|
|
If you're looking for that one kit to wire your entire doll
... Read more
If you're looking for that one kit to wire your entire dollhouse, this is the answer! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. This high-powered kit contains everything included in the Large House Wiring Kit (#72103): 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS all of these additional items:Double quantity of brads eyelets and tape wireAn in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseAn extra 15' of tape wireTable or carriage lampEight wall outletsEight plugsA 40W transformer with built-in circuit breaker (vs. 20W)This kit will wire a 12 to 15-room dollhouse. A great buy- provides 15-20% savings over the purchase of these parts individually! To use the Cir-Kit outlets included in this kit, you must use Cir-Kit plugs. (Cir-Kit outlets are not compatible with Houseworks plugs.)
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
|
from $161
(2 stores)
See Details
|
|
|
|
If you're looking for that one kit to wire your entire doll
... Read more
If you're looking for that one kit to wire your entire dollhouse, this is the answer! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. This high-powered kit contains everything included in the Large House Wiring Kit (#72103): 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS all of these additional items:Double quantity of brads eyelets and tape wireAn in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseAn extra 15' of tape wireTable or carriage lampEight wall outletsEight plugsA 40W transformer with built-in circuit breaker (vs. 20W)This kit will wire a 12 to 15-room dollhouse. A great buy- provides 15-20% savings over the purchase of these parts individually! To use the Cir-Kit outlets included in this kit, you must use Cir-Kit plugs. (Cir-Kit outlets are not compatible with Houseworks plugs.)
Minimize
|
|
Go To Store
|
|
|
|
|
from $107
(2 stores)
See Details
|
|
|
|
|
from $31
(2 stores)
See Details
|
|
|
|
|
from $195
(2 stores)
See Details
|
|
|
|
|
from $26
(2 stores)
See Details
|
|
|
|
This popular kit contains everything included in the Starte
... Read more
This popular kit contains everything included in the Starter Wiring Kit, #7101: 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS these added extras,Double quantity of brads, eyelets and tape wireA 20W transformer with built-in circuit breaker (instead of a 10W)An in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseThese added items will easily allow the wiring of a 10 to 12-room dollhouse.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
The heart of Cir-Kit Concepts' electrical system is its 2-c
... Read more
The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. This kit contains all of the parts necessary to tape wire a 5-6 room dollhouse. No soldering, special tools or electrical knowledge necessary. Instructions and wiring diagram included. Kit includes: 1/8" brass brads15' roll conductive tape wirePilot hole punch (with needles)Test probeJunction spliceTransformer lead-in wire (with switch) A transformer is required for this kit but is not included. You decide which transformer is most suitable for your wiring needs. Packaging may vary.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
The leading electrification kit in the industry today! The
... Read more
The leading electrification kit in the industry today! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. Contains everything needed to completely wire a 6-room (up to 16 bulbs) dollhouse, including:1/8" bradsSmall hollow eyelets15' roll conductive tape wireOne 10W plug-in transformer with built-in circuit breakerPilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 Includes illustrated installation instructions.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
The leading electrification kit in the industry today! The
... Read more
The leading electrification kit in the industry today! The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. No soldering, special tools or electrical knowledge necessary. Contains everything needed to completely wire a 6-room (up to 16 bulbs) dollhouse, including:1/8" bradsSmall hollow eyelets15' roll conductive tape wireOne 10W plug-in transformer with built-in circuit breakerPilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 Includes illustrated installation instructions.
Minimize
|
|
Go To Store
|
|
|
|
|
from $20
(2 stores)
See Details
|
|
|
|
Use with Transformer Lead-In Wire #2222 or Power Strip #220
... Read more
Use with Transformer Lead-In Wire #2222 or Power Strip #2203. Circuit breaker not included. 1670 ma, 20W. For 13 to 26 65ma bulbs. 2 1/4"W x 3"H
Minimize
|
|
Go To Store
|
|
|
|
Light up your life or at least your dollhouse with these ne
... Read more
Light up your life or at least your dollhouse with these new 1/2-inch scale electrical components from Housworks! Special Introductory Price! This power strip has 12 outlets for male plugs, # H2204. It is designed to attach to a 12V transformer. For use with 1/2-inch scale lights. One power strip per package
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. 2 1/2"Dia. x 3 1/2"H including chain; ceiling mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
This popular kit contains everything included in the Starte
... Read more
This popular kit contains everything included in the Starter Wiring Kit, #7101: 1/8" bradsSmall hollow eyelets15' roll conductive tape wirePilot hole punch (with needles and bit)Test probeJunction spliceTransformer lead-in wire (with switch)Cir-Kit Tape Wire Instruction Book, #721015 PLUS these added extras,Double quantity of brads, eyelets and tape wireA 20W transformer with built-in circuit breaker (instead of a 10W)An in-line power switch provides on/off light control without the need to disconnect the lead-in wire from the dollhouseThese added items will easily allow the wiring of a 10 to 12-room dollhouse.
Minimize
|
|
Go To Store
|
|
|
|
The heart of Cir-Kit Concepts' electrical system is its 2-c
... Read more
The heart of Cir-Kit Concepts' electrical system is its 2-conductor tape wire that is applied in much the same way as transparent tape. This kit contains all of the parts necessary to tape wire a 5-6 room dollhouse. No soldering, special tools or electrical knowledge necessary. Instructions and wiring diagram included. Kit includes: 1/8" brass brads15' roll conductive tape wirePilot hole punch (with needles)Test probeJunction spliceTransformer lead-in wire (with switch) A transformer is required for this kit but is not included. You decide which transformer is most suitable for your wiring needs. Packaging may vary.
Minimize
|
|
Go To Store
|
|
|
|
Crafted of high-quality unfinished wood. Includes a brass f
... Read more
Crafted of high-quality unfinished wood. Includes a brass fire box, two-bulb flickering unit, two spare bulbs and natural logs. Use with 12V transformer (not included). Please note that the flickering unit on this fireplace will cause all lights installed on the same transformer to flicker also. 5"W x 3 5/8"H x 1 5/16"D
Minimize
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. Removable frosted tulip shades. 2 1/2"Dia. x 3 1/2"H including chain; ceiling mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
This unit was originally designed for a 16-20 volt system.
... Read more
This unit was originally designed for a 16-20 volt system. It can be attached to 12V tape or round wire system, but the effect will be more like a blink than a flicker. This product does not require a separate transformer and comes with insulating foam sticker for easy installation.
Minimize
|
|
Go To Store
|
|
|
|
Use during installation of 12V system to eliminate shorts a
... Read more
Use during installation of 12V system to eliminate shorts and blown fuses, find breaks in tape wiring and test transformer.
Minimize
|
|
Go To Store
|
|
|
|
Output: 250ma, 12V, 10W illuminates up to 4 bulbs, great fo
... Read more
Output: 250ma, 12V, 10W illuminates up to 4 bulbs, great for a small house or display box. Does not include circuit breaker.
Minimize
|
|
Go To Store
|
|
|
|
This small string is perfect for wreaths, table top trees o
... Read more
This small string is perfect for wreaths, table top trees or small areas. Connect to a transformer or 12V battery. Plug not included. 38" green wire; lighted section: 24"
Minimize
|
|
Go To Store
|
|
|
|
With a built-in circuit breaker, this transformer is virtua
... Read more
With a built-in circuit breaker, this transformer is virtually burn-out proof! In the event of an overload, the breaker opens and removes voltage until the unit cools. Then the breaker resets itself and reapplies voltage to the output. The 12V/5W Transformer outputs AC current.500ma for up to 10 60ma bulbs1 15/16"W x 2 3/4"H x 1 9/16"D
Minimize
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. Removable gold-trimmed white plastic shades. 1 5/8"W x 1 3/8"H x 1 1/2"D; wall mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. No panes. 1"W x 1 7/8"H x 1 1/2"D; wall mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. Frosted scalloped shades topped with clear plastic chimneys. 2 3/4"Dia. x 3"H ; ceiling mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
Lighting your dollhouse, or adding extra lights, has never
... Read more
Lighting your dollhouse, or adding extra lights, has never been easier
no transformer required! Simply stick these lights where desired and turn them on with the little built-in switch on the battery case. These are high-quality brass/metal fixtures with LED bulbs (non-replaceable) that will burn for up to 4000 hours, putting out 95% less heat than traditional bulbs. The 3V watch batteries can be replaced and each will last up to 80 hours. Just be sure to plan them for a spot you can easily reach to flip the switch. If a fixture will not be lit for a long period of time, it is best to remove the battery. With clear plastic panes. 7/8"W x 2"H x 1 5/8"D; wall mount plate 3/4"Dia. flowplayer("player", "Assets/videos/flowplayer-3.2.5.swf");
Minimize
|
|
Go To Store
|
|
|
|
A transformer to dollhouse electrical interconnection. May
... Read more
A transformer to dollhouse electrical interconnection. May be used with any screw-terminal type transformer. One end of the wire is equipped with a plug for connection to the junction splice (#2223) on the dollhouse and the other with spade lugs for connection to the transformer output terminals. Includes 2 amp fuse. Wire is approximately 6' long.
Minimize
|
|
Go To Store
|
|
|
|
Includes a #2216 1500 ma fuse. Attaches to a 12 volt transf
... Read more
Includes a #2216 1500 ma fuse. Attaches to a 12 volt transformer. Contains 12 outlets for #2204 plugs. Use up to 23 12 volt bulbs with the power strip. A good way to wire a dollhouse that has already been wallpapered.
Minimize
|
|
Go To Store
|
