> TV Accessories > tv mount/store displays2go

This TV stand for flat screens is capable of displaying ver ... Read more

This TV stand for flat screens is capable of displaying vertical and horizontal TVs. The floor-standing fixture holds a monitor up to 50" in size that weighs less than 150 pounds. This TV stand for flat screens has an internal storage area for wires. 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket This mobile TV stand for flat screens can be used in a variety of indoor locations, including trade shows and retail stores. This LCD display tower can be assembled in 11 easy steps, and the bracket mounts by performing 4 simple tasks. This easy assembly helps to cut down on the amount of setup time significantly. This quality TV stand for flat screens measures 45"w x 76"h x 36"d. With the TV bracket installed, this unit weighs 73.5 lbs. The mounting brackets are VESA compatible and plasma monitors that measure up to 50" and weigh less than 150 lbs. can be mounted (limitations on the size of the monitor depend on usability of the shelf, orientation mounting selection, VESA size, stand height, and actual weight of the TV). Two sets of different sized horizontal bars are included, enabling users to select a set of bars that hold a TV in horizontal or vertical orientation and reduce or eliminate TV bracket visibility from the front. This TV stand for flat screens that can be used as a piece of furniture or entertainment center has a cast aluminum frame and comes with spacers, screws, and washers to attach an LCD monitor to the mounting arms. The included TV mounting hardware fits a wide range of monitors, but you may need to visit your local hardware store should your TV require special hardware. The mounting plate on this TV stand for flat screens does not raise/lower using an Allen wrench. This is accomplished with a ratcheting box wrench, which is included with the unit. The Hex wrench is used to install the (4) screws that hold the VESALG bracket. The vertical movement feature is hidden by a decorative snap-on cap and secured with lanyard to prevent loss. This LCD display rack, TV stand for flat screens that can be stored in a corner can support up to 50 lbs. of material on its shelf. The height adjustable and removable shelf makes this structure versatile for digital advertisements, lectures and seminars, presentations, medical procedures, or trade shows. This attractive unit can be situated strategically at the entrance of any venue or angled in the corner of a room to inform people of your message and make that space more appealing. This durable plastic shelf measures 22"d x 16-7/8"w and has (4) slots, which can be used to safely secure electronics and devices. This TV stand for flat screens that hides cords and cables, also known as a portable workstation, provides an organized workspace. Two back panels safely enclose any wires that need to be plugged into a wall outlet to power electronic devices used with this entertainment center. Wires are inserted from the top for TV or the middle for peripherals and exit from the middle or bottom as required. When all cables are contained inside the panel, there is less of chance of wires becoming tangled and knotted. Another feature of this TV stand for flat screens is the front locking wheels that prevent the structure from moving. Dual wheels with polyurethane tires allows for easier starting/rolling, is more durable than rubber and is quieter when operating. This furniture entertainment center unit is the best choice for any cost-effective mobile demonstration! Buy this TV stand for flat screens before 1pm EST for same day shipping options. Click here for assembly instructions. Click here for bracket installation instructions. Dimensions: Overall: 45"w x 76"h x 36"d Minimize

LCD TV stands combine static poster displays with dynamic d ... Read more

LCD TV stands combine static poster displays with dynamic digital presentations. These floor-standing fixtures have a 21.5" x 60" poster frame as well as a VESA bracket that holds 42" to 72" monitors. The LCD TV stands measure 73.5" tall. Monitor stands, plasma stands, and other LCD TV stands are perfect for retail store, office, trade show, and conference room use. These 50" LCD TV stands are designed to hold a 21-1/2" x 60" poster. A non-glare lens is included to keep your poster visible as well as protected. LCD TV stands come with a VESA LG bracket for holding a 42" to 72" TV, weighing up to 80 lbs. VESA brackets are designed with manufacturers to fit most televisions, and include hardware to mount your plasma or 50" LCD TV, though some may require specific screws you can purchase at any hardware store. This LED bracket is ideal for any brand television including but not limited to Samsung. This LCD TV stand can mount a 50" that will attract and captivate attention from passersby. This LED bracket is VESA LG compatible making it the best capable mount for any television even your Samsung. Mounting a 50" LED television to this LCD TV stand is often seen at tradeshows and events. This LED mount along with its graphical element makes this display attention-grabbing at any location. LCD TV stands have an adjustable bracket that allows you to display your television horizontally or vertically. This bracket also allows you to change the height a plasma or LCD television is displayed to provide the best view. These plasma stands, LCD TV stands are shipped unassembled to keep shipping costs lower, and are easily put together using simple tools in a few minutes. Made of aluminum with a satin silver finish, LCD TV stands blend in with any decor is quite durable for years of use. With (7) disc feet on the MDF base to keep it stable, these plasma stands, LCD TV monitor stands are ideal for use in heavily trafficked areas. Please Note : Graphic is not included with LCD TV stands. When designing your images, keep in mind actual graphic size is 21-1/2"w x 60"h, where 1/2" on each side is covered. Your graphics should be printed on regular poster paper, so as to ensure they will fit securely within the grooves. This will not be a problem for any printing service facility. Dimensions: Overall: 37-7/16"w x 73-1/2"h x 24"d Base Size: 37-7/16"w x 1"h x 24"d Poster Size: 21-1/2"w x 60"h Viewable Area: 20-1/2" x 60"h Television Size: 42" to 72", less than 80 Lbs. Weight: 46 lbs. Minimize

This swivel TV mount extends 26 inches from the wall. The a ... Read more

This swivel TV mount extends 26 inches from the wall. The articulating bracket pans and tilts back and forth. This swivel TV mount holds a flat-screen monitor between 37 and 55 inches. The wall-mounting bracket has a range larger than 180 degrees. 100mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket Articulating arm can be angled to position TV in multiple rooms, without removing from wall A swivel TV mount, like this articulating plasma bracket, is a valuable space-saving tool that can be used in commercial and residential locations! This support offers many unique features that most comparable corner models cannot provide! The plasma entertainment wall system, swivel TV mount features a long, extendable arm that expands outward to 26-1/16" from the wall! The average articulating distance for most brackets is around 15" and therefore, the exclusive range of motion for an LCD screen offered by this stand is substantial! Even though this bracket expands from a wall surface considerably, this swivel TV mount that will support a monitor weighing 88 lbs. does not compromise the dimensions of a television that can be mounted in any way! The variable arm is engineered from a meticulous, thorough design, which provides added stability, durability and resilience! When the mounted LCD monitor screen is not in use, this swivel TV mount can be positioned completely flat against a wall! This feature certainly prevents accidents and injuries that may be the result from colliding accidentally with an expensive piece of technology! This flat screen holder, swivel TV mount that can be situated near the corner of two rooms, is a great way to accommodate guests that may be seated in another area! By simply relocating, bending and adjusting the display, viewers can arrange the monitor according to preference! This plasma wall rack, swivel TV mount that is used in many different settings can also tilt -5 degrees - 15 degrees, all dependent on the position and desirable angle! As a result, many types of users operate this articulating corner support resourcefully on a daily basis, including airports, educational institutions, galleries, hospitals, libraries, museums, offices, restaurants, retail stores and tradeshows! This steel structure enables users to safely swivel the plasma television display 90 degrees back and forth, which gives this detailed and affordable electronics mount added value! Click here for assembly instructions. Dimensions: Bracket: 26-1/2"w x 16-15/16"h Distance from Wall: 1-3/4" - 26-1/16" (90 degrees fully extended) Tilt Range: -5 degrees - 15 degrees Television Size: 37" to 55", weighing less than 88 lbs. VESA Compatible: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm Weight: 16 lbs. Minimize

This multiple monitor mount displays 4 screens, each betwee ... Read more

This multiple monitor mount displays 4 screens, each between 10 and 24 inches. The tabletop bracket is 23.5 inches tall and rotates, swivels and pivots each monitor. The multiple monitor mount is height-adjustable. VESA compatible with 75x75 and 100x100. 75mm x 75mm Standard TV Sizes in Relation to VESALG Bracket 100mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket A TV swivel mount, like this plasma screen bracket, ships preassembled and can be mounted instantly! The innovative design and all-black finish blends seamlessly into any environment and can be positioned above a small DVD cabinet in order to save space! Unfortunately, most bracket configurations are limited to only one solid attribute today. However, this TV swivel mount can tilt -/+ 15 degrees and articulate side-to-side, a double feature that most others simply cannot offer! Adjustments are effortless and can be done within an instant in order to modify the display to any optimal viewing angle! This plasma LCD holster, TV swivel mount that is slim against a wall measures 1-3/4"d when situated flat on a partition! When extended outward to the maximum distance, the television panel bracket will measure 20-1/8" from the mounting surface! A flat LCD wall support, similar to this TV swivel mount that articulates, is a great investment for not only businesses but for home owners too! Any type of bracket that can tilt and be regulated at a given point in time is treasured by all users who then are able to pivot the arm in order to watch a show or presentation from another room! This mountable bracket, TV swivel mount that secures into a wall stud eliminates the need for a bulky entertainment cabinet credenza! As soon as a LCD television is properly in position in a room, the space instantly transforms into a custom home theater! Although this TV swivel mount fits a 37" flat panel screen maximum, the display can fit a range of monitors from 17"! The arm can be fine-tuned to any suitable position and can tilt a screen downward or upward depending on the positioning on a wall. Even if a new flat LCD monitor is purchased to replace an existing electronic, as long as the panel falls between the range limit of screens and weighs less than 66 lbs., this bracket can be moved, reused and functional even after the initial mounting! Click here for mounting instructions. Dimensions: Bracket: 9"w x 9"h Distance from Wall: 1-3/4" - 20-1/8" (fully extended) Television Size: 17" to 37", weighing less than 66 lbs. VESA Compatible: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm & 200mm x 200mm Weight: 8 lbs. Minimize

This swivel TV mount holds an LCD monitor between 32 and 60 ... Read more

This swivel TV mount holds an LCD monitor between 32 and 60 inches. The articulating bracket has a full range of motion, easily pivoting from left to right. The swivel TV mount also tilts up or down 15 degrees. VESA compatible! 99 pound capacity. 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket A swivel TV mount, like this LCD wall bracket, provides many exclusive features to all users that other models simply cannot offer! The bracket and arm have an all-black finish which complements any environment well! This plasma panel support, swivel TV mount that secures into a wall stud can be situated in close proximity to a corner in order to provide distant viewing to customers and guests within a retail store! When positioned higher up, the arm can be adjusted and the bracket can tilt to angle downward in order to angle the monitor accordingly! This flat screen wall configuration, swivel TV mount that can tilt is also integrated into residential settings for personal use! Conveniently, this plasma panel holster ships fully assembled and is ready to be installed directly out of the box! Although this is a swivel TV mount that holds a 60" flat panel screen, the minimum size monitor that can be mounted is a 32", weighing less than 99 lbs! As electronic companies continue to evolve, lighter displays are beginning to transpire now more than ever! This range of monitor sizes is considerable and realistic for most LCD screens available on the market today! This plasma holder, swivel TV mount for corner use secures flat against a wall and once installed properly, the arm manually adjusts effortlessly! Home owners appreciate this bracket as well and find creative places within homes to showcase a larger LCD plasma! When situated flush against a partition, this strong, low-profile swivel TV mount that has a movable arm measures 2" off the wall and can extend to 17-1/2"! The above features incorporated into system altogether combine to create an affordable, cost-effective arrangement for virtually any type of user! Click here for mounting instructions. Dimensions: Bracket: 27"w x 17"h Distance from Wall: 2" - 17-1/2" (fully extended) Television Size: 32" to 60", weighing less than 99 lbs. VESA Compatible: 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm Weight: 13.5 lbs. Minimize

This TV mount holds a flat-screen monitor between 23 and 60 ... Read more

This TV mount holds a flat-screen monitor between 23 and 60 inches. The low profile bracket has a tilting mechanism to adjust the angle of a displayed television. This black TV mount is VESA compatible to fit most monitor brands. Universal design! 200mm x 200mm Standard Television Sizes In Relation To WMB9400 LCD mounts 300mm x 300mm Standard Television Sizes In Relation To WMB9400 plasma bracket 400mm x 200mm Standard Television Sizes In Relation To WMB9400 TV mount 400mm x 300mm Standard Television Sizes In Relation To WMB9400 flat screen holder 400mm x 400mm Standard Television Sizes In Relation To WMB9400 plasma bracket 600mm x 400mm Standard Television Sizes In Relation To WMB9400 flat panel mount This TV mount has a universal design to hold most television sizes. The flat panel bracket is VESA compatible for 200mm x 200mm through 600mm x 600mm. The TV mount features an adjustable wall plate as well, allowing larger monitors to easily be placed on the unit. To change the length of the bracket, simply loosen the screws on the back of the plate and slide the plate until at desired width, and then retighten. This TV mount, like an articulating plasma stand, has extending brackets that allow different sizes of monitors to be installed with ease. The display arms remain hidden when used on smaller televisions, and then the extenders can be added if needed for larger monitors. The TV mount includes the necessary spacers, screws, and washers to attach most televisions to the mounting arms. Some monitors may require specific screws that can be purchased at any local hardware store. This LCD bracket, TV mount is ideal for users to place televisions in either landscape (horizontal) or portrait (vertical) format. All of the monitors available in the related products (to the right) can fit on this bracket in either format without an issue. This TV mount uses tilting arms that can be adjusted to angle down, up to 15 degrees. Angling your television will provide a better view when mounted higher up on a wall! Buy this TV mount before 1pm EST and it ships today! Click here for installation instructions. Dimensions: Wall plate (closed): 20-7/8"w x 8-3/8"h x 1"d Wall plate (open): 24-3/8"w x 8-3/8"h x 1"d Mounting Arm length: 18-3/4" Mounting Arm length (w/extenders): 24-3/4" Depth w/ mounting arms: 3-1/4" (not tilted) Television Weight: up to 132 lbs. VESA: 200mm x 200mm through 600mm x 600mm (including: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm, & 600mm x 600mm) Weight: 11 lbs. Weight: (w/extenders): 12 lbs. Minimize

This swivel TV mount holds a flat panel monitor between 17" ... Read more

This swivel TV mount holds a flat panel monitor between 17" and 37", which weighs up to 55 pounds. The wall-mounted bracket has an articulating arm and can extend out to 14.56" deep (flush is 1.25"d). The swivel TV mount rotates and tilts with ease. 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket This flat panel rack, swivel TV mount that can tilt and pivot, has an articulating arm which is designed to manually position a monitor to any optimal viewing angle! A plasma display screen can be angled 15 degrees up or down and adjusted 100 degrees left or right to situate the mounted flat screen to any desirable incline. This swivel TV mount that can rotate 360 degrees, is ideal for those who like to change the layout of the display from portrait to landscape orientation. This highlighted attribute allows the user to quickly and effortlessly adjust the direction of the flat screen without detaching and reinstalling the monitor accordingly. This articulating LCD holder, low profile swivel TV mount, sits 1.06" off any wall and can extend 14.17" outward! Two plastic wall plate covers are also included, which are fastened over the installation tracks to hide all screws and hardware. This swivel TV mount that is crafted from aluminum and steel, weighs 6lbs. and measures 19-5/8"w x 1-1/4"h x 8-3/4"d flat! This articulating flat panel holder also has a built in cable management system to keep all cords and wires organized, untangled and neat. A swivel TV mount, like this full motion plasma bracket that can tilt, is versatile and can be used in a variety of settings! Consumers who have purchased this LCD holder have creatively incorporated this stand into the creation of a home theater, retail space, office/conference room or any other location that requires the use of an ultra-slim, stationary LCD rack. This is a flat screen bracket, full motion swivel TV mount that can be positioned on a wall, in close proximity to a ceiling and used as a tool when communicating vital information to consumers or guests! Simply install this super slim flat panel rack into (2) 16" or 17.7" framework studs of any room to stabilize and secure this holder in place! This swivel TV mount is versatile and the most affordable choice for an articulating arm flat panel wall bracket! Click here for assembly instructions. Dimensions: Bracket: 19-5/8"w x 8-3/4"h Flush with Wall: 1-1/4" Fully Extended: 14-9/16" Television Size: 17" to 37", weighing less than 55 lbs. VESA Compatible: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm & 200mm x 200mm Weight: 6 lbs. Minimize

This TV mount and shelf is for wall mounting. The VESA-comp ... Read more

This TV mount and shelf is for wall mounting. The VESA-compatible bracket displays a flat-screen monitor between 10 and 32 inches. The black TV mount and shelf includes 16.5-inch-wide display shelf that is height-adjustable. Perfect for home use! 75mm x 75mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 100mm x 100mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 200mm x 100mm Standard Television Sizes In Relation To VMWS12SHCL Bracket 200mm x 200mm Standard Television Sizes In Relation To VMWS12SHCL Bracket This is a home theater wall stand, economical TV mount and shelf, that holds up to 22 lbs. of electronics on the glass counter. The flat panel bracket component fits any display up to 32" that weighs less than 66 lbs. and can be uniquely positioned out of the way, near a corner! This LCD monitor rack, flat panel TV mount and shelf, has a 16-1/2"w x 11-3/4"h glass ledge that is height adjustable. This feature provides more room for a larger LCD monitor screen display or taller components. This TV mount and shelf that can be used as part of a home theater system is essential for those that have minimal space, such as a tenant in a studio apartment. When properly mounted, the glass ledge measures 13-1/2" off the wall. Many customers feel that this unique feature is a major incentive to purchase this flat panel holder! This plasma screen wall bracket, TV mount and shelf that can be positioned in a corner, is ideal for creating a cost-effective, space-saving home theater arrangement. When incorporating this flat panel/dvd player holder combo unit into a family entertainment space, the initial design and layout process is easier, which can allow the user to become more creative! A TV mount and shelf, such as this LCD monitor bracket, is also used in retail spaces to promote new products or services! This LCD plasma screen rack is often used by stores that would like to show off the features of a new product line digitally! Users have the unique option of providing a literature holder on the glass top for handy go-to information as well! This strong stand can also be used in the lobby of a business or next to a corner of showroom! This is a TV mount and shelf that is made from tempered glass , is VESA compatible and can fit a range of monitors that measure between 10" - 32". All necessary hardware is included with this holder, the only tools that are needed for installation are those that are used to drill this bracket into a desired location! Order a corner TV mount and shelf now for your dvd player or collection of electronics! Click here for assembly instructions ! Dimensions: Overall: 16-1/2"w x 24"h x 13-1/2"d Shelf: 16-1/2"w x 11-3/4"h x 1/4"d (3) Silver Disks: 1-1/8"d TV Bracket: 8-1/2"w x 8-1/2"h Monitor Size: 10" - 32", weighing less than 66 lbs. VESA Compatible: 50x50, 75x75, 100x100, 200x100, 200x200 Wall Bracket: 2-13/16"w x 24"h x 1-5/16"d Maximum Weight Capacity: 22 lbs. Weight: 8 lbs. Materials Used: Aluminum column, steel and glass shelf, steel television bracket Minimize

This wall mount for TV is designed to display a 60-inch or ... Read more

This wall mount for TV is designed to display a 60-inch or larger flat-screen monitor vertically. The VESA-compatible bracket has 49-inch-long mounting arms for added support when displaying large TVs. This wall mount for TV sits flat against a wall. 400mm x 400mm Standard Television Sizes In Relation To PLBRC60V Bracket 600mm x 400mm Standard Television Sizes In Relation To PLBRC60V Bracket This wall mount for TV for vertical mounting holds a 60"+ monitor weighing up to 242 lbs. The plasma television screen display is designed to mount a monitor in portrait (vertical) orientation only, not landscape (horizontal). The heavy duty wall mount for TV, like an LCD bracket, is made of steel to provide a durable screen display that will last for many years. The steel has a powder coated black finish that easily blends in with any surroundings. This wall mount for TV that is made from steel is ideal for use in homes, businesses, hotels, offices, and even restaurants and bars. The black powder coated mounting brackets bring style to any location! These flat panel brackets are commonly used in both residential and commercial environments. This wall mount for TV features a flush design so that a monitor or television will not stick out from the wall. Buy this flat screen bracket for its slim profile and versatility! The wall mount for TV that holds a 60"+ flat panel TV is VESA compatible for 200mm x 200mm through 1200mm x 400mm. Each large mounting arm is 49" long, easily holding larger televisions in portrait orientation. This flat panel LCD bracket, wall mount for TV that is VESA compatible includes the necessary hardware to mount most televisions on the display. However, some plasma monitor screens may require specific screws that are available for purchase at any local hardware store! Purchase this wall mount for TV prior to 1pm EST to qualify for same day shipping options. Click here for installation instructions. Dimensions: Mounting Bracket: 23-5/8"w x 10-3/4"h x 1"d Mounting Arms (length): 49" Television: 60"+, weighing less than 242 lbs. VESA: 200mm x 200mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm, 600mm x 400mm, 800mm x 200mm, 800mm x 400mm, & 1200mm x 400mm Weight: 17-1/2 lbs. Minimize

Flat screen TV mounts stick out only 1.5" from a wall. The ... Read more

Flat screen TV mounts stick out only 1.5" from a wall. The included magnetic level makes sure your presentation is straight. These flat screen TV mounts hold a 26" to 55" monitor. The brackets tilt to combat glare and to accommodate any location. 100mm x 100mm Standard TV Sizes In Relation To MNTT202 Bracket 200mm x 100mm Standard Television Sizes In Relation To MNT T202 Bracket 200mm x 200mm Standard Television Sizes In Relation To MNTT202Bracket 300mm x 300mm Standard Television Sizes In Relation To MNTT202 Bracket 400mm x 200mm Standard TV Sizes In Relation To MNTT202 Bracket 400mm x 300mm Standard Television Sizes In Relation To MNTT202 Bracket 400mm x 400mm Standard Television Sizes In Relation To MNTT202 Bracket 600mm x 400mm Standard Television Sizes In Relation To MNTT202 Bracket Flat screen TV mounts have an ultra slim profile that sticks out only 1-1/2" from a wall without the monitor. These plasma brackets, flat screen TV mounts offer a sleek way to mount your plasma or LCD television onto a wall. These flat screen TV mounts can hold a 26" to 55" plasma or LCD television that weighs up to 99 lbs. We include the necessary screws to attach most televisions to this mount, though some may need specific screws you can purchase at any local hardware store. Flat screen TV mounts are VESA compatible for 100mm x 100mm to 600mm x 400mm. VESA standards are agreed upon between manufacturers of mounts and brands so that mounting holes on televisions are the same across brands. Plasma TV mounts, LCD brackets, and other flat screen TV mounts allow you to tilt your television down up to 12 degrees. Titling your plasma or LCD television allows you to provide a better viewing angle. Flat screen TV mounts also include a locking mechanism on the bottom of each arm that helps to hold the mounting arms onto the bracket. An included level for this flat panel mount helps with installation onto wood studs and solid concrete walls. If you have any questions regarding installation on your wall type, please consult a professional. Buy flat screen TV mounts today to hang a television on your wall and open up more floor space! Dimensions: TV Bracket: 26-3/8"w x 8-3/4"h Wall Mounting Plate: 18-1/8"w x 7-5/8"h Television Size: 26" to 55", weighing up to 99 lbs. VESA: 100mm x 100mm - 600mm x 400mm Weight: 4 lbs. Minimize

This LCD stand is double-sided to display 2 flat-screen mon ... Read more

This LCD stand is double-sided to display 2 flat-screen monitors up to 60 inches. The rotating brackets are height-adjustable, with the maximum height measuring 66 inches from the floor. This black LCD stand is VESA compatible. Locking casters included! 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket An LCD stand, like this multimedia floor display, accommodates two plasma display monitors simultaneously! Even though most racks found today have only (1) or (2) TV brackets on one side only, this exceptional mount has back-to-back supports that can be adjusted autonomously! This monitor cart, LCD stand that has rotating brackets can manually adjust to present pertinent information in portrait or landscape layout effortlessly! Doctors and other medical-related professions use this convenient support as a part of a mobile desk space as well when traveling around facilities! This movable monitor rack, LCD stand that is a mobile floor cart has rolling casters which lock to hold the cart in position during use! This valuable feature was integrated into the design and configuration of this system in order to help protect the electronics on display and prevent dangerous accidents from occurring! This media cart, LCD stand that is sturdy measures 67-3/4" tall and can mount two 60" TV panels weighing less than 88 lbs. each! Users can uniquely provide product, service or company presentations on each side in order to gain the greatest amount of visibility in a retail space, office, showroom or other enclosed space! Although this LCD stand holds dual monitors, both mounting devices do not need to be used concurrently in order for this assembly to be fully operational! When double-sided presentations are not required, the additional panel can be removed and stored safely in a backroom on a desk. Furthermore, this innovative LCD stand can display media from both sides and if used on a daily basis, should work to an enterprise's advantage optimistically! With much anticipation, exposure and responsiveness to the brand should increase considerably over time! Note: Some TVs may require specific screws, which can be purchased at your local hardware store. Click here for assembly instructions. Dimensions: Overall: 32-3/4"w x 67-3/4"h x 31-3/4"d Base: 32-3/4"w x & 6-1/2"h x 31-3/4"d Maximum Height (to center of bracket): 66" Bracket: 23-13/16"w x 17-5/16"h Television Size: Most TVs up to 60", weighing less than 88 lbs. (per screen) Casters: 3" diameter VESA Compatible: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm & 600mm x 400mm Weight: 49 lbs. Minimize

This TV wall mount has a low profile design sticking out on ... Read more

This TV wall mount has a low profile design sticking out only 1 inch from the wall. The bracket is designed to hold a flat-screen monitor between 42 and 55 inches. This low profile TV wall mount holds up to 176 pounds. VESA compatible to fit any brand. 200mm x 200mm Standard Television Sizes In Relation To PLBRC32601 Bracket 300mm x 300mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 200mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 300mm Standard Television Sizes In Relation To PLBRC32601 Bracket 400mm x 400mm Standard Television Sizes In Relation To PLBRC32601 Bracket 600mm x 400mm Standard Television Sizes In Relation To PLBRC32601 Bracket This TV wall mount that features a steel construction has a black powder coated finish. The durable flat panel plasma display is very strong and will last for years to come. The heavy duty TV wall mount is VESA compatible from 100mm x 100mm to 600mm by 400mm. VESA compatibility refers to the agreement between manufacturers of both flat screen monitors and brackets to ensure televisions and brackets will work with each other. The TV wall mount that includes screws has the necessary hardware for installation onto most surfaces. However, some screens may require specific screws available at any local hardware store. This TV wall mount for a 42" to 55" television, like a flat panel bracket, holds a monitor weighing up to 176 lbs. Nearly any plasma, LCD, or LED screen is able to be placed on this display! This flat panel plasma display, TV wall mount that features a black finish, adds style to any environment. The arms of this display have screws to secure them onto the mounting bracket. The TV wall mount features a low-profile, sticking out from the wall only 1-5/8". This heavy duty plasma unit is perfect for use in offices, hotels, schools, bars, and even homes. Order this quality TV wall mount today! Click here for installation instructions. Dimensions: Mounting Bracket: 31-1/2"w x 8-3/8"h x 1"d Mounting Arms (length): 19-3/4" Distance from Wall: 1-5/8" Television: 42" - 55", weighing less than 176 lbs. VESA: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, & 600mm x 400mm Weight: 8 lbs. Minimize

These flat TV stands holds a 42 to 72 inch flat screen tele ... Read more

These flat TV stands holds a 42 to 72 inch flat screen television that is less than 80 pounds. The floor-standing fixtures include tilting bracket to adjust the angle of a displayed monitor. These flat TV stands are VESA-compatible with most televisions. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Stand Tilts with Ease! Flat TV stands are perfect for use at trade shows, retail stores, and offices. These flat TV stands, also known as an LCD stand and a plasma TV stand, include a VESA LG bracket for mounting 42" to 72" plasma or LCD televisions that weigh up to 80 lbs. We include the necessary hardware to mount most televisions to the bracket, however some may need specific screws you can buy at a local hardware store. These plasma stands, flat TV stands have a silver finish to easily blend in with any surrounding. This LCD mount is manufactured from MDF and aluminum to withstand high traffic areas as well as managing to hold your Samsung or any other brand that is compatible. These flat TV stands can mount a 70" Samsung television that will increase your customer support at a tradeshow or event. This LCD bracket is VESA LG compatible which includes necessary hardware however you may need to purchase additional hardware to mount your television. This LCD mount will go with any television between 42" and 72" as long as the weight is below 80 lbs. Also include is a tilt mechanism to allow for better viewing angles. These LCD stands, flat TV stands come with (4) plastic strips that allow you to hide wires along the back of the pole to help keep them out of view. The flat TV stands feature a large, rounded base that provides the display with stability, perfect for use in areas with heavy traffic. These flat TV stands are shipped unassembled to keep shipping costs lower, and can easily be put together in a few minutes with only simple tools required. The rounded base of this flat screen stand is made from MDF, while the extrusion that holds up your television is made from aluminum. Dimensions: Overall: 37-7/16"w x73"h x 24"d Base: 37-7/16"w x 1"h x 24"d Television size: 42" to 72", weighing up to 80 lbs. VESA: 200mm x 200mm to 600mm x 400mm Weight: 39 lbs. Minimize

This TV wall mount displays a flat-screen monitor between 3 ... Read more

This TV wall mount displays a flat-screen monitor between 32 and 60 inches, that weighs less than 88 pounds. The VESA-compatible bracket should fit most brand names. This low profile TV wall mount measures only 1 inch from a wall. Easy setup! 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket This is a plasma flat screen rack, space saving TV wall mount, that is VESA compatible and can fit any configuration up to 600mm x 400mm, including 300mm x 300mm! A flat panel television can be situated up high, closer to the ceiling for informative product displays in retail stores! Businesses are able to then utilize the space underneath for accessories or information stands. A TV wall mount, like this low profile plasma monitor rack, can be used in a house for digital entertainment or in a business for demonstration purposes! In a professional setting, appropriate monitors can be positioned together in an even row, producing a uniformed line of flat screen television brackets that can be used to present pertinent facts that must be communicated. Image slideshows or quick installation videos of any promoted group of accessories can be displayed on these plasma stands as well! This LCD flat panel holder, ultra-slim TV wall mount, can accommodate any 32" to 60" television that weighs less than 88lbs. This flat screen plasma holder can be displayed vertically or horizontally, where the uppermost set of mounting holes on the back of the monitor are used for secure installation! This TV wall mount that has 3 simple installation steps includes easy tolerance mounting disks. These added pieces of hardware enable the installer to line up the drilled hole inside the mounting slot by rotating accordingly, even if the initial puncture is a bit off center. This stationary LCD bracket, TV wall mount that comes with a bubble level, has simple installation steps that can be followed for quick setup as well! A manual pull is attached to each of these flat screen brackets that are used when detaching the mountable arm. When this step is completed, the installer can install the white bracket at the desired location, fasten the isolated black piece to the back of the display, position the two pieces together again and adhere the circular hanging device to any space on the back of the flat panel monitor. This TV wall mount that is crafted from steel has a white, neutral finish which is practical for residential and commercial use! Customers resourcefully integrate this affordable and attractive LCD television holder in practically any space that needs a monitor to digitally display accessories! There are hundreds of articulating brackets that tilt, most of which have easy installation steps so be sure to browse the entire selection to find the best fit for you! Click here for assembly instructions. Dimensions: Overall (w/o mounting plate): 22"w x 7-1/2"h Overall (w/ mounting plate): 25-1/2"w x 7-1/2"h Distance from Wall: 1" Television Size: 32" to 60", weighing less than 88 lbs. VESA Compatible: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm & 600mm x 400mm Weight: 5.5 lbs. Minimize

These TV wall mounts can hold flat panel monitors ranging i ... Read more

These TV wall mounts can hold flat panel monitors ranging in size from 36" to 55". The VESA compatible brackets feature a tilting design to adjust the angle of your displayed televisions. These TV wall mounts include a built-in level for easy setup. 200mm x 200mm Standard Television Sizes In Relation To WTVM3655M1 Bracket 300mm x 300mm Standard Television Sizes In Relation To WTVM3655M1 Bracket 400mm x 200mm Standard Television Sizes In Relation To WTVM3655M1 Bracket 400mm x 300mm Standard Television Sizes In Relation To WTVM3655M1 Bracket 400mm x 400mm Standard Television Sizes In Relation To WTVM3655M1 Bracket 600mm x 400mm Standard Television Sizes In Relation To WTVM3655M1 Bracket Product Specifications TV Size Range: 36" - 55". Weight Capacity: 176 lbs. Distance From Wall: 3". VESA Compatible: 75x75; 100x100; 200x200; 200x100; 300x300; 400x200; 400x300; 400x400; 600x400. Downward Tilt: 15 degrees. Color: Black w/ chrome accents. TV wall mounts can be used in your home or office to display your plasma or LCD television without taking up floor space. These plasma wall mounts, TV wall mounts can hold a 36" to 55" television that weighs up to 176 lbs. We include screws, spacers, and washers to attach your television to this mount, however some TVs may require specific screws you can buy at any local hardware store. TV wall mounts also include a level that attaches to the pole to ensure when you mount it on the wall it is flat. Plasma wall mounts, LCD mounts, and other TV wall mounts allow you to angle a television down up to 20 degrees. This allows you to provide a better view when the TV is up higher on the wall than where your couch or seats are located. These LCD mounts, TV wall mounts includes a bolt on the back of the television mounting brackets to help secure the television to the mount once in place. TV wall mounts stick out about 3" once mounted, and the sliding brackets allow you to easily position them along the studs for attaching to your wall. These LCD wall brackets, TV wall mounts are a low cost way to hang your flat screen television up securely for a better viewing experience. Dimensions: Bracket: 32"w x 7-1/2"h x 3"d Weight: 9 lbs. Minimize

This swivel TV bracket holds a flat screen monitor between ... Read more

This swivel TV bracket holds a flat screen monitor between 23 and 42 inches. The articulating wall mount holds up to 66 pounds. This swivel TV bracket extends out to 10.5". The rotating mount instantly changes a monitor from vertical to horizontal. 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket This swivel TV bracket that mounts any flat panel monitor measuring up to 42" provides many unique features to any user! A versatile plasma screen holder, such as the deluxe wall stand revealed on this page, is a quality purchase and will surely provide great value to those who are in the market to purchase a durable, compact stand that easily mounts to any level wall space! This LCD holder with articulating arm, low profile swivel TV bracket, can pivot a flat panel television 45 degrees to the left or right. This feature enables any user to reposition the display to any desirable angle or incline with ease. This swivel TV bracket that can tilt 15 degrees up or down can be used commercially or residentially! Customers who have purchased this flat panel display holder have creatively incorporated the design into businesses, homes, medical facilities, offices, theaters, tradeshow booth configurations and other venues that can benefit from the meticulous design and quality construction of this LCD rack. A swivel TV bracket, like this plasma screen holder, can even be positioned in consumer purchasing establishments higher up on a wall and closer to a ceiling for out of reach digital product displays! This attractive stand provides many uses and is most appreciated by those that enjoy the convenience of a stationary flat panel holder than can tilt, rotate and accommodate a number of monitor screen sizes! This swivel TV bracket that is made from cast aluminum is engineered to support a television display up to 66lbs. By mounting this LCD holder properly and abiding by the maximum weight capacity set forth, users can be assured that this monitor stand is secure and will not fall from the fastened location. This is a plasma screen holder, swivel TV bracket, that mounts into a 16" or 17.7" wall stud. All necessary screws and bolts are included; the only tools that are required are those that are used for installation purposes, most of which can be purchased at any local hardware store! This quality flat panel wall unit, cast aluminum swivel TV bracket, includes plastic caps that conceal all hardware used to screw this model into a wall. This added detail provides the final finishing touches to this plasma rack, which makes this wall mounting stand polished and professional! Click here for assembly instructions. Dimensions: Bracket: 19-5/8"w x 8-3/4"h Flush with Wall: 1-1/2"d Fully Extended: 10-1/2"d Television Size: 23" to 42", weighing less than 66 lbs. VESA Compatible: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 300mm x 300mm, 400mm x 200mm & 400mm x 400mm Weight: 8.5 lbs. Minimize

This TV wall mount supports a flat-screen monitor between 3 ... Read more

This TV wall mount supports a flat-screen monitor between 32 and 60 inches, weighing up to 110 pounds. The low-profile bracket rotates 360 degrees! This adjustable TV wall mount is VESA compatible with a variety of sizes. Easy installation! 200mm x 100mm Standard TV Sizes in Relation to VESALG Bracket 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket Easily Rotates Without Removing from Wall A TV wall mount, like this quality steel flat panel bracket, is a great way to save space in any room! The latest versions of LCD television sets often times include a large base that is intended for entertainment credenza positioning. Even though this arrangement can be useful in certain locations, the unique low-profile design of this mounting rack provides additional room within a given area for other types of furniture! As LCD monitors become increasingly larger, an affordable, durable support is an ideal investment for all users! In the meantime, as technology continues to evolve, it can be harder for consumers to select the right bracket for a display. While this TV wall mount features an adjustable bracket, the VESA compatibility attribute integrated enables users to fit a screen up to 600mm x 400mm. The screen can also manually swivel 360 degrees, a logical feature for businesses that provide various presentations to audiences daily! This heavy-duty plasma bracket, TV wall mount that supports 110 lbs., can be used resourcefully in commercial and residential settings! Although television displays today are designed larger, the electronic components integrated within are actually becoming lighter, which makes hanging a larger screen easier and safer! Likewise, this TV wall mount accommodates a 60" screen, weighing less than the constraints, without any issue! Customers who have purchased this stand resourcefully position electronic devices along any divider so as to create a prime, optimal viewing personal theater! This flat panel holder, TV wall mount that is easy to install features a circular mounting bracket which screws into any building framework stud. A television can be displayed in portrait or landscape orientation by simply adjusting the attached system vertically or horizontally! Please refer to the additional images on this page for a straightforward visual of how this bracket repositions from landscape to portrait orientation! This detailed plasma support, TV wall mount that includes a safety locking mechanism helps to prevent potential theft of an expensive LCD screen! The security element incorporated into each bracket is valued by all types of users, including home owners! Secured devices reduce the likelihood for theft significantly and thus, this bracket can be ideally used in any applicable location! Click here for assembly instructions. Dimensions: Bracket: 23-13/16"w x 17-5/16"h Distance from Wall: 50mm Television Size: 32" - 60", weighing less than 110 lbs. VESA Compatible: 200mm x 100mm, 200mm x 200mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm Weight: 9 lbs. Minimize

This swivel wall mount for TV holds a flat-screen monitor b ... Read more

This swivel wall mount for TV holds a flat-screen monitor between 26 and 47 inches. The articulating bracket pivots, tilts and rotates. This swivel wall mount for TV is VESA compatible to fit most brands. Full range of motion for perfect positioning. 300mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket A swivel wall mount for TV, like this articulating arm bracket, is a cost-effective, reasonable purchase for any type of consumer! This full motion support moves side-to-side and tilts +/-15 degrees! This quality LCD holder, swivel wall mount for TV that features a movable arm integrates other great features as well! The all-black finish blends into any applicable setting well and wall cap covers hide screws and dress up the plasma display! This low-profile LCD bracket, swivel wall mount for TV that is crafted from aluminum ships preassembled and once out of the packaging, weighs only 9.5 lbs! When fastened to a wall, the arm is able to manually move in order to reposition the screen accordingly! This feature is most valued by businesses and home owners that need to adjust the display every so often! Viewing shows or presentations in other rooms is convenient and adjustments are straightforward, simple and effortless! Even though this swivel wall mount for TV has full motion range, users can initially adjust the display to an optimal viewing angle and never have to rotate the screen again! Today, mounting configurations vary between styles, brands and mountable television sizes. Conversely, this model meets VESA compatible standards and can accommodate a wide range of monitors! This slim design LCD support system, swivel wall mount for TV can secure a 47" plasma that weighs less than 66 lbs! As technology continues to evolve, the weight of plasma screens continues to decrease. Thoughtfully, the design of this LCD bracket takes this factor into consideration and can provide accommodation for medium sized displays! The above characteristics and meticulous attributes integrated into this system make this swivel wall mount for TV that has an adjustable bracket an idealistic option for anyone! Click here for mounting instructions. Dimensions: Bracket: 19"w x 17"h Distance from Wall: 1-3/4" - 20-1/8" (fully extended) Television Size: 26" to 47", weighing less than 66 lbs. VESA Compatible: 300mm x 300mm, 400mm x 200mm, 400mm x 400mm Weight: 9.5 lbs. Minimize

This locking TV wall mount has a low-profile design. The mo ... Read more

This locking TV wall mount has a low-profile design. The mounting bracket is VESA compatible to fit most brands. This locking TV wall mount holds a vertically-mounted television between 37 and 60 inches, weighing less than 165 pounds. Includes lock. 200mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 200mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 300mm Standard TV Sizes in Relation to VESALG Bracket 400mm x 400mm Standard TV Sizes in Relation to VESALG Bracket 600mm x 400mm Standard TV Sizes in Relation to VESALG Bracket A locking TV wall mount, like this sturdy LCD bracket is an ideal investment for any type of business! This 17-3/4"w x 24-3/4"h flat panel holder is rather large and can support a screen measuring up to 60", weighing less than 165 lbs. This plasma support, locking TV wall mount that measures 1-5/16" off a wall can be used in virtually any indoor environment to convey a message to pedestrians passing through. Any large type of LCD screen with applicable graphics, information and sound can be used to attract visitors to the multimedia display, heighten awareness and ultimately encourage prospective consumers to investigate the product, service, company or event further! A locking TV wall mount that is easy to install is hard to find and this particular support can be installed in less than 10 minutes by following 3 steps! In a world where time is money, this time-saving trait is valued by all! This slim panel system, locking TV wall mount for digital advertising is fixed to a wall and does not tilt. When a large, expensive flat screen is properly fastened to the bracket, the inflexible, rigid support does not move! Today, many digital signage bracket supports will often tilt, do not lock and only position a small plasma television in landscape orientation. These three issues were all considered when designing this meticulous bracket. Numerous mounting devices tilt and in due course, this attribute can pose an issue when guests are able to manually adjust the monitor, which can result in unfortunate breakages! Furthermore, this locking TV wall mount has a lock included which prohibits theft and fastens the screen securely to the bracket! At present, advertising is everywhere and people often times overlook traditional advertisements subconsciously. This plasma screen holster will lock a 60" panel vertically only. Although this may seem like a limitation, this feature will actually draw attention to the advertised item and convey a message in a practical manner! The above design elements are most appreciated by businesses that position this affordable, cost-effective media panel everyday in public areas like airports, banks, casinos, indoor malls, museums and many other appropriate settings! This LCD panel holder, locking TV wall mount that secures a flat screen vertically presents a unique mounting system that is visually appealing, safe and easy on the wallet! Click here for assembly instructions. Dimensions: Overall: 17-3/4"w x 24-3/4"h x 1-5/16"d Mounting Arms: 1-1/2"w x 24-3/4"h Distance from Wall: 1-5/16" Television Size: Up to 60", weighing less than 155 lbs. VESA Compatible: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm, 600mm x 400mm Weight: 8 lbs. Minimize

These flat TV mounts have extending arms to accommodate a m ... Read more

These flat TV mounts have extending arms to accommodate a monitor between 26 and 65 inches. The wall mount brackets have a low profile design, measuring only 1 inch deep. The flat TV mounts are VESA compatible, fitting most brand names. Holds 110 pounds. 200mm x 200mm Standard Monitor Sizes In Relation To WBUNVSL586 Plasma Flat TV Mounts 300mm x 300mm Standard Monitor Sizes In Relation To WBUNVSL586 LCD Wall Holders 400mm x 200mm Standard Television Sizes In Relation To WBUNVSL586 Plasma Holders 400mm x 300mm Standard Television Sizes In Relation To WBUNVSL586 Flat TV Mounts 400mm x 400mm Standard Monitor Sizes In Relation To WBUNVSL586 LCD Mounting Displays 600mm x 400mm Standard Television Sizes In Relation To WBUNVSL586 Display These flat TV mounts are a perfect way to mount your plasma, LCD or LED monitor onto a wall. The brackets are made from durable steel to last for years of use. These flat TV mounts are VESA compatible from 200mm x 200mm through 800mm x 600mm. VESA refers to an agreed upon standard between manufacturers of televisions and mounting accessories. This is to ensure flat TV mounts and monitors will work together. Screws, spacers, and washers are included as accessories for attaching the mounting arms to a monitor. The flat TV mounts include the necessary hardware to install your screen onto most surfaces. Some wall types may require specific screws that are available at any local hardware store. The flat TV mounts hold a 26" to 65" screen, weighing less than 110 lbs. The black finish of the display easily can fit in with any setting. The plasma brackets, screen displays, and other flat TV mounts have arms with removable extenders included to hold various television sizes. These arms allow users to display their televisions in either landscape (horizontal) or portrait (vertical) orientation without having the arms extend past the sides of most screen monitors. The mounting displays also have (2) bars that prevent the arms from sliding off the mount. A hole on each bar fits a padlock to prevent theft, making this display ideal in a restaurant, bar, or even retail establishments to prevent theft. This thin plasma mount sticks out from the wall only 1"! Click here for installation instructions. Dimensions: Overall: 21"w x 5"h x 1"d Width Fully Extended: 33-1/2" Mounting Arm Length: 17" Mounting Arm Length (w/extenders): 24-5/8" Depth w/Mounting Arms: 1" TV Size: 26" - 65", weighing less than 110 lbs. VESA: 200 x 200, 300mm x 300mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm, 600mm x 400mm, & 800mm x 600mm. Weight: 9 lbs. Minimize

These wall mounts have an ultra thin design to attach telev ... Read more

These wall mounts have an ultra thin design to attach televisions to a wall with ease. The VESA compatible brackets fit most televisions ranging in size from 23" to 42". The wall mounts include a level to make sure your presentation looks perfect. 100mm x 100mm Standard TV Sizes In Relation To MNTT201 Bracket 200mm x 100mm Standard Television Sizes In Relation To MNTT201 Bracket 200mm x 200mm Standard Television Sizes In Relation To MNTF201C Bracket 300mm x 300mm Standard Television Sizes In Relation To MNTT201 Bracket 400mm x 200mm Standard Television Sizes In Relation To MNTT201 Bracket 400mm x 300mm Standard Television Sizes In Relation To MNTT201 Bracket 400mm x 400mm Standard Television Sizes In Relation To MNTT201 Bracket A TV wall mount features an ultra thin design that keeps your television closely mounted to the wall. This wall bracket, TV wall mount sticks out only 1-1/2" (without monitor) from the wall, making it perfect for those wishing for a low profile display. This TV wall mount is VESA compatible, and fits sizes ranging from 100mm x 100mm to 400mm x 400mm. This TV wall mount can hold a 23" to 46" plasma or LCD television that weighs up to 77 lbs. We include the necessary hardware to attach most televisions to the mount, though some may require specific screws you can buy from any manufacturer. A TV wall mount, like a plasma wall bracket and an LCD mount, has tilting arms that allow you to angle your television down up to 12 degrees. By angling your television down, you can provide the best view when mounted up on a wall. This TV wall mount also includes a locking mechanism on the bottom of each mounting arm that has a ribbon to easily attach to mount. A TV wall mount includes the hardware to install this bracket into wood studs or a solid concrete wall. If you have any questions regarding your wall type and installation, please consult a professional. Buy a TV wall mount today for a quality bracket that will allow you to display your television in style! Dimensions: TV Bracket: 18-1/2"w x 8-3/4"h Wall Mounting Plate: 18-1/8"w x 7-5/8"h Television Size: 23" to 42", weighing up to 77 lbs. VESA: 100mm x 100mm - 400mm x 400mm Weight: 3-1/2 lbs. Minimize

These TV brackets hold a television ranging in size from 23 ... Read more

These TV brackets hold a television ranging in size from 23" to 42". The adjustable wall mounts swivel and rotate a monitor with ease. These TV brackets are VESA compatible with 200x200, 300x300, 400x200 and 400x400. Extending arms are easy to adjust. 200mm x 200mm Standard Television Sizes In Relation To 4AR2342BK1 Brackets 300mm x 300mm Standard Television Sizes In Relation To 4AR2342BK1 Bracket 400mm x 200mm Standard Television Sizes In Relation To 4AR2342BK1 Brackets 400mm x 300mm Standard Television Sizes In Relation To 4AR2342BK1 Brackets 400mm x 400mm Standard Television Sizes In Relation To 4AR2342BK1 Bracket These adjustable TV brackets are perfect for flat plasma or LED televisions. The displays elevate a monitor up to a comfortable viewing angle. These TV brackets that have two double-jointed articulating arms, also known as LCD mounts, are ideal for use in homes, office buildings, hotels, banks, restaurants and more. The flat screen stands are heavy-duty, weighing in at 24 lbs.! These black TV brackets offer many adjustment options, all without the need of any additional tools! The mounts tilt, swivel, pan side-to-side and pull away from a wall. These flat panel stands, TV brackets that swivel hold a wide range of plasma or LCD TVs. This mount has two removable arms that affix to a monitor ranging in size from 23" to 42" and weighing less than 110 lbs. The bracket tilts 15 degrees up or down. The unit can swivel side-to-side 110 degrees. A cardboard template is included with purchase. This allows customers to easily figure out where the included screws need to be inserted, without having to lift up the entire display. An integrated cord management system allows wires to be fed down and away from the displayed LCD or plasma TVs, creating a neat appearance. Assembly of this mount is simple by first affixing (with included plastic covers) to the wall, then attaching the VESA-compatible mounting arms to the television, hanging this on the bracket and securing the mounting arm locks. All necessary hardware is included, although some televisions may require specific screws that can be found at a local hardware store. Click here for installation instructions. Dimensions: Mounting Plate: 6"w x 16-1/2"h x 1-1/4"d Mounting Bracket: 18-5/8"w x 10"h Mounting Arms (length): 17-1/2" Monitor Size: 23" - 42", weighing less than 110 lbs. VESA: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm Weight: 24 lbs. Minimize

This TV stand is equipped with a 200x100 VESA compatible br ... Read more

This TV stand is equipped with a 200x100 VESA compatible bracket for displaying a 23" to 30" flat screen television. The tilt adjusts your monitor to the best viewing angle possible. This TV stand includes locking wheels and strips to conceal cables. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Stand Tilts with Ease! These TV stands, also called an LCD stand or a plasma stand, are shipped with a 200 x 100 VESA mounting bracket , capable of holding a television from 23" to 30" that weighs less than 50 Lbs. VESA brackets are a standard mounting bracket that fit most televisions. We include the necessary hardware to mount most televisions on the bracket, however, certain televisions will need other screws that you can get at any local hardware store. These TV stands have a tilt mount for angling your flat television screen to ensure the best possible viewing for passersby. Trade shows, retail stores, and malls will all find these TV stands to be a great marketing tool. Flat screen displays, TV stands are a great eye-grabbing alternative to traditional poster stands. This LCD floor mount, television bracket is the top seller units suited for your Panasonic. These TV stands can mount a 23" LCD for optimal viewing of your displayed images, video or live cable. This LCD mount is VESA compatible making it ideal for Panasonic televisions. Mounting a 23" Panasonic TV to this stand will captivate the attention of passersby and draw them into your display. This LCD television bracket can be displayed in any location and will appeal to current and future customers. These TV stands, like a plasma stand and an LCD screen stand, use a hollow pillar to hold up your television. You can place the wires for the TV through this pillar, hiding them from passersby using (4) plastic strips, and keeping the upscale look of the display intact. This TV stands feature a wide base, to help provide stability for your display. These plasma stands, TV stands are made from brushed aluminum with a satin silver finish. Durable aluminum holds up well in high traffic locations, making it a perfect TV stand for a busy marketplace or high volume trade show. These flat screen stands are the perfect TV stands to show your customers products or valuable business information in an exciting way. Dimensions: Overall: 24"w x 50-11/16"h x 16-1/2"d Base Size: 24"w x 1-5/16"h x 16-1/2"d Television Size: 23" to 30", less than 50 Lbs. VESA: 200mm x 100mm Weight: 33 lbs. Click Here for Assembly Instructions. Minimize

These TV stands holds a 31 to 42 inch flat screen monitor t ... Read more

These TV stands holds a 31 to 42 inch flat screen monitor that weighs less than 70 lbs. Optional wheels give users the ability to reposition the fixture throughout a room. These TV stands are compatible with 200x200 VESA standards. Tilt bracket included. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. TV stands, like LCD stands or plasma stands, are perfect advertising tools for malls, retail stores, and trade shows. These TV stands come with a 200 x 200 VESA bracket . Fitting most brands of televisions, this VESA bracket is a standard mount that can securely hold a 31" to 42" screen that weighs less than 70 Lbs. We include the necessary hardware to mount most televisions on the bracket. Certain televisions will need other screws that you can get at any local hardware store. These TV stands feature a hollow pillar to hold up the screen. This hollow pillar keeps wires out of view with (4) plastic strips, keeping your display free from mess. Screen stands, TV stands are sure to grab the attention of passersby, effectively promoting your business to potential customers. Stand Tilts with Ease! These TV stands, also known as LCD stands and screen stands, are made from rust proof aluminum. Great for high traffic areas, this aluminum has a satin silver finish to coordinate beautifully with a variety of decors. These monitor display stands, TV stands also come with a tilting bracket, giving customers a better view of the screen. The TV stands have a wide base to offer great stability to the display. These plasma stands are the perfect TV stands to advertise in an exciting manner that is sure to earn you new customers! Dimensions: Overall: 30"w x 74-11/16"h x 16-1/2"d Base Size: 30"w x 1-5/16"h x 16-1/2"d Television Size: 31" to 42", less than 70 Lbs. VESA: 200mm x 200mm Weight: 44 lbs. Click Here for Assembly Instructions. Minimize

This TV wall mount has an articulating arm that rotates, ti ... Read more

This TV wall mount has an articulating arm that rotates, tilts and swivels. This black television bracket holds a flat-screen monitor between 10 and 32 inches in size. The articulating TV wall mount is VESA compatible with 50x50, 100x100 and 200x200. 100mm x 100mm Standard Television Sizes In Relation To W1AM1032M3 Bracket Product Specifications TV Size Range: 10" - 32". Weight Capacity: 55 lbs. Distance From Wall: 3" - 8-1/2" (fully extended). VESA Compatible: 50x50; 100x100, 200x200. Downward Tilt: 20 degrees. Color: Black. This TV wall mount can hold a 10" to 32" plasma or LCD television that weighs up to 55 lbs. Included with the plasma mount is all the necessary hardware to mount most televisions, though some may require certain screws that can be purchased at any local hardware store. This TV wall mount, also known as a plasma mount and an LCD mount, is compatible for VESA standard 50 x 50 to 100 x 100. This TV wall mount also has extending arms for up to VESA 200 x 200 to fit larger screens. The LCD mount, TV wall mount has stylish black plastic coverings for keeping the screws used to mount your display onto the wall out of sight. A plasma mount, TV wall mount has an articulating arm that allows you to position your monitor exactly where you want it. This articulating arm allows you to tilt the screen down for a better view. The large range of motion provided also allows you to tilt your monitor down up to 20 degrees and extend the arm out up to 9-1/8". This TV wall mount has clips that hold wires coming from the monitor to the arm to keep them neat. Dimensions: Bracket: 4-5/8"w x 4-5/8"h Bracket (with Extending Arms): 8-1/2"w x 8-1/2"h Wall Mounting Plate: 1-1/2"w x 6-1/8"h Weight: 2-1/2 lbs. Minimize

These LCD TV stands have a large kidney-bean shaped display ... Read more

These LCD TV stands have a large kidney-bean shaped display shelf that measures 40 inches wide. The floor-standing television racks are made from silver aluminum and includes a tilting bracket. The portable LCD TV stands hold a 32 to 42 inch monitor. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Plasma stands, LCD TV stands are ideal for use by retail stores or at trade shows. These LCD TV stands have been designed to hold a 32" to 42" plasma or LCD TV that weighs up to 70 lbs. A television display has a 200 x 200 VESA bracket that fits most makes and models of televisions. These LCD TV stands also include the necessary hardware to mount most televisions onto the bracket, though some may need specific screws you can buy at any local hardware store. Monitor stands, LCD TV stands make presentations easy and helps to capture the attention of passersby. Stand Tilts with Ease! These LCD TV stands have a large shelf included that can be used to hold a laptop for presentations of other materials. The flat screen displays, LCD TV stands come with wheels that can be attached to the base of your stand. These wheels allow you to easily maneuver the stand, and can be locked into place to provide a stable display. This LCD TV stands also feature a tilting mount that allows you to angle your television down or up for a better viewing angle. These plasma stands, LCD TV stands include (4) plastic strips that go along the pole to help keep unsightly wires in place. Dimensions: Overall: 30"w x 74-11/16"h x 16-1/2"d Base Size: 30"w x 1-5/16"h x 16-1/2"d Shelf Size: 40"w x 5/8"h x 15-3/4"d in middle, 17-3/4"d at deepest areas Television Size: 32" to 42", less than 70 Lbs. VESA: 200mm x 200mm Weight: 62 lbs. Minimize

This LCD TV wall mount is motorized! The tilt mechanism adj ... Read more

This LCD TV wall mount is motorized! The tilt mechanism adjusts by pressing a button on the remote. This LCD TV wall mount is VESA compatible to hold televisions ranging from 32" to 55" in size. The bracket sits flush against a wall, sticking out 6.25". 200mm x 200mm Standard Television Sizes In Relation To MNTELC115L Bracket 300mm x 300mm Standard Television Sizes In Relation To MNTELC115L Bracket 400mm x 200mm Standard Television Sizes In Relation To MNTELC115L Bracket 400mm x 300mm Standard Television Sizes In Relation To MNTELC115L Bracket 400mm x 400mm Standard Television Sizes In Relation To MNTELC115L Bracket 600mm x 400mm Standard Television Sizes In Relation To MNTELEC115L Bracket This remote control TV wall mount can hold a 32" to 55" plasma or LCD television that weighs up to 110 lbs. Each TV mount includes the necessary hardware to attach most televisions to this mount, though some may require specific screws that can be purchased at any local hardware store. The remote control TV wall mount is motorized to allow you to adjust the angle of your television up 5 degrees and down up to 15 degrees. Adjusting the angle of your flat panel television allows you to provide the best view. This remote control TV wall mount includes a remote control for easy angle changes. A small infrared sensor is mounted to the front of your TV wall mount so the remote control can interact with the unit. A remote control TV wall mount, like a plasma bracket and a wall mounting bracket, is VESA compatible for 200mm x 200mm to 700mm x 400mm. VESA standards are agreed upon with manufacturers of wall mounts and televisions to ensure hole patterns match across different brands. A 5ft. power cord connects a TV mount to the wall easily. This plasma bracket, remote control TV wall mount includes the necessary hardware to mount your display onto a wood stud wall or a solid concrete wall. If you have any questions regarding installation or your wall type, please consult with a professional. Buy a remote control TV wall mount today for a convenient way to display a flat screen television in your home or business! Dimensions: TV Bracket: 33-1/4"w x 8"h Television Size: 32" to 55", weighing up to 110 lbs. VESA: 200mm x 200mm - 700mm x 400mm Power Cord: 110V; 5' length Weight: 9-1/2 lbs. Minimize

This TV wall bracket is VESA compatible to hold most televi ... Read more

This TV wall bracket is VESA compatible to hold most televisions ranging in size from 32" to 50". The mount has a large range of motion, tilting and adjusting the angle of your monitor. This TV wall bracket can hold up to 132 pounds. 200mm x 200mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 300mm x 300mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 200mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 300mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 400mm x 400mm Standard Television Sizes In Relation To W2AM3250M3 Bracket 600mm x 400mm Standard Television Sizes In Relation To W2AM3250M3 Bracket Product Specifications TV Size Range: 32" - 50". Weight Capacity: 132 lbs. Distance From Wall: 4-1/4" - 14-3/4" (fully extended). VESA Compatible: 200x200; 200x100; 300x300; 400x200; 400x300; 400x400; 600x400. Downward Tilt: 15 degrees. Color: Black w/ chrome accents. A TV wall bracket includes plastic clips to help guide wires coming from your television to the wall. This helps you keep a tidier display without wires just hanging down; grouping them together allows you to more easily keep them out of sight. An LCD wall mount, TV wall bracket can hold a 32" to 50" television that weighs up to 132 lbs. This TV wall bracket is VESA compatible and we include the necessary hardware for attaching your screen to the bracket, though some may need specific screws that can be purchased at any local hardware store. A TV wall bracket, also known as a plasma mount and LCD bracket, has articulating arms that allow you to position the mount as you need, either flush with the wall or extended out. This plasma mount, TV wall bracket has tilting arms that allow you to angle your television up to 15 degrees down. A TV wall bracket also includes a clip on level that allows you to ensure you screen is parallel to the floor. A plasma mount, TV wall bracket has plastic covers to hide the screws going into the wall to create a more pleasant looking display. An LCD mount is an ideal TV wall bracket for use in offices, restaurants, bars, or homes. Dimensions: TV Bracket: 28-3/8"w x 7-1/4"h Wall Mounting Plate: 19-1/8"w x 8-1/2"h x 1/2"d Flush with Wall: 5-3/4" Fully Extended: 15-3/4" Weight: 21-1/2 lbs. Minimize