|
|
Battery Powered Automatic Strapping Tool with 5/8" Strappin
... Read more
Battery Powered Automatic Strapping Tool with 5/8" Strapping Width Battery powered automatic strapping tool tensions, seals and cuts strapping in one easy operation. Use in automatic mode or in manual mode that permits custom tension adjustment. Accepts polypropylene and polyester strapping in 5/8" width. Maximum strap tension is 530 lbs. Includes two 14.4V Bosch Ni-MH batteries and charger. Applies 300 straps of polypropylene or 160 straps of polyester strapping with each charging cycle.
Minimize
|
|
Go To Store
|
|
|
Valley Craft Self Powered Maxi-Grip Standard Jaws Self-Pow
... Read more
Valley Craft Self Powered Maxi-Grip Standard Jaws Self-Powered Hydraulic Maxi-GripTM with Standard Jaws is a single-function grip designed to increase efficiency of basic moving, stacking and palletizing actions. This unit has no dumping functions, but is optimal for fast and effective warehousing drum inventories. Equipped with built-in, 12-volt, battery-operated Power-Pak and self-contained hydraulics. Standard Jaws are for use with steel drums and cylinders 18-28 in. in dia. and measure 6 x 18". Fork tubes measure 2.5 x 6.5 x 42" and measure 13" between the forks. 2000 lb. capacity. Note: Batteries Are Included. 60.00 L. 42.00 W. 21.00 H.
Minimize
|
|
Go To Store
|
|
|
Valley Craft Self Powered Maxi-Grip Giant Jaws Self-Powere
... Read more
Valley Craft Self Powered Maxi-Grip Giant Jaws Self-Powered Hydraulic Maxi-GripTM with Giant Jaws is a single-function grip designed to increase efficiency of basic moving, stacking and palletizing actions. This unit has no dumping functions, but is optimal for fast and effective warehousing drum inventories. Equipped with built-in, 12-volt, battery-operated Power-Pak and self-contained hydraulics. Giant Jaws are for use with steel and fiber drums 18-28 in. in dia. and measure 18 x 18". Fork tubes measure 2.5 x 6.5 x 42" and measure 13" between the forks. 2000 lb. capacity. Note: Batteries Are Included. 60.00 L. 42.00 W. 21.00 H.
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Power Feed Floor Machine , 100'x3/4"
... Read more
General Pipe Cleaners Power Feed Floor Machine , 100'x3/4" Cable, 100'x1/2" Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2" cable, a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4", 5/8", and 1/2" cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4" or 5/8" cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel mounted on the handle to help you lift the machine into a truck. This lean but tough machine can really take a beating, with extra bracing at key stress points. The drum is supported front and back for longer bearing wear and smoother operation. The large drum has a see-through inner cage, so that the operator quickly can tell how much cable is left in the drum. Standard equipment also includes a Ground Fault Circuit Interrupter and an "Off" position on the reverse switch, so the machine won't start if the pedal is pressed accidentally. 32.00 L. 28.75 W. 23.00 H.
Minimize
|
|
Go To Store
|
|
|
8000W Pro Series Portable Generator Power All Your Jobsite
... Read more
8000W Pro Series Portable Generator Power All Your Jobsite Tools. The ultimate tool power generator for the job site Powered by a commercial grade Briggs & Stratton Vanguard V-Twin OHV engine for extreme conditions. This Pro Series generator is built contractor tough for even the most demanding jobs. Internal Trickle Charger & Float Charge Jack Keep battery fresh during storage. Low Oil Shutdown Significantly reduces the chance of engine damage due to insufficient lubrication. Pressurized Lubrication Helps keep vital engine parts operating smoothly. Power Surge Alternator Produces up to 60% more surge wattage to start multiple motor-driven tools or appliances simultaneously. Super Lo-Tone Muffler Reduces noise and minimizes vibration for unobtrusive operation in close quarters. 4 Extra Large Premium Wheels For ultimate mobility over rough terrain. GFCI Protected Control Panel Protects generator circuits from overload. Briggs & Stratton Vanguard V-Twin OHV Engine Delivers premium power and maximum performance. Push Button Electric Start Effortless Electric Start provides easy one touch starting. Automatic Voltage Regulation Helps maintain steady voltage. Spin On Oil Filter Effectively filters and cleans oil for prolonged engine life. Automatic Idle Control Saves fuel and reduces noise by idling down when not in use. Key Features: 8000 running watts/10,000 starting wattsVanguard V-twin OHV engineUp to 7 hours run time at 50% load Generator sales are final. 31.70 L. 29.70 W. 27.40 H.
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Sectional Machine (No Cable) Here's
... Read more
General Pipe Cleaners Sectional Machine (No Cable) Here's a sectional cable machine that drives 7/8" and 5/8" sections - or even 5/16" cables for small drain work. You switch from 7/8" to 5/8" and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables. The I-95 gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there's no additional torque build up. You also use the drive handle to carry the machine. And when it's in position on the job, its four point base gives it rock-solid stability. A cutter holder is attached to the back of the I-95, so your cutting heads are always with the machine. A Ground Fault Circuit Interrupter is standard equipment. Clear 1-1/2" - 2" lines with 5/16" x 25' cable. Clear 2" - 3" lines up to 125 feet long with 5/8" x 7-1/2' sections, or 4" lines up to 150 feet long with 7/8" x 15' sections. 17.50 L. 17.00 W. 16.00 H.
Minimize
|
|
Go To Store
|
|
|
4000W Pro Series Portable Generator Tool Power. Ideal for s
... Read more
4000W Pro Series Portable Generator Tool Power. Ideal for small tool power on the job site Powered by a commercial grade Briggs & Stratton Vanguard OHV engine for extreme conditions. Built with contractor specific features to perform well on the jobsite. Low Oil Shutdown Significantly reduces the chance of engine damage due to insufficient lubrication. Pressurized Lubrication Helps keep vital engine parts operating smoothly. Power Surge Alternator Produces up to 60% more surge wattage to start multiple motor-driven tools or appliances simultaneously. Super Lo-Tone Muffler Reduces noise and minimizes vibration for unobtrusive operation in close quarters. 4 Extra Large Premium Wheels For ultimate mobility over rough terrain. GFCI Protected Control Panel Protects generator circuits from overload. Automatic Voltage Regulation Helps maintain steady voltage Automatic Idle Control. Saves fuel and reduces noise by idling down when not in use. Key Features: 4000 running watts/5000 starting wattsVanguard OHV engineUp to 14 hours run time at 50% loadIdeal for power tools including table saw, miter saw, belt sander and halogen work light Generator sales are final. 30.10 L. 26.10 W. 23.90 H.
Minimize
|
|
Go To Store
|
|
|
ALL-POWER PORTABLE GENERATORS All-Power Gasoline Powered
... Read more
ALL-POWER PORTABLE GENERATORS All-Power Gasoline Powered Generator Includes A Wheel Kit For Easy Mobility Where You Need It. Powerful 6.5 HP, 4-cycle OHV air-cooled motor with recoil start runs 8 hours at 1/2 load. Unleaded 4 gallon fuel capacity. Provides 3,500 watt peak performance with 3,000 watt rating. Includes two 120V outlets, one 120/240V twist-lock outlet and a 12V DC outlet. Durable steel framing for extra strength and protection. Includes 2 non-marring feet for stability. Moves easily on two 8 semi-pneumatic wheels. EPA approved. Generator sales are final.
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Sectional Machine w/ (6) 7-1/2'x5/8"
... Read more
General Pipe Cleaners Sectional Machine w/ (6) 7-1/2'x5/8" & (5) 15'x7/8" Cables, Cable Carrier, Cutter Set & Tool Box The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drainwork, slip on a drum that holds smaller cables. To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle,and the Root 66 starts spinning the cable at 400 rpm. The cable stops rotating as soon as you lift the handle, so there's no additional torque buildup. When using a drum for small drain work, the drum stops turning when you lift the handle to the neutral position. The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A Ground Fault Circuit Interrupter is standard equipment. Store cutters in the included tool box. 17.00 L. 16.00 W. 14.00 H.
Minimize
|
|
Go To Store
|
|
|
|
|
from $2,256
(1 store)
See Details
|
|
|
STRETCH WRAP MACHINE Stretch wrapping machinery provides
... Read more
STRETCH WRAP MACHINE Stretch wrapping machinery provides an affordable solution to wrap loads and pallets quickly and productively. Stretch wrap machines offer adjustable film stretch leveling to match load holding requirements. Heavy duty all steel construction. 65 dia. x 2-5/8H smooth turntable top allows easy pallet truck loading. Turntable adjusts from 0-12 RPM and has a 4000 lb. load capacity. Stretch wrapping equipment features 1/2HP AC, V-belt turntable motor with digital readout display. Features 3 locking ramp positions. 120V, 15 amp power. Wraps loads 56W x 56D x 80H. Accepts stretch wrap rolls 10 diameter and 10-20W. Features push button operation and variable carriage speed dial. Optional Approach Ramp allows operators to load and unload stretch wrapping machine with a pallet truck. 3 Year Limited Warranty.
Minimize
|
|
Go To Store
|
|
|
|
|
from $1,631
(1 store)
See Details
|
|
|
Room Air Conditioner Motor, Shaded Pole, Open Air-over, 1/1
... Read more
Room Air Conditioner Motor, Shaded Pole, Open Air-over, 1/10 Hp, 1000 Rpm, Number Of Speeds 5, 208-230 Volts, 2.3-2.3 Full Load Amps, 42y Nema Frame, Body Diameter 5 In, Service Factor 1.0, 60 Hz, Ring/stud Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 11 And 10 1/2 In, Ccwle Rotation, Ambient 40 C, Insulation Class B, Resilient Ring Diameter 2 1/4 In, Length Less Shaft 4 In
Minimize
|
|
Go To Store
|
|
|
GLOBAL OFFICE PARTITIONS WITH MODULAR WIRE MANAGEMENT RACEW
... Read more
GLOBAL OFFICE PARTITIONS WITH MODULAR WIRE MANAGEMENT RACEWAY Receptacle Removal Tool Receptacle Removal Tool is required when removing receptacles from power box. Handheld device allows easy receptacle detachment from power box. 3.25 L. 2.50 W.
Minimize
|
|
Go To Store
|
|
|
|
|
from $1,971
(1 store)
See Details
|
|
|
|
|
from $5,028
(1 store)
See Details
|
|
|
General Pipe Cleaners Electric Floor Model Machine w/ Power
... Read more
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x1/2" Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8" semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4" to 4" in diameter with just one machine. The drum easily holds 75 feet of 3/8" or 1/2" cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum (available separately), you can handle smaller drain lines. The power cable feed makes a lot of tough jobs go much easier. The drum is a snap to remove,taking less than a minute. Of course the XP comes with an air foot pedal and Ground Fault Circuit Interrupter for safety, and General's patented Flexicore wire rope center cable for durability. 28.25 L. 24.50 W. 18.50 H.
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Sectional Machine w/ (5) 15'x7/8" Cab
... Read more
General Pipe Cleaners Sectional Machine w/ (5) 15'x7/8" Cables, Cable Carrier, Cutter Set & Tool Box The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drainwork, slip on a drum that holds smaller cables (available separately). To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle,and the Root 66 starts spinning the cable at 400 rpm. The cable stops rotating as soon as you lift the handle, so there's no additional torque buildup. When using a drum for small drain work, the drum stops turning when you lift the handle to the neutral position. The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A Ground Fault Circuit Interrupter is standard equipment. 34.00 L. 30.50 W. 23.00 H.
Minimize
|
|
Go To Store
|
|
|
POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve C
... Read more
POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve Conveyors transport products of various sizes and shapes while maintaining proper product orientation. Durable black PVC belt is used in light duty package handling industries, as well as rough, abrasive environments. 10 gauge rolled, welded, and painted steel frame and slider bed. Standard 60 ( 5) FPM non-reversing conveying speed (measured at centerline radius). Includes permanent leg supports for 34" to 38" conveying surface height. Tapered and lagged drive and tail pulleys. Sealed and pre-lubricated mounted bearings. Totally enclosed 115/230V, 60Hz single phase motor with 10 ft. power cord and on/off switch for 115V use. Drive Motor is located at discharge (exit) end to pull product through curve. Optional Variable Speed Motor is available offering 12 to 60 ( 5) FPM. Other outside radii, belt widths and voltages are available; call for information. Note: Right Hand (Clockwise) curve. Left Hand (Counter Clockwise) curve is also available using curve suffix (L) Left Hand.
Minimize
|
|
Go To Store
|
|
|
POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve C
... Read more
POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve Conveyors transport products of various sizes and shapes while maintaining proper product orientation. Durable black PVC belt is used in light duty package handling industries, as well as rough, abrasive environments. 10 gauge rolled, welded, and painted steel frame and slider bed. Standard 60 ( 5) FPM non-reversing conveying speed (measured at centerline radius). Includes permanent leg supports for 34" to 38" conveying surface height. Tapered and lagged drive and tail pulleys. Sealed and pre-lubricated mounted bearings. Totally enclosed 115/230V, 60Hz single phase motor with 10 ft. power cord and on/off switch for 115V use. Drive Motor is located at discharge (exit) end to pull product through curve. Optional Variable Speed Motor is available offering 12 to 60 ( 5) FPM. Other outside radii, belt widths and voltages are available; call for information. Note: Right Hand (Clockwise) curve. Left Hand (Counter Clockwise) curve is also available using curve suffix (L) Left Hand.
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Hand Held Power Feed Machine w/ 25'x5
... Read more
General Pipe Cleaners Hand Held Power Feed Machine w/ 25'x5/16" Down Head Cable When working under sinks or in other awkward places, the Power-VeeTM is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line.It's easy to use. To feed the cable, start the Power-Vee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8" cable at 16 feet per minute. The Power-Vee handles 1/4" through 3/8" cables without any need for adjustment. Squeezing the feed lever brings the rollers into solid contact with the cable, with minimum effort by the operator. Our Dyna-ThrustTM bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Power-Vee's durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore - with an integral wire rope center. Nobody makes cables like General.The Power-Vee includes Quick-Change Cable Cartridges and tough left-wound Flexicore wire rope center cables. 26.00 L. 11.25 W. 11.25 H.
Minimize
|
|
Go To Store
|
|
|
|
|
from $4,439
(1 store)
See Details
|
|
|
WESCO BATTERY POWERED COUNTER BALANCED STACKER Use any
... Read more
WESCO BATTERY POWERED COUNTER BALANCED STACKER Use anyplace where a typical Lift Truck's Straddle Legs may interfere with the Job! Counterbalanced stacker is ideal for positioning dies, feeding materials into machinery or loading/unloading trucks, as the lack of protruding outrigger legs allows the unit to approach the work area without interference. Proven battery powered hydraulic pump lifts and lowers cargo via a hand-held remote control to ensure operator safety. Maintenance-free 12V battery, 10 amp battery charger, voltmeter and keyed on/off switch are standard. Lift truck may be operated on AC current while recharging. Electric stacker includes a floor lock for stationary positioning and mast safety screen to protect operator. 1 Year Limited Warranty. Powered Lift & Drive Model includes a high-torque drive motor that provides effortless forward/reverse movement of the stacker. Ergonomic handle controls variable speed with left or right hand and offers an auto-reverse safety belly button switch. 180 hinged design allow precise steering in confined spaces. Spring-loaded mechanism automatically compensates for uneven floors ensuring drive wheels maintain contact with the floor. Twin maintenance-free batteries provide power for propulsion and lift. Note: Stackers require appropriate counter weights (sold separately) to obtain lift capacity. Order the proper weight kit for your planned load.
Minimize
|
|
Go To Store
|
|
|
|
|
from $4,469
(1 store)
See Details
|
|
|
|
|
from $1,716
(1 store)
See Details
|
|
|
|
|
from $130
(1 store)
See Details
|
|
|
|
|
from $931
(1 store)
See Details
|
|
|
XP8000E 8000W Portable Generator-CSA The XP8000E generat
... Read more
XP8000E 8000W Portable Generator-CSA The XP8000E generates up to 12,000 surge watts of electricity to power up any essential appliance or tool. Its versatility allows for functional use at almost any outdoor location. Never-flat wheels and locking fold-down handle for increased mobility and smooth portability. Integrated lifting eye for seamless transport and security. Features the Generac 410cc OHVI engine with low-oil shut off to prevent engine damage. Has the ability to operate up to 12 hours of power at half load with a 9-gallon steel fuel tank and gauge. Optional electric start feature. Includes full-wrap, 1" hardened steel tube cradle for added protection. Quiet operation from its low tone muffler. Circuit breaker protected outlets and CGCI outlet protection. True PowerTM technology - less than 5% THD. CSA compliant. - CSA compliant - Not for sale in California - Generator sales are final 38.00 L. 23.00 W. 25.00 H.
Minimize
|
|
Go To Store
|
|
|
SELF-PROPELLED ELECTRIC POWERED TUGGER Electric Load P
... Read more
SELF-PROPELLED ELECTRIC POWERED TUGGER Electric Load Puller Is Designed To Reduce Push/Pull Injuries And Increase Productivity. Ergonomic power tug pulls a variety of single or multiple four-wheeled carts safely and efficiently with minimal effort. Battery operated puller is ideal for healthcare, food service, hospitality and material handling applications. Motorized tow device is powered by a 24V DC transaxle drive motor, and includes two 22 amp/hr sealed lead acid batteries with integral battery charger and battery charge indicator. Mobile equipment tug features an ergonomic control handle which includes horn, key switch, lift button, throttle and 2-speed control (2-1/2 & 4 mph). Powered tugger rolls smoothly on 8-" diameter non-marring, flat free tires. Rain-proof (IP-54 rating). Note: Hitch Ends and Hitch Receivers are sold separately. Male Hitch End fastens easily to docking receptacle on the Tug. To tow one cart, order one Male Hitch End and one Clamp-on Hitch Receiver. To tow multiple carts, order Male and Female Hitch Ends and two Clamp-on Hitch Receivers per cart to be towed. Clamp-on Hitch Receivers fasten to the base of most wheeled carts allowing you to attach the Hitches to your equipment./> /
Minimize
|
|
Go To Store
|
|
|
General Pipe Cleaners Electric Machine w/ Power Feed & 50'x
... Read more
General Pipe Cleaners Electric Machine w/ Power Feed & 50'x5/16" Cable Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures, and messy floors. The guide tube doubles as a feed control. It allows operator to feed or retrieve the cable with a simple flick of the wrist. The drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through strainers. The Drain-Rooter PH can be operated in both vertical and horizontal positions to get closer to the drain opening. A quick-change cartridge system allows you to switch to different diameter cables without pulling the old cable out of the drum. 24.00 L. 15.88 W. 15.50 H.
Minimize
|
|
Go To Store
|