> Tools and Accessories > drill press table/store tooltopia com

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

The DELTA 15-232 6 Speed Drill Press features a 3/4 HP sing ... Read more

The DELTA 15-232 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. Minimize

Also known as: BLR-11300, BLR11300; Low Speed 800 RPM - Be ... Read more

Also known as: BLR-11300, BLR11300; Low Speed 800 RPM - Better for UHSS & Boron Manual Feed w/ Leverage Handle Increases Cutter Performance (No air power is consumed to advance the cutter, resulting in faster spotweld removal) Adjustable Cutting Depth Two 360º Swivel Frame Clamps (Included) 2-5/16" and 5-5/8" depth Low Noise Built in Comfort Grip Includes (1) 8mm Triple-Fluted Solid Carbide Drill Bit Cutter RPM: 800 Air Pressure: 90 psi Air Consumption: 4 CFM (113 L/min) Length: 13-15/16” (346mm) Width: 9-1/4” (235mm) Depth: 2” (50mm) Weight: 5.5 lbs (2.5 kg) Noise Level: 84dB Minimize

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Ph ... Read more

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Phase 1, Voltage 115, Hz 60, Amps Ac 15, Capacity Cast Iron 1 In., Capacity Steel 3/4 In., Spindle Speed 145 To 4800 Rpm, Number Of Speeds 16, Chuck Size 0-5/8 In., Spindle Taper 3mt, Spindle Travel 4-1/8 In., Column Dia. 3-5/8 In., Quill Dia. 2 In., Table Work Surface 13-3/8 X 14-3/16 In., Table Slots 1/2 In., Base Size 12.60 X 12.60 In., Overall Height 68 In., Overall Width 18 In., Overall Depth 27.5 In. Minimize

Also known as: DAR-DD500XA1, DARDD500XA1; The DD500X shop ... Read more

Also known as: DAR-DD500XA1, DARDD500XA1; The DD500X shop model is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits-including split points and masonry bits. Increase capacity with 3/4” chuck accessory. The DD500X is ideal for the automotive audience New “Push to Stop” design on the drill point splitting port will not allow you to over split the bit point User replaceable quick change sharpening wheel design for simple replacement. “No tool needed” Variable alignment system improves precision, and adjustability Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits Sharpens 3/32”–1/2” drill bits Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits New permanent magnet motor produces consistent power, regardless of speed or load Sturdy plastic carrying case 3 yr warranty Includes instruction manual and DVD instructional video FREE Drill Doctor Left Hand Chuck Genext (DAR-SAO1506PA) Minimize

21-1/8 12 SPEED FLOOR DRILL PRESS"

Also known as: DAR-DD750XA1, DARDD750XA1; DD750X shop mode ... Read more

Also known as: DAR-DD750XA1, DARDD750XA1; DD750X shop model is designed for durability and has the flexibility required to sharpen the largest range of dull or broken bits-including split points and masonry bits. The DD750X also adds increased capacity, sharpening 1/2” to 3/4” bits. The precision and accuracy of the DD750X makes this an ideal model for the pro user. One chuck sharpens all sizes 3/32-3/4. Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits New “Push to Stop” design on the drill point splitting port will not allow you to over split the bit point Adjustable material take-off allows user to change the amount of bit material you can remove to further extend the life of your bits User replaceable sharpening wheel design for simple replacement. “No tool needed” New permanent magnet motor produces consistent power, regardless of speed or load Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits FREE Drill Doctor Left Hand Chuck Genext (DAR-SAO1506PA) Minimize

Also known as: KNKKK18TDNC; Features and Benefits: No cent ... Read more

Also known as: KNKKK18TDNC; Features and Benefits: No center punch or pilot hole required Rounder, more accurate holes Faster penetration Drills tough alloys Added strength against breakage Premium grade KnKut Drills are manufactured from a high grade M-7 Molybdenum high speed steel, that has a high vanadium content. KnKut Performance Drills are salt nitride treated, actually penetrating the tool’s surface giving KnKut Drills the hardness to drill tough materials such as stainless steel and titanium alloy. KnKut Performance Taps give you quick chip ejection and clean, accurate threading. These spiral point taps have form relieved threads and double back taper to reduce drag and heat. KnKut Performance Taps are made of Hi-Tungsten and Hi-Molybdenum tool steel. They are surface treated for maximum lubricity and have precision ground threads for the best in accuracy and performance. Spiral point construction drives chips ahead of the tap, permitting higher speeds and faster cutting with less torque. Recommended for stainless steels and other hard metals. Plug style spiral pointed taps are ideal for production tapping of through holes. Spiral point taps usually eliminate the need for taper style taps. Set conveniently places the correct Drill with the Tap being used. National Course Set Includes: 6-32 Tap (T) - -#36 Drill (D), 8-32 (T) -#29 (D), 10-24 (T)- #25 (D), 10-32 (T)- #21 (D), 1/4- 20 (T) -#7 (D), 5/16- 18 (T)- ltr F (D), 3/8- 16 (T)- 5/16 (D), 7/16- 14( T)- ltr U (D), 1/2- 13 (T)- 27/64 (D). Minimize

Floor Drill Press, Belt Drive, Swing (in.) 22", Motor Hp 2, ... Read more

Floor Drill Press, Belt Drive, Swing (in.) 22", Motor Hp 2, Phase 3, Voltage 230, Hz 60, Amps Ac 6, Capacity Cast Iron (in.) 1.5, Capacity Steel (in.) 1, Spindle Speed (rpm) 175 To 5760, Number Of Speeds 9, Chuck Size (in.) 0-5/8", Spindle Taper 4mt, Spindle Travel (in.) 6, Overall Height (in.) 75", Overall Width (in.) 23", Overall Depth (in.) 36" Minimize

Woodpeckers Drill Press Table features a generous 16" x 23" ... Read more

Woodpeckers Drill Press Table features a generous 16" x 23" x 1" surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2" thick material. Two double-wide T-tracks are embedded and bolted in place from underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-track is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to your drill press, no further adjustment is needed. The 36" fence uses the same double-wide track as the table to give you more stop and accessory mounting options. The fence comes with a simple L stop, and optional flip stops can be added for increased versatility. Mounting hardware is included. Minimize

Floor Drill Press, Belt Drive, Swing 15 In., Motor Hp 3/4, ... Read more

Floor Drill Press, Belt Drive, Swing 15 In., Motor Hp 3/4, Phase 1, Voltage 115, Hz 60, Amps Ac 11.0, Capacity Cast Iron 5/8 In., Capacity Steel 1/2 In., Spindle Speed 200 To 3630 Rpm, Number Of Speeds 16, Chuck Size 5/8 In., Spindle Taper Mt2, Spindle Travel 3-1/8 In., Column Dia. 2-7/8 In., Quill Dia. 1-7/8 In., Table Work Surface 11-1/2 In. X 11-1/2 In., Base Size 11 X 19 1/2 In., Overall Height 63-1/2 In., Overall Width 13-3/8 In., Overall Depth 26 In., Includes Drill Chuck With Key Minimize

Featuring the exceptional durability of solid steel and cas ... Read more

Featuring the exceptional durability of solid steel and cast iron construction, the RIKON 30-120 13-Inch Drill Press offers the convenience of 16 spindle speeds and large cast iron handle for easy operation. Powerful and easy to use, the 30-120 has a 13-inch swing, and it is ideal for both the hobbyist and professional user.30-120 13-Inch Drill PressAt a Glance:Rugged, user-friendly design with 1/2-horsepower motor for professionals and hobbyistsConvenient rack and pinion table height adjustmentClutch depth stop for easy and accurate settingsExceptional durability--solid steel and cast iron constructionTwo-year warranty13-inch drill press has 16 spindle speeds and is made of solid steel and cast iron. View larger.Replace bits and jigs fast with the easy-to-locate key and key-holder.Powerful 1/2-Horsepower MotorPowerful, smooth, and efficient, the 30-120 owes its robust performance to a 1/2-horsepower motor that provides plenty of torque for whatever material you're drilling. 16 spindle speeds from 200 to 3,630 RPM lend versatility. A clutch depth stop lets you set the drill depth, making the 30-120 particularly helpful for projects requiring repeated drilling.Cast Iron and Solid Steel ConstructionBoasting rugged cast iron and solid steel construction for vibration-free operation, this drill press is built to last. Complete with a cast iron head, tilting table, and base, as well as comfortable solid cast iron handles that will not bend or loosen after repeated use, the 30-120 provides reliable performance job after job, making it an ideal addition to a variety of job sites and shops.Easy-Adjust Table Height, Table Tilt, and Convenient Slot DesignDesigned to be exceptionally easy to use, the 30-120 is packed with helpful features. The table height conveniently adjusts with rack and pinion gears, which means you can make quick adjustments with the simple turn of a handle.It also features a convenient slot design, which makes for fast, easy mounting of jigs, vises, and fixtures. For added convenience and to accommodate different material sizes, the 11-3/16-inch table also tilts 45 degrees right or left and rotates a full 360 degrees.Dimensions and Warranty InformationThe 30-120 has a height of 39 inches, depth of 24 inches, and weighs 121 pounds. It is backed by a two-year warranty.What's in the BoxRIKON 30-120 13-Inch Drill Press with drill press head, arm, table support, table, column assembly, base, two loose hardware bags, chuck, owner's manual, and cast iron handle. Minimize

Also known as: DENDF15DX, DFXDF15DX, DTF-DF-15DX; Features ... Read more

Also known as: DENDF15DX, DFXDF15DX, DTF-DF-15DX; Features and Benefits:The kit version of the DF-15 gives you the option storing the Annihilator and your bits in a form-fitted hard plastic carrying caseThe DF-15DX comes complete with the Spot Annihilator, one in-line oilier, one 10mm and two 8mm Titanium-coated drill bits. Purchased individually, these pieces would cost $110.00, but with the kit you pay only $50 more. The original Spot weld drill! Often copied, never replicated. Dont be fooled by knockoffs. Our innovative design is so revolutionary its patented. The ultimate spot weld drill lets you set the depth and it pneumatically applies the correct amount of pressure. The drill speed and pressure have been calibrated so the tool cuts into the spot welds at the optimal condition, adding to the life of the drill bits. Complete jobs 75% fasterRemoves spot welds in secondsC-Clamp rotates and is easily removed to allow access to all areasDent Fix Equipment offers a complete one year warranty on this toolIncludes: blow molded caseLike items: AST1755 Minimize

Floor Drill Press, Vario Variable Speed, Gear, Swing (in.) ... Read more

Floor Drill Press, Vario Variable Speed, Gear, Swing (in.) 22", Motor Hp 2, Phase 1, Voltage 230, Hz 60, Amps Ac 10, Capacity Cast Iron (in.) 1.5, Capacity Steel (in.) 1, Spindle Speed (rpm) 30 To 3300, Number Of Speeds Variable, Chuck Size (in.) 0-5/8", Spindle Taper 3mt, Spindle Travel (in.) 4-7/8, Overall Height (in.) 73", Overall Width (in.) 21", Overall Depth (in.) 25" Minimize

The Challenge Handy-Drill Paper Drill was designed to bring ... Read more

The Challenge Handy-Drill Paper Drill was designed to bring speed and efficiency to quick-print and on-demand operations. Featuring a hand lever drilling operation, a manual trip side guide, and a heavy duty metal table, the Handy-Drill is a highly efficient and productive drilling machine. The Single Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position. Located around the spindle, the chip collector cups include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced. The back gauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. Features: 2-1/2” lift capacity in 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2"). Machine also available in a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2"). Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position. Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced. Adjustable backgauge stops – The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. Questions? We are here for you. Call us at (866)537-2244. Specifications and Features: ManufacturerChallenge Machinery ModelHandy-Drill Table Size18" x 19" Included Drill Bits5/16" & 1/4" Standard Drill Bits Compatible Drill BitsStyle A 2.5" Challenge Drill BitsAvailable in sizes 1/8" through 3/8" DiameterStandard, Premium, Teflon & Premium Teflon Drill Head OperationManual, Hand Lever Max. Drilling Capacity2.5" Minimum Distance Between Holes3/8", Center to Center Maximum Distance to Side Guide9-7/8" Maximum MarginCenter to Sheet Edge2-1/2" Cuts ThroughPaper Electrical115V, 2.7A, 60Hz; Single Phase, AC Weight / Ship Weight70 lbs. / 90 lbs. Ships ViaMust Ship Via Truck – Click To Request A Quote Dimensions21.2" L x 24" W x 22-3/8" H Quantity/Box1 Drill / Box Product Code04CHLHDRILL List Price$1395 Our PriceCall for Today's Special Price (866)537-2244 * The 2" Handy-Drill requires extra lead time. Call, email, or chat with us live for exact lead time. Minimize