> Toys > Vehicles and Raceways > xheli

Specification 1). Main Rotor Diameter: 440 mm 2). Tail Roto ... Read more

Specification 1). Main Rotor Diameter: 440 mm 2). Tail Rotor Diameter: 94 mm 3). Overall Length: 425 mm 4). Drive Motor: 370SH 5). Tail Motor: 1225FC35 6). Battery: 7.4V 1000mAh Li-Po 7). Gyro: 3 AXIS 8). Transmitter: WK-2403 9). Receiver: RX-2440V 10).All-up Weight: 275g (Battery included) Features The design of flybarless balance characterizes low power loss and great efficiency improvement. 2). Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. 3). Compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly. 4). New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. 5). The flying time can reach 9minutes-11minutes for one battery cycle with the high performance brush motor and the high capacity Lipo battery . Minimize

NEW!! Walkera HM V200D02 2.4G Flybarless Metal Edition 4ch ... Read more

NEW!! Walkera HM V200D02 2.4G Flybarless Metal Edition 4ch Micro Helicopter RTF Pack (for Intermediate) with New WK-2403 Transmitter! With the new 2440V controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! This is the latest 2.4Ghz Walkera HMV200D02 Flybarless Brushed Micro helicopter, come in Ready-To-Fly package with all the necessary items inside. The 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. 3Compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly. New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. The flying time can reach 9minutes-11minutes for one battery cycle with the high performance brush motor and the high capacity LiPo battery. Specification Main Motor: 370SH motor Tail Motor: 1225FC35 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 94 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Receiver:  RX2440V Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Walkera HM V200D02 Flybarless Metal Brushed Helicopter 1 x Walkera Transmitter WK-2403 4CH 2.4G New! 1 x  1000mAh Battery (7.4V Li-polymer) 1 x Universal Charger Quick Start Guide and Manual in English Gift box Extra! 1 Pair of Spare Main Blades Minimize

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Meta ... Read more

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Metal Edition 4 CH Helicopter RTF w/ LCD Digital Transmitter The Flybarless Version Exceed RC Helicopter comes with the new digital LCD transmitter controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! Micro shaft transmission RC Helicopter with ALL DIRECTIONS CONTROL! It is Small and Stable, with excellent Tail Locking! This is the latest 2.4Ghz Exceed RC Classima 300 Flybarless Brushless helicopter, come in Ready-To-Fly package with all the necessary items inside. It's using shaft transmission and the 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-axis gyro control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. Specification Brushless Motor: Exceed RC-21-003 Brushless Speed Controller: Exceed RC-20A-1 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 121 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Exceed RC Classima 300 Flybarless Metal Brushless Helicopter Body 1 x Exceed RC Transmitter 4ch 2.4G Digital LCD 1 x 1000mAh Battery (7.4V Li-polymer) 1 x Battery Charger Manual in English Extra! 1 Pair of Spare Main Blades Extra! Spare Gear Set width="700" height="400"> ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description c ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description Minimize

This is the latest 2.4Ghz Walkera Lama 400, the radio contr ... Read more

This is the latest 2.4Ghz Walkera Lama 400, the radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is very stable and easy to fly, you can learn how to fly it in just 1 day. Its overall length is about 650mm (25.6 in). The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome LCD Screen, Reliable Spread Spectrum Mixer/Gyro ControlStable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship New flashing LED head and tail lights 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment High performance 2 x 380PF motor, powered by 11.1V 1500mAh Lipo, offers up to 15 minutes flight time SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Weight Saving Spread Spectrum 4-in-1 Mixer/Gyro/Receiver Board Reliable high quality mixer with built-in gyro board Suitable for Indoor/Backyard/Park flying Digital Proportional Motor Speed Control The main rotor blades are using top quality plastic materials, which is not easily break Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner and Advanced hobbyist This helicopter is an ideal investment for those people looking to move onto the larger scale helicopters, and can give you excellent training in preparation to fly the big birds!! Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)   Main Rotor Diameter: 497mm (19.6 inch) Length: 650mm (25.6 inch) Flying Weight: 580g (20.5 oz) Driven system: 2* 380PF carbon brushed motors Servo: 2x 8.4g micro servos (speed 0.12sec/60o(4.8V);torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm) Battery: 11.1V 1500mAh Li-polymer Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2402 and 4-in-1 Receiver RX-2413 Radio Control Range: 3300 feet (1000m)   Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter w/ Training Switch, Wall Battery Balance Charger LCD Screen 11.1V 1500mAh Li-Polymer Rechargeable Battery English Manual Minimize

This is the All-New improved E-RAZOR 450 Carbon Fiber Editi ... Read more

This is the All-New improved E-RAZOR 450 Carbon Fiber Edition with 2.4GHz Radio by Dynam.  This is a fully-loaded machine that includes full aluminum alloy upgrade, a carbon fiber main frame, carbon fiber main blades, carbon fiber tail boom and tail blade and a high performance head lock gyro (GY48V). It is completely ready to fly with a 2.4G radio system that offers NO interference.  You can flip and twist without worry.  This thing will punch holes through the sky like none others. Features: 1. Simplify, compact and high-rigidity Carbon Fiber frame. let all electric system install easy and nice looking. 2. Use Direct-belt-drive, save power and let helicopter very quiet. 3. Use new gear inverse design:13:105, let motor more powerful and long-time. 4. By optimize design of tail gear inverse 51:11 and more long tail-blade journey, let helicopter tail more Smooth and easy lock when you flying. 5. Simple, separate servos-frame, let flyer easy install and repair. 6. In main Carbon fiber frame, use 3pcs belling, insure to the main shaft concentric and less shake. 7. High-precision Carbon fiber tail double-push frame, more smooth and wearable. 8. The separate main gear let flyer install and repair more easy and fast. 9.Carbon fiber tail boom. 10. Carbon fiber main blade. 11. Carbon fiber tail blade. 12. Carbon fiber main frame. 13. High performance head lock gyro (GY48V) 14. Full aluminum alloy upgrade. Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter: 6CH RTF 2.4Ghz 3. Length: 25.8in (655mm) 4. Main Rotor Diameter: 28.3in (720mm) 5. Tail Rotor Diameter: 5.3in (135mm) 6. Gross Weight: RTF with li-po battery(670g) 7. Battery: 11.1V 2200MAH 15C li-polymer 8. Motor: Brushless 2750KV 9. Control mode: 120-Degree CCPM system Features 1) 2.4G 6CH transmitter encoder applies 6-channel micro computer system and 2.4G spread spectrum technology, which features automatic code pairing and ID assignment with prompter response, higher sensitivity and stronger anti-jamming capacity. (2) On the reverse of transmitter there are a number of DIP switches, which may be used in conjunction with a variety of different servos. Servo Weight: 9g Torque:4.8V 1.5kg-cm Speed:4.8V/0.12sec/60° Size(mm):24×11×24 ESC Size: 50x25x7mm Weight: 23g Current: 40A [Ni/NiMh]/servos: 6/5 8/5 10/4 12/3 [Li-XX]/servos: 2/5 3/4   Minimize

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Meta ... Read more

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Metal Edition 4 CH Helicopter RTF w/ LCD Digital Transmitter The Flybarless Version Exceed RC Helicopter comes with the new digital LCD transmitter controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! Micro shaft transmission RC Helicopter with ALL DIRECTIONS CONTROL! It is Small and Stable, with excellent Tail Locking! This is the latest 2.4Ghz Exceed RC Classima 300 Flybarless Brushless helicopter, come in Ready-To-Fly package with all the necessary items inside. It's using shaft transmission and the 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-axis gyro control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. Specification Brushless Motor: Exceed RC-21-003 Brushless Speed Controller: Exceed RC-20A-1 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 121 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Exceed RC Classima 300 Flybarless Metal Brushless Helicopter Body 1 x Exceed RC Transmitter 4ch 2.4G Digital LCD 1 x 1000mAh Battery (7.4V Li-polymer) 1 x Battery Charger Manual in English Extra! 1 Pair of Spare Main Blades Extra! Spare Gear Set ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description c ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description ExceedHeli-Classima300-Metal Description Minimize

Product Name: E-RAZOR 450 (2.4Ghz) Item: DY8918-B Features: ... Read more

Product Name: E-RAZOR 450 (2.4Ghz) Item: DY8918-B Features: 1. Simplify, compact and high-rigidity frame. let all electric system install easy and nice looking. 2. Use Direct-belt-drive, save power and let helicopter very quiet. 3. Use new gear inverse design:13:105, let motor more powerful and long-time. 4. By optimize design of tail gear inverse 51:11 and more long tail-blade journey, let helicopter tail more Smooth and easy lock when you flying. 5. Simple, separate servos-frame, let flyer easy install and repair. 6. In main frame, use 3pcs belling, insure to the main shaft concentric and less shake. 7. High-precision tail double-push frame, more smooth and wearable. 8. The separate main gear let flyer install and repair more easy and fast. Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter:6CH RTF 2.4Ghz 3. Length: 25.8in (655mm) 4. Main Rotor Diameter: 28.3in (720mm) 5. Tail Rotor Dianeter: 5.3in (135mm) 6. Gross Weight: RTF with li-po battery(670g) 7. Battery: 11.1V 2200MAH 15C li-polymer 8. Motor: Brushless 2750KV 9. Control mode: 120-Degree CCPM system   Features ( 1) 2.4G 6CH transmitter encoder applies 6-channel micro computer system and 2.4G spread spectrum technology, which features automatic code pairing and ID assignment with prompter response, higher sensitivity and stronger anti-jamming capacity. (2) On the reverse of transmitter there are a number of DIP switches, which may be used in conjunction with a variety of different servos.     Servo Weight: 9g Torque:4.8V 1.5kg-cm Speed:4.8V/0.12sec/60° Size(mm):24×11×24     ESC Size: 50x25x7mm Weight: 23g Current: 40A [Ni/NiMh]/servos: 6/5 8/5 10/4 12/3 [Li-XX]/servos: 2/5 3/4     Minimize

The Walkera 22E is a entry level 6 Channel Collective Pitch ... Read more

The Walkera 22E is a entry level 6 Channel Collective Pitch Helicopter (CP Helicopter), it adapts Tail Motor design. Motor driven tail rotor provides some advantage to beginners, because the lack of Rudder Servo, you have one thing less to worry. You simply change the tail motor if the tail fails to hold, this is some good news for beginners. Walkera 22E 2.4G Edition is a very good choice for first time flyer. The power is good enough for hovering or even 3D action. The parts are easy to find and the price is low. The mechanism cannot be more simple. It is not difficult to calibrate and maintain for a beginner. That's very important. Specification 1). Receiver: RX-2601 2). Tail Rotor Diameter: 150 mm 3). Main Rotor Diameter: 550 mm 4). Overall Length: 580 mm 5). Tail Motor Type: 1225FE33 6). Gyro: Built-in 7). All-up Weight: 373 g (Battery included) 8). Transmitter: WK-2602 9). Main Motor Type: 370 SH 10).Battery: 11.1V 800mAh Li-Po 11).Servo: weight 8.5g ;speed 0.11sec/60 o ;torque 0.9kg/cm ; dimension 22.5*11.5*24mm Features 1). CCPM mixing control system and collective pitch control system make perfect 3D maneuvers such as rolls, inverted, and swoop flights. 2). Fiber main frame and metal tail boom make 22#E firm and simplified. Easy-to-be mounted parts like servo are adopted. 3). Brushed motor as the main power is powerful and makes the flight much stable. 4). High quality servo is prompt in reaction; it matches with the strong magnetic tail motor and can fly various flight courses. 5). The flight time on 11.1V 800mAh Li-Po battery pack will be 7- 9 minutes, depending on your flight 6). The usage of 2.4G technology is prompter in reaction, more sensitive in operation, and stronger in anti-interference 7). New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time. Minimize

Setup/Tutorial Video Receiver-Ready Ver. 2.4GHz PDF Manual ... Read more

Setup/Tutorial Video Receiver-Ready Ver. 2.4GHz PDF Manual "The MOST AWESOME 3D Radio Controlled Helicopter! FULLY-LOADED 2.4GHz" The BlueRay 450PE a fully loaded version 2.4GHz PREMIUM EDITION CCPM 3D RC helicopter, 100% built, Ready-to-Fly!  Light and fast, this new machine from Exceed RC has everything you ever wanted.  The BlueRay 450 Premium Edition Helicopter is an advanced rc helicopter designed with the most updated current technology available and produced with the highest quality CNC machining. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the BlueRay450 PE is designed with the best features available while eliminating all the weak points from the current T-REX SE.  All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings.   What is 2.4Ghz Technology? New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club’s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. The Exceed-RC BlueRay 450PE uses a combination of tough, lightweight aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you can have it flying in just a few hours. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC BlueRay 450PE offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos Expect only the best as you experience tight, precise control and quick response as the Exceed-RC BlueRay 450PE will dazzle you with agility and speed. Using the basics of micro electric design to keep components light and durable while distributing heat away from electronic, the Exceed-RC BlueRay 450PE is not only precise, but also efficient. When you combine precision and efficiency and add beauty, you will arrive at the Exceed-RC BlueRay 450PE : The Ultimate Super Electric Helicopter. Highlights 100% Ready-to-Fly 6 Channel 2.4GHz R/C Set included , complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New CNC/Composite Fiber Super Frame; only 1.2 mm, improve the rigidity and perfect for 3D flying. High quality CNC aluminum alloy rotor head & tail set CNC Main Blade Grips CNC Main Rotor Hub CNC Washout Set CNC Swashplate CNC Tail Push Rod Support End w/ Carbon Fiber Rods CNC Tail Servo Mount CNC Horizontal Fin Holder CNC Tail Gear Case CNC Tail Pitch Lever CNC Tail Rotor System SuperFrame CNC Parts High rigidity/Strong aluminum tail boom CCPM version, new aluminum parts for prompt, precision acti Minimize

This is the latest 2.4Ghz Walkera Lama 400, the radio contr ... Read more

This is the latest 2.4Ghz Walkera Lama 400, the radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is very stable and easy to fly, you can learn how to fly it in just 1 day. Its overall length is about 650mm (25.6 in). The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome LCD Screen, Reliable Spread Spectrum Mixer/Gyro ControlStable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship New flashing LED head and tail lights 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment High performance 2 x 380PF motor, powered by 11.1V 1500mAh Lipo, offers up to 15 minutes flight time SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Weight Saving Spread Spectrum 4-in-1 Mixer/Gyro/Receiver Board Reliable high quality mixer with built-in gyro board Suitable for Indoor/Backyard/Park flying Digital Proportional Motor Speed Control The main rotor blades are using top quality plastic materials, which is not easily break Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner and Advanced hobbyist This helicopter is an ideal investment for those people looking to move onto the larger scale helicopters, and can give you excellent training in preparation to fly the big birds!! Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)   Main Rotor Diameter: 497mm (19.6 inch) Length: 650mm (25.6 inch) Flying Weight: 580g (20.5 oz) Driven system: 2* 380PF carbon brushed motors Servo: 2x 8.4g micro servos (speed 0.12sec/60o(4.8V);torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm) Battery: 11.1V 1500mAh Li-polymer Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2402 and 4-in-1 Receiver RX-2413 Radio Control Range: 3300 feet (1000m)   Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter w/ Training Switch, Wall Battery Balance Charger LCD Screen 11.1V 1500mAh Li-Polymer Rechargeable Battery English Manual Minimize

This is the newly built and redesign Falcon 40, ready to fl ... Read more

This is the newly built and redesign Falcon 40, ready to fly, 2.4Ghz Falcon 40 Helicopter from Exceed RC. Never before have electronics of this quality been utilized in an popular RC Beginner Helicopter. Thanks to sophisticated components and advanced engineering, the 2.4Ghz Falcon 40 are not only ready to fly, they fly remarkably easy as well. The high-efficiency tail rotor motor offers perfect flight performance of the helicopters. Digital servos deliver high-speed stability and precise centering for greater control, The most popular beginner helicopter just got better with the new advance radio system that includes a 2.4GHz receiver.   Exceed RC Radio Remote Control Helicopter - Falcon 40 - Fixed Pitch 90 degree Swashplate Suitable for Indoor and Outdoor 370 Carbon brush main motor 4-ch 2.4Ghz Remote Control w/ LCD Monitor 3-in-1 receiver Bulit-in Gyro Lightweight and Solid Structure Item Packing 3 in 1 Mixer / Gyro / 2.4Ghz Receiver Board 2 X 9g Servos Transmitter 4 2.4Ghz Remote Channel w/ LCD Monitor Lipo Battery 7.4v 800mah Rechargeable battery AC Adaptor charger Instruction Manual Product Details Main Rotor Span : 510mm Tail Rotor Span : 145mm Fuselage length : 469mm Product Dimensions (mm) : 460L.x150W.x160H. Item Size (mm) : 550 L.x230 W. x140 H. Weight : without battery 185g Item Features Full Function Radio Controlled New 2.4 GHz Spread Spectrum Transmitter, Awesome Look Cabin, Reliable Spread Spectrum Mixer/Gyro Control, More Stable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time Factory Pre- assembled, zero assembly time Carbon Fibre flybar and boom for Superior strength and durability Suitable for Indoor / Outdoor / Backyard / Park ( 500 sqft area ) 10-15 minutes Flight time for each charge Brand New, with original package Full spare Parts available Brand New, with original Package Complete kit Minimize

  Product Name: E-RAZOR 250 Item: DY8919 Specification: 1. ... Read more

  Product Name: E-RAZOR 250 Item: DY8919 Specification: 1.  Type: RTF Electric 3D Heli 2.  Transmitter:6CH RTF 2.4Ghz 3. Length: 420mm 4. Height: 161mm 5.  Main Rotor Diameter: 438mm 6.  Tail Rotor Dianeter: 105mm 7.  Gyro: GY192 Head Lock Gyro 8.  Battery: 7.4V 850MAH 15C li-polymer 9. Motor: Brushless 4800KV 10.  Servo: 7g*4pcs Features: 1. Simplify, compact and high-rigidity frame. let all electric system install    easy and nice looking. 2. Use Direct-belt-drive, save power and let helicopter very quiet. 3. Simple, separate servos-frame, let flyer easy install and repair. 4. In main frame, use 3pcs belling, insure to the main shaft concentric and    less shake. 5. High-precision tail double-push frame, more smooth and wearable. 6. The separate main gear let flyer install and repair more easy and fast.        Instruction Manual    |    FMS               Features ( 1) 2.4G 6CH transmitter encoder applies 6-channel micro computer system and 2.4G spread spectrum technology, which features automatic code pairing and ID assignment with prompter response, higher sensitivity and stronger anti-jamming capacity. (2) On the reverse of transmitter there are a number of DIP switches, which may be used in conjunction with a variety of different servos.     Brushless motor 4800KV     Servo Weight: 7g Torque:4.8V 1.6kg-cm Speed:4.8V 0.1sec/60° Size(mm): 21.8×11×19.8     ESC Size(mm): 50 X 25 X 7 Weight: 21g Current: 15A NiCd/NiMh] /servos: 6/4 8/4 10/2 [Li-xx]/servos: 2/4 3/3       Receiver Type: FM Channel: 6CH Frequency:72MHz/35MHz/36MHz     Gy192 Head Lock Gyro Dimension: 20.0 x 20.0 x 10.0mm Weight: 5.7g with Plastic Case Operation Voltage: 4.8 V ~ 6.0V Operation Current: 15mA (5V) Gyro Gain: Remote / Single Gain Heading Lock: Remote On/Off     7.4V 850mAh 15C Li-Po Battery Minimize

Walkera HM 4-3B 2.4G Brushless Motor Edition is a evolution ... Read more

Walkera HM 4-3B 2.4G Brushless Motor Edition is a evolution of the well-known micro helicopter - 4#3B. It is equipped with High Performance Brushless Motor, Electronic Speed Controller, High Speed Tail Motor, Redesigned Body Frame, 2.4GHz advanced radio system, Metal Swashplate, Metal Blade Clamp and Metal Rotor Head. This is the latest 2.4Ghz Walkera 4-3, the super micro radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is stable and easy to fly, you can learn how to fly it in 1-2 days. Its overall length is only 185mm controlled by 2 x 3.5g only micro servos. With compact 90 degree swash plate structure, the servo and other parts are easy to install. The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Walkera HM 4-3B Features The 4#3 comes with a small and simple layout that’s very clean and robust. Everything flows really well, as the writing is organized and all the components are laid out with room to spare. Super mini servo (3g) is prompt and accurate in reaction; One cell Li-Po battery at 3.7V 400mAh offers 8- to 10-minute flight after fully charged; 4-channel transmitter with visible power indicator can avoid helicopter losing control due to the shortage of battery power, and support you to fly without any worry. ROTOR BLADE The main rotor blades are conventional plastic blades commonly found in fixed pitch designs, it is designed with a predetermined angle of attack and both blades are attached together in a single assembly. The blades also have a unique color scheme (which is breath of fresh air) and even contains a well- written warning. COMPONENT LAYOUT The 4#3 uses two small servos that mount to both sides of the frame with all aluminum tabs directly below the swash. The motor is mounted inverted, directly in front of the aluminum swash and on the frame itself. There is a designated battery tray that is mounted to the main frame which snugly holds the battery. The receiver mounts on a tray in the very front which screws to the frame. LANDING GEAR The one- piece landing gear consists of a very thin wire- like metal materials that runs through a small top on the bottom of the frame. It can also be disconnected from the loops in the back. HEADBLOCK The aluminum head block a small o- ring type damping system due to the over lapping style plastic blades, and it is clamped to the main shaft. It also utilizes a swiveling fly bar that is attached with small brass inserts. CANOPY The plastic canopy comes pre- painted with a black windshield and a red and black color scheme. It has two slits in the bottom where the landing gear slides in, and it utilizes two grommets on the back that attach to a single plastic rod. SWASHPLATE The all aluminum swash plates are bearing supported and because of the heli’s fixed – pitch design it sits permanently in the same position. It is directly connected to only two servos with the use of integrated balls. It uses a anti rotation pin that slides freely in the anti rotation bracket. DESIGN The frame is a simple, small one piece plastic design. Both the plastic battery mount and front receiver tray both to it.                                                    >> DRIVE TRAIN >>> MOTOR MOUNT The motor is mounted directly in front of the main gear in an inverted position. It is bolted to the frame itself by way of two self- tapping screws. PINION The pinion is made of plastic and meshes directly to the main gear. MAIN GEAR The black plastic main gear is retained with a very small Jesus pin and has large cutouts in order to reduce its weight. TAIL DRIVE The tail is a motor driven so there isn’t any Minimize

400Class Agusta Double rotor Heli A large level coaxial hel ... Read more

400Class Agusta Double rotor Heli A large level coaxial helicopter with very scale apperance,easy enough for anyone to fly,not only indoors hut also outdoors. Specification:  Length 650mm/25.6in  Width 140mm/5.5in  Height 330mm/13in  Main rotor diameter 570mm/22.4in  Weight (without battery) 745g/26.3 oz  Flying weight (with battery) 860g/30.3 oz Configuration:  R/C System EFLY-4BII 2.4GHz  Motor 390x2 Brushed  PCB DR-REV2.1  Battery 11.1V,1600mAh Li-Po  Servo 9gx2  1.109 Power is a typical coaxial rotor blade helicopter. One injected modeling for the main rotor head and the core shaft, the swash plate and servo arm are connected by the copper ball buckle, with a great feature of stable flying, easy to control and with super crash-resistance characteristics, it is strongly recommended to the beginner.  2.With convex airfoil foam blade, tampo printing techniques, beautiful and attractive colorful appearance, this ensures stable flight performance to the model. the great lift force , low air resistance, stable flight performance and suitable for the outdoor flight.  3.The new PCB :  DR-REV2.1 with the head-lock mode and can be performed head-lock function with ease and much more precised.  4.High scaled canopy, with contraposition silk-screen printing techniques, beautiful and vivid appearance.  5.Suitable for indoors and outdoors flight in breeze. Minimize

Do you like the good looking Expert Helicopters, but you th ... Read more

Do you like the good looking Expert Helicopters, but you think you are not ready for it yet? Try the new helicopter from Walkera - presenting the CB180D. You get Co-Axial Helicopters feels-like handling, very easy to hover. The CB180D looks just like a Expert Helicopter, very small size that no longer than your computer keyboard, using Fixed Pitch Blades, Hiller stabilizer bar (common design for RC helicopters), a High Power Main Motor + Tail Motor combination, Shaft Driven Tail Rotor, making the CB180D very easy to hover and flying around. Basically it is a advanced design from the Walkera 4#3B, we tested this model and the feeling is pretty much like the 4#3B, so we would say if you are ok to play with the 4#3B, you are ok to play with this beautiful scale fuselage Helicopter.   The CB180D is equipped with 2.4G radio system and metal upgrades as well, that makes it more Durable and more Precise. ?#60;/P> Ready To Fly - 99% Pre-Installed! Overall Length - 460mm (18.11 inches) Main Rotor Diameter - 440mm (17.3 inches) All-up Weight - 288g (Battery included) 2.4GHz New Generation Radio System 2.4GHz is the standard of new generation radio system. It offers longer transmission distance, less interference, more stable radio transmission and less legal issue. For traditional radio frequency, helicopters in same frequency cannot fly together because of interference. With 2.4GHz radio system, many helicopters can fly at the same time without interference. 1. 4-Ch 2.4GHz New Generation LCD Radio System 2. Pre-assembled Helicopter 3. Battery Charger 4. 7.4V 1000mAh Li-Po Battery 5. Instruction Manual   Minimize

Ultra lightweight carbon fiber frames and metal blade grips ... Read more

Ultra lightweight carbon fiber frames and metal blade grips with thrust bearings are two examples of the quality features designed into this great helicopter! Carbon Fiber Frame Version Kit Includes: EXI 500 CF Kit Main Rotor Blades NOT included. This is a kit version, assembly required. (the factory already completed the assembly for the rotor head, tail section, and main frame, you just need to put in the tail boom, main gear, and landing skid Features Electric Power System Simple lightweight design provides an awesome flight performance and extreme 3D capability Rigid Carbon Fiber Frame design Beautiful Factory Painted  Plastic Canopy Rotor head/tail with thrust bearings Direct to swash CCPM linkage Center of gravity battery tray designed close to the rotor head Tail rotor drive belt system Fully driven tail auto rotation system Tail servo mount boom CNC-Complete Rotor Head CNC-Complete Tail Assembly CNC Aluminum Tail-Boom Holder Specifications: Length: 850mm Height: 310mm Main Blade Length: 425mm Main Rotor Diameter: 970mm Tail Rotor Diameter: 200mm Motor Drive Gear: 12T/13T Main Drive Gear: 162T Autorotation Tail Drive Gear: 145T Tail Drive Gear: 31T Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68 Weight (w/o power system): 935g Flying Weight: Approx 1700g Radio transmitter and electronic equipment required for assembly: Transmitter(6-channel or more, helicopter system) Receiver(6-channel or more) Mini servo (3) Head lock gyro Specialized Tail Servo Pitch gauge 60A Brushless ESC 500 size Brushless motor (1600KV) 22.2V 6S Li-Poly 2100~2500mAh battery 425mm main blade Carbon Fiber Frame Complete CNC-Rotor Head Complete CNC Tail Boom Assembly Complete CNC-Tail Assembly Minimize

New Walkera Flybarless V-Series 120D02-2603TX RTF Micro CP ... Read more

New Walkera Flybarless V-Series 120D02-2603TX RTF Micro CP Brushless Helicopter Bind & Fly ARF!     Metal main rotor blades set Tail Rotor System Metal main rotor blades set Canopy Specifications: • Main Rotor Diameter: 302 mm • Tail Rotor Diameter: 85 mm • Overall Length: 290 mm • All-up Weight: 88g (Battery included) • Battery: 3.7V 600mAh Li-Po • ESC: WK-WST-10A-L3 • Brushless Motor: WK-WST-12-003 Features: • Flybarless system: The metal rotor head cut by CNC, designed without flybar, features low power loss and great efficiency improvement. • Power system: brushless motor ensures the safety of power and offers smart control feeling. • The usage of flybarless balance electronic system can automatically amend the flight status and is of the similar stability of flybar system, but of much agiler 3D performance. Requirement: WK-2603 2.4Ghz Transmitter+Receiver: RX-2610V LiPo Charger Minimize

    Model Platinum-150A-PRO Manual User Manual Preview Plat ... Read more

    Model Platinum-150A-PRO Manual User Manual Preview Platinum-150A-PRO ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter. 1 Typical Applications 1.1 Very powerful for 600 class helicopter (Working with 6 cells Lipo battery) 1.2  Very powerful for 700 class helicopter (Working with 6 cells Lipo battery) 1.3 Very powerful for huge scale aircraft such as F3A (Working with 6 cells lipo battery) 2 Specification 2.1 Output: Continuous 150A, burst 220A up to 10 seconds. 2.2 Input Voltage: 2-6 cells lithium battery or 15-18 cells NIMH battery. 2.3 BEC: None. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) 2.6 Size: 88mm (L) * 55mm (W) * 16mm (H). 2.7 Weight: 125g. 3 Features 3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 3.4 Smooth, linear, quick and precise throttle response. 3.5 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference. 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection. 3.7 Perfect governor mode for helicopter. 3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field. Minimize

KX015073 TREX 450 PRO Kit  Detailed Description   This Kit ... Read more

KX015073 TREX 450 PRO Kit  Detailed Description   This Kit Includes: • T-REX 450 PRO Kit Set X1 set • 325 Carbon blades X1set • RCE-BL35X 35A Brushless ESC X1 • 430SP Brushless motor(3700KV) X1   Features: • Newly designed head block with high rigidity and stability. • Single piece integrated design of main bearing block and servo mount. • Single piece integrated design of anti-rotation guide and gyro mount. • Single piece integrated landing gear. • Highly stable flybar control system. • High precision bearing mixing arms. • Newly designed high resolution swashplate. • Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane. • Highly rigid frame with single piece carbon side and bottom plates. • Highly efficient shaft driven tail design. • Weighted tail rotor blade grips to repel centripetal forces. • Straight-up in-frame rudder servo mount for improved geometry. • Newly designed aerodynamic canopy. • Newly designed high torque motor. • Newly designed high strength main blade grips.   Specifications: •   Length:   635mm •   Height:   230mm   •   Main Rotor Diameter:   710mm •   Tail Rotor Diameter:   158mm •   Motor Pinion Gear:   13T •   Main Drive Gear:   150T •   Autorotation Tail Drive Gear:   106T •   Tail Drive Gear:   25T •   Drive Gear Ratio:   1:11.5:4.24 •   Weight(w/o power system):   450g •   Flying Weight:   Approx.780g   Photos: High precision main rotor assembly High precision bearing mixing arms Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane Single piece integrated design of anti-rotation guide and gyro moun High precision main drive gear with dual cooling fan design patent Highly rigid frame with single piece carbon side and bottom plates/1.2mm Newly designed high resolution swashplate/Single piece integrated design of main bearing block and servo mount Metal designed tail drive gear assembly Highly efficient shaft driven tail design Centripetal forces balance tail rotor holder Straight-up in-frame rudder servo mount for improved geometry Metal stabilizer belt Single piece integrated landing gear Fiberglass painted canopy 325 Carbon blades     BL430SP extended high torque brushless motor       Minimize

This is the latest Super Mini Walkera CB100 Helicopter w/ B ... Read more

This is the latest Super Mini Walkera CB100 Helicopter w/ Brushless Main and Tail Motors, Ready to Fly! This super micro radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is stable and easy to fly, you can learn how to fly it in 1-2 days. Its overall length is only 216mm controlled by 2 x 3.5g only micro servos. With compact 90 degree swash plate structure, the servo and other parts are easy to install. The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity.   Feature: 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome Look Cabin, Reliable Spread Spectrum Mixer/Gyro Control, More Stable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time New Twin Brushless Main and Tail Motors and ESCs for Better Performance and Durabilities New Simplified 90 degree swashplate with CNC-cut rotor head features higher durability and stability New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Powerful WK-WS-12-003 Brushless Motor as main motor and WK-WS-10-002 Brushless Tail Motor Transmitter provides connection port for computer simulation software Super mini servo (3g) is prompt and accurate in reaction 4-channel transmitter with visible power indicator can avoid helicopter losing control Solid servo mounts for precise control Screw-on frame for easy repair More stable flight, even first timer can control easily Reliable high quality mixer with built-in gyro board Factory Pre- assembled, zero assembly time Pre-positioned servo mounts for easy set up The Sliding swash plate can help you operate the R/C Helicopter Freely Newly Designed Rotor Head gives better control Digital Proportional Motor Speed Control Suitable for Indoor/Outdoor/Backyard/Park The main rotor blades are using top quality plastic materials, which is not easily break Approximately 10 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner - Advanced hobbyist All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying) Specification: Main Rotor Diameter: 202mm (8 inch) Tail Rotor Diameter: 48mm (2 inch) Overall Length: 216mm (8.5 inch) Flying Weight: 66g (2.3 oz) Gyro: Built-in Driven system: WK-WS-12-003 Brushless Main Motor & WK-WS-10-002 Brushless Tail Motor Servo: 2X 3.18g servos (speed 0.12sec/60o(3.0~4.5V);torque 0.12kgf.cm(3.0~4.5V) ; dimension 19.2*8.3*19.7mm) Battery: 3.7V 500mAh Li-Polymer ESC: WK-WST-10A-LT & WK-WST-10A-L2 Brushless Speed Controllers Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2402 and 4-in-1 Receiver RX-2406C Radio Control Range: 3300 feet (1000m) Package Include: Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter w/ Training Switch and Simulator Port Wall Battery Charger High Quality 3.7V 500mah Li-Po Rechargeable Battery Extra Set of Main Blades Extra Tail Blade English Manual Minimize

  Specification: 1. Type: RTF Electric 3D Heli 2. Transmitt ... Read more

  Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter:6CH RTF 2.4Ghz 3. Length: 420mm 4. Height: 161mm 5. Main Rotor Diameter: 438mm 6. Tail Rotor Diameter: 105mm 7. Gyro: GY192 Head Lock Gyro 8. Battery: 7.4V 850MAH 15C li-polymer 9. Motor: Brushless 4800KV 10. Servo: 7g*4pcs Features: 1.Simplify, compact and high-rigidity frame. let all electric system install easy and nice looking. 2.Use Direct-belt-drive, save power and let helicopter very quiet. 3.Simple, separate servos-frame, let flyer easy install and repair. 4.In main frame, use 3pcs belling, insure to the main shaft concentric and less shake. 5.High-precision tail double-push frame, more smooth and wearable. 6.The separate main gear let flyer install and repair more easy and fast.   Minimize

New Walkera Flybarless V-Series 120D02-2603TX RTF Micro CP ... Read more

New Walkera Flybarless V-Series 120D02-2603TX RTF Micro CP Brushless Helicopter! With 2603 LCD Transmitter Now Walkera has developed the Smallest Flybarless CP Helicopter in the World - the V120D02. It is a Palm Size Helicopter, with Collective Pitch Flybarless Rotor Head and a 10000KV brushless motor, it can resist light breeze in outdoor condition, so you can fly in beautifully in the backyard or in the park! It also has everything you find on a big helicopter, like three CCPM servos, Brushless Motor and ESC, a 2.4Ghz All-in-One Receiver, a Gyro (3-Axis) and a Rudder Servo, the only difference is the V120D02 is even better, because it has a 3-Axis Gyro which other RC Helicopters usually don't have. Using the most common swashplate design in recent days, the main advantage of Flybarless CCPM swashplate design is that it has much less parts than ordinary RC Helis, less complicated to assemble and repair and because of the swashpalte was supported by 3 servos, it can distributes the forces over all 3 servos, leading to less workload on the servos.         Metal main rotor blades set Tail Rotor System Metal main rotor blades set Canopy   Specifications: • Main Rotor Diameter: 302 mm • Tail Rotor Diameter: 85 mm • Overall Length: 290 mm • All-up Weight: 88g (Battery included) • Battery: 3.7V 600mAh Li-Po • ESC: WK-WST-10A-L3 • Brushless Motor: WK-WST-12-003Receiver: RX-2610V Features: • Flybarless system: The metal rotor head cut by CNC, designed without flybar, features low power loss and great efficiency improvement. • Power system: brushless motor ensures the safety of power and offers smart control feeling. • The usage of flybarless balance electronic system can automatically amend the flight status and is of the similar stability of flybar system, but of much agiler 3D performance.   Minimize

This is the latest 2.4Ghz Walkera Lama 400, the radio contr ... Read more

This is the latest 2.4Ghz Walkera Lama 400, the radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is very stable and easy to fly, you can learn how to fly it in just 1 day. Its overall length is about 650mm (25.6 in). The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome LCD Screen, Reliable Spread Spectrum Mixer/Gyro ControlStable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship New flashing LED head and tail lights 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment High performance 2 x 380PF motor, powered by 11.1V 1500mAh Lipo, offers up to 15 minutes flight time SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Weight Saving Spread Spectrum 4-in-1 Mixer/Gyro/Receiver Board Reliable high quality mixer with built-in gyro board Suitable for Indoor/Backyard/Park flying Digital Proportional Motor Speed Control The main rotor blades are using top quality plastic materials, which is not easily break Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner and Advanced hobbyist This helicopter is an ideal investment for those people looking to move onto the larger scale helicopters, and can give you excellent training in preparation to fly the big birds!! Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)   Main Rotor Diameter: 497mm (19.6 inch) Length: 650mm (25.6 inch) Flying Weight: 580g (20.5 oz) Driven system: 2* 380PF carbon brushed motors Servo: 2x 8.4g micro servos (speed 0.12sec/60o(4.8V);torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm) Battery: 11.1V 1500mAh Li-polymer Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2402 and 4-in-1 Receiver RX-2413 Radio Control Range: 3300 feet (1000m)   Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter w/ Training Switch, Wall Battery Balance Charger LCD Screen 11.1V 1500mAh Li-Polymer Rechargeable Battery English Manual Minimize

Walkera 4#3Q 2.4GHz Helicopter RTF Walkera HM 4#3Q 2.4G Met ... Read more

Walkera 4#3Q 2.4GHz Helicopter RTF Walkera HM 4#3Q 2.4G Metal Edition is a new generation palm size helicopter equipped with scale canopy, 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4#3Q offers more stable, silence and smoother flight. It is not a 2-channles toy. It is a serious rc helicopter for players from intermediate to experts. You can control it moving up and down, forward and backward, left and right and rotation. It is a serious hobby, not a toy. 2.4GHz is the standard of new generation radio system. It offers longer transmission distance, less interference, more stable radio transmission and less legal issue. For traditional radio frequency, helicopters in same frequency cannot fly together because of interference. With 2.4GHz radio system, many helicopters can fly at the same time without interference Specification Tail Rotor Dia.: 58 mm Main Rotor Dia.: 204 mm Overall Length: 207 mm Drive Motor: 1220 (Strong magnet) Tail Motor: N51 (Strong magnet) Battery: 3.7V 400mAh Li-Po Receiver: RX-2415 Transmitter: WK-2401 Gyro: Built-in All-up Weight: 50-51.8g (Battery included) Features Simplified 90?swash plate with highly emulational shape with the-state-of-the-art workmanship. New 2.4G technology with the functions of automatic identification, precise code pairing and strong anti-jamming. 4#3Q, equipped with stroke servo, features light weight, easy operation, prompt response and fine travel control. High performance 1220 motor powered by 3.7V 400mAh Lipo offers 8- to 10-minute flight time, depending on your flight mode.   Minimize

NEW!! 2.4G Walkera 4F200 3Blades FLYBARLESS BRUSHLESS METAL ... Read more

NEW!! 2.4G Walkera 4F200 3Blades FLYBARLESS BRUSHLESS METAL Edition with New 3 Axis Gyro System Bind and Fly ARF Helicopter   Simulated three-blade structure takes advantage of high efficiency and steady flight. Products Description: 1). Simulated three-blade structure takes advantage of high efficiency and steady flight. 2). 3-axis controlled balance system provides accurate flight location. 3). Brushless motor absolutely features both longevity and power. Metal main rotor blades set Metal tail rotor blades set   4F200 Specification: 1).Main Rotor Dia. : 436mm 2).Tail Rotor Dia. : 106mm 3).Overall Length: 428mm 4).Receiver: RX-2612V 5).Brushless Motor: WK-WST-21-004 6).Brushless Speed Controller: WK-WST-20A-2 7).Servo: WK-7.6-6 weight 8.5g/ speed 0.09sec/60C(4.8V) Torque 0.9kgf.cm/ dimension 22.5 X 11.5 X 24mm 8).Rudder Servo: WK-0902H weight 8.2g/ speed 0.08 sec/60C (4.8V) torque 2.0kgf.cm/ dimension 22.4 X 11.9 X 26.5mm 9).Battery: 7.4V 1200mAh 10).Weight: 360g (Battery included)     Package Include: Walkera 4F200 FLYBARLESS Brushless Metal Edition 2.4G 6CH Helicopter ( Receiver-Ready ) 7.4V 1200mAh Rechargeable Li-polymer Battery Walkera hand band for transmitter X 1 DSC Cable X 1 English Manual Requirement: 6-channels 2.4G Transmitter (WK-2603) with large LCD display ( Not Included ) LiPo Charger Minimize

Specification 1).Main Rotor Diameter: 518 mm 2).Tail Rotor ... Read more

Specification 1).Main Rotor Diameter: 518 mm 2).Tail Rotor Diameter: 146 mm 3).Overall Length: 473 mm 4).Drive Motor: 370SH 5).Tail Motor: 1220FE33 6).Battery: 7.4V 800mAh Li-Po 7).Gyro: 3 AXIS 8).Transmitter: WK-2403 9).Receiver: RX-2446V 10).All-up Weight: 267g (Battery included) Features 1).The design of flybarless balance characterizes low power loss and great efficiency improvement. 2).Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. 3).Compact swashplate structure is adopted with light and fine fuselage. It is super stable to fly. 4).New 2.4G technology, with the functions of identification and precise code pairing. 5).The flying time can reach 9-11 minutes for one battery cycle with the high performance brush motor and the high capacity Lipo battery . Comment on this product First name:   Topic:   E-mail:   Content:       message end--> Minimize

This is the latest 2.4Ghz Walkera Lama 400, the radio contr ... Read more

This is the latest 2.4Ghz Walkera Lama 400, the radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is very stable and easy to fly, you can learn how to fly it in just 1 day. Its overall length is about 650mm (25.6 in). The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. ?#60;object width="660" height="405"> 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome LCD Screen, Reliable Spread Spectrum Mixer/Gyro ControlStable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship New flashing LED head and tail lights 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment High performance 2 x 380PF motor, powered by 11.1V 1500mAh Lipo, offers up to 15 minutes flight time SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Weight Saving Spread Spectrum 4-in-1 Mixer/Gyro/Receiver Board Reliable high quality mixer with built-in gyro board Suitable for Indoor/Backyard/Park flying Digital Proportional Motor Speed Control The main rotor blades are using top quality plastic materials, which is not easily break Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner and Advanced hobbyist This helicopter is an ideal investment for those people looking to move onto the larger scale helicopters, and can give you excellent training in preparation to fly the big birds!! Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)   Main Rotor Diameter: 497mm (19.6 inch) Length: 650mm (25.6 inch) Flying Weight: 580g (20.5 oz) Driven system: 2* 380PF carbon brushed motors Servo: 2x 8.4g micro servos (speed 0.12sec/60o(4.8V);torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm) Battery: 11.1V 1500mAh Li-polymer Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2401 and 4-in-1 Receiver RX-2413 Radio Control Range: 3300 feet (1000m)   Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter. Wall Battery Balance Charger LCD Screen 11.1V 1500mAh Li-Polymer Rechargeable Battery English Manual Minimize