|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The new generation of 1/8 Monster trucks are here with much
... Read more
The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you dont have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body, and complete with Radio system!! Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!! Pistol Remote Control Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 2-Speed Transmission Heavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio and Ready to Run Over the Competition! Adjustable Treaded Aluminum Shocks! 4 big bore shocks with functional reservoirs. These shocks are tuned for the track with racing springs. The functional reservoirs provide added stability. Heavy Duty shock towers, turnbuckle, handle bar, high impact bumper, list goes on. The Exceed RC Mad Beast is simply the most powerful, durable, and truck ever introduced in R/C industry. Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims with 17mm Hex Hub The Mad Beast is equipped with 270cc Tank has a stone fuel pick up and O ring seal on the Cap. Less refueling and more Driving! Hardened and Coated Steel Gears. This is by far the strongest differential system ever developed in the industry. The suspension geometry is fully adjustable and offers superior handling in rough conditions. The Mad Beast Monster Truck has stability and smoother weight distribution. Exceed RC is introducing a new engine for the Mad Beast! This new engine is equip with .28 Engine Level. You can now get the Mad Beast with more power! The .28 Engine now comes with a new carburetor that allows for easier tuning capabilities along with a much more fuel efficient delivery system without sacrificing power. The power band on the new .28 Engine is smooth yet provides more torque than any other nitro powered engine. Experience a truly powerful nitro monster truck. The Mad Beast Monster Truck comes with an automatic 2 speed transmission. This transmission allows the Mad Beast to reach speeds of 35+ mph. Stopping the massive Mad Beast is no match for the all new 4 disc metal brake system. This new system stops the powerful Mad Beast on a dime. Features include vented brake discs along with fully adjustable front and rear brake controls.
Minimize
Orders received before 10am pacific ship out the same day.
In stock
|
|
Go To Store
|
|
|
Introducing the new Rave 450 sized electric helicopter desi
... Read more
Introducing the new Rave 450 sized electric helicopter designed by Curtis Youngblood and Next D Designs (A division of CJ Youngblood Enterprises). This helicopter features an all metal head, high quality parts, carbon fiber u-frame design, tube driven tail and can run either 325mm or 350mm main blades in its stock form. Next-D Rave Model Specifications: Class: 450 (Stretched) Build: Kit Blade Size: 325-350mm Level: Intermediate to advanced Frame Material: Carbon Fiber Frame Type: Single Piece Servo to Swash Linkage: Direct Servo Size: Micro Rotor Grips: Metal Head Block: Metal Links: Ball Swash: Metal Swash Type: CCPM 120° Tail Drive System: Shaft Driven Tail Pitch Slider: 2 point Tail Blade Grips: Metal Tail Case: Metal Boom Struts: Carbon
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Exceed-RC is reinventing the buggies to a whole new lev
... Read more
The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Rave 90 ENV Nitro Features: * Simple and easy-to-build desi
... Read more
Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame design for precision flying * Multi-position control options for extreme or precision flying * +/- 14 degree collective ability for extreme 3D * Dual support clutch design for longevity and durability * Clutch is a modular design for easy removal from top or bottom * Multi-use frame stiffeners to fine-tune preferred setup * Fuel tank capacity: 660cc * Heavy duty tail system * Smooth torque tube tail drive for high end 3D or FAI performance. * Versatile frame design for easy conversion from Nitro to Electric * Versatile overall design for easy conversion to and from flybarless * Large, high-efficiency cooling fan system * Removable fan shroud baffle to optimize for different engines * Large Mod1 main gear * Large Mod1 pinion * Tail boom pinned in both ends for positioning and safety * Ready to fly weight is 4.3kg * New control surface pinning feature for easy pushrod setup Rave 90 ENV Nitro Specifications: * Length: 1340mm * Height: 474mm * Main Blade Length: 690-710mm * Main Rotor Diameter: 1531-1571mm * Tail Rotor Diameter: 294.5 mm * Engine Pinion Gear: 16T * Main gear: 130 tooth Mod1 * Autorotation Tail Drive Gear: 118T Mod1 * Drive Gear Ratio: 8.125:1:4.54(E:M:T) * Fuel Tank Capacity: 660CC Included in Kit: Rave ENV Nitro kit: Carbon Fiber Painted Fiberglass Canopy 3K Carbon Fiber Tail Blades Aluminum Tail Boom Carbon Tail Gear Box Plates FAI-Style Smooth Paddles (plastic) Fuel Tubing Fuel clip: 5mm Fuel clip: 6mm Switch Mount Satellite Receiver Mount Boom Support Bridge Velcro Straps Fan Shroud Baffle (fits varied engine heights)
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
|
|
from $24
(2 stores)
See Details
|
|
|
The new generation of 1/8 Monster trucks are here with much
... Read more
The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you dont have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body, and complete with Radio system!! Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!! Pistol Remote Control Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis Plates Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 2-Speed Transmission Heavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel Tank Adjustable Threaded Aluminum Shocks Aluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing Clutch Full Sealed Ball Bearing Set All Assembled with Radio and Ready to Run Over the Competition! Adjustable Treaded Aluminum Shocks! 4 big bore shocks with functional reservoirs. These shocks are tuned for the track with racing springs. The functional reservoirs provide added stability. Heavy Duty shock towers, turnbuckle, handle bar, high impact bumper, list goes on. The Exceed RC Mad Beast is simply the most powerful, durable, and truck ever introduced in R/C industry. Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims with 17mm Hex Hub The Mad Beast is equipped with 270cc Tank has a stone fuel pick up and O ring seal on the Cap. Less refueling and more Driving! Hardened and Coated Steel Gears. This is by far the strongest differential system ever developed in the industry. The suspension geometry is fully adjustable and offers superior handling in rough conditions. The Mad Beast Monster Truck has stability and smoother weight distribution. Exceed RC is introducing a new engine for the Mad Beast! This new engine is equip with .28 Engine Level. You can now get the Mad Beast with more power! The .28 Engine now comes with a new carburetor that allows for easier tuning capabilities along with a much more fuel efficient delivery system without sacrificing power. The power band on the new .28 Engine is smooth yet provides more torque than any other nitro powered engine. Experience a truly powerful nitro monster truck. The Mad Beast Monster Truck comes with an automatic 2 speed transmission. This transmission allows the Mad Beast to reach speeds of 35+ mph. Stopping the massive Mad Beast is no match for the all new 4 disc metal brake system. This new system stops the powerful Mad Beast on a dime. Features include vented brake discs along with fully adjustable front and rear brake controls.
Minimize
Orders received before 10am pacific ship out the same day.
In stock
|
|
Go To Store
|
|
|
Rave 90 ENV Nitro Features: * Simple and easy-to-build desi
... Read more
Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame design for precision flying * Multi-position control options for extreme or precision flying * +/- 14 degree collective ability for extreme 3D * Dual support clutch design for longevity and durability * Clutch is a modular design for easy removal from top or bottom * Multi-use frame stiffeners to fine-tune preferred setup * Fuel tank capacity: 660cc * Heavy duty tail system * Smooth torque tube tail drive for high end 3D or FAI performance. * Versatile frame design for easy conversion from Nitro to Electric * Versatile overall design for easy conversion to and from flybarless * Large, high-efficiency cooling fan system * Removable fan shroud baffle to optimize for different engines * Large Mod1 main gear * Large Mod1 pinion * Tail boom pinned in both ends for positioning and safety * Ready to fly weight is 4.3kg * New control surface pinning feature for easy pushrod setup Rave 90 ENV Nitro Specifications: * Length: 1340mm * Height: 474mm * Main Blade Length: 690-710mm * Main Rotor Diameter: 1531-1571mm * Tail Rotor Diameter: 294.5 mm * Engine Pinion Gear: 16T * Main gear: 130 tooth Mod1 * Autorotation Tail Drive Gear: 118T Mod1 * Drive Gear Ratio: 8.125:1:4.54(E:M:T) * Fuel Tank Capacity: 660CC Included in Kit: Rave ENV Nitro kit: Carbon Fiber Painted Fiberglass Canopy 3K Carbon Fiber Tail Blades Aluminum Tail Boom Carbon Tail Gear Box Plates FAI-Style Smooth Paddles (plastic) Fuel Tubing Fuel clip: 5mm Fuel clip: 6mm Switch Mount Satellite Receiver Mount Boom Support Bridge Velcro Straps Fan Shroud Baffle (fits varied engine heights)
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Rave 90 ENV Nitro Features: * Simple and easy-to-build desi
... Read more
Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame design for precision flying * Multi-position control options for extreme or precision flying * +/- 14 degree collective ability for extreme 3D * Dual support clutch design for longevity and durability * Clutch is a modular design for easy removal from top or bottom * Multi-use frame stiffeners to fine-tune preferred setup * Fuel tank capacity: 660cc * Heavy duty tail system * Smooth torque tube tail drive for high end 3D or FAI performance. * Versatile frame design for easy conversion from Nitro to Electric * Versatile overall design for easy conversion to and from flybarless * Large, high-efficiency cooling fan system * Removable fan shroud baffle to optimize for different engines * Large Mod1 main gear * Large Mod1 pinion * Tail boom pinned in both ends for positioning and safety * Ready to fly weight is 4.3kg * New control surface pinning feature for easy pushrod setup Rave 90 ENV Nitro Specifications: * Length: 1340mm * Height: 474mm * Main Blade Length: 690-710mm * Main Rotor Diameter: 1531-1571mm * Tail Rotor Diameter: 294.5 mm * Engine Pinion Gear: 16T * Main gear: 130 tooth Mod1 * Autorotation Tail Drive Gear: 118T Mod1 * Drive Gear Ratio: 8.125:1:4.54(E:M:T) * Fuel Tank Capacity: 660CC Included in Kit: Rave ENV Nitro kit: Carbon Fiber Painted Fiberglass Canopy 3K Carbon Fiber Tail Blades Aluminum Tail Boom Carbon Tail Gear Box Plates FAI-Style Smooth Paddles (plastic) Fuel Tubing Fuel clip: 5mm Fuel clip: 6mm Switch Mount Satellite Receiver Mount Boom Support Bridge Velcro Straps Fan Shroud Baffle (fits varied engine heights)
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Rave 90 ENV Nitro Features: * Simple and easy-to-build desi
... Read more
Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame Rave 90 ENV Nitro Features: * Simple and easy-to-build design * All-metal rotor head * Light weight design for ultimate 3D performance * Rigid frame design for precision flying * Multi-position control options for extreme or precision flying * +/- 14 degree collective ability for extreme 3D * Dual support clutch design for longevity and durability * Clutch is a modular design for easy removal from top or bottom * Multi-use frame stiffeners to fine-tune preferred setup * Fuel tank capacity: 660cc * Heavy duty tail system * Smooth torque tube tail drive for high end 3D or FAI performance. * Versatile frame design for easy conversion from Nitro to Electric * Versatile overall design for easy conversion to and from flybarless * Large, high-efficiency cooling fan system * Removable fan shroud baffle to optimize for different engines * Large Mod1 main gear * Large Mod1 pinion * Tail boom pinned in both ends for positioning and safety * Ready to fly weight is 4.3kg * New control surface pinning feature for easy pushrod setup Rave 90 ENV Nitro Specifications: * Length: 1340mm * Height: 474mm * Main Blade Length: 690-710mm * Main Rotor Diameter: 1531-1571mm * Tail Rotor Diameter: 294.5 mm * Engine Pinion Gear: 16T * Main gear: 130 tooth Mod1 * Autorotation Tail Drive Gear: 118T Mod1 * Drive Gear Ratio: 8.125:1:4.54(E:M:T) * Fuel Tank Capacity: 660CC Included in Kit: Rave ENV Nitro kit: Carbon Fiber Painted Fiberglass Canopy 3K Carbon Fiber Tail Blades Aluminum Tail Boom Carbon Tail Gear Box Plates FAI-Style Smooth Paddles (plastic) Fuel Tubing Fuel clip: 5mm Fuel clip: 6mm Switch Mount Satellite Receiver Mount Boom Support Bridge Velcro Straps Fan Shroud Baffle (fits varied engine heights)
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Model Airplanes: This A-7 Corsair II USN Model Airplane is
... Read more
Model Airplanes: This A-7 Corsair II USN Model Airplane is crafted from wood. The A-7 Corsair II U.S. Navy aircraft arrives fully assembled and includes a wood desk stand. Scale: 1/50, 10 1/2" wingspan, 11 1/2" length. This authentic, extraordinary replica of the original aircraft was faithfully reproduced with kiln dried Philippine mahogany wood. Each model is meticulously carved, joined and then sanded by hand. The deep, rich finish is created when up to 35 layers of enamels are applied with the artist hand painting the details. No decals are used! The result is a handsome, wood sculpture to be admired and enjoyed. Shipping weight is calculated at 6 lbs. Send This Page To A Friend
Minimize
|
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Save over 40% when you purchase the entire Nativity Scene S
... Read more
Save over 40% when you purchase the entire Nativity Scene Standee Kit verses buying each piece individually. The nativity scene is made up of 7 cardboard standees. Use the Nativity Scene Standee Kit as a holiday decoration or as a prop in any Christmas play. Kit includes: Manger Standee - over 7' high x 7' wide Wisemen Standee - over - 5' high x 4' wide Mary Standee - over 3' high x 2' wide Joseph Standee - over 6' high x 3' wide Baby Jesus Standee - over 2' high x 1' wide Donkey Standee - over 3' high x 3' wide Shepherd and Sheep Standee - over 6' high x 4' wide
Minimize
|
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Introducing the new Rave 450 sized electric helicopter desi
... Read more
Introducing the new Rave 450 sized electric helicopter designed by Curtis Youngblood and Next D Designs (A division of CJ Youngblood Enterprises). This helicopter features an all metal head, high quality parts, carbon fiber u-frame design, tube driven tail and can run either 325mm or 350mm main blades in its stock form. Included Scorpion 6 Brushless Motor & Next D 325s Carbon Fiber Blade Next-D Rave Model Specifications: Class: 450 (Stretched) Build: Kit Blade Size: 325-350mm Level: Intermediate to advanced Frame Material: Carbon Fiber Frame Type: Single Piece Servo to Swash Linkage: Direct Servo Size: Micro Rotor Grips: Metal Head Block: Metal Links: Ball Swash: Metal Swash Type: CCPM 120° Tail Drive System: Shaft Driven Tail Pitch Slider: 2 point Tail Blade Grips: Metal Tail Case: Metal Boom Struts: Carbon
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Voted Parents' Choice Winner! All aboard for fun and learni
... Read more
Voted Parents' Choice Winner! All aboard for fun and learning! Our Wooden Name Train is beautifully crafted from New England rock maple and finished with non-toxic color stain, which allows the fine woodgrain to show through. Each letter measures about 2 1/2"H; engine and caboose measure 2"H. All alphabet characters A thru Z available, in assorted primary colors. Connect the cars with simple and safe magnets. All Name Trains include wooden engine and caboose.Compatible with other other wooden track systems and most related accessories. Recommended for ages 3 and up. On the right track for teaching children to spell their name while they play engineer!Crafted with pride in the USA.
Minimize
|
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Introducing the new Rave 450 sized electric helicopter desi
... Read more
Introducing the new Rave 450 sized electric helicopter designed by Curtis Youngblood and Next D Designs (A division of CJ Youngblood Enterprises). This helicopter features an all metal head, high quality parts, carbon fiber u-frame design, tube driven tail and can run either 325mm or 350mm main blades in its stock form. Included Scorpion 10 Brushless Motor and Radix 350s Carbon Fiber Blade Next-D Rave Model Specifications: Class: 450 (Stretched) Build: Kit Blade Size: 325-350mm Level: Intermediate to advanced Frame Material: Carbon Fiber Frame Type: Single Piece Servo to Swash Linkage: Direct Servo Size: Micro Rotor Grips: Metal Head Block: Metal Links: Ball Swash: Metal Swash Type: CCPM 120° Tail Drive System: Shaft Driven Tail Pitch Slider: 2 point Tail Blade Grips: Metal Tail Case: Metal Boom Struts: Carbon
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The new generation of 1/8 Monster trucks are here with much
... Read more
The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you dont have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body!! Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!! Adjustable Treaded Aluminum Shocks! 4 big bore shocks with functional reservoirs.These shocks are tuned for the track with racing springs. The functional reservoirs provide added stability. Heavy Duty shock towers, turnbuckle, handle bar, high impact bumper, list goes on. The Exceed RC Mad Beast is simply the most powerful, durable, and truck ever introduced in R/C industry. Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims with 17mm Hex Hub The Mad Beast is equipped with 270cc Tank has a stone fuel pick up and O ring seal on the Cap. Less refueling and more Driving! Hardened and Coated Steel Gears. This is by far the strongest differential system ever developed in the industry. The suspension geometry is fully adjustable and offers superior handling in rough conditions. The Mad Beast Monster Truck has stability and smoother weight distribution. Exceed RC is introducing a new engine for the Mad Beast! This new engine is equip with .28 Engine Level. You can now get the Mad Beast with more power! The .28 Engine now comes with a new carburetor that allows for easier tuning capabilities along with a much more fuel efficient delivery system without sacrificing power. The power band on the new .28 Engine is smooth yet provides more torque than any other nitro powered engine. Experience a truly powerful nitro monster truck. The Mad Beast Monster Truck comes with an automatic 2 speed transmission. This transmission allows the Mad Beast to reach speeds of 35+ mph. Stopping the massive Mad Beast is no match for the all new 4 disc metal brake system. This new system stops the powerful Mad Beast on a dime. Features include vented brake discs along with fully adjustable front and rear brake controls. Pistol Remote Control Radio& Engine 28 Level WheelBase:15"Weight:5.2kgPolished 6061 Aluminum Chassis PlatesMassive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub2-Speed TransmissionHeavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel TankAdjustable Threaded Aluminum ShocksAluminum MufflerHardeded and Coated Steel GearsMulti-piece rollbarSteel High-Temp Brake DiscHeavy Duty Slipper Clutch 3-Shoe Racing Clutch **TX/RX are required Full Sealed Ball Bearing Set All Assembled and Almost Ready to Run Over the Competition!
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Team Exceed RC has taken steps up with the most
... Read more
Team Exceed RC has taken steps up with the most successful drift car platforms yet and adapted it for intense wheel-spinning action. The result is the MadSpeed Drift Car. Ready to hit the streets right from the box, the MadSpeed Drift Car packs a long list of features and a distinctive look that will leave the competition in the dust. Power is routed through a high performance motor and electronic speed control, while a 540 motor offers the tire-shredding torque and RPMs you need for high-speed drifting. In addition to the unmatched power and ease of use, the MadSpeed looks eye catch on the road that everyone wants one. The prepainted body features detailed side mirrors, a rear wing, chrome exhaust and more, for a true street machine that can turn heads and take home trophies. Features Unique centralized low center of gravity design Detailed side-view mirrors, wheels, wing and exhaust Street-ready detailed 350 drift body CNC aluminum upper deck CNC aluminum center drive CNC aluminum motor mount Durable oil filled shock Pistol Transmitter Radio Control Exceed RC electronic speed control with 540 brush motor 3KG High-Torque steering servo Foam bumper for added protection when drifting Easy access front and rear ball differentials Specifications: Type: 4WD Electric Drift Car Scale: 1/10 Length: 17.32 in (440mm) Width: 7.48 in (190mm) Wheelbase: 10.20 in (259mm) Weight: 3.3 lb (1496.g) Chassis: Molded composite Suspension: Independent Tire Type: Drifting rubber Motor or Engine: High-performance 540 motor Speed Control: Exceed RC engineered Speed Control Radio: Pistol radio system Servos: 3KG.cm high-torque steering servo Kit/RTR: RTR Shock Type: Aluminum, coil-over oil filled Body: Prepainted 350 Drift body Ball Bearings: Complete Battery: 7.2v Ni-MH 1800mAh
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
2007 Newest DragonFly 53#1 is more powerful, flies longer a
... Read more
2007 Newest DragonFly 53#1 is more powerful, flies longer and has better servo resolution for more precision flying indoors and outdoors. The helicopter is easy to fly and spot landing on the kitchen table or other platform presents an entertaining challenge. You will also be impressed with its stability! The DragonFly 53#1 is a true Ready-to-Fly (RTF) product. Everything you need is included. To begin, you just got to get the battery charging right away. The DragonFly 53#1 has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The contra-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each others rotational torque . In addition, the dual blade setup provides more gyroscopic stability. In plain English: you look much better on the stick than you thought you would. On close inspection of the main rotor unit, you will notice that the lower rotor provides cyclic control for the ship. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the DragonFly 53#1 turning in the direction opposite to the rotation of the faster moving rotor. It has the rate adjustment and gyro adjustment pots right on the side of the ship, allowing you to make the DragonFly 53#1 more responsive in slightly windy conditions. It also lets more experienced pilots tune the ship to their liking. The DragonFly 53#1 ships with the rate and gyro pots at the low setting for maximum stability on initial flights. Keep in mind the aim of the DragonFly 53#1 an entertaining R/C heli that allows beginners to get into the hobby inexpensively and experienced pilots to add a "leisure" ship to their stable at an extremely reasonable price. The DragonFly 53#1 comes with a 4-channel, 72mHz transmitter, 7.4V 1250mAh lithium-polymer battery pack, charger and extra rotor blades. The transmitter has two features worthy of note. On the front there is a color battery meter which makes it easy to tell when it is time to replace the alkaline batteries. On the back, there are open dip switches for non-standard heli flyers to alter the configuration of the radio to a style they are accustomed to using. Optional Li- poly battery will help to achieve better performance and longer flight time. Feature: Improved version! This is the 2007 version with a lot of adjustment and improvements. Design of metal main frame, metal swash plate and metal rotor head is of legerity, innovation, precise and stability Coaxial structure effectively offers stable flight and easy operation. The 53#1 series is an optional model for the early beginner The combination of prompt servos ensures various flight courses It is possible to adjust the servo extent and the sensitivity of built-in gyro. Customized fine adjustment makes your flight more perfect 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Powerful 2 x 370SH carbon brush motors with anti-wind ability Separate servos from mixer, more precision movement More stable flight, even first timer can control easily SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Dual counter rotating rotor which eliminates the need for a tail rotor Reliable high quality mixer with built-in gyro board Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Factory Pre- assembled, zero assembly time Pre-positioned servo
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Speed across the water with your RC High Performance NEW DE
... Read more
Speed across the water with your RC High Performance NEW DESIGN SPEED BOAT! This boat has a huge amazing factor. Everybody who sees this 34" monster is literally blown away by the sheer size of this boat as well as the quality of its amazing paint work. Everything about this boat is simply stunning even before you put it in the water. It is constructed by hand using light weight and super strong epoxy resin Fiberglass Vee to increase speed and improve handling and stability, and then factory painted to the highest standard. The boat comes complete with a strong plywood stand making starting easy. That is what everybody says as soon as they see this missile. This boat has been a huge success in races seen literally all over the world. It is jaw dropping good looking and has blown everything away in the water, and as fast as it looks. Engine, Electronics and Muffler are Not Included in KIT Package! For illustration purpose ONLY!! Specs Length: 860mm Beam: 290mm Height: 170mm Weight: 1600g Propeller: Carbon-reinforced plastic D36*P1.4 3-blade Driveline: Flexible drive Harware: CNC aluminum steerable outdrive Hull material: Fiberglass ( FRP ) Vee Radio (Required): 2 channel, 1 servo Motor: (Required) 2848-2636KV Brushless Battery (Required): 11.1v 2100-4500mAh LiPo
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
|
|
from $1.98
(2 stores)
See Details
|
|
|
The new generation of 1/8 Monster trucks are here with much
... Read more
The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again.This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you dont have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body, and complete with Radio system!! Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!! Adjustable Treaded Aluminum Shocks! 4 big bore shocks with functional reservoirs.These shocks are tuned for the track with racing springs. The functional reservoirs provide added stability. Heavy Duty shock towers, turnbuckle, handle bar, high impact bumper, list goes on. The Exceed RC Mad Beast is simply the most powerful, durable, and truck ever introduced in R/C industry. Massive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims with 17mm Hex Hub The Mad Beast is equipped with 270cc Tank has a stone fuel pick up and O ring seal on the Cap. Less refueling and more Driving! Hardened and Coated Steel Gears. This is by far the strongest differential system ever developed in the industry. The suspension geometry is fully adjustable and offers superior handling in rough conditions. The Mad Beast Monster Truck has stability and smoother weight distribution. Exceed RC is introducing a new engine for the Mad Beast! This new engine is equip with .28 Engine Level. You can now get the Mad Beast with more power! The .28 Engine now comes with a new carburetor that allows for easier tuning capabilities along with a much more fuel efficient delivery system without sacrificing power. The power band on the new .28 Engine is smooth yet provides more torque than any other nitro powered engine. Experience a truly powerful nitro monster truck. The Mad Beast Monster Truck comes with an automatic 2 speed transmission. This transmission allows the Mad Beast to reach speeds of 35+ mph. Stopping the massive Mad Beast is no match for the all new 4 disc metal brake system. This new system stops the powerful Mad Beast on a dime. Features include vented brake discs along with fully adjustable front and rear brake controls. Pistol Remote Control Radio& Engine 28 Level WheelBase:15"Weight:5.2kgPolished 6061 Aluminum Chassis PlatesMassive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub2-Speed TransmissionHeavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel TankAdjustable Threaded Aluminum ShocksAluminum MufflerHardeded and Coated Steel GearsMulti-piece rollbarSteel High-Temp Brake DiscHeavy Duty Slipper Clutch 3-Shoe Racing ClutchFull Sealed Ball Bearing SetAll Assembled with Radio and Ready to Run Over the Competition!
Minimize
|
This store is not yet rated
|
Go To Store
|