> Tools and Accessories > used hard drives sale/store smart office

Peerless Pressure Blower Direct Drive Without Motor Standar ... Read more

Peerless Pressure Blower Direct Drive Without Motor Standard Frame Size 48 Application: Pressure blowers are generally used on industrial applications for small exhaust systems where air is laden with dust or grit and also for supplying high pressure air for conveying and cooling. Features: Wheels - Constructed with straight radial blades of heavy cast aluminum for self cleaning feature, dynamically balanced and designed for efficient operation. Housings - Arc-welded 16 gauge steel housings and motor bases for rigidity and long life. Motors - Standard units are furnished with open ball bearing, rigid mounted motors of either single phase capacitor-induction type or three phase induction type. Motors can also be furnished totally enclosed or explosion proof or with special current characteristics for special applications. Rotation and Discharge - Furnished for clockwise rotation, bottom horizontal discharge unless otherwise specified. At time of installation housings or wheels may be turned for other discharges and rotation if so desired.Capacities - Tested in accordance with AMCA Standards 210. 18.00 L. 17.00 W. 20.00 H. Minimize

Flat Face Idler, Shaft Required 6agl6, Outside Dia 4-3/8 In ... Read more

Flat Face Idler, Shaft Required 6agl6, Outside Dia 4-3/8 In, Hub Dia 1-7/8 In, Face Width 1-1/16 In, Bore Dia 1 In, Length Through Bore 1-1/4 In, Construction Cast Iron, Needle Bearings, For Use With Drive Tighteners And Tightener Shafts, For Use On Back Side Of V-belts,gearbelts And Drive Tighteners Minimize

FEATURES:Crowfoot wrenches are used in hard to reach restr ... Read more

FEATURES:Crowfoot wrenches are used in hard to reach restricted access situations where a standard wrench or ratchet cannot reach. Anti-Slip Design open end (ASD) has patented locking grooves that help prevent the wrench from slipping off the fastener when turning. The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding. Broad size range ensures the right tool for the application will be available. Typically used in lower torque applications. Full polish finish provides corrosion resistance and easy to clean surfaces. Minimize

Flat Face Idler, Shaft Required 6agl7, Outside Dia 4-3/8 In ... Read more

Flat Face Idler, Shaft Required 6agl7, Outside Dia 4-3/8 In, Hub Dia 1-7/8 In, Face Width 2-1/16 In, Bore Dia 1 In, Length Through Bore 2-1/2 In, Construction Cast Iron, Needle Bearings, For Use With Drive Tighteners And Tightener Shafts, For Use On Back Side Of V-belts,gearbelts And Drive Tighteners Minimize

FLOOR MACHINE WITH DRIVE BRUSH For Floor care maintenan ... Read more

FLOOR MACHINE WITH DRIVE BRUSH For Floor care maintenance including stripping, scrubbing, spray buffing, polishing, sanding, shampooing and bonnet cleaning. Equipped with cool-running large frame 1 1/2 HP motor, with all-steel planetary gearboxes. Brush-speed 175 RPM's. Powder coated aluminum chassis is chip and corrosion resistant. Star latch allows operator to adjust handle, using either hand or foot. Dual deadman switch system stops motor with release of trigger. Safety latch disables the machine when not in use. Non-marking 5" solid wheels. 50' power cord. UL listed. Includes drive brush. Minimize

Flat Face Idler, Shaft Required 6agl5, Outside Dia 1-3/4 In ... Read more

Flat Face Idler, Shaft Required 6agl5, Outside Dia 1-3/4 In, Hub Dia 1-1/4 In, Face Width 9/16 In, Bore Dia 1/2 In, Length Through Bore 3/4 In, Construction Cast Iron, Needle Bearings, For Use With Drive Tighteners And Tightener Shafts, For Use On Back Side Of V-belts,gearbelts And Drive Tighteners Minimize

Chain Coupling Cover, Outside Dia 6.000 In, Width 2.6875 In ... Read more

Chain Coupling Cover, Outside Dia 6.000 In, Width 2.6875 In, Max Parallel Misalignment 0.005 In, Angular Misalignment Tolerance 11 Degree (10t-19t), 1/2 Degree (20t-24t), End Float Tolerance 0.060 In, Temp Range -25 To 150 Degrees F, Material Cast Aluminum, For Use With 6agt1, 6agt2 Minimize

This J&D Sales 48in. Belt-Drive Drum Fan destratifies the a ... Read more

This J&D Sales 48in. Belt-Drive Drum Fan destratifies the air and creates a more consistent temperature to help reduce heating and cooling costs. U.S.A. Fan Diameter (in.): 48, Air Delivery... Minimize

1/4 x 1 1/4 Round Split Drive Anchor Zinc (100) - The split ... Read more

1/4 x 1 1/4 Round Split Drive Anchor Zinc (100) - The split drive anchor is a one-piece tamper-resistant, pre-expanded anchor. The anchor is designed for use in solid base material such as concrete. They are available in high strength, heat-treated alloy steel, zinc plated in either a flat or round head style. Split anchor, split drive anchors, flat head split anchor, round head split anchor, split bolt anchor, sup-r-split, spike, drive anchor, CSD, countersunk split drive anchor. Minimize