> Toys > Vehicles and Raceways > Raidentech.com

50cc-85cc Sukhoi SU-26 Wing Span: 87.5" Flying Weight: 17.0 ... Read more

50cc-85cc Sukhoi SU-26 Wing Span: 87.5" Flying Weight: 17.0 lbs Fuselage Length: 76.5" Wing Area 1333.8 sq. in. Engine Required: DA50-DA85 Minimize

The most popular 1/10 4 wheel drive monster truck in the wo ... Read more

The most popular 1/10 4 wheel drive monster truck in the world just got better! At each evolutionary step, the Infinitive has been improved upon to keep it at the peak of the RC monster truck field. So how do you make an Infinitive better? Extra speed, extra adjustability, extra toughness! The new Infinitive is packed with features that have been suggested by Infinitive owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Infinitive ever. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The heart of the Infinitive truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque.   RTR ¨C factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection 8 long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling. The Infinitive will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times The high quality AM transmitter and receiver work together to let you precisely control your car.   Length: 400 MM 15.7 inch. Width: 319 MM 12.2 inch. Height: 185 MM 7.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 30 MM 1.18 inch. Diameter Of Wheel: 120*26 MM   Weight: 1780g   Engine: 18 CXP Minimize

Walkera 4#3Q 2.4GHz Helicopter RTF Walkera HM 4#3Q 2.4G Met ... Read more

Walkera 4#3Q 2.4GHz Helicopter RTF Walkera HM 4#3Q 2.4G Metal Edition is a new generation palm size helicopter equipped with scale canopy, 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4#3Q offers more stable, silence and smoother flight. It is not a 2-channles toy. It is a serious rc helicopter for players from intermediate to experts. You can control it moving up and down, forward and backward, left and right and rotation. It is a serious hobby, not a toy. 2.4GHz is the standard of new generation radio system. It offers longer transmission distance, less interference, more stable radio transmission and less legal issue. For traditional radio frequency, helicopters in same frequency cannot fly together because of interference. With 2.4GHz radio system, many helicopters can fly at the same time without interference Specification Tail Rotor Dia.: 58 mm Main Rotor Dia.: 204 mm Overall Length: 207 mm Drive Motor: 1220 (Strong magnet) Tail Motor: N51 (Strong magnet) Battery: 3.7V 400mAh Li-Po Receiver: RX-2415 Transmitter: WK-2401 Gyro: Built-in All-up Weight: 50-51.8g (Battery included) Features Simplified 90?swash plate with highly emulational shape with the-state-of-the-art workmanship. New 2.4G technology with the functions of automatic identification, precise code pairing and strong anti-jamming. 4#3Q, equipped with stroke servo, features light weight, easy operation, prompt response and fine travel control. High performance 1220 motor powered by 3.7V 400mAh Lipo offers 8- to 10-minute flight time, depending on your flight mode.   Minimize

This beautifully built, high-quality Pitts Special Nitro Bi ... Read more

This beautifully built, high-quality Pitts Special Nitro BiPe presented by NitroModels is ideal for intermediate and advanced flyers, to perform breath-taking aerobatics. Turn your smoke system on and go from a tail-slide to flat spin. This is a spectacular scene that you won’t forget. The best quality Pitts Special to be offered in ARF form at the lowest price! This quality NitroModels BiPlane Aircraft ARF is a lightweight, 40 size engine offering that puts you behind the sticks of the famous "Challenger". This is one ARF that will stand out at the flightline, and just wait til you see it fly! Features: Laser-cut balsa and ply construction Built-up fuselage One piece built-up bolt-on wings Fiber glass cowl and wheel pants Landing gear Pre-drilled hinge pin holes and more. Kit includes: Hardware pack—bolts, nuts, lock nuts, flying wire, pin hinges Durable, lightweight landing wheels Quality vinyl decal set included Plane Specs: Wing span: 42.5 in / 1080 mm Wing area: 569 sq in / 36.7 sq dm Flying weight: 5.8 lbs / 2650 g Fuselage length: 40 in / 1020 mm User Requirements: Engine Required: 4c 0.52 cu in Radio Required: 4 channels, 5servos Minimize

NEW!! Walkera HM V200D02 2.4G Flybarless Metal Edition 4ch ... Read more

NEW!! Walkera HM V200D02 2.4G Flybarless Metal Edition 4ch Micro Helicopter RTF Pack (for Intermediate) with New WK-2403 Transmitter! With the new 2440V controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! This is the latest 2.4Ghz Walkera HMV200D02 Flybarless Brushless Micro helicopter, come in Ready-To-Fly package with all the necessary items inside. The 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. 3Compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly. New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. The flying time can reach 9minutes-11minutes for one battery cycle with the high performance brush motor and the high capacity LiPo battery. Specification Main Motor: 370SH motor Tail Motor: 1225FC35 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 94 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Receiver:  RX2440V Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Walkera HM V200D02 Flybarless Metal Brushless Helicopter Body 1 x Walkera Transmitter WK-2403 4CH 2.4G New! 1 x  1000mAh Battery (7.4V Li-polymer) 1 x Universal Charger Quick Start Guide and Manual in English Gift box Extra! 1 Pair of Spare Main Blades Minimize

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Meta ... Read more

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Metal Edition 4 CH Helicopter RTF w/ LCD Digital Transmitter The Flybarless Version Exceed RC Helicopter comes with the new digital LCD transmitter controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! Micro shaft transmission RC Helicopter with ALL DIRECTIONS CONTROL! It is Small and Stable, with excellent Tail Locking! This is the latest 2.4Ghz Exceed RC Classima 300 Flybarless Brushless helicopter, come in Ready-To-Fly package with all the necessary items inside. It's using shaft transmission and the 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-axis gyro control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. Specification Brushless Motor: Exceed RC-21-003 Brushless Speed Controller: Exceed RC-20A-1 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 121 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Exceed RC Classima 300 Flybarless Metal Brushless Helicopter Body 1 x Exceed RC Transmitter 4ch 2.4G Digital LCD 1 x 1000mAh Battery (7.4V Li-polymer) 1 x Battery Charger Manual in English Extra! 1 Pair of Spare Main Blades Extra! Spare Gear Set   Minimize

Dynam Super Cub PA-18 The new Dynam Super Cub PA-18 is read ... Read more

Dynam Super Cub PA-18 The new Dynam Super Cub PA-18 is ready to fly (RTF) with all electronics pre-installed. Users of all levels can fly this plane, even in windy conditions. It’s light-weight, strong, and crash resistant so that you can fly with a peace of mind. This plane comes with a powerful brushless direct drive motor system for smooth airflow, stability, and ease of flight. You can even steer the rear wheel for greater control on the ground!   Perfect for all levels: Beginners, Middle-level users, or Experienced Pilots RTF: Ready to Fly right out of the box (Everything included and 90% assembled) Easy to construct with pre-installed electronics (motors, servos and speed controllers) Beautiful design and great details: Resembles a real plane Factory-finished with stunning appearances 3D Aerobatic Performance Construction: Lightweight, strong, and crash resistant Easy take off: effortlessly depart from the ground or your hand Powerful Brushless Outrunner High Torque Motor (1250kv) Sensor-less 25amp Speed Control Strong wing designed for smooth airflow providing exceptional stability, and great ease to control and fly even in wind conditions Full function 4 Channel Futaba compatible transmitter with mixing: Aileron control, Elevator control, Rudder, and Throttle. Durable pre-colored foam fuselage, wings, and tail Battery: High Quality Rechargeable 11.1V 1250mah Li-Polymer Battery for 20 minutes flight time (Upgradeable optional battery for even longer flight time). 90 Minutes auto peak detection charger Specifications Wing Span: 42.1in/1070mm Overall Length: 28in/710mm Fly Weight: 530g Wing Area: 17.1dm² Fuselage Length: 630mm Drive System: Brushless Outrunner Motor (1750kv) Servo: 3X 9g High Speed Micro Servos Speed Controller: 25A Brushless ESC Battery: 11.1V 1250mAh Li-Polymer Control system: 4 CH Multi-functional FM Radio Transmitter and 6 CH Micro Receiver Radio Control Range: 3000 Feet (1000m)   Package Contents Dynam Super Cub PA-18 4CH RC Remote Control Plane Brushless Motor ESC LiPo RTF 4CH Transmitter (Left Hand Throttle – Mode II, 72MHz) Receiver, Brushless and ESC 110V-240V Power Adapter LiPo Battery Balance Charger 11.1V 1250mAh Li-Po Rechargeable Battery 2 Propellers and Landing Gear English User Manual Minimize

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Meta ... Read more

NEW!! Exceed RC Classima 300 2.4G Flybarless BRUSHLESS Metal Edition 4 CH Helicopter RTF w/ LCD Digital Transmitter The Flybarless Version Exceed RC Helicopter comes with the new digital LCD transmitter controller, the 3 Axis Gyro System controls the balance in the 3 direction of elevation, rudder and aileron, and features automatic amending the flight status. It is the optimal mode for beginner! Micro shaft transmission RC Helicopter with ALL DIRECTIONS CONTROL! It is Small and Stable, with excellent Tail Locking! This is the latest 2.4Ghz Exceed RC Classima 300 Flybarless Brushless helicopter, come in Ready-To-Fly package with all the necessary items inside. It's using shaft transmission and the 3 Axis Gyro System ensure stable fly. Its overall length is 432mm. The new flybarless structure consume less power and let you have a longer flight time. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Features The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-axis gyro control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. Specification Brushless Motor: Exceed RC-21-003 Brushless Speed Controller: Exceed RC-20A-1 All-up Weight: 268g (Battery included) Tail Rotor Diameter: 121 mm Main Rotor Diameter: 440 mm Overall Length: 432 mm Gyro: Three Axis Battery: 7.4V 1000mAh Li-Po Package includes: 1 x Exceed RC Classima 300 Flybarless Metal Brushless Helicopter Body 1 x Exceed RC Transmitter 4ch 2.4G Digital LCD 1 x 1000mAh Battery (7.4V Li-polymer) 1 x Battery Charger Manual in English Extra! 1 Pair of Spare Main Blades Extra! Spare Gear Set Minimize

New Cananair CL-415 Twin 0.52 Engine - 80.7" Nitro-Powered ... Read more

New Cananair CL-415 Twin 0.52 Engine - 80.7" Nitro-Powered Radio Controlled Seaplane!!! Hot Features: Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications: Wing span: 2050 mm / 80.7 in Fuselage length: 1476 mm / 58 in Flying weight: 4540 g /10 lbs Wing area : 976.5 sq in / 63.4 sq.dm Additional Requirements: Engine Required:2c 0.52x2pcs Radio Required: 6channels ; 9 Servos Minimize

The Exceed-RC is reinventing the buggies to a whole new lev ... Read more

The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 2.4Ghz Transmitter Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual Minimize

The fabulous Extra-330s 90 ARF is pre decorated with an eye ... Read more

The fabulous Extra-330s 90 ARF is pre decorated with an eye catching color scheme. All built-up construction with quality balsa wood which results in a light but strong model. Nicely painted fiberglass cowl and spats. Including with the kit, there are a complete hardware pack and full color decals. You will enjoy flying this model with great delights. Wingspan 65 inch Length 56 inch Weight 3.8~3.9 kg Wing Loading 76~78 dm/2 Airfoil Naca 0014 Wing Area 50 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 90 purchase separately 4 Strok Engine 91~120 purchase separately Minimize

The 50CC Yak ARF from NitroModels is a high performance aer ... Read more

The 50CC Yak ARF from NitroModels is a high performance aerobatic airplane, capable of both precision and 3-D maneuvers.  The aircraft builds easily, quickly and precisely due to our state of the art CAD design with Laser cutting technology, and outstanding craftsmanship.  The 50CC Yak ARF is designed for gas engines in the 50cc category.  It is built with the highest quality balsa/plywood and is pre-covered. Fuselage length: 2060mm / 81 in Flying weight: 8000g Wing Span: 2160mm / 85in Engine : Gas Engine: 45cc - 50cc Engine Required: Gas Engine: 45cc - 50cc Minimize

The most popular 1/10 4 wheel drive monster truck in the wo ... Read more

The most popular 1/10 4 wheel drive monster truck in the world just got better! At each evolutionary step, the Infinitive has been improved upon to keep it at the peak of the RC monster truck field. So how do you make an Infinitive better? Extra speed, extra adjustability, extra toughness! The new Infinitive is packed with features that have been suggested by Infinitive owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Infinitive ever. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The heart of the Infinitive truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque.   RTR ¨C factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection 8 long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling. The Infinitive will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times The high quality AM transmitter and receiver work together to let you precisely control your car.   Length: 400 MM 15.7 inch. Width: 319 MM 12.2 inch. Height: 185 MM 7.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 30 MM 1.18 inch. Diameter Of Wheel: 120*26 MM   Weight: 1780g   Engine: 18 CXP Minimize

  Specification: 1. Type: RTF Electric 3D Heli 2. Transmitt ... Read more

  Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter:6CH RTF 2.4Ghz 3. Length: 420mm 4. Height: 161mm 5. Main Rotor Diameter: 438mm 6. Tail Rotor Diameter: 105mm 7. Gyro: GY192 Head Lock Gyro 8. Battery: 7.4V 850MAH 15C li-polymer 9. Motor: Brushless 4800KV 10. Servo: 7g*4pcs Features: 1.Simplify, compact and high-rigidity frame. let all electric system install easy and nice looking. 2.Use Direct-belt-drive, save power and let helicopter very quiet. 3.Simple, separate servos-frame, let flyer easy install and repair. 4.In main frame, use 3pcs belling, insure to the main shaft concentric and less shake. 5.High-precision tail double-push frame, more smooth and wearable. 6.The separate main gear let flyer install and repair more easy and fast.   Minimize

This is the latest 2.4Ghz Walkera Lama 400, the radio contr ... Read more

This is the latest 2.4Ghz Walkera Lama 400, the radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is very stable and easy to fly, you can learn how to fly it in just 1 day. Its overall length is about 650mm (25.6 in). The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4 GHz Spread Spectrum Transmitter, Awesome LCD Screen, Reliable Spread Spectrum Mixer/Gyro ControlStable Flight, Even First Timer can Control Easily New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship New flashing LED head and tail lights 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment High performance 2 x 380PF motor, powered by 11.1V 1500mAh Lipo, offers up to 15 minutes flight time SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Weight Saving Spread Spectrum 4-in-1 Mixer/Gyro/Receiver Board Reliable high quality mixer with built-in gyro board Suitable for Indoor/Backyard/Park flying Digital Proportional Motor Speed Control The main rotor blades are using top quality plastic materials, which is not easily break Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner and Advanced hobbyist This helicopter is an ideal investment for those people looking to move onto the larger scale helicopters, and can give you excellent training in preparation to fly the big birds!! Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)   Main Rotor Diameter: 497mm (19.6 inch) Length: 650mm (25.6 inch) Flying Weight: 580g (20.5 oz) Driven system: 2* 380PF carbon brushed motors Servo: 2x 8.4g micro servos (speed 0.12sec/60o(4.8V);torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm) Battery: 11.1V 1500mAh Li-polymer Control system: 4CH Multifunctional 2.4 GHz Transmitter WK-2401 and 4-in-1 Receiver RX-2413 Radio Control Range: 3300 feet (1000m)   Helicopter (100% Assembled) 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C Transmitter w/ Training Switch, Simulator Port Wall Battery Balance Charger LCD Screen 11.1V 1500mAh Li-Polymer Rechargeable Battery English Manual Minimize

The heart of the Rally Monster Nitro truck line has always ... Read more

The heart of the Rally Monster Nitro truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. FEATURE HIGHLIGHTS: RTR 100% factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Oil filled shocks with firm tuned springs keep the wheels on the ground   Complete set of ball bearings for low friction and durability The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling.   2-Speed transmission for fast acceleration and insane top end speed High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times   The Rally Monster  will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control The Rally Monster will handle all of your off-road RC car ventures. Funnel clouds reported forming from these high performance off road buggies! The high quality 2.4ghz transmitter and receiver work together to let you precisely control your car. SPECIFICATIONS: Length: 400 MM 15.7 inch. Width: 250 MM 9.8 inch. Height: 160 MM 6.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 26 MM 1.02 inch. Diameter Of Wheel: 86*32 MM (F) 86*40 MM (R)   Weight: 1780g   Engine: 18 CXP 51C819 1/10 Scale Exceed RC Rally Monster GP Upgrades Product Reviews for 1/10 2.4Ghz Exceed RC Rally Monster Nitro Gas Powered RTR Off Road Rally Car 4WD Truck Stripe Blue Minimize

The new generation of 1/8 Buggy are here with much newly ad ... Read more

The new generation of 1/8 Buggy are here with much newly added features and functions. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive 1/8 MadFire Buggy comes with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 125cc. The impressiveness of the MadFire can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadFire are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don’t have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadFire to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadFire will lead the way to new standards for the RC world and conquer all. The 4WD Engine-powered Monster Buggy MadFire will Push your Imagination into overdrive! FX-2 Sport Radio& Engine 21 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 4.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 1-Speed Transmission Heavy Duty Metal Gear Steering Servo 125cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks      Radio Transmitter: 2 Channel AM 27MHz Aluminum Muffler Powerful .21 Nitro Engine Built-In Innovative Servo Power Saving Concept Aluminum Rear Shocks   Aluminum Rear Plate Full Metal Gear Front CVD Drive Shaft Makes Smooth Turns and Prevent Dust   Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Length: 17.12 Inches Width:  12.20 Inches Height:  7.48  Inches Gear Ratio: 1:10.9 Full Sealed Ball Bearing Set All Assembled with Radio Control and Ready to Run Over the Competition!   Minimize

German Panther 1/16 Scale Radio Remote Control Air Soft BB ... Read more

German Panther 1/16 Scale Radio Remote Control Air Soft BB Bullet Battle RC Tank( Upgrade Version w/ Metal Gear & Tracks ) This tank can move forward, accelerating speed forward, backward, accelerating speed backward, rotating, barrel can be raised 30 degree. Turret can turn 320 degree. Six groups of automotive demonstration function and auto-programming function. This is a 1/16 scale fully painted and assembled replica t ank with the long gun barrel featuring radio-controlled of all movement including turret rotation and gun elevation. It features full suspension and a main gun that fires BB pellets up to 25 meters! Excellent value for money and a big improvement on the previous version. A great introduction to large scale radio controlled tanks. Key Specifications/Special Features: Features: Maximum side turning angel of turret (left/right) approximately 320-degree Maximum vertical turning angel of gun (up/down) approximately 30-degree Maximum climbing gradient (changeable on different road surfaces) approximately 35-degree Product size: 54.5 x 23.5 x 27.5cm Function: forward high-speed forward, backward, high-speed backward and spin   The barrel moves up and down 30. the turret turns 320 emulation music and action effect Full scale R/C function, frequency-free to change for any frequencies as you like, Multi-players and tanks are allowed Realistic functions, supper chassis, Realistic suspension system The model comes with a dedicated control transmitter unit with its own on/off switch and an 'On' indicator light. The transmitter requires 8 AA alkaline batteries (not included). Interchangeable crystals allow more than one tanks to be operated at the same time This tank actually shoots 6mm plastic BBs from a fully automatic motorized firing system using self-generated compressed air. These can hit a target up to 25m away. The tank can fire while on the move or stationary and can hold up to 40 BBs in the turret. A box of pellets is included to get you started. The turret is able to turn left and right to almost a complete circle (320 degrees). Push the left joy stock left or right to rotate the turret. The BB gun can be fired at the same time while the tank is moving. The gun can move up and down at the same time as the turret is turning. The barrel has an approximately 20 degree tilt up & down. Push the left joy stock down to move the gun up & down. Independent suspension and proportional speeds allow it to climb gradient of 35 degrees and overcome most terrains and minor obstacles. The right joy stock is used to control all movement including forward, backward, left turn, right turn, left spin, right spin, backward left turn and backward right turn. The two trim levers for the right joy stick can be used to fine tune the joy stick This tank comes with a 7.2V Ni-Cad rechargeable battery and charger. Oversea customers will need a converter/transformer. The charger need about 7 to 8 hours for a full charge. Running time per full charge can be as long as 30 minutes depending on pattern of play. Minimize

The Latest Spec Baja Buggy!   When the designers at HPI rel ... Read more

The Latest Spec Baja Buggy!   When the designers at HPI released the original Baja buggy to the public, we didn't realize the absolute storm of popularity it would enjoy. Racers everywhere loved it, reviews from all over the world absolutly glowed with enthusiasm, shops ran out of stock and brand new companies sprung up to make wild hop-ups for this one-of-a-kind machine. We had just as much fun tracking all the praise as we did for the Savage monster truck! Most encouraging of all, though, we heard back from customers everywhere about how much they enjoy their Baja, which is the best thing we could possibly expect. After all that, you'll understand that when it comes to updating such a legendary car, you can't mess with the magic too much: we wanted to give our fans more of the same, without going overboard. It was a tricky subject, but we're sure we got it right on the money.   The HPI Baja: the original, and still the best!   The Baja 5B 2.0 gives you more speed, better acceleration, improved handling and THREE fantastic new looks! The awesome gray-anodized look of the Baja 5T truck comes to the buggy, with all of the main aluminum parts now anodized a cool, sleek gunmetal colour. The body is now available in three fantastic new designs: bright red, cool blue and subdued gray.         New Standard Parts   The Baja 5B 2.0 has several great new features and standard parts, many of them taken right off the kit-only SS version and the Baja 5T truck! Check out all the fantastic updates!   New Bodyshell Colours The tough bodyshell is now available in three all-new paint schemes: subdued gray, hot red and cool blue! These are pre-painted, pre-trimmed bodies that are ready to go right out of the box: no prep work needed! With their 2mm thick polycarbonate moulded construction they will last for a very long time!   Revised 23cc Engine The new engine fitted in the Baja 5B 2.0 features an updated cylinder that provides 10% extra power! When combined with the High Flow Muffler and 8000 RPM clutch, you'll experience much faster top speeds, better acceleration and more power overall!   High Flow Muffler The High Flow Muffler from the Baja 5T is a much larger capacity design than the old standard muffler, and is tuned to give you more horsepower on the track. It sounds fantastic, too! When the Baja 5B 2.0 is ripping past the pits, you will know it!     8000 RPM Clutch Formerly an option part, the high performance 8000 RPM Clutch from the Baja SS and 5T is used to give you more punch off the line. Lightweight clutch shoes and a strong heavy-duty spring are the integral parts of this unit, and you will feel the power out of the turns.   VVC/HD Shock Absorbers These are the same damper units that equip the Baja SS and Baja 5T, and are now standard parts for the 5B 2.0 - these are oil-filled, externally adjustable coilover shocks for fantastic performance and heavy-duty action! Thick shock shafts provide security from crashes, threaded shock bodies allow instant ride height changes, and the externally adjustable design is tailor-made for trackside tuning.   Torx T27 Engine Screws The engine now features tough Torx T27 screws to make maintenance and rebuilds less of a chore. Torx screws are easier to work with and provide less wear and tear on tools and screws, making them the ideal screw option for a Baja buggy engine!   Gunmetal Anodizing The v2.0 update includes a total reworking of all the aluminum parts of the Baja buggy, from the chassis to the spring adjust collars! The very cool gunmetal look gives the Baja 5B 2.0 the 'race' look, and it's easy to add a bit of bling with Baja SS or original 5B colour parts.   Great New Look Topping off the gunmetal monocoque chassis are the new pre-painted bodyshells provided with the Baja 5B 2.0 - choose from three new main colours: a racy red, awesome blue or stealthy gray! Each design is totally new and unique, and would cost you a fortune if you were to get it custom-painted on a c Minimize

The most popular 1/10 4 wheel drive monster truck in the wo ... Read more

The most popular 1/10 4 wheel drive monster truck in the world just got better! At each evolutionary step, the Infinitive has been improved upon to keep it at the peak of the RC monster truck field. So how do you make an Infinitive better? Extra speed, extra adjustability, extra toughness! The new Infinitive is packed with features that have been suggested by Infinitive owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Infinitive ever. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The heart of the Infinitive truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque.   RTR ¨C factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection 8 long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling. The Infinitive will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times The high quality AM transmitter and receiver work together to let you precisely control your car.   Length: 400 MM 15.7 inch. Width: 319 MM 12.2 inch. Height: 185 MM 7.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 30 MM 1.18 inch. Diameter Of Wheel: 120*26 MM   Weight: 1780g   Engine: 18 CXP Minimize

1:16 RC German Panther Tank with Engine Sound and Machine G ... Read more

1:16 RC German Panther Tank with Engine Sound and Machine Gun Sound ( Upgrade Version w/ Metal Gear & Tracks ) This tank can move forward, accelerating speed forward, backward, accelerating speed backward, rotating, barrel can be raised 30 degree. Turret can turn 320 degree. Six groups of automotive demonstration function and auto-programming function. This is a 1/16 scale fully painted and assembled replica of the German Panther Tank with the long gun barrel featuring radio-controlled of all movement including turret rotation and gun elevation. It features full suspension and a main gun that fires BB pellets up to 25 meters! Excellent value for money and a big improvement on the previous version. A great introduction to large scale radio controlled tanks. Key Specifications/Special Features: Features: Maximum side turning angel of turret (left/right) approximately 320-degree Maximum vertical turning angel of gun (up/down) approximately 30-degree Maximum climbing gradient (changeable on different road surfaces) approximately 35-degree Product size: 54.5 x 23.5 x 27.5cm Function: forward high-speed forward, backward, high-speed backward and spin The barrel moves up and down 30. the turret turns 320 emulation music and action effect Full scale R/C function, frequency-free to change for any frequencies as you like, Multi-players and tanks are allowed Realistic functions, supper chassis, Realistic suspension system Full scale R/C function simulative motor start-up sound Engine sound, machine-gun sound Cannonball sound Emulation action effect The model comes with a dedicated control transmitter unit with its own on/off switch and an 'On' indicator light. The transmitter requires 8 AA alkaline batteries (not included). Interchangeable crystals allow more than one tanks to be operated at the same time This tank actually shoots 6mm plastic BBs from a fully automatic motorized firing system using self-generated compressed air. These can hit a target up to 25m away. The tank can fire while on the move or stationary and can hold up to 40 BBs in the turret. A box of pellets is included to get you started. The turret is able to turn left and right to almost a complete circle (320 degrees). Push the left joy stock left or right to rotate the turret. The BB gun can be fired at the same time while the tank is moving. The gun can move up and down at the same time as the turret is turning. The barrel has an approximately 20 degree tilt up & down. Push the left joy stock down to move the gun up & down. Independent suspension and proportional speeds allow it to climb gradient of 35 degrees and overcome most terrains and minor obstacles. The right joy stock is used to control all movement including forward, backward, left turn, right turn, left spin, right spin, backward left turn and backward right turn.The two trim levers for the right joy stick can be used to fine tune the joy stick This tank comes with a 7.2V Ni-Cad rechargeable battery and charger. Oversea customers will need a converter/transformer. The charger need about 7 to 8 hours for a full charge. Running time per full charge can be as long as 30 minutes depending on pattern of play. Minimize

The heart of the Rally Monster Nitro truck line has always ... Read more

The heart of the Rally Monster Nitro truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. FEATURE HIGHLIGHTS: RTR 100% factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Oil filled shocks with firm tuned springs keep the wheels on the ground   Complete set of ball bearings for low friction and durability The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling.   2-Speed transmission for fast acceleration and insane top end speed High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times   The Rally Monster  will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control The Rally Monster will handle all of your off-road RC car ventures. Funnel clouds reported forming from these high performance off road buggies! The high quality 2.4ghz transmitter and receiver work together to let you precisely control your car. SPECIFICATIONS: Length: 400 MM 15.7 inch. Width: 250 MM 9.8 inch. Height: 160 MM 6.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 26 MM 1.02 inch. Diameter Of Wheel: 86*32 MM (F) 86*40 MM (R)   Weight: 1780g   Engine: 18 CXP 51C819 1/10 Scale Exceed RC Rally Monster GP Upgrades Product Reviews for 1/10 2.4Ghz Exceed RC Rally Monster Nitro Gas Powered RTR Off Road Rally Car 4WD Truck Carbon Blue Minimize

The Exceed-RC is reinventing the trucks to a whole new leve ... Read more

The Exceed-RC is reinventing the trucks to a whole new level, a compact much smaller version of the popular 1/10Th scale Infinity. The New 2.4Ghz Exceed-RC 1/16Th Scale Thunder Fire Nitro Gas Truck is the newest off road mini truck model full scale. The Thunder Fire is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this Thunder Fire to speeds over 45mph. The Excced-RC Thunder Fire is one of a kind and with the mini scale always fascinates hobby operators these days. Large capacity fuel tank allows for endurance racing with built-in baffle prevents sloshing. Built-in fuel line filter, keeps impurities, away from the engine and its components. Individual Metal Disc brakes and sport brake pads allow for smooth and abrupt braking power Wide ratio 1-speed transmission allows the Thunder Fire to take advantage of the 7 CXP engine. High performance oil filed shock and long suspension arms provide a stable ride, even over the roughest ground. Tough Aluminum Chassis keeps the Thunder Fire components where they belong, firmly installed Performance Air Filter provides the airflow necessary to power the massive 7 CXP engine Responsive 4WD is powered by high tensile strength metal drive shafts 2.4Ghz Transmitter Remote Control Bring the Truck with no interference and longer range. Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 9.84in (250mm) Width: 8.07 in (205mm) Height: 3.46 in (88mm) Ground Clearance: .78 in (20mm) Drive type: 4WD Wheelbase: 6.85 in (174mm) Diameter of Wheel: 2.95 x 1.41 in (75 X 36 mm) Engine:  7CXP Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body 7 CXP Engine 2.4Ghz Sport Radio Control Transmitter System with high speed servos Instruction Manual Minimize

The most popular 1/10 4 wheel drive 2 speed off-road buggy ... Read more

The most popular 1/10 4 wheel drive 2 speed off-road buggy in the world just got better! At each evolutionary step, the Forza has been improved upon to keep it at the peak of the RC off-road buggy field. So how do you make an Forza better? Extra speed, extra adjustability, extra toughness! The new Forza is packed with features that have been suggested by Forza owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Forza ever. The heart of the Forza truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. FEATURE HIGHLIGHTS: RTR 100% factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability   New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Oil filled shocks with firm tuned springs keep the wheels on the ground   Complete set of ball bearings for low friction and durability The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling.   2-Speed transmission for fast acceleration and insane top end speed High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times   The Forza will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control The Forza will handle all of your off-road RC car ventures. Funnel clouds reported forming from these high performance off road buggies! The high quality AM transmitter and receiver work together to let you precisely control your car. SPECIFICATIONS: Length: 400 MM 15.7 inch. Width: 250 MM 9.8 inch. Height: 160 MM 6.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 26 MM 1.02 inch. Diameter Of Wheel: 86*32 MM (F) 86*40 MM (R)   Weight: 1780g   Engine: 18 CXP Minimize

The CMPro Katana 50 ARF is of balsa wood construction to en ... Read more

The CMPro Katana 50 ARF is of balsa wood construction to ensure maximum performance. Very agile and impressively colored it causes heads to turn. The plane performs smooth and accurate flying that beyond your expectations.   Wingspan 1350mm Length 1270mm Weight 2.75~2.85 kg Wing Loading 91~95 dm/2 Airfoil Naca 0014 Wing Area 30 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 46~50 purchase separately 4 Strok Engine 52~63 purchase separately Construction is built-up balsa except for the fiberglass cowl and spats. Full color decal sheet is included. The bottom color design is too eye-catching that you will never lose this plane from you sight. A plastic cockpit and clear PVC canopy are included. Minimize

New Page 1 **THE GAS CAR IS BRAND NEW** Exceed RC 1/10 Nitr ... Read more

New Page 1 **THE GAS CAR IS BRAND NEW** Exceed RC 1/10 Nitro Competition Racing Remote Control Car, Complete Kit with Body & Engine along with an 2-Channel Pistol Wheel Remote Control w/ 2 SERVOS !!! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The Car Contains all available hop-up parts; body or engine included!!! Designed to compete in national and local competitions, manufactured at a super-modern facility, Exceed RC's nitro r/c gas cars are created with a mind for high performance racing, scale speed of 55mph+. This 4-Wheel-Driven Gas Powered Car is a 1/10th scale that combines many sophisticated performance-enhancing features that represent a culmination of the long years of Exceed RC's design experience. Engine  Beginner Version, VX 16 Engine,AM Radio, 3 kg steering servo Engine  VX 16 Engine Manufacturer  Vertex Transmission  Single speed  Drive System  Four Wheel Drive Radio System  Two Channel A.M. Length  400mm Front Track  215mm Rear Track  205mm Overall Height 170mm Wheelbase  270mm Front Shock Length  85mm Rear Shock Length  85mm Front Tires  Block Tread Rear Tires  Block Tread Wheel Width  32mm (F) - 40mm (R) Wheel Diameter  86mm Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Steel Disc Fuel Tank Capacity  75cc Suspension Type  Plastic bodied oil filled shocks Gear Ratio 1:8.038 (Single Speed) Other   OUR CAR HAS PART COMPATIBILITY & MODIFICATIONS WITH OTHER BRANDS LIKE HPI, TRAXX, ETC.  YOU CAN CHANGE THE BODY-KIT INTO LIKE LEXUS, BMW, MERCEDES, ETC.  YOU CAN ALSO MODIFY/UPGRADE THE ENGINE.  ADD NEW TIRES, NEW SUSPENSION, RE-PAINT,+ MORE!!! THIS IS A GREAT KIT FOR ANY AGE, ANYONE !!! Product Description: - 2-Channel Pistol Radio System Included - Assembled Chassis - VX16 High-Torque and Pull Start Engine with Carburetor - Equipped with Tuned Pipe and Air Filter - Front and rear Bevel Gear differentials - 4 wheel Shaft-Drive System. - Adjustable Wishbone Suspension - No-flex chassis design for better performance. - Alloy aluminum upper plate and chassis. - Oil-Filled shock absorber. - Disc-shaped brake system. - Front universal joint shaft. - 75 cc fuel pressure tank. - High impact wheels. - High traction radial tires. - Servo saver linkage system. - Stock engine muffler system. PACKAGE INCLUDE: - 1 x BRAND NEW 15CX ENGINE - 1 x PAINTED BODY CHASSIS - 2.4Ghz GUN-STYLE REMOTE CONTROL Minimize

****************NOTE*************** Engine, servos, transmi ... Read more

****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately!  This is an airplane kit only, no electronics!  Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada. Minimize

The MD500 Hughes is a 4 channels radio controlled electric ... Read more

The MD500 Hughes is a 4 channels radio controlled electric helicopter with co-axial, twin rotor blades system. It is easy to fly for the beginner, which possesses the characteristics of high sensitivity and full control of the real helicopter. The MD500 Hughes has been designed with an finely-crafted authentic scale appearance with highly detailed fuselage. Finally, 2.4 Gigahertz equipment use less current to operate than standard frequency systems. This results in longer flight time and longer life of your transmitter and receiver batteries! This helicopter is one of the largest dual-rotor in the market. This helicopter also has an option to install a wireless camera (not included) for live viewing on your PC monitor or TV!!! Furthermore, because of the Twin-Rotor-Coaxial-Twin-Rotor design, the helicopter has extreme stability in taking steady videos & pictures. The MD500 Hughes is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course . The MD500 Hughes has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other’s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the Eagle Eye turning in the direction opposite to the rotation of the faster moving rotor. Since the MD500 Hughes is fixed pitch, collective control is governed exclusively by throttle. On the MD500 Hughes, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the MD500 Hughes stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying the MD500 Hughes out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the MD500 Hughes tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. Optional Li- poly battery will help to achieve better performance and longer flight time. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time Option to install a wireless camera (not included) for live viewing on your PC monitor or TV!!! Largest dual rotor helicopter in the market Work best for Indoor & Outdoor Driven by 2X powerful 370 carbon brush motors SUPER STABLE X-ROTATION SYSTEM, Easy to control Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts for easy set up Scale appearance Factory Pre- assembled, zero assembly time Suitable for Indoor/Outdoor/Backyard/Park Powered by 1000mAh Li-polymer battery. Longer flight time. The main rotor blades are using top quality plastic materials, which is not easily break Digital Proportional Motor Minimize

1:16 RC US M41A3 Bulldog Tank with Engine Sound and Machine ... Read more

1:16 RC US M41A3 Bulldog Tank with Engine Sound and Machine Gun Sound ( Upgrade Version w/ Metal Gear & Tracks ) This tank can move forward, accelerating speed forward, backward, accelerating speed backward, rotating, barrel can be raised 30 degree. Turret can turn 320 degree. Six groups of automotive demonstration function and auto-programming function. This is a 1/16 scale fully painted and assembled replica of the US M41A3 Bulldog Tank with the long gun barrel featuring radio-controlled of all movement including turret rotation and gun elevation. It features full suspension and a main gun that fires BB pellets up to 25 meters! Excellent value for money and a big improvement on the previous version. A great introduction to large scale radio controlled tanks. Key Specifications/Special Features: Features: Maximum side turning angel of turret (left/right) approximately 320-degree Maximum vertical turning angel of gun (up/down) approximately 30-degree Maximum climbing gradient (changeable on different road surfaces) approximately 35-degree Product size: 54.5 x 23.5 x 27.5cm Function: forward high-speed forward, backward, high-speed backward and spin The barrel moves up and down 30. the turret turns 320 emulation music and action effect Full scale R/C function Multi-players and tanks are allowed (must be different frequency) Realistic functions, supper chassis, Realistic suspension system Full scale R/C function simulative motor start-up sound Engine sound, machine-gun sound Cannonball sound Emulation action effect The model comes with a dedicated control transmitter unit with its own on/off switch and an 'On' indicator light. The transmitter requires 8 AA alkaline batteries (not included). Interchangeable crystals allow more than one tanks to be operated at the same time This tank actually shoots 6mm plastic BBs from a fully automatic motorized firing system using self-generated compressed air. These can hit a target up to 25m away. The tank can fire while on the move or stationary and can hold up to 40 BBs in the turret. A box of pellets is included to get you started. The turret is able to turn left and right to almost a complete circle (320 degrees). Push the left joy stock left or right to rotate the turret. The BB gun can be fired at the same time while the tank is moving. The gun can move up and down at the same time as the turret is turning. The barrel has an approximately 20 degree tilt up & down. Push the left joy stock down to move the gun up & down. Independent suspension and proportional speeds allow it to climb gradient of 35 degrees and overcome most terrains and minor obstacles. The right joy stock is used to control all movement including forward, backward, left turn, right turn, left spin, right spin, backward left turn and backward right turn.The two trim levers for the right joy stick can be used to fine tune the joy stick This tank comes with a 7.2V Ni-Cad rechargeable battery and charger. Oversea customers will need a converter/transformer. The charger need about 7 to 8 hours for a full charge. Running time per full charge can be as long as 30 minutes depending on pattern of play. Minimize