> Tools and Accessories > band flex/store amazon marketplace 9689

  Aurora Flex Solar 3/4" Stainless Steel Piping with 3/ ... Read more

  Aurora Flex Solar 3/4" Stainless Steel Piping with 3/4"  EPM insulation   Stainless Steel SUS 304 3/4" twin piping with high temp 3/4" EPDM insulation and weather proof coating. Includes silicon wire for temperature probe. Guarantees a professional installation in 1/4 the time it would take to do a copper installation. No leaks and no soldering! 50 feet per roll.   FEATURES   No Soldering- Leak FREE 3/4" 304 Stainless Steel pipes   Installation Procedure  Step one:Cut the hose to your desired length with cutter Step two:Put a fitting onto the solar hose, put one end into flange tool NOTE Flange tool sold seperately Step three:Use a hammer to flatten the end of the hose Step four:squeeze on the Solar hose stainless steel Circlip on Step five:Insert high Temperature gasket Step six:Tighten with a crescent wrench until gasket is tightly sealed  High Pressure/ High Temperature Fittings  No. Item Material 1 Nut Brass 2 Metal Hose SUS304,SUS316L 3 Gasket 350? High-temperature resistance seal 4 Cir-Clip Stainless Steel SUS304   Technical specifications INSULATION Material High quality synthetic elastomer (EPDM based) with a complete closed-cell structure. Temperature range From -50 °C to +150 °C     (up to 175 °C operating intermittent.) Flammability :actual burning behavior DIN 4102-B2 self-extinguishing, no fireball drops, limited fire spreading Water Vapor permeability u>3000 Thermal Conductivity W/(m.K) Minimize

Barracuda Box Lid, Universal, Width (in.) 17-1/2, Depth (in ... Read more

Barracuda Box Lid, Universal, Width (in.) 17-1/2, Depth (in.) 23-1/2, Height (in.) 1-1/2, Polypropylene, Gray, Matte Finish, Yes, Molded In Handles, Stack And Nest Design, For Use With 3fzc6, 3fzc7 Minimize

Quality That You Can Trust! These Professional Soft Flex® F ... Read more

Quality That You Can Trust! These Professional Soft Flex® Flush Cutters are manufactured by Soft Flex® Company for our top of the line, bead stringing wire: Soft Flex® Wire and Soft TouchTM Wire. This cutter will cut all 4 of our diameters: .010, .014, .019 and .024. They will also cut stainless steel, tungsten and nickel in diameters up to 1.00mm. The blade exceeds 64 on the Rockwell Hardness Scale. Each cutter is hand tested and will get up to about half a million cuts! These top quality cutters are manufactured in the USA. They are constructed of high grade alloy steel with ergonomic foam cushion handles and lap-joint. The Soft Flex Company Tool Line has handles designed for transferring force from the operator to the point of operation in a highly ergonomic manner. Please note: these cutters are designed for use on beading wire and soft metals, such as sterling silver or copper. We do not suggest attempting to cut hard wire, such as Memory Wire, with these cutters as it will harm the blades of the cutter. Minimize

Fender Washer, Thick, 18-8 Stainless Steel, Plain Finish, F ... Read more

Fender Washer, Thick, 18-8 Stainless Steel, Plain Finish, Fits Bolt Sizes 1/2 In, Inside Dia 17/32 In, Outside Dia 2 In, Thickness 1/4 In, Thickness Tolerance +/-0.025 In, Rockwell Hardness B70, For Use With Screws And Studs Minimize

Fender Washer, Thick, Steel, Zinc Plated, Fits Bolt Sizes 1 ... Read more

Fender Washer, Thick, Steel, Zinc Plated, Fits Bolt Sizes 1/2 In, Inside Dia 17/32 In, Outside Dia 2 In, Thickness 1/4 In, Thickness Tolerance +/-0.025 In, Rockwell Hardness B49, Load Distributing, For Use With Construction, Machinery, Package 5 Minimize

With the model ASM1 you can automatically set bandsaws up t ... Read more

With the model ASM1 you can automatically set bandsaws up to 2" wide with tooth spacing from 1/16" to 1". BANDSAWS: A Precision saw grinder for sharpening wood, metal and plastic cutting bandsaws from 3/8" to 2" wide. Automatically feeds and trace grinds each tooth from a master cam which will handle regular, skip and hook tooth profiles. Gears, cams and main moving parts run in a gear box of grease, insuring maintenance-free long life. CIRCULAR SAWS: The model ASM1 is fast, accurate and a big time saver for sharpening circular saws with straight grinds. These are generally aluminum, plastic or plywood type saws. They will handle blades up to 20" in diameter with hook angles from 0° to 20°. SPECIFICATIONS Standard Blade Widths 3/8" to 2" Motor 220 volt, 1 phase, 3450 rpm Index Capacity Tooth spacing 1/16" to 1" Bandsaw Types Regular, Skip and Hook Hook Angles 0° to 20° Tooth Index Speed 60 teeth per minute Bevel Angle Straight Grind Only Circular Saw Diameter Capacity 4 1/2" to 20" Minimize

BANDSAWS: A Precision saw grinder for sharpening wood, meta ... Read more

BANDSAWS: A Precision saw grinder for sharpening wood, metal and plastic cutting bandsaws from 3/8" to 2" wide. Automatically feeds and trace grinds each tooth from a master cam which will handle regular, skip and hook tooth profiles. Gears, cams and main moving parts run in a gear box of grease, insuring maintenance-free long life. CIRCULAR SAWS: The model ASM2 is fast, accurate and a big time saver for sharpening circular saws with straight grinds. These are generally aluminum, plastic or plywood type saws. They will handle blades up to 20" in diameter with hook angles from 0° to 20°. SPECIFICATIONS Standard Blade Widths 3/8" to 2" Motor 220 volt, 1 phase, 3450 rpm Index Capacity Tooth spacing 1/16" to 1" Bandsaw Types Regular, Skip and Hook Hook Angles 0° to 20° Tooth Index Speed 60 teeth per minute Bevel Angle Straight Grind Only Circular Saw Diameter Capacity 4 1/2" to 20" Minimize

Band Saw Visorguard Provides Complete Protection Between Cu ... Read more

Band Saw Visorguard Provides Complete Protection Between Cutting Blade And Operator's Hands And Eyes. Features Include: "L" Shaped Lexan Shield, 6" H X 6" W X 4" D. Easy Position Handle. Adjustable Tension 9" Long Flexbar Arm Permits Correct Setting Of Guard For Each Setup. Includes Vertical Angle Mounting Bracket With 11" Of Height Adjustment. Kit Includes Mounting Screws And Self Locking Nuts. Simply Drill And Tap 2 Holes And Install. Installs On Most Band Saws With 18" Maximum Throat Height. Optional Extra-Long Vertical Angle Bracket Assembly Available For Larger Throat Height Machines. Minimize

Northern Industrial Portable Band Saw features needle beari ... Read more

Northern Industrial Portable Band Saw features needle bearing mounted spindle and 3 bearing blade guides for smooth, accurate cuts. Lightweight for easy transport to the job site. Cordless: No, Volts: 120, Variable Speed: Yes, Cutting Capacity (SFPM): 0 - 230, Cutting Depth at 90deg (in.): 4, Blade Size L x W x Thickness (in.): 44 7/8 x 1/2 x .025 Minimize

A set of Flexcut's signature razor sharp steel blades, conf ... Read more

A set of Flexcut's signature razor sharp steel blades, configured for today's power carving tools, that will have you working less and carving more. As great as Flexcut tools work with the power off, just imagine what they'll do with it on. This 4 piece set contains tools for smaller carving and detailing. The RG range of reciprocating gouges are compatible with most reciprocating power tools, and require no adapters for the following machines: Proxxon, Foredom, Wecheer, Ryobi and MasterCarver. Made in USA. Set Includes: #3 x 3/8" Sweep (RG305); #5 x 5/16" Sweep (RG306); 70 Deg. x 1/4" V-Part (RG307); and #11 x 1/8" Sweep (RG309). Minimize

Please visit our website for more details: http://www.ecowe ... Read more

Please visit our website for more details: http://www.ecowelder.com/ Multi-Functionality: Multiplaz 3500 is capable of welding all common metals: steels, cast iron, copper, aluminum, bronze, brass and even titanium in argon gas environment. During the welding process the device consumes a mixture of 55% alcohol and 45% water. The plasma arc welds steel plates with thickness from 0.118? (approx 1/64? or 28 gauges). It penetrates 3/8? (000 gauges) deep into any metal. As a result, the use of beveling technique makes it possible to weld even thicker materials. Multiplaz 3500 is capable of cutting any metal and other non-conductive materials, such as: quartz, cement, concrete, ceramic tile, bricks and more. During the operation process, it consumes only water and can cut 3/8? deep. Cost-Effectiveness: Single phase 110/220V use requirement underscores its low electricity consumption. Additionaly, Multiplaz 3500 operation does not require gas bottles with propane, nitrogen, acetylene or oxygen. It uses only water for cutting, and a mixture of water and alcohol for welding, providing even lower running costs. Portability: Complete kit weighs only 32 pounds and comes with a comfortable shoulder bag that is easy to carry around. Eco-Friendly Operation Unlimited Duty Cycle: Designed to perform 24 hrs a day, 365 days a year at its maximum capacity, pausing briefly at 20 minutes intervals only to replenish working fluid in the torch. It is perfect for both welding professionals and beginners. The device comes with DVD (in English, Spanish, Chinese, Russian and German) as well as written manuals. With just 15 hours of training and practice you will become proficient in the device use. It takes even less time to know the product inside and out for professionals. No certification is required. It is that easy to use!!! Minimize

The indexing attachment offers a way to divide a circle int ... Read more

The indexing attachment offers a way to divide a circle into any number of divisions for operations like milling flats on a bolt head, cutting teeth on a gear or splines on a shaft or drilling multiple holes at regular intervals around a circle. The head has a lever that indexes into a detent at 5° increments. For divisions not divisible by 5° a clever system is used whereby the total travel of a rack gear is measured for one complete revolution of the head. The length is then divided on an electronic calculator by the number of desired divisions. Linear travel of the rack gear can then be measured with the depth rod of a caliper for each increment. The spindle nose accepts standard Sherline ¾-16 and #1 Morse accessories. A tailstock is also provided for holding parts between centers. A section of steel dovetailed material supports both the dividing head and the tailstock. A faceplate and dead centers are also included. The tailstock accepts standard Sherline #0 Morse tailstock accessories. (For those who prefer a more expensive but also more versatile way of doing dividing, see the rotary table, P/N 3700.) Designed for use on a Sherline mill but could be used in other milling and drilling machines with slight modification to the hold-down t-nuts. Minimize

Insertion tube diameter - 4 mm (0.16"), Length - 175 mm (7" ... Read more

Insertion tube diameter - 4 mm (0.16"), Length - 175 mm (7"). Angle/ Direction of View (DOV) - 0°. Field of View (FOV) - 50°. Light post connection - ACMI, STORZ, WOLF. 32mm standard round rigid scope Eyepiece. Longer battery life due to LED technology of the the LED light source, that consumes way less power than a halogen lamp unit. MEDIT's Rigid Borescopes are computer designed and manufactured to comply with up to date standards for a wide range of industrial applications. * Rigid Borescopes provide clear, bright images for any standard industrial application. * The resolution and image quality are crystal clear because of hight quality glas optics used in our scopes. * Our scopes can be used in wide range of applications (aviation, machinery, automotive, engine inspection, electrical, piping, locksmith, and many other applications) there rigid insertion tubing of scope is acceptable and most welcome. * Please notice also, if you have choice between flexible fiberscope or rigid borescope, the last should be given priority, because of its image quality and handiness. Optical system: Rod Lens Minimize

The Flexbar Lexan Latheguard: Prevent Accidents With Latheg ... Read more

The Flexbar Lexan Latheguard: Prevent Accidents With Latheguard. Clear Lexan, Semi-Circular Wrap-A-Round Guards Heavy Duty Cast Mounting Bracket Supplied. Heavy Duty Chrome-Plated Extension Tube And Hardware. Ready To Mount; All You Do Is Affix Mounting Bracket With Two Screws. Back Of Shield Is Reinforced With Plated Wire-Form Housing. Locks In Swing Away Or Functional Positions. Accepts 3 Or 4-Jaw Chucks. Information And Specifications Hints, For Selecting The Correct Latheguard! The Chuck Diameter Being Used On Your Lathe Makes For A Good Formula. Utilize Dimension "A" And Other Dimensions Given In Chart Shown Below. On Lathes With Center Heights Of 7 Inches Or More There Is A Significant Variation In The Diameter Of A 3-Jaw As Against A 4-Jaw Chuck. It May Be Necessary To Install The Next Larger Latheguard To Accomodate For The 4-Jaw Chuck. Keeping A Double Bracket (No. 13071) On The Lathe Makes It Possible To Switch Your Latheguard From Small To Larger Size And Vice Versa, In One Minute. Neither Razor-Sharp Chips Nor Broken Tools Bits Will Penetrate The Lexan Shield. Model No. 13061 Suggested Lathe Size Is 12 To 16 For Use With Chucks Up To 12" Diameters. Minimize

Penetrating Lubricant Containing PTFE PROD.# 0174 BENEFI ... Read more

Penetrating Lubricant Containing PTFE PROD.# 0174 BENEFITS : Zep 45 is an aerosol penetrating lubricant fortified with friction-reducing substances, and a fluorotelomer dispersion. Zep 45 penetrates rapidly to loosen parts that are frozen due to wear, corrosion, and heavy grease or grime build-up. Zep 45 provides excellent and long lasting lubrication to moving parts. Micron size particles work like thousands of tiny ball bearings to dramatically reduce friction and wear. Zep 45 deposits a protective film to retard corrosion, prolong the life of machinery, and reduce down-time. The solvent action of Zep 45 removes accumulations of grease and grime from surfaces to allow contact with the lubricating, protective film. The lubricating film remains effective over a wide temperature range (from minus 55 degrees Fahrenheit to 475 degrees Fahrenheit.). Zep 45 is excellent for use on industrial machines, business machines, motor shafts, guns, sports equipment, shop tools, saws and drills, electric motors, vending machines, locks, hinges, rollers bearings, conveyors, pulleys, nuts and bolts, all rusted and corroded parts. Use on any surface that slips, slides, rubs, rolls, moves, turns, twists, or pivots. Minimize

Fluke 360 AC Leakage Current Clamp Meter Leakage Current Cl ... Read more

Fluke 360 AC Leakage Current Clamp Meter Leakage Current Clamp Meter Includes: 3 year warranty Fluke 360 AC Current Clamp Meter Soft carrying pouch Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese The Fluke 360 leakage tester is an accurate solution for leakage current measurement meter. Designed for non-invasive measurements of insulation conditions, perform tests without powering down the installation or disconnecting equipment. The Fluke 360 AC Leakage Current Clamp Meter features a unique jaw design that eliminates the influence of adjacent current conductors, while minimizing the effects of external magnetic fields, even at low currents. allowing users to perform accurate and reliable tests in crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. Minimize

For construction, roofing, agricultural, manufacturing and ... Read more

For construction, roofing, agricultural, manufacturing and industrial application. Use to coat and rustproof all metal surfaces on roofs; seal and waterproof concrete, brick, block or stone surfaces on roofs. Seal wood roof surfaces, and repair slate, tile, fiberglass shingles and asphalt roofs. Adheres even to damp, dirty, or oily surfaces. Prevents rust on any metal surface. Withstands water contact after application to stop leaks. Mildew proof. Easy to apply. Minimize

The lumber store 6-level multi-purpose shelving and lumber ... Read more

The lumber store 6-level multi-purpose shelving and lumber storage system is designed for easy installation for use in garages, workshops, storage sheds on walls or on fences. Featuring sturdy steel construction, it is ideal for storing lumber, pipes, tubing or any long narrow objects. Simply assemble and secure the left and right sides of the system to any vertical structural members, such as wall beams, studs, or fence posts within 4 to 6 Ft. from each other, to create instant wall mounted storage and free up valuable shop floor or bench space. The system can be installed indoors or outdoors and has a load capacity of 110 Lb. (50 kg) per level. Vertical spacing between the brackets is 6-1/2 In., and each bracket is long enough to hold and fully support pieces up to 12 In. in width. For best results the lumber store should be installed keeping the spacing between the two vertical bracke Minimize

DIY-500-HOM Features: -Basic starter set.-Works with all o ... Read more

DIY-500-HOM Features: -Basic starter set.-Works with all other pieces.-Aircraft aluminum, tempered spring steel, heat treated tool steel.-Compact case will hold 2 more blades.-Expands with all other parts.-Two bar lengths in set.-Warranted to the original retail purchaser against any proven defects in material or workmanship for 12 months.-Does not cover abuse, normal wear and tear, misuse, failure to follow directions or improper adjustment of tool system.-Artillery Tools will replace any part that proves to be defective in materials or workmanship. Includes: -Set includes: Professional case, handle, 15'' steel handle, 25''steel handle, 1 3/4'' blade, 6'' blade, standard fulcrum, 10'' wrench, 6 blade screws, #4 screwdriver, mallet bolt. Dimensions: -Dimensions: 27.25'' H x 10.5'' W x 3.5'' D. Minimize

HC-600-P Features: -Set includes: Professional case, 12'' ... Read more

HC-600-P Features: -Set includes: Professional case, 12'' steel extension handle, 25''steel handle, spike puller blade, 3'' blade, 6'' blade, standard fulcrum, 10'' wrench, 6 blade screws, #4 screwdriver. -Smaller set well equipped to get a homeowner doing their own tear out. -Aircraft aluminum, tempered spring Steel, heat treated tool steel. -Compact case will hold 1 more blade. -Six different tool configurations. -Expands with all other parts. -Two bar lengths in set. -Dimensions: 27.25'' H x 10.5'' W x 3.5'' D. 12 Month limited warranty: -Warranted to the original retail purchaser against any proven defects in material or workmanship for 12 months. -Does not cover abuse, normal wear and tear, misuse, failure to follow directions or improper adjustment of tool system. -Artillery Tools will replace any part that proves to be defective in materials or workmanship. Minimize

CO-600-FL Features: -Set configured for flooring removal f ... Read more

CO-600-FL Features: -Set configured for flooring removal for contractor of DIY person.-Aircraft aluminum, tempered spring steel, heat treated tool steel.-Set designed for flooring removal.-Case can hold several specialty items.-Two bar lengths in set.-Warranted to the original retail purchaser against any proven defects in material or workmanship for 12 months.-Does not cover abuse, normal wear and tear, misuse, failure to follow directions or improper adjustment of tool system.-Artillery Tools will replace any part that proves to be defective in materials or workmanship. Includes: -Set includes: Contractor case, 12'' steel extension handle, 25'' steel handle, 3'' blade, 6'' blade, spike puller blade, fulcrum extender, standard fulcrum, 10'' wrench, 6 blade screws, #4 screwdriver, ball grip and cap.-Ball grip is included in set. Dimensions: -Dimensions: 37'' H x 12'' W x 4.25'' D. Minimize

SAVE on the Ultimate sharpening assortment! We've bundled t ... Read more

SAVE on the Ultimate sharpening assortment! We've bundled the Tormek T-7 Sharpening System with the Tormek Woodturner's Accessory Kit, Planer/Joiner Blade Jig, and Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades will be automatically squared to the grinding wheel without the need for picky adjustments. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel for a fine or coarse grade by simply varying the rate of feed. Plus, the standard system now includes the SP-650 Stone Grader. Simply press it onto the wheel to grade the wheel up to 1000 grit and flip it over to return the wheel to coarse grinding. The Planer/Joiner Blade Jig sharpens HSS blades of any size, while the Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing the flute on gouges, a Machine Cover (MH-380), a Multi-Jig (SVS-50) for skew chisels with a straight or curved edges, and a book and DVD. The Handtool kit includes a knife jig, long knife jig, scissors jig, short tool jig, and an axe jig. What's in the Box? Truing and Dressing Tool. Stone Grader. AngleMaster. Honing Compound. One Knife Jig (SVM-45). One Long Knife Jig (SVM-140). One Scissors Jig (SVX-150). One Short Tool Jig (SVS-32). One Axe Jig (SVA-170). One Gouge Jig (SVD-185). One Tool Rest (SVD-110). One Turning Tool Setter (TTS-100T). One Profiled Leather Honing Wheel (LA-120). One Multi-Jig (SVS-50). Two Books. Two DVDs. One Machine Cover (MH-380). Minimize

Flexbar Ultrasonic Thickness Gage Quickly and accurately Me ... Read more

Flexbar Ultrasonic Thickness Gage Quickly and accurately Measures the through Thickness of materials that have good sound transmission and Parallel cross sections such as metals, aluminum, Plastics, ceramics and glass. Ideal for Checking Castings, wall Thicknesses of pipes and pressure vessels to determine surface erosion. Main Features include: Very Compact; Fully calibratable; Range: 0-225mm (steel); Sound velocity: 1000-9999m/s; Stores 5 velocities and 10 Measurements; Uses 2 AA batteries; Probe and Cable included. Carrying Case included. Specifications: Automatic Zeroing, Coupling condition indication, Probe error correction: Microporcessor controlled, Automatic shut off, Measurement Range: 0.04-8 in (1.2-200mm) (Steel), Display period: 0.5 seconds, Minimum pipe Cylinder and Tube Diameter: 0.8 in x 0.1 in (20mm x 3mm), Tolerance: µ (1%H+0.1)mm, Operating current: <20mA(3V), Measurement frequency: 5 MHz, Operating temperature: Tests velocity of sound 32°F-122°F (0°C-50°C), Material velocity Range: 3280-32805 Ft/s (1000-9999 m/s), Weight: (0.4 lb (0.17 kg), Stores up to five velocities of sound, Dimensions: 4.9 x 2.6 x 0.9 in, Rapid review of stored Test data(126 x 68 x 23mm), Compact, durable carrying Case, Low Battery Voltage indicator. Minimize