> Tools and Accessories > drill press table/store harbor freight tools 9689

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty ... Read more

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty 3/4 HP motor Convenient belt tension lever for quick speed transition Table rotates 360° and pivots from 0° to 45° on each side with indicator to facilitate setting Replaceable 5/8" chuck and key available: part # RS5000A87 (Fits standard MT2 arbor) UL & CSA Listed Minimize

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, ... Read more

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, Hz 60, Amps 8.6, Capacity Cast Iron 5/8 In, Rpm 260, 400, 430, 560, 650, 680, 1260, 1440, 1620, 1950, 2270, 3080, Spindle Travel 3 1/4 In, Spindle To Table 29 In, Max Spindle To Base 46 1/2 In, Column Dia 2 7/8 In, Table Work Surface 10 1/2 X 10 1/2 In, Tilt Angle Left Or Right 45 Degrees, Overall Height 45 3/16 In, Overall Width 19 3/4 In, Overall Depth 13 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz 60, Amps 16.0, Capacity Cast Iron 1 In, Rpm 150, 260, 300, 440, 490, 540, 1150, 1550, 2200, Spindle Travel 5 In, Spindle To Table 25 1/2 In, Max Spindle To Base 47 In, Column Dia 4 In, Table Work Surface 18 5/8 X 16 5/8 In, Overall Height 68 In, Overall Width 19 In, Overall Depth 34 In, Chuck Size 5/8 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Floor Drill Press, Spline Drive, Swing 20 In., Motor Hp 2, ... Read more

Floor Drill Press, Spline Drive, Swing 20 In., Motor Hp 2, Phase 1, Voltage 115/230, Hz 60, Amps Ac 12.8, Capacity Cast Iron 1-1/4 In., Capacity Steel 1 In., Spindle Speed 300 To 2000 Rpm, Number Of Speeds Variable, Chuck Size 1/2 In., Spindle Taper Mt3, Spindle Travel 6 In., Column Dia. 4-1/2 In., Quill Dia. 3 In., Table Work Surface 18-1/8 X 14-3/4 In., Table Slots 5/8 In. W, Base Size 26 X 19 In., Overall Height 77-1/4 In., Overall Width 27 In., Overall Depth 34-1/4 In., Includes Led Readout Minimize

Drafting table adjusts from 0 degrees to 55 degrees This at ... Read more

Drafting table adjusts from 0 degrees to 55 degrees This attractive, adjustable drafting table can be tilted from 0 - Visit Harbor Freight Tools For More Information. Minimize

The Challenge Handy-Drill Paper Drill was designed to bring ... Read more

The Challenge Handy-Drill Paper Drill was designed to bring speed and efficiency to quick-print and on-demand operations. Featuring a hand lever drilling operation, a manual trip side guide, and a heavy duty metal table, the Handy-Drill is a highly efficient and productive drilling machine. The Single Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position. Located around the spindle, the chip collector cups include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced. The back gauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. Features: 2-1/2” lift capacity in 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2"). Machine also available in a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2"). Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position. Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced. Adjustable backgauge stops – The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. Questions? We are here for you. Call us at (866)537-2244. Specifications and Features: ManufacturerChallenge Machinery ModelHandy-Drill Table Size18" x 19" Included Drill Bits5/16" & 1/4" Standard Drill Bits Compatible Drill BitsStyle A 2.5" Challenge Drill BitsAvailable in sizes 1/8" through 3/8" DiameterStandard, Premium, Teflon & Premium Teflon Drill Head OperationManual, Hand Lever Max. Drilling Capacity2.5" Minimum Distance Between Holes3/8", Center to Center Maximum Distance to Side Guide9-7/8" Maximum MarginCenter to Sheet Edge2-1/2" Cuts ThroughPaper Electrical115V, 2.7A, 60Hz; Single Phase, AC Weight / Ship Weight70 lbs. / 90 lbs. Ships ViaMust Ship Via Truck – Click To Request A Quote Dimensions21.2" L x 24" W x 22-3/8" H Quantity/Box1 Drill / Box Product Code04CHLHDRILL List Price$1395 Our PriceCall for Today's Special Price (866)537-2244 * The 2" Handy-Drill requires extra lead time. Call, email, or chat with us live for exact lead time. Minimize

Featuring the exceptional durability of solid steel and cas ... Read more

Featuring the exceptional durability of solid steel and cast iron construction, the RIKON 30-120 13-Inch Drill Press offers the convenience of 16 spindle speeds and large cast iron handle for easy operation. Powerful and easy to use, the 30-120 has a 13-inch swing, and it is ideal for both the hobbyist and professional user.30-120 13-Inch Drill PressAt a Glance:Rugged, user-friendly design with 1/2-horsepower motor for professionals and hobbyistsConvenient rack and pinion table height adjustmentClutch depth stop for easy and accurate settingsExceptional durability--solid steel and cast iron constructionTwo-year warranty13-inch drill press has 16 spindle speeds and is made of solid steel and cast iron. View larger.Replace bits and jigs fast with the easy-to-locate key and key-holder.Powerful 1/2-Horsepower MotorPowerful, smooth, and efficient, the 30-120 owes its robust performance to a 1/2-horsepower motor that provides plenty of torque for whatever material you're drilling. 16 spindle speeds from 200 to 3,630 RPM lend versatility. A clutch depth stop lets you set the drill depth, making the 30-120 particularly helpful for projects requiring repeated drilling.Cast Iron and Solid Steel ConstructionBoasting rugged cast iron and solid steel construction for vibration-free operation, this drill press is built to last. Complete with a cast iron head, tilting table, and base, as well as comfortable solid cast iron handles that will not bend or loosen after repeated use, the 30-120 provides reliable performance job after job, making it an ideal addition to a variety of job sites and shops.Easy-Adjust Table Height, Table Tilt, and Convenient Slot DesignDesigned to be exceptionally easy to use, the 30-120 is packed with helpful features. The table height conveniently adjusts with rack and pinion gears, which means you can make quick adjustments with the simple turn of a handle.It also features a convenient slot design, which makes for fast, easy mounting of jigs, vises, and fixtures. For added convenience and to accommodate different material sizes, the 11-3/16-inch table also tilts 45 degrees right or left and rotates a full 360 degrees.Dimensions and Warranty InformationThe 30-120 has a height of 39 inches, depth of 24 inches, and weighs 121 pounds. It is backed by a two-year warranty.What's in the BoxRIKON 30-120 13-Inch Drill Press with drill press head, arm, table support, table, column assembly, base, two loose hardware bags, chuck, owner's manual, and cast iron handle. Minimize

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Ph ... Read more

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Phase 1, Voltage 115, Hz 60, Amps Ac 15, Capacity Cast Iron 1 In., Capacity Steel 3/4 In., Spindle Speed 145 To 4800 Rpm, Number Of Speeds 16, Chuck Size 0-5/8 In., Spindle Taper 3mt, Spindle Travel 4-1/8 In., Column Dia. 3-5/8 In., Quill Dia. 2 In., Table Work Surface 13-3/8 X 14-3/16 In., Table Slots 1/2 In., Base Size 12.60 X 12.60 In., Overall Height 68 In., Overall Width 18 In., Overall Depth 27.5 In. Minimize

Woodpeckers Drill Press Table features a generous 16" x 23" ... Read more

Woodpeckers Drill Press Table features a generous 16" x 23" x 1" surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2" thick material. Two double-wide T-tracks are embedded and bolted in place from underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-track is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to your drill press, no further adjustment is needed. The 36" fence uses the same double-wide track as the table to give you more stop and accessory mounting options. The fence comes with a simple L stop, and optional flip stops can be added for increased versatility. Mounting hardware is included. Minimize

Floor Drill Press, Spline Drive, Swing 20 In,hp 2, 3 Phase, ... Read more

Floor Drill Press, Spline Drive, Swing 20 In,hp 2, 3 Phase, Voltage 220/440, 6.2/3.1 Amps Ac, Capacity Cast Iron 1 1/4 In, Capacity Steel (in) 1 In, Spindle Speeds Variable, 300-2000 Rpm, Chuck Size 1/2 In Not Included, Spindle Taper Mt3, Spindle Travel 6, Spindle To Table 32 3/8, Max Spindle To Base 44 1/2 In, Column Dia 4 1/2 In, Quill Dia 3, Table Work Surface 18 1/8 X 14 3/4 In, Table Slots 5/8w In, Overall Height 77 1/4 In, Overall Width 27 In, Overall Depth 34 1/4 In, Includes Led Readout Minimize

Floor Drill Press, Swing 15 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 15 In, Motor Hp 1, Voltage 120, Hz 60, Amps 16.0, Capacity Cast Iron 1 In, Rpm Variable 300 To 3000, Rpm Readout, Spindle Travel 5 In, Spindle To Table 25 1/2 In, Max Spindle To Base 47 In, Column Dia 3 In, Table Work Surface 12 7/8 X 16 In, Overall Height 70 1/4 In, Overall Width 20 In, Overall Depth 28 1/2 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Milwaukee This heavy duty unit is built for production dril ... Read more

Milwaukee This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large. 3/4 inch capacity, 11.5 amp motor, 350 RPM. Dual Mount Gear Case/Reverse Mount for tight quarter drilling. Taps up to 1 inch-14 threaded hole. Develops up to 1670 pounds of drill point pressure with a 1 inch steel plate. Minimize

STANDARD MODEL MILL. AND DRILLING TABLE

Floor Drill Press, Spline Drive, Swing 15 In., Motor Hp 1, ... Read more

Floor Drill Press, Spline Drive, Swing 15 In., Motor Hp 1, Phase 3, Voltage 220/440, Hz 60, Amps Ac 6.2/3.1, Capacity Cast Iron 5/8 In., Capacity Steel 1/2 In., Spindle Speed 400 To 5000 Rpm, Number Of Speeds Variable, Chuck Size 1/2 In., Spindle Taper Mt2, Spindle Travel 6 In., Column Dia. 3 In., Quill Dia. 2-1/4 In., Table Work Surface 15 In. X 18 In., Table Slots 1/2 In. W, Base Size 10 1/2 X 15 In., Overall Height 71 In., Overall Width 20 In., Overall Depth 30 In., Includes Led Readout Minimize

Built to last, and full of features that help increase prod ... Read more

Built to last, and full of features that help increase productivity, the RIKON 30-240 20-Inch Floor Drill Press is ideal for professional or do-it-yourself use. Its steel and cast iron construction combines with easy adjustments for powerful, efficient performance. Whether you're working at home or in a commercial shop, the 30-240 gives you more options to get the job done right.30-240 20-Inch Floor Drill PressAt a Glance:Provides powerful, smooth operation for professionals and hobbyists1-horsepower induction motor; 16 spindle speeds (150 to 4,200 RPM)Rack and pinion table height for fast, easy adjustmentsSolid steel and cast iron construction for exceptional durabilityTwo-year warranty1/3-horsepower, 20-inch floor drill press for professionals or do-it-yourselfers.View larger. Set clutch depth-stop for multiple precision drills. Efficient 1-Horsepower MotorThe 30-240 owes its efficient performance to a robust 1-horsepower TEFC motor, which ensures consistent, controlled power. It also features a 20-inch swing and provides 16 spindle speeds from 150 to 4,200 RPM. For added flexibility, its head tilts 45 degrees right or left--a great feature when you're angle drilling.Table Height Adjusts EasilyTo give you the versatility you need to tackle a range of jobs, the 30-240 features rack and pinion table height, which makes adjustments a simple matter of turning the large handles. You'll never have to worry about breaking or bending the handles as you work--they're made of solid cast iron for exceptional durability.Efficient Design for Streamlined WorkTo ensure precision and to save you time, the 30-240 also offers the convenience of a clutch depth stop, which makes it a snap to quickly set the drill depth. This feature is particularly helpful during repeated drilling. And to maintain an organized space where everything you need is at your fingertips, the 16-1/2 by 18-3/4-inch table includes slots for quick mounting of your jigs, vises, and figures.Solid Steel and Cast Iron ConstructionDesigned to be reliable year after year, the 30-240 boasts the durability of solid steel and cast iron construction. The rugged design and materials allow for vibration-free performance, which helps to improve accuracy and consistency.Dimensions and Warranty InformationThe 30-240 has a height of 68 inches, weighs 318 pounds, and is backed by a two-year warranty.What's in the BoxRIKON 30-240 20-Inch Floor Drill Press with table, chuck, one bag of loose parts, drill press head, feed handle, column assembly, base, one bag of belts, and owner's manual. Minimize

Floor Drill Press, Spline Drive, Swing 15 In, Motor Hp 1, 1 ... Read more

Floor Drill Press, Spline Drive, Swing 15 In, Motor Hp 1, 1 Phase, Voltage 115/230, 16.0/8.0 Amps Ac, Capacity Cast Iron 5/8 In, Capacity Steel (in) 1/2, Spindle Speeds Variable, 400-5000 Rpm, Chuck Size 1/2 In, Spindle Taper Mt2, Spindle Travel 6, Spindle To Table 41, Max Spindle To Base 47 1/2 In, Column Dia 3 In, Quill Dia 2 1/4 In, Table Work Surface 12 1/2 X 14 1/2 In, Table Slots 1/2w In, Overall Height 71 In, Overall Width 20 In, Overall Depth 30 In, Includes Led Readout Minimize

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

The Lassco Wizer Spinnit® FM-2 Single Spindle Paper Drill o ... Read more

The Lassco Wizer Spinnit® FM-2 Single Spindle Paper Drill offers hands-free, low maintenance, and efficient operation, providing maximum production at an affordable price. Drill through hundreds of sheets of paper at once with a 2" drilling capacity. The FM-2 also features a mechanical lift table that has a right to left and left to right traversing feature. This lift table brings the paper up to the spindles. The FM-2 is the lowest cost floor model Paper Drill on the market. It requires low maintenance and operates efficiently. The FM-2 Drill is compatible with Style A 2" Drill Bits which are available in diameter sizes ranging from 1/8" to 1/2", and in styles including standard, premium, Teflon and premium Teflon. Questions? We are here for you. Call us at (866)537-2244. Specifications and Features: ManufacturerSpinnit® ModelFM-2 Table Size15" x 32" Table Height35-1/2" Included Drill Bits5/16" Standard Drill Bit Drill Capacity2" Compatible Drill BitsStyle A 2" Spinnit & Challenge Drill Bits. Available in sizes 1/8" through 1/2" Diameter. Standard, Premium, Teflon & Premium Teflon. Drill Head OperationManual, Foot Pedal Number of Spindles1 Spindle Table Travel14" Maximum Throat Depth3-3/4" Cuts ThroughPaper Horse Power1/4 Hp Electrical115 V Weight / Ship Weight150 lbs. / 247 lbs.Ships via Truck (Click below for quote) Ship Dimensions48" x 40' x 60" Quantity/Box1 Drill / Box Product Code04DRILL2 List Price$2,295 Our PriceCall for Today's Special Price (866)537-2244 Minimize

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz 60, Amps 15.0, Capacity Cast Iron 1 In, Rpm Variable 300 To 3000, Rpm Readout, Spindle Travel 5 In, Spindle To Table 27 1/2 In, Max Spindle To Base 47 In, Column Dia 4 In, Table Work Surface 18 5/8 X 16 3/4 In, Overall Height 71 In, Overall Width 22 In, Overall Depth 32 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize