> Tools and Accessories > Router Bits > Rockler

Pro-quality set features 1/2'' shank router bits with carbi ... Read more

Pro-quality set features 1/2'' shank router bits with carbide cutters. Make genuine Shaker Raised Panel, Rail and Stile Doors. Use with stock up to 3/4'' thick. Ideal for drawer fronts to complement raised panel doors. Minimize

Top quality router bits that meet the high standards of Roc ... Read more

Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. These bits are competitively priced while offering high performance and long life. If you are not 100% satisfied with these bits, send them back for a refund. These carbide-tipped bits let you create classic wooden toy train tracks, similar to the expensive store-bought track. Available individually, or in this set of all four bits. All have 1/2" shanks. # 23613 Set of four # 23613 includes: Double groove bit # 26400 cuts both track grooves in a single pass. Single groove bit # 20953 is used for curved track sections. Male connector bit # 21472 makes projection at one end of track piece. Female connector bit # 27288 makes recess at other end of track piece. White Birch, Maple or European Beech stock recommended. Recommended track size is 1-5/8" W by 1/2" H; track grooves are 1/8" deep, centered 1" apart. See Rockler.com for a FREE Downloadable Train Track Plan! Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions: 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back out 1/16" to 1/8". 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router; then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. Minimize

Pro-quality set features 1/2" shank router bits with carbid ... Read more

Pro-quality set features 1/2" shank router bits with carbide cutters. Make genuine Shaker Raised Panel, Rail and Stile Doors. Use with stock up to 3/4" thick. Ideal for drawer fronts to complement raised panel doors. Minimize

Set consists of the most common router bits used in everyda ... Read more

Set consists of the most common router bits used in everyday woodworking projects. Save more than $17 versus buying bits separately! All have 1/2" shanks to reduce chatter and provide maximum performance. Comes in convenient storage box. Includes five carbide-tipped bits: * Rabbeting bit with four bearings (#91595) cuts 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets * 3/4" dia. x 1" long straight, 2-fluted (#90638) * 3/8" radius x 5/8" high roundover (#91331) * 45 degree x 1/2" high chamfer (#91551) * 5/32" radius x 15/32" high Roman Ogee (#91628) Minimize

Stile and rail router bits for beautifully crafted frames. ... Read more

Stile and rail router bits for beautifully crafted frames. Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. Diameter: 1-9/16'' Cutter Height: the first bit is 1'', the second is 1/2'' Shank: 1/2'' Minimize

For years, dovetails have been a classic choice for joining ... Read more

For years, dovetails have been a classic choice for joining medium and larger sized panels - this kit finally makes them an option for small-box projects as well! Create gorgeous 1/4" through dovetails with tight 1/2" or 5/8" spacing (on center) in stock ranging from 1/4" to just 1/8" thick. The set includes a template, two miniature 1/8" shank router bits, a reducer to adapt your router, and a template guide. Attaches quickly and easily to the Rockler Dovetail Jig. No other template allows for dovetail spacing this tight. It works with panels up to 5-1/2" wide - perfect for a great range of small-box projects. Includes: -3/8" thick template -Template guide -1/4" carbide-tipped dovetail bit (1/8" shank) -1/8" carbide-tipped straight bit (1/8" shank) -1/4"-to-1/8" collet reducer Minimize

Save money by making your own Beadlock loose tenon stock; j ... Read more

Save money by making your own Beadlock loose tenon stock; just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 1/2" widths for a perfect match to your 1/2" Beadlock mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours! These router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bond. We use a 600 grit diamond sharpening wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. If for any reason you are not satisfied with the quality of the bit, return it with proof of purchase for a full refund or replacement. Minimize

Includes bearing to convert all bits from roundover to bead ... Read more

Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8'', 1/4'' and 3/8'' radius bits. Made with K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4'' shanks. Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8'', 1/4'' and 3/8'' radius bits. Minimize

Make tongue and groove joints with a single bit! Bits cut a ... Read more

Make tongue and groove joints with a single bit! Bits cut a 1/4" high groove, and are pre-set to cut a corresponding 1/4" tongue. Bearing diameter is 22mm; cut depth is 3/8". A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a refund. Minimize

Horizontal raised panel bits manufactured to Rockler's exac ... Read more

Horizontal raised panel bits manufactured to Rockler's exacting standards. Use horizontal bits to cut straight-sided or arch top panels. 2-1/2" overall diameter with a 1/2" bearing. 1/2" shank. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a full refund. NOTE: Designed for use in a router table only. Minimize

Top quality router bits that meet the high standards of Roc ... Read more

Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. Minimize

A fantastic value on high quality router bits. These bits a ... Read more

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Dimensions: Diameter 1-3/4", Cutter Height 1-1/8", Shank 1/2". Quality performance features include: K10 and K20 grade carbide for clean cutting action, final sharpening with 600 - 800 grit diamond wheels, precision balanced for smooth operation, baked-on anti-stick coating to reduce pitch and resin buildup. Guaranteed Unconditionally - If you are not 100% satisfied with these bits, send them back for a refund. Minimize

A fantastic value on high quality router bits. These bits a ... Read more

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Dimensions: Diameter 1-1/4", Cutter Height 1-1/2", Shank 1/2". Quality performance features include: K10 and K20 grade carbide for clean cutting action, final sharpening with 600 - 800 grit diamond wheels,precision balanced for smooth operation, baked-on anti-stick coating to reduce pitch and resin buildup. Guaranteed Unconditionally - If you are not 100% satisfied with these bits, send them back for a refund. Minimize

Produces the popular ogee profile table edge decoration. A ... Read more

Produces the popular ogee profile table edge decoration. A fantastic value on high quality router bits, these bits are competitively priced while offering high performance and long life. Specifications: *Rockler #: 32999. *Cutter width: 2-1/2". *Carbide height: 3/4". *Shank width: 1/2". *Shank length: 1-1/2". *Radius: 3/8". *Bearing: 1/2". Minimize

Top quality router bits that meet the high standards of Roc ... Read more

Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. Minimize

A fantastic value on high quality router bits. These bits a ... Read more

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action, final sharpening with 600 - 800 grit diamond wheels, precision balanced for smooth operation, plus a baked-on anti-stick coating to reduce pitch and resin buildup. Guaranteed Unconditionally - If you are not 100% satisfied with these bits, send them back for a refund. Minimize