|
|
If you're looking for that one kit to wire your entire doll
... Read more
If you're looking for that one kit to wire your entire dollhouse, this is the answer! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. This high-powered kit contains everything included in the Large House Wiring Kit (#72103): 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS all of these additional items:Double quantity of brads eyelets and tape wireAn in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseAn extra 15' of tape wireTable or carriage lampEight wall outletsEight plugsA 40W transformer with built-in circuit breaker (vs. 20W)This kit will wire a 12 to 15-room dollhouse. A great buy- provides 15-20% savings over the purchase of these parts individually! To use the Cir-Kit outlets included in this kit, you must use Cir-Kit plugs. (Cir-Kit outlets are not compatible with Houseworks plugs.)
Minimize
|
|
Go To Store
|
|
|
|
The leading electrification kit in the industry today! The
... Read more
The leading electrification kit in the industry today! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. Contains everything needed to completely wire a 6-room (up to 16 bulbs) dollhouse, including:1/8" bradsSmall hollow eyelets15' roll conductive tape wireOne 10W plug-in transformer with built-in circuit breakerPilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 Includes illustrated installation instructions.
Minimize
|
|
Go To Store
|
|
|
|
This popular kit contains everything included in the Starte
... Read more
This popular kit contains everything included in the Starter Wiring Kit, #7101: 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS these added extras,Double quantity of brads, eyelets and tape wireA 20W transformer with built-in circuit breaker (instead of a 10W)An in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseThese added items will easily allow the wiring of a 10 to 12-room dollhouse.
Minimize
|
|
Go To Store
|
|
|
|
If you're looking for that one kit to wire your entire doll
... Read more
If you're looking for that one kit to wire your entire dollhouse, this is the answer! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. This high-powered kit contains everything included in the Large House Wiring Kit (#72103): 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS all of these additional items:Double quantity of brads eyelets and tape wireAn in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseAn extra 15' of tape wireTable or carriage lampEight wall outletsEight plugsA 40W transformer with built-in circuit breaker (vs. 20W)This kit will wire a 12 to 15-room dollhouse. A great buy- provides 15-20% savings over the purchase of these parts individually! To use the Cir-Kit outlets included in this kit, you must use Cir-Kit plugs. (Cir-Kit outlets are not compatible with Houseworks plugs.)
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
The heart of Cir-Kit Concepts' electrical system is its 2-c
... Read more
The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. This kit contains all of the parts necessary to tape wire a 5-6 room dollhouse. No soldering, special tools or electrical knowledge necessary. Instructions and wiring diagram included. Kit includes: 1/8" brass brads15' roll conductive tape wirePilot hole punch (with needles)Test probeJunction spliceTransformer lead-in wire (with switch) A transformer is required for this kit but is not included. You decide which transformer is most suitable for your wiring needs. Packaging may vary.
Minimize
|
|
Go To Store
|
|
|
|
This unit was originally designed for a 16-20 volt system.
... Read more
This unit was originally designed for a 16-20 volt system. It can be attached to 12V tape or round wire system, but the effect will be more like a blink than a flicker. This product does not require a separate transformer and comes with insulating foam sticker for easy installation.
Minimize
|
|
Go To Store
|
|
|
|
|
from $31
(2 stores)
See Details
|
|
|
|
|
from $26
(2 stores)
See Details
|
|
|
|
This popular kit contains everything included in the Starte
... Read more
This popular kit contains everything included in the Starter Wiring Kit, #7101: 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS these added extras,Double quantity of brads, eyelets and tape wireA 20W transformer with built-in circuit breaker (instead of a 10W)An in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseThese added items will easily allow the wiring of a 10 to 12-room dollhouse.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
With a built-in circuit breaker, this transformer is virtua
... Read more
With a built-in circuit breaker, this transformer is virtually burn-out proof! In the event of an overload, the breaker opens and removes voltage until the unit cools. Then the breaker resets itself and reapplies voltage to the output. The 12V/5W Transformer outputs AC current.500ma for up to 10 60ma bulbs1 15/16"W x 2 3/4"H x 1 9/16"D
Minimize
|
|
Go To Store
|
|
|
|
The heart of Cir-Kit Concepts' electrical system is its 2-c
... Read more
The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. This kit contains all of the parts necessary to tape wire a 5-6 room dollhouse. No soldering, special tools or electrical knowledge necessary. Instructions and wiring diagram included. Kit includes: 1/8" brass brads15' roll conductive tape wirePilot hole punch (with needles)Test probeJunction spliceTransformer lead-in wire (with switch) A transformer is required for this kit but is not included. You decide which transformer is most suitable for your wiring needs. Packaging may vary.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
A transformer to dollhouse electrical interconnection. May
... Read more
A transformer to dollhouse electrical interconnection. May be used with any screw-terminal type transformer. One end of the wire is equipped with a plug for connection to the junction splice (#2223) on the dollhouse and the other with spade lugs for connection to the transformer output terminals. Includes 2 amp fuse. Wire is approximately 6' long.
Minimize
|
|
Go To Store
|
|
|
|
Now you can individually control each of the 12 outlets in
... Read more
Now you can individually control each of the 12 outlets in this power strip with its own switch! It has a 1500 ma fuse and a 7' power cord. Attach it to a 12V transformer to handle up to 23 12V bulbs. Unit is 7 1/4" long.
Minimize
|
|
Go To Store
|
|
|
|
The leading electrification kit in the industry today! The
... Read more
The leading electrification kit in the industry today! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. Contains everything needed to completely wire a 6-room (up to 16 bulbs) dollhouse, including:1/8" bradsSmall hollow eyelets15' roll conductive tape wireOne 10W plug-in transformer with built-in circuit breakerPilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 Includes illustrated installation instructions.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
This transformer is a safe and convenient power source for
... Read more
This transformer is a safe and convenient power source for any dollhouse or miniature room! All Cir-Kit transformers are designed to plug directly into a powered outlet, thus eliminating the need of building a special transformer enclosure. Contains a built-in thermal circuit breaker, making them virtually burnout proof. In the event of an overload or short, the thermal breaker simply opens and removes voltage until the unit cools. After cooling, the breaker resets itself and automatically reapplies voltage to the output. The 12V/3W Plug-in Transformer outputs AC current. This transformer is adequate for up to 4 65 ma light bulbs. 1 15/16"W x 2 3/4"H x 1 9/16"D
Minimize
|
|
Go To Store
|
|
|
|
|
from $20
(2 stores)
See Details
|
