> Tools and Accessories > Router Bits > Magnate

3 Wing, 6-piece, Carbide Tipped; Cabinet Profile; 1-5/8" Cu ... Read more

3 Wing, 6-piece, Carbide Tipped; Cabinet Profile; 1-5/8" Cutting Height; 1-1/4" Bore 3-1/4" Overall Diameter, Weight: 3.5 pounds, Manufacturer: Magnate Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

Right-Hand, MicroGrain Solid Carbide; Up Cut; 3/4" Cutting ... Read more

Right-Hand, MicroGrain Solid Carbide; Up Cut; 3/4" Cutting Diameter; 3" Cutting Length 6" Overall Length; 3/4" Shank Diameter, Weight: 1.56 pounds, Manufacturer: Magnate Minimize

This micrograin solid carbide spiral bit is designed for do ... Read more

This micrograin solid carbide spiral bit is designed for double sided laminated or veneered material. This bit is used where an excellent finish on the top and bottom. Use 1+1 (1 flute) compression bit where lower feed rate is required; Use 2+2 (2 flute) compression bit where standard feed rate is required; Minimize

This micrograin solid carbide spiral  bit is designed for s ... Read more

This micrograin solid carbide spiral  bit is designed for solid woods, wood composites and some plastics. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, extremely smooth finish on natural woods and man made composites. Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micrograin solid carbide spiral bit is designed for do ... Read more

This micrograin solid carbide spiral bit is designed for double sided laminated or veneered material. This bit is used where an excellent finish on the top and bottom. Use 1+1 (1 flute) compression bit where lower feed rate is required; Use 2+2 (2 flute) compression bit where standard feed rate is required; Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micrograin solid carbide spiral  bit is designed for s ... Read more

This micrograin solid carbide spiral  bit is designed for solid woods, wood composites and some plastics. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

3 Wing, 6-piece, Carbide Tipped; Concave Profile; 1-1/4" Cu ... Read more

3 Wing, 6-piece, Carbide Tipped; Concave Profile; 1-1/4" Cutting Height; 3/4" Bore 2-5/8" Overall Diameter, Weight: 3 pounds, Manufacturer: Magnate Minimize

PCD performs exceptionally well in CNC woodworking machines ... Read more

PCD performs exceptionally well in CNC woodworking machines even in plastic cutting and non-ferrous metals. PCD tooling is not recommended for hand operated tools. Some examples of uses included Panel Saws, Router Bits, Cutter Heads, and many more. Polycrystalline Diamond comprises of a polycrystalline aggregate of manufactured diamonds approximately 0.6 - 0.8mm thick bonded to a substrate of cemented tungsten carbide 1 - 2.7mm thick. The composite substance combines the hardness and high thermal conductivity of diamond with the brazeability of tungsten carbide. The micron-sized manufactured diamonds are randomly oriented to give consistent wear-resisting properties in all directions. PCD is the hardest man-made material in the world. It is excellent cutting material because it wears exceptionally well. The micron-sized manufactured diamonds of PCD are randomly oriented to give consistent wear across the cutting edge. The wear rate of PCD cutting edges is not only much less then carbide, but also much more even; PCD wears by erosion rather than edge breakdown. When used properly, end users can expect 30 times the tool life when compared to carbide; In some cases, up to 120 times the tool life. Not only does it wear evenly and increase tool life, PCD use cuts down on the end user's tool change and setup time which saves money and increases productivity Minimize

This micrograin solid carbide spiral bit is designed for do ... Read more

This micrograin solid carbide spiral bit is designed for double sided laminated or veneered material. This bit is used where an excellent finish on the top and bottom. Use 1+1 (1 flute) compression bit where lower feed rate is required; Use 2+2 (2 flute) compression bit where standard feed rate is required; Minimize

This micrograin solid carbide spiral  bit is designed for s ... Read more

This micrograin solid carbide spiral  bit is designed for solid woods, wood composites and some plastics. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micro-grain solid carbide end mill bit provides outsta ... Read more

This micro-grain solid carbide end mill bit provides outstanding performance and allows optimum cutting speeds and feeds, high rigidity and minimum tool deflection. It is designed for aggressive milling of most materials.  Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, extremely smooth finish on natural woods and man made composites. Minimize

This micrograin solid carbide spiral bit is designed for do ... Read more

This micrograin solid carbide spiral bit is designed for double sided laminated or veneered material. This bit is used where an excellent finish on the top and bottom. Use 1+1 (1 flute) compression bit where lower feed rate is required; Use 2+2 (2 flute) compression bit where standard feed rate is required; Minimize

Right-Hand, MicroGrain Solid Carbide; Down Cut; 3/4" Cuttin ... Read more

Right-Hand, MicroGrain Solid Carbide; Down Cut; 3/4" Cutting Diameter; 3" Cutting Length 6" Overall Length; 3/4" Shank Diameter, Weight: 1.56 pounds, Manufacturer: Magnate Minimize

This micrograin solid carbide spiral  bit is designed for s ... Read more

This micrograin solid carbide spiral  bit is designed for solid woods, wood composites and some plastics. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

3 Wing, 6-piece, Carbide Tipped; Concave Profile; 1-1/4" Cu ... Read more

3 Wing, 6-piece, Carbide Tipped; Concave Profile; 1-1/4" Cutting Height; 1-1/4" Bore 3-1/4" Overall Diameter, Weight: 3.5 pounds, Manufacturer: Magnate Minimize

Right-Hand, MicroGrain Solid Carbide; Up Cut; 5/8" Cutting ... Read more

Right-Hand, MicroGrain Solid Carbide; Up Cut; 5/8" Cutting Diameter; 2" Cutting Length 4" Overall Length; 5/8" Shank Diameter, Weight: 0.72 pounds, Manufacturer: Magnate Minimize

This micrograin solid carbide spiral  bit is designed for h ... Read more

This micrograin solid carbide spiral  bit is designed for higher feed rate, extremely smooth finish on natural woods and man made composites. Minimize

This micro-grain solid carbide end mill bit provides outsta ... Read more

This micro-grain solid carbide end mill bit provides outstanding performance and allows optimum cutting speeds and feeds, high rigidity and minimum tool deflection. It is designed for aggressive milling of most materials.  Minimize

This micro-grain solid carbide end mill bit provides outsta ... Read more

This micro-grain solid carbide end mill bit provides outstanding performance and allows optimum cutting speeds and feeds, high rigidity and minimum tool deflection. It is designed for aggressive milling of most materials.  Minimize

Up-Cut MicroGrain Solid Carbide; For Carving Machines; 3/4" ... Read more

Up-Cut MicroGrain Solid Carbide; For Carving Machines; 3/4" Cutting Diameter; 2" Cutting Length 3/4" Shank Diameter; 4" Overall Length, Weight: 0.75 pounds, Manufacturer: Magnate Minimize

This micrograin solid carbide spiral bit is designed for do ... Read more

This micrograin solid carbide spiral bit is designed for double sided laminated or veneered material. This bit is used where an excellent finish on the top and bottom. Use 1+1 (1 flute) compression bit where lower feed rate is required; Use 2+2 (2 flute) compression bit where standard feed rate is required; Minimize

This micrograin solid carbide spiral  bit is designed for s ... Read more

This micrograin solid carbide spiral  bit is designed for solid woods, wood composites and some plastics. Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top. Minimize

This micro-grain solid carbide end mill bit provides outsta ... Read more

This micro-grain solid carbide end mill bit provides outstanding performance and allows optimum cutting speeds and feeds, high rigidity and minimum tool deflection. It is designed for aggressive milling of most materials.  Minimize