> Tools and Accessories > Router Bits > Toolup.com

Amana 55380 Specifications: Pattern Type: Classical "A ... Read more

Amana 55380 Specifications: Pattern Type: Classical "A" Reveal: 3/8" Diameter: 1-5/8" Carbide Height: 11/16" Shank: 1/2" Length: 3"Amana 55380 Features: Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening. For best results the rail cut should be done on a router table. With complete instructions. Note: Stile Tongue & Groove can be used on 1/2" through 3/4" material. Minimize

Greenlee 3036AVBB Specifications:Nut Ball Bearing Greenlee ... Read more

Greenlee 3036AVBB Specifications:Nut Ball Bearing Greenlee 3036AVBB Features:For use with Greenlee 741BB Punch Kit Minimize

Amana 49526 Specifications: Large diameter: 3-1/2" Rad ... Read more

Amana 49526 Specifications: Large diameter: 3-1/2" Radius: 1-1/2" Carbide height: 1-3/4" Shank diameter: 1/2" Overall length: 3-5/8" Amana 49526 Features: The basic edge-forming bit the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges as a simple profile or as a part of a complex one. Also known as roundover rounding over and quarter-round. If a smaller pilot bearing is used a second shoulder can be produced in effect making the bit a beading bit. Minimize

Amana 54221 Specifications: A Reveal: 1-3/8" Diameter: ... Read more

Amana 54221 Specifications: A Reveal: 1-3/8" Diameter: 3-3/8" Radius: 7/8" Carbide height: 1-3/16" Shank: 1/2" Length: 3-1/16"Amana 54221 Features: Replacement bearing #47713 (8MMx16MM) and #47763 (8MMx1-1/4"). Back Cutter #55435=1/4" Kerf; 5/16 Radius Cutter. Note: Reveal ( 'A') shown on tools reflects the total length of cut. Therefore you must deduct (usually 3/8") for allowing the panel to recess into the frame. Minimize

Amana 55350 Specifications: Pattern Type: Ogee A Reveal ... Read more

Amana 55350 Specifications: Pattern Type: Ogee A Reveal: 3/8" Diameter: 1-5/8" Carbide Height: 11/16" Shank: 1/2" Length: 3"Amana 55350 Features: 1/2" Shank Router Bit Minimize

Amana 54127 Specifications: Diameter: 2-1/4" Radius: 3/ ... Read more

Amana 54127 Specifications: Diameter: 2-1/4" Radius: 3/8" Carbide Height: 15/16" Shank: 1/2" Length: 2-7/8"Amana 54127 Features: The ogee pattern has a step at the end of the concave portion of the curve. Using the optional 3/8" bearing produces with a fillet at the convex end of the curve. Use in a handheld or table-mounted router. Minimize

Amana 51560 Specifications: Thickness: 3/4" Radius: 3/8 ... Read more

Amana 51560 Specifications: Thickness: 3/4" Radius: 3/8" Carbide height: 1-5/16" Diameter: 1-1/4" Shank: 1/2" Length: 2-3/4"Amana 51560 Features: Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads window sills table and counter edges shelves and making moldings. The nose diameter is the thickness of stock that can be nosed i.e. given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table. Minimize

Amana 54200 Specifications: Bead radius: 7/32" Large d ... Read more

Amana 54200 Specifications: Bead radius: 7/32" Large diameter: 2-1/4" Carbide height: 1-7/8" Shank diameter: 1/2" Overall length: 4" Max RPM: 12 000 Amana 54200 Features: This tool was designed to cut over 40 different molding patterns. By making simple adjustments to the cutter height and fence position and making two or more passes you can achieve a wide variety of profiles and architectural details. Recommended for use in a router table. Available with 1/2" shank only. (sold separately) Tool No. 54198 is a new minature version of the multi-form bit(sold separately). Minimize

Amana 49360 Specifications: Diameter: 2" Cutting Lengt ... Read more

Amana 49360 Specifications: Diameter: 2" Cutting Length: 7/8" Shank Diameter: 1/2" Overall Length: 3" Max RPM: 22 000 Amana 49360 Includes:(1) 2" diameter rabbet bit (1) Hex key (1) Instructions (1) All necessary parts for 5/8" and 3/4" depth rabbets Amana 49360 Features: Enables rabbet cuts from 1/16" through 3/4" in 1/16" increments Five undersized blywood sizes using optional collars Particularly useful when working with large stock or when a precise rabbet depth is required Minimize

Porter Cable 43540 Specifications: Flute Length: 1-3/8" ... Read more

Porter Cable 43540 Specifications: Flute Length: 1-3/8" Fillet Height: 11/64" Large Radius: 5/16" Small Radius: 11/64" Shank Diameter: 1/2" Overall Length: 3-17/64" Porter Cable 43540 Features: Classic combination of two styles commonly used in furniture and cabinetry 40% thicker carbide than on standard bits Results in a stronger longer-lasting bit Better heat and force distribution Generates less friction runs cooler Provides smoother cuts Allows faster feed rate Can be resharpened more times than standard carbide Minimize

Amana 54135 Specifications: Diameter: 2" Radius: 3/8" ... Read more

Amana 54135 Specifications: Diameter: 2" Radius: 3/8" Carbide height: 1" Shank: 1/2" Length: 2-3/4"Amana 54135 Features: The positions of the bead and the cove are reversed on this series of bits with the bead coming off the bearing. With the optional 3/8" pilot bearing the bit produces a fillet at the base of the bead. Use in either handheld or table-mounted router. Largest diameter bits should be run at reduced speed Minimize