> Tools and Accessories > It/store bailey s

Free UPS GROUND shipping on this chainsaw. Offer applies to ... Read more

Free UPS GROUND shipping on this chainsaw. Offer applies to orders shipped within the Continental United States. If you order items in addition to this saw, you will be charged standard shipping for those items, but the weight of the saw will be excluded from your order.The OREGON PowerNow CS250S 40V MAX* Chainsaw Kit with Standard Battery Pack is a lithium ion battery-powered chainsaw that delivers a combination of performance and features that makes it a true alternative to many gas-powered chainsaws. For removing trees, cleaning up after a storm, pruning large branches or clearing debris from property, you can depend on the OREGON PowerNow 40V MAX* Chainsaw. The OREGON PowerNow Chainsaw, with its lithium ion battery pack, offers instant starting without a pull cord, powerful cutting with no-fade power, and long runtime. It is a smarter, quieter way to work free from the hassles of gasoline or cords. When not in use, the lithium ion battery pack holds a charge for months at a time, so the PowerNow Chainsaw is ready when you are. Equipped with a 14-inch bar, the PowerNow Chainsaw can power through logs as large as 10 to 12-inches. For smaller cuts, the CS250S chainsaw goes non-stop, cutting up to 125 two to three inch branches on a single charge. This performance may vary with user technique, chain sharpness, size and type of wood. The PowerNow Chainsaw is much quieter than gas-powered chainsaws in use and is silent between cuts. At just under 10 pounds, the PowerNow Chainsaw is lightweight, easily portable and offers ergonomic comfort. Not only is the PowerNow Chainsaw powerful, but it is free from the hassles of gasoline or power cords. The PowerNow Chainsaw starts instantly with the pull of a trigger v no pull cords, no gas, and no warm-up times. The PowerNow Chainsaw features the PowerSharp built-in chain sharpening system so you'll never cut with a dull chain again. When the chain dulls, simply pull the PowerSharp Lever for 3 to 5 seconds with the saw running and the chain will work like new.The OREGON PowerNow CS250S Chainsaw Kit features the 1.25Ah B500S 40V MAX* Battery Pack. This lithium ion battery combines high power with light weight, and incorporates the latest high capacity cell technology. One of the main advantages of lithium ion batteries is "no fade" power, which means they delivery constant power up right up until complete discharge. They don't slow down or become bogged down as the battery runs down. The B500S has no memory effect, charge maintenance and full discharge is NOT necessary to retain consistent capacity throughout the life of the battery. The premium cell technology in the B500S will last for approximately 1000 charge/discharge cycles. A completely discharged B500S battery pack will take approximately 60 minutes to charge. One of the key advantages is that the B500S is always ready; lithium ion batteries retain most of their charge when left off the charger for months at a time. The CS250S PowerNow Chainsaw comes with the C600 charger. *Fully charged battery voltage measured without a workload is 40 volts. Nominal voltage is 37. Minimize

M5 is the most sold model of all Logosol sawmills, so there ... Read more

M5 is the most sold model of all Logosol sawmills, so there is no doubt that it is a good sawmill. If you are not going to saw that much, or if you only going to use the sawmill for log house moulding, you can save some money by choosing a Logosol M5. The sawmill can work with all standard shape logs up to 5m (14 ft 9") length. Extensions are available to easily add length to process longer logs. Half metre extensions are normally added to provide extra length and support for longer logs. The low profile chain is available in 40cm (16"), 50cm (20") and 63cm (24") cutting lengths to handle most log diameters (even longer chains can be added to handle those extra large logs). Logs too large to place on the sawmill can be cut by placing the sawmill on the log.Made of anodized, extruded aluminum, weighs only 52kg (115lbs) the mill is extremely strong for it's size, easily supporting and lifting over ten times it's weight. The aluminium is of the highest quality available, in the same class as that used for aircraft construction. This mill is designed with the operator in mind. Everything is at the right height for long hours of operation without back strain. It is easy to use - no pushing the saw through the wood. The M5 is rust proof - all parts are weather resistant. Anodized aluminum, stainless steel bolts and nylon slides are used in the construction. There is very little to break, adjust or wear out in this mill.The logs are best handled on a log deck and the sawmill is designed to allow the logs to be rolled directly from the log table onto the log bed and to be sawn at a comfortable working height. The log is placed on one or two log shelves which can be moved up and down. One end of the log is held in place by a spiked bumper. The saw runs on a straight guide rail and saws the log very accurately. The special chain and blade allows the chain saw to cut straight with very high accuracy even in low grade quality saw logs. No "band-saw waves". The surface is so smooth on lumber finished with the M5, it can be finished with a belt sander. With the ease of log handling and positioning, using the independent log bed suspension, you can maximize the cutting of the log to produce the best lumber.The chain used on this sawmill is manufactured by the world's leading chainsaw manufacturer and has been proven as a reliable cutting solution, and produces an amazingly smooth surface. This narrow chain takes only 6 mm (1/4") kerf. Easily sharpened, these chains will last through 3000 bd. Ft of cutting. This sawmill has been designed with safety in mind. The chain pulls the wood against the bed, firmly holding it in place while cutting. The use of the mill involves both hands, keeping the possibility of accidents at a minimum.The two Log beds move up and down, separately allowing for easy leveling of the log to achieve the most productive cut. This feature also provides the ability to produce tapered and angle cuts. You can easily switch from 6 mm (1/4") to 3 mm (1/8") increments to produce lumber to the accuracy desired. Three pulleys combined with a nylon poly line provide maximum lifting capacity. Easily lifts a log up to 500kg (1100 lbs).Note:Mill does not include powerhead or table extension shown in picture.Looking for Logosol replacement parts? Visit our PartFINDER for the complete list. Minimize

Logosol"s vertical milling machine is the universal machine ... Read more

Logosol"s vertical milling machine is the universal machine in the joinery shop. It helps you with everything from preparing timber lengthwise and crosswise for finger jointing, to milling complete windows and advanced furniture components. The multi-molder MF30 is a vertical milling machine out of the ordinary for milling against fence, end and side milling on carriage, curve milling, and milling on XY-table. In addition, it has three unique functions, which you otherwise only find in advanced industrial machines. The cutter can be tilted in two directions, enabling you to do more with the same tool. The spindle can easily be replaced with a high-speed cutter for shank end milling. The mill fence can be tilted, which gives maximal contact with the surface of the workpiece, no matter what angle the spindle has or what tool is used. The fences can also be moved laterally to fit the size of the tool. In addition, the machine has a big and stable carriage, which enables you to secure the workpiece for processing of the highest precision.As a vertical milling machine the multimolder MF30 gives you more for the money; more than you get from any other machine. And into the bargain you get three additional machines. The secret of it is that the entire motor unit with the spindle can be tilted through 270 degrees! This gives you: A tenoning machine with tiltable spindle. A long-hole drill with tiltable spindle. A plunge router with tiltable spindle. You have four machines with five functions in the same shell. This gives you possibilities that otherwise would require a whole assembly of machinery, so you save both time and space. There are a great number of accessories and tools for the machine. When using the vertical milling machine MF30, you can shape wood however you like.The tiltable vertical arm makes the machine easy to use and leads to fewer work steps as the machine can be adjusted for the work at hand. There are accessories available for all sorts of requirements. For instance, there are extensions for the carriage and the table, a kit for curve moldings, feeder unit, etc. You work in comfortable work postures and can concentrate on realizing your dreams from wood!The entire machine is built around the heavy cast iron table to give as high stability and durability as is possible. The fences and the carriage are strongly built to give the best precision possible. The machine's simple but robust design makes it secure and easy to survey so that you can feel safe while operating it. The simplicity also makes it extremely reliable in service.Looking for Logosol DH410 Planer / Moulder replacement parts? Visit our PartFINDER for the complete list. Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 36 In, Rod Dia 1-1/4 In, Retract 46-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Efco 40cc straight shaft trimmer is perfect for even the mo ... Read more

Efco 40cc straight shaft trimmer is perfect for even the most demanding weed cutting jobs. Powered by a professional two-stroke engine with electronic ignition for high performance, easy starting and long life. It has a solid steel drive shaft. The cylinder is nickle plated for consistent long-life engine performance even in tough operating conditions. The over-sized sintered clutch transmits maximum power to the cutting head. The flywheel is designed to optimize engine cooling even in extreme heat. This unit has an extra-large fuel tank for longer periods of continuous duty, so you can get the job done. Transmission is built with a solid steel shaft supported by five flexible bushings for maximum resistance to stresses and reduces vibrations. Like most Efco outdoor power equipment units this one has an easy-to-access high-quality cloth air filter for extended engine life (no tools required).Sorry, it cannot be shipped to California. Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 In, Stroke 12 In, Rod Dia 1-1/8 In, Retract 22-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Logosol's circular resaw provides you with lumber of exactl ... Read more

Logosol's circular resaw provides you with lumber of exactly the dimensions you desire. The circular resaw quickly and easily gives you high-precision results, and you can manage the entire process without help. What is good about having a Circular Resaw is that you either saw the lumber yourself, or you buy lumber of a few dimensions, and then you resaw it to the required dimensions when you actually need it. This way, the circular resaw facilitates the handling of lumber, since there will be fewer boards that need to be dealt with before you are going to use them. A considerable supply of large-sized lumber of different qualities, gives you infinite possibilities of resawing to the dimensions you need or the material your customers require.With Logosol¦s circular resaw you get high-precision results. You can be certain of getting the correct dimensions and a fine surface! The sawing speed is adjustable and is set so that you can easily manage the operation single-handed. If you use the highest feeding speed, however, you will need help in order to manage!The machine works on both seasoned and fresh-cut timber. The machine"s construction is based on simple technology and is therefore extremely reliable in service. The circular resaw is also designed with the stress on personal safety, so that you can feel safe when working with the machine.Logosol's product concept is to manufacture small-scale machines that do the same job as a big industrial machine, but with lower capacity and at a much lower price. The Circular Resaw is especially designed for small-scale wood processing. Our research has shown that timber wider than 6" is only resawn in exceptional cases. By limiting the size of the circular saw blade, we have been able to develop a machine that is working excellently, is easy to use, can be moved with a fork lift, and due to this is better suited for small-scale wood processing than, for example, a big second-hand industrial resaw.Large-scale planer mills use bandsaws when resawing timber. These are really large machines with wide saw blades, impressive capacity, and an extremely small saw kerf. Compared to the type of band resaw that can be a possible choice for the smallscale wood processor, Logosol's Circular resaw has clear advantages. The circular saw blade cuts straight, and you can saw tens of thousands of metres without doing anything about the circular saw blade. With a bandsaw or a band resaw you have to replace the saw blade several times during the same period of time. When it is time to change saw blade, you replace it with just a few simple operations.Looking for Logosol replacement parts? Visit our PartFINDER for the complete list. Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 In, Stroke 36 In, Rod Dia 1-1/8 In, Retract 46-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Efco 36cc straight shaft trimmer is perfect for even the mo ... Read more

Efco 36cc straight shaft trimmer is perfect for even the most demanding weed cutting jobs. Powered by a professional two-stroke engine with electronic ignition for high performance, easy starting and long life. It has a solid steel drive shaft. The cylinder is nickle plated for consistent long-life engine performance even in tough operating conditions. The over-sized sintered clutch transmits maximum power to the cutting head. The flywheel is designed to optimize engine cooling even in extreme heat. This unit has an extra-large fuel tank for longer periods of continuous duty, so you can get the job done. Transmission is built with a solid steel shaft supported by five flexible bushings for maximum resistance to stresses and reduces vibrations. Like most Efco outdoor power equipment units this one has an easy-to-access high-quality cloth air filter for extended engine life (no tools required).Sorry, it cannot be shipped to California. Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 20 In, Rod Dia 1-1/8 In, Retract 30-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

The stack cutter cross-cuts board stacks with great accurac ... Read more

The stack cutter cross-cuts board stacks with great accuracy. The 59" 53" or 47" (150, 135, 120 cm) long guide bar is steered by the bar nose holder. The chain is an standard 3/8÷ cross-cut chain driven by our powerful 5 kW, 3-phase electric motor E5000. Lighter solution In line with Logosol"s philosophy, they have examined a function that earlier cost a fortune to accomplish, and produced a smaller and lighter solution. In this case a stack cutter that takes the cut linearly vertically, a feature that normally only is found in larger industrial machines. The advantages of cutting linearly is that the capacity significantly increases both as regards sawing speed and the size of the board stack. Logosol's stack cutter has a relatively low weight since it is mainly made of aluminum. Three large wheels make it easy to move the machine by hand. One of the wheels is adjustable in height, and with the help of fixed sigths the cut can be aligned. With the stack cutter comes a 6 ft 7¦¦ (2 m) long measuring rod, which is a good means of measuring the length of the stack.If you regularly cut large amounts of lumber into length, the easiest way is to do it with a stack cutter. It saves time. You are also spared from monotonous tasks that strain your body. Logosol¦s mobile stack cutter does not take up a great deal of room, and by quickly cutting the stacks so that they are more easy to handle, you will save even more space. As Logosol¦s stack cutter is such a small investment, it will be profitable already when cutting small volumes With Logosol's stack cutter you can cut your board stacks with an accuracy down to +/- 2 millimeters. This is due to their portal technique, where the guide bar is fitted at both ends. The accuracy is significantly better than comparable stack cutters that have turnable guide bars, i.e. radial cutting. There is no need for a special installation. The stack cutter is ready for use on delivery. Thanks to the low weight, it is easy to roll in place over the stack to be cut. The stack need not lie completely level as the stack cutter can be adjusted to the correct angle. Line up the cut, set the stack cutter, push the start button and let the guide bar sink down through the boards. Free TRUCK shipping on this Logosol Stack Cutter. Offer applies to orders shipped within the Continental United States.Looking for Logosol replacement parts? Visit our PartFINDER for the complete list. Minimize

Logosol's patented construction has been developed in coope ... Read more

Logosol's patented construction has been developed in cooperation with Markusson Development, a company which has many years experience of automatic chain sharpening machines. The sharpening robot revolutionizes the work with chainsaw mills, and you get the luxury of always having a perfect chain on your chainsaw. Besides sharpening automatically, it also sharpens the chains amazingly well. Without having any scientific evidence, we can state that the edges of the cutting teeth feel sharper than on a new chain, and this is clearly noticeable when you are sawing. It can sharpen both 1.3 picco chains and ordinary 3/8" chains, but also 0.325 chains. Both the tooth angle and the cutting angle are adjustable.The machine sharpens one side of the chain at a time. This means that after a while you have to reset the angle of the sharpening head and move the chain one tooth forward to sharpen the other side of the chain. It sharpens ten teeth per minute. Sharpening one chain takes approximately 1.5 minute per side. Starting and resetting the sharpening head takes about half a minute.Every Logosol Sawmill owner knows that you should sharpen the chain frequently, but only file off a little, just so that the teeth get their sharpness back. This is, of course, no problem for the sharpening robot. What is more impressive is that it can easily fix a chain that has been damaged by nails in the timber. Regardless of how much take-off you choose, it will not burn the teeth.When sawing, you do not always have access to electricity. Due to the fact that the robot is powered by 12 V you can run it with a car battery. A battery is enough to sharpen several hundred chains. You can also run it with a starting aid for cars, which you can get cheaply. An ordinary battery charger is also an option. The sharpener comes with a detachable cable with strong clamps.The best is if the chain has an even number of teeth, i.e. just as many right teeth as left teeth. The number of links is then exactly divisible by four (e.g. 60 drive links). In that case you can let the chain run a couple of turns on each side. Every turn makes the chain sharper until the grinding disc does not touch the teeth any more. If the chain has an odd number of teeth, or if you only want to grind the chain one turn anyway, you fit a small clamp on the chain, which automatically interrupts the sharpening process after one turn.One thing that indicates that the machine grinds perfectly is that it is possible to grind ripping chains without having any angle. Normally, this is not possible since the slightest deviation on the teeth makes the chain cut askew. Again, without having this scientifically proven, we can state that we have tested this with very good results. Sharpening the chain at 0 degrees gives you many advantages: you can sharpen all teeth at once, the cut surface becomes noticeably better and the chain can cut faster.We who work at Logosol think that this is very good. This is a machine that will significantly facilitate the work for all Logosol Sawmill owners. If you compare it with the automatic feeding of the electric saw, the sharpening robot has the same convenience factor. Another thing is that it will most likely give you a noticeably better sawing result and less wear and tear on the cutting equipment.Looking for Logosol DH410 Planer / Moulder replacement parts? Visit our PartFINDER for the complete list. Minimize

Lightweight, easy to handle, this trimmer represents the be ... Read more

Lightweight, easy to handle, this trimmer represents the best value in price while offering renowned Efco high quality and durability. Tap'n go head advances premeasured line length with a simple tap of the head for uninterrupted cutting. You'll find high torque even at lower RPMs. They have a forged-steel drive shaft and connecting rod for top performance and long life. Inside is a centrifugal clutch with clutch shoes of sintered material, ensuring resistance to stress and long-term durability. For ease of starting it is equipped with primer bulb to ensure easy starting with minimum pulls. Like most Efco outdoor products it has an easy access air filter that require no tools to take off.Sorry, it cannot be shipped to California. Minimize

Bailey's Kiln Dry System, for quality, value and economic o ... Read more

Bailey's Kiln Dry System, for quality, value and economic operation. If you're interested in a very good, dependable and affordable dry kiln, you've come to the right place. Several years ago we needed a kiln here at the shop, because we mill a lot of wood here with our portable sawmills, and we searched the country for the best one. We settled on a kiln, made by Nyle, that has the same capacity as our model 4K (that we're selling here), and it has performed very well for us. We ordered a kit , built a building out of lumber, using the plans that are supplied in the package, we insulated the building and we installed the Nyle components. The only thing we had to buy separately was a special door gasket kit, which doesn't come in the kit because door dimensions vary so much. We've had success with the kiln from the start. We've dried fir, pine, redwood, madrone, five different types of oaks and chinkapin. Our 4K kiln is made by Nyle and we can tell you it really works well. It will dry approximately 2000 bd. ft. of softwood lumber and 4000 bd. ft. hardwood lumber; the quantity depends on the species. Click here for more details. Minimize

A new generation of heavy-duty trimmers with four-stroke en ... Read more

A new generation of heavy-duty trimmers with four-stroke engines; providing high power and torque to tackle any job. Featuring a 4 cycle Honda engine where do you don't have to mess with 2 cycle mix. You can just pour and go. They make it easier to start for near-effortless starting. You'll find about 50 percent fuel savings compared to similar-model two-cycle trimmers. Not only that but even lower maintenance costs. It is even quieter than comparable models. Also for your benefit they feature low vibration for greater operator comfort. If you terrain has its ups and downs this model has 360? lubrication system permits use in any position. This model has high torque, improved power and performance with 10,000 RPM. Minimize

Made from formulated, cold rolled, annealed, heat treated, ... Read more

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity. The Cannon Superbar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain. A precision ground groove to within .002" means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.Cannon Superbars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut. The old saying "You get what you pay for" certainly pertains to the Superbar. All Superbars are skillfully hand made and put through rigorous quality assurance checks prior to packaging. Subsequently, the Superbar has a lifetime of up to three times longer than the competitions mass-produced bar. This equates to an enormous 61% savings! When you buy a Cannon Superbar, you are buying "The Best Bar - Bar None!". Minimize

Made from formulated, cold rolled, annealed, heat treated, ... Read more

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity. The Cannon Superbar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain. A precision ground groove to within .002" means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.Cannon Superbars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut. The old saying "You get what you pay for" certainly pertains to the Superbar. All Superbars are skillfully hand made and put through rigorous quality assurance checks prior to packaging. Subsequently, the Superbar has a lifetime of up to three times longer than the competitions mass-produced bar. This equates to an enormous 61% savings! When you buy a Cannon Superbar, you are buying "The Best Bar - Bar None!". Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 In, Stroke 16 In, Rod Dia 1-1/8 In, Retract 26-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 16 In, Rod Dia 1-1/8 In, Retract 26-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 In, Stroke 30 In, Rod Dia 1-1/8 In, Retract 40-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

The "More Power Puller" has been manufactured by The Wyeth- ... Read more

The "More Power Puller" has been manufactured by The Wyeth-Scott Company since 1934. It has been the safest and most durable cable puller ever made. This heavy-duty industrial portable ratchet puller/hoist is not the type of light-weight puller found at most home centers or discount stores - it has been designed and proven to perform in a variety of demanding environments without bending, breaking or collapsing. The components are made of solid, thick cast iron - not aluminum. The cable is 5/16" flexible wire rope - not the more common 1/4" (or smaller) aircraft cable. The More Power Puller is not light-weight like other brands of come alongs. Our cable puller is 27 pounds of iron and steel. The design of The More Power Puller hasn't changed much in over 70 years (why change a good thing?). This hand winch will last for generations. We regularly service pullers that are 30 to 55 years old, and often, all they need is a new cable or spring. We are confident you will find The More Power Puller to be reliable, safe and heavy duty tool that will prove to be indispensable. Pulling capacity is 6,000 pounds dead lift and 12,000 drag/pull. Replacement handle - WS P7 3 and handle extension - WS P7 3 EXT are available. Minimize

This T&S 014943-45 replacement 3/8" I.D., 300 PSI, heavy du ... Read more

This T&S 014943-45 replacement 3/8" I.D., 300 PSI, heavy duty 30? blue hose is made of strong nitrile tubing with a modified nitrile jacket for better oil and grease resistance within your T&S hose reel assembly. Each 30? blue hose is reinforced with a high tensile steel wire braid that?s best for flexure resistance and pressure. Please consult the Specification Sheet for additional measurements. 014943-45 From T & S Brass and Bronze Works Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 12 In, Rod Dia 1-1/8 In, Retract 22-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 4 In, Rod Dia 1-1/8 In, Retract 14-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 14 In, Rod Dia 1-1/8 In, Retract 24-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 10 In, Rod Dia 1-1/8 In, Retract 20-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 ... Read more

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 30 In, Rod Dia 1-1/4 In, Retract 40-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips Minimize