mounts are VESA compatible, fitting most brand names. Holds 110 pounds. 200mm x 200mm Standard Monitor Sizes In Relation To WBUNVSL586 Plasma Flat TV Mounts 300mm x 300mm Standard Monitor Sizes In Relation To WBUNVSL586 LCD Wall Holders 400mm x 200mm Standard Television Sizes In Relation To WBUNVSL586 Plasma Holders 400mm x 300mm Standard Television Sizes In Relation To WBUNVSL586 Flat TV Mounts 400mm x 400mm Standard Monitor Sizes In Relation To WBUNVSL586 LCD Mounting Displays 600mm x 400mm Standard Television Sizes In Relation To WBUNVSL586 Display These flat TV mounts are a perfect way to mount your plasma, LCD or LED monitor onto a wall. The brackets are made from durable steel to last for years of use. These flat TV mounts are VESA compatible from 200mm x 200mm through 800mm x 600mm. VESA refers to an agreed upon standard between manufacturers of televisions and mounting accessories. This is to ensure flat TV mounts and monitors will work together. Screws, spacers, and washers are included as accessories for attaching the mounting arms to a monitor. The flat TV mounts include the necessary hardware to install your screen onto most surfaces. Some wall types may require specific screws that are available at any local hardware store. The flat TV mounts hold a 26" to 65" screen, weighing less than 110 lbs. The black finish of the display easily can fit in with any setting. The plasma brackets, screen displays, and other flat TV mounts have arms with removable extenders included to hold various television sizes. These arms allow users to display their televisions in either landscape (horizontal) or portrait (vertical) orientation without having the arms extend past the sides of most screen monitors. The mounting displays also have (2) bars that prevent the arms from sliding off the mount. A hole on each bar fits a padlock to prevent theft, making this display ideal in a restaurant, bar, or even retail establishments to prevent theft. This thin plasma mount sticks out from the wall only 1"! Click here for installation instructions. Dimensions: Overall: 21"w x 5"h x 1"d Width Fully Extended: 33-1/2" Mounting Arm Length: 17" Mounting Arm Length (w/extenders): 24-5/8" Depth w/Mounting Arms: 1" TV Size: 26" - 65", weighing less than 110 lbs. VESA: 200 x 200, 300mm x 300mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm, 600mm x 400mm, & 800mm x 600mm. Weight: 9 lbs. Minimize