> Tools and Accessories > It

Standard BAND-IT Banding Tool. For use on band widths of 3/ ... Read more

Standard BAND-IT Banding Tool. For use on band widths of 3/16" to 3/4". Comes with a spin handle retaining ring to keep parts intact. Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed. Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping. Drop forged tool with built in cutter. Spring loaded gripper lever improves ease of use. Blue, epoxy powder coated finish resists corrosive elements. Minimize

Adjustable Band Pack, 10 Ft, Adjustable Clamp, Stainless St ... Read more

Adjustable Band Pack, 10 Ft, Adjustable Clamp, Stainless Steel, Plain Finish, Includes 5 Individual Packs Of 10 Ft Of Screw-band, 5 Housings, 5 Slotted Screws Minimize

Hoof care the easy & comfortable way! Easy on the horse and ... Read more

Hoof care the easy & comfortable way! Easy on the horse and the user, the Hoof-it(R) Stand gives you both the post and cradle integrated into one, innovative hoof stand. Features a shock absorbing, integrated rubber cradle and hoof post into one easy-to-use unit. Provides a stable and safe support for the horse, allowing the horse to relax without putting all of it's weight on you. *Magnet Not Included* For additional safety and stability when working with the Hoof-it(R)Stand try the following: Keep one foot on the base unit when working with the Hoof(R) Stand Do not leave the horses leg or hoof in the cradle or on the stand, when unattended. Developed for farriers, veterinarians and horse owners. The innovative design dramatically reduces your risk of getting injured during hoof care tasks. The stand is ideally suited for use with all types of horses, including older horses that require special support and comfort during hoof care tasks. The rubber cushioned cradle fits different hoof sizes and hugs the hoof. Let Hoof-it(R) Hoof Stand deal with the majority of the horses weight during any type of hoof care tasks, rather than your back or knees. Also available in Draft Horse size, see item # BIA61 and Junior Size #E003012 Minimize

Banding Warehouse Kit, Stainless Steel Banding And Buckles, ... Read more

Banding Warehouse Kit, Stainless Steel Banding And Buckles, Stainless Steel, Nylon 11 Stainless Steel And Carbon Steel, Number Of Pieces 20, Includes (1) 2lnp6, (2) 2lnr3, (2) 2lnt1, (2) 2lnt3, (2) 2lnt5, (2) 2lnu9, (2) 2lnv1, (1) 2lpc9, (2) 2lpa7, (2) 2lpc2, (2) 2lpc3 Minimize

Automatic Air Tool, Junior Style Preformed Clamps, Cfm @ Fu ... Read more

Automatic Air Tool, Junior Style Preformed Clamps, Cfm @ Full Load 6.7, Required Pressure 100-120 Psi, Air Inlet Npt 1/4 In, Min. Hose Size 3/8 In, Tool Weight 135 Lb, For Use With 2lpg8, 2lpg9, 2lph1 To 2lph9, 2lpj1 To 2lpj9 Minimize

Adjustable Clamp Pack, 10 Ft, Worm Gear, Stainless Steel, P ... Read more

Adjustable Clamp Pack, 10 Ft, Worm Gear, Stainless Steel, Plain Finish, Includes 5 Individual Packs Of 10 Ft 200/300ss 3/8 In Banding, 3 Screw-seals, And 3 Racks Minimize

Stainless Steel Embossing Tool, Length 5 1/2 In, Width 2 1/ ... Read more

Stainless Steel Embossing Tool, Length 5 1/2 In, Width 2 1/8 In, Height 1 7/8 In, For Use With 2lnw4 Minimize

MBM Kutrimmer 1134 is a Paper cutter which is designed for ... Read more

MBM Kutrimmer 1134 is a Paper cutter which is designed for heavy duty cutting jobs. It is a great choice for cutting papers photographs laminated material and other sorts of papers. This table top cutter has a cutting capacity of 25 sheets. It has a cutting length of 13 34. This machine has all-metal constructed body for durable and heavy duty operations. Its cutting blade is made from high quality Solingen steel which can be re-sharpened. MBM Kutrimmer 1134 comes with a specially designed cutting handle for comfort and safety. Its Easy Lift handle release lever raises the automatic clamp after cutting which allows the users to easily remove the paper.It has an integrated cutting line indicator which lets you know where exactly the blade is going to cut the paper. Equipped with the precised guides scaled in inches and metrics it ensures highly precised cutting. Its base is printed with standard paper sizes for user convenience. Its advance safety features such as automatic blade covers and transparent Lexan blade guard provides maximum protection against body injury and ensures safe operation. It is built with non-skid rubber feet that keeps this machine fixed while cutting. Weighing only 11 pounds this cutter is highly portable. Features High quality high performance Solingen steel blades which can also be removed for re-sharpening.Being capable of cutting 25 sheets and having cutting length of 13-34 it can handle most of the trimming jobs. User safety is ensured with the presence of blade covers and transparent Lexan safety guard. Precision side guides scaled in inches and metric system are provided for more accurate cutting.Adjustable back gauge .Standard paper sizes are indicated on table base for user convenience.Manual clamping system for holding paper securely in its place.Provided with non-skid rubber feet for safe operation.Specifications Cutting Length 13 34 Sheet Height Capacity 25 sheets Table Size 15 x 12 Clamping Method Manual Base Metal Guide Types Inches Metric Material Cut Ability Cardstock Construction Paper Laminator Film Paper Photo Paper Safety Shield Yes DimensionsW x D x H 13 14 x 22 12 x 12 Shipping Weight 11 lbs Resources mbm brochure 1134 Minimize

Standard BAND-IT Ratchet Tool. For use on band widths of 3/ ... Read more

Standard BAND-IT Ratchet Tool. For use on band widths of 3/16" to 3/4". Heavy duty Ratchet style tensioner for 3/16" to 3/4" stainless steel banding. Tensions and cuts off the tail of the clamp being formed. Used to apply BAND-IT Stainless steel bands, Galvanized carbon steel band, BAND-FAST, general use band and miscellaneous strapping. Designed for easy loading and removing of material. Tool for use with medium strength applications. Minimize

BAND-IT Bantam tool is used to install BAND-IT Band, BAND-I ... Read more

BAND-IT Bantam tool is used to install BAND-IT Band, BAND-IT Band with COLOR-IT, BAND-FAST, Galvanized Carbon Steel Band, VALU-STRAP, VALU-STRAP PLUS, Valuband, 304 Stainless Steel Band, BAND-IT Ties, 316 Uncoated & Coated Stainless Steel Band, 317L Stainless Steel Band and other specialty steels. Compact, lightweight, ratchet action tool with built in cutter. Designed for easy loading and removing of material. Useful in tight areas with minimal access. Zinc plated for corrosion resistance. 3 way handle adjusts for one or two-handed tensioning. Offers Low torque, and one handed installation. Minimize

Manual Cut Off Air Tool, Junior Style Preformed Clamps, Cfm ... Read more

Manual Cut Off Air Tool, Junior Style Preformed Clamps, Cfm @ Full Load 6.7, Required Pressure 100-120 Psi, Air Inlet Npt 1/4 In, Min. Hose Size 3/8 In, Tool Weight 58.1 Lb, For Use With 2lpg8, 2lpg9, 2lph1 To 2lph9, 2lpj1 To 2lpj9 Minimize

Quick and simple way to splice wire - barbed, woven, smooth ... Read more

Quick and simple way to splice wire - barbed, woven, smooth or high tensile. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Splices stay tight even with temperature changes. Holds tight using only one splice per joint. Package of 100. Crimp 'N Cut Spice-It Tool sold separately. Minimize

MPN #OTC3550. OTC It, Torque Adapter Module. Most Diagnosti ... Read more

MPN #OTC3550. OTC It, Torque Adapter Module. Most Diagnostic Tools products are available for in-store pickup from Advance Auto Parts. Minimize

M5 is the most sold model of all Logosol sawmills, so there ... Read more

M5 is the most sold model of all Logosol sawmills, so there is no doubt that it is a good sawmill. If you are not going to saw that much, or if you only going to use the sawmill for log house moulding, you can save some money by choosing a Logosol M5. The sawmill can work with all standard shape logs up to 5m (14 ft 9") length. Extensions are available to easily add length to process longer logs. Half metre extensions are normally added to provide extra length and support for longer logs. The low profile chain is available in 40cm (16"), 50cm (20") and 63cm (24") cutting lengths to handle most log diameters (even longer chains can be added to handle those extra large logs). Logs too large to place on the sawmill can be cut by placing the sawmill on the log.Made of anodized, extruded aluminum, weighs only 52kg (115lbs) the mill is extremely strong for it's size, easily supporting and lifting over ten times it's weight. The aluminium is of the highest quality available, in the same class as that used for aircraft construction. This mill is designed with the operator in mind. Everything is at the right height for long hours of operation without back strain. It is easy to use - no pushing the saw through the wood. The M5 is rust proof - all parts are weather resistant. Anodized aluminum, stainless steel bolts and nylon slides are used in the construction. There is very little to break, adjust or wear out in this mill.The logs are best handled on a log deck and the sawmill is designed to allow the logs to be rolled directly from the log table onto the log bed and to be sawn at a comfortable working height. The log is placed on one or two log shelves which can be moved up and down. One end of the log is held in place by a spiked bumper. The saw runs on a straight guide rail and saws the log very accurately. The special chain and blade allows the chain saw to cut straight with very high accuracy even in low grade quality saw logs. No "band-saw waves". The surface is so smooth on lumber finished with the M5, it can be finished with a belt sander. With the ease of log handling and positioning, using the independent log bed suspension, you can maximize the cutting of the log to produce the best lumber.The chain used on this sawmill is manufactured by the world's leading chainsaw manufacturer and has been proven as a reliable cutting solution, and produces an amazingly smooth surface. This narrow chain takes only 6 mm (1/4") kerf. Easily sharpened, these chains will last through 3000 bd. Ft of cutting. This sawmill has been designed with safety in mind. The chain pulls the wood against the bed, firmly holding it in place while cutting. The use of the mill involves both hands, keeping the possibility of accidents at a minimum.The two Log beds move up and down, separately allowing for easy leveling of the log to achieve the most productive cut. This feature also provides the ability to produce tapered and angle cuts. You can easily switch from 6 mm (1/4") to 3 mm (1/8") increments to produce lumber to the accuracy desired. Three pulleys combined with a nylon poly line provide maximum lifting capacity. Easily lifts a log up to 500kg (1100 lbs).Note:Mill does not include powerhead or table extension shown in picture.Looking for Logosol replacement parts? Visit our PartFINDER for the complete list. Minimize

Smoother, More Durable, More Powerful! Even before you swit ... Read more

Smoother, More Durable, More Powerful! Even before you switch it on, you'll be impressed by the sleek, ergonomic design and convenient, thumb-ready controls of the Festool Rotex 150 FEQ 6� dual mode sander. Look closely and you'll see a small green button near the sanding pad: push it to change pads without tools! The futuristic cowling above the pad removes easily, and when in place, prevents damage to perpendicular surfaces while sanding! Large bosses on either side of the housing accept the auxiliary handle, which is helpful when sanding aggressively. The sleek Rotex hand-guard is actually the Dust Extraction port, and removes with the push of a green button for improved access in tight quarters. After the visual inspection, it won't be easy to resist the urge to attach the � Plug-It� removable cord and fire it up. While you will undoubtably detect some gear noise from the new heavy-duty, double-sealed long-life gear train, you will be amazed by the smoothness in both the Random Orbit and Rotary/Random Orbit modes. Of course, tool-free pad changes make it easy to go from the standard soft pad for coarse or fine sanding on curved and flat surfaces to the optional hard pad for heavy-duty sanding and edge work, or to the supersoft pad for contoured surfaces. Felt and sheepskin pads are available for polishing and buffing. Connect the Festool Rotex sander to an optional Festool dust extractor to capture nearly 100% of all tool-generated particulates. The JetStream dust collection in combination with an optional Festool Dust Extractor extends abrasive life and captures nearly all of the sanding dust to help maintain a clean workplace. The Festool Rotex 150 FEQ includes a soft sanding pad, auxiliary handle, � Plug-It� cord system, 1 abrasive disk sample, and T-Loc Systainer 2 storage chest. Common Replacement Parts FESTOOL ROTEX 150 FEQ FEATURES AT A GLANCE Change Pads without Tools Pad Brake avoids � set-down� and start-up gouges StickFix hook and loop pads for easy abrasive changes Removable Dust Collector Port for easy dust extraction Thumb-Switch Selection of coarse or fine orbit modes Weighs just 5.1 pounds No-Load spead is electronically controlled from 2000-5600 RPM with a 0.2 inch sanding stroke Three-Year Factory Warranty FESTOOL ROTEX 150 FEQ T-Loc SYSTAINER CONTENTS: 1. � Plug-It� Detachable Power Cord 2. Soft Sanding Pad ( 496147 ) 2. Sample Abrasive Discs 3. Removable Handle ( 487865 ) 4. Edge Protector ( 493913 ) #3 T-Loc Systainer ( 497565 ) FESTOOL ROTEX 150 FEQ ACCESSORIES Abrasives Sanding Pads Polishing Accessories Miscellaneous Accessories FESTOOL ROTEX SANDERS PRODUCT COMPARISON Feature Rotex 150 E Rotex 150 FEQ Advantage Power 500 Watts 720 Watts A LOT more power to quickly go through demanding sanding applications. Changing pads On board Allen wrench Tool-free pad change Faster and easier pad change - always work with the right pad for the material - saves time and money. Changing between modes Knob to lift up and turn around Knob to press Faster and easier to switch between modes - saves time. Dust port Oval dust port Round, removable dust port Dust port can be conveniently removed � an especially nice feature when polishing. Gear Unit Gear unit sealed with rubber gasket Completely sealed gear unit without wearing parts Dramatically extends service life of the gear unit; downtime and costs for repairs and replacement are reduced, especially in applications with aggressive dust like solid surface. Protector No Protector Protector covers pad and protects both pad and adjacent workpieces from being damaged Sanding pads last longer. No damage to adjacent workpiece - no reworking necessary. Also prevents sander from jolting when sanding close to walls etc. Cord Regular cord Plug-it detachable cord Easy to replace (instead of expensive repair). One cord for multiple sanders. Switches On/Off switch and mode changing switch located on the side of the machine Both s Minimize

Introducing the new Sabre-2 General Purpose Cutter. This v ... Read more

Introducing the new Sabre-2 General Purpose Cutter. This versatile cutting tool is designed to cut a wide range of sheet materials. It offers straight, square and clean cutting for a variety of materials including foam board, corrugated plastics, cardboard, and more. The Sabre-2 Board Cutter is designed for use on a bench or attached to the optional stand. It includes blade depth adjustment and features a cutting head that automatically retracts to a safe position when not in use. The innovative hinge and lift arm mechanism makes it possible to cut materials longer than the length of the cutter. It also accepts materials of varying thickness without affecting either the line or angle of cut. Superbly styled, the extruded anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting. A full length silicone rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting, providing protection for even the most sensitive surfaces. A high-grade polymer bearing system offers lasting accuracy. The Sabre-2 Cutter is efficiently engineered for high volume production and with its patented linear bearings that have been test run under load for 1000 miles, this cutter is backed up by a 20 year manufacturer's warranty. Outstanding Features of the Sabre-2 Cutter: -Rear loading blade holder for swift replacement; blades will never pull out in heavy materials. -Fully equipped and ready to work with blades included. Accepts standard utility blades. -Integral base-plate with metric parallel indents and a cut groove. -Self-leveling hinges for materials up to 13mm (1/2"). -Quick fit thread cap for easy accessory attachment. -Blade locking thumb screw adds safety and convenience. -Rotating knob for ultra-fine blade depth adjustment. -Two full length silicone grip cords protect and clamp your materials. -Safe and efficient blade ejector also doubles as a cut depth gauge. -Optional 36" extended measuring arm for improved accuracy and versatility. Questions? We are here for you. Call us at (866)537-2244. Specifications and Features: Model100" Sabre-2 ManufactureFoster KeenCut Manufactured InUK Maximum Cutting Width100" Accuracy0.03" Blade Depth AdjustmentYes Cuts ThroughFoam Centered Board (up to 10mm/0.4")*Foam Centered Board (up to 13mm/0.5" using optional XR Blade)PVC Foam board (up to 6mm/0.25")Honeycomb and Corrugated PlasticsVinyl and Plastic FilmCardboardCorrugated Cardboard Safety FeaturesBlade retracts when not in use Included Accessories100 Medium Duty Utility Blades Optional Accessories Optional StandOptional Stand Package. Includes 36" high stand, waste catcher & roll feederSquaring/Measuring Arm Net Weight / Shipping Weight60 lbs. / 95 lbs. Manufacture'sLimited Warranty5 Year20 Year Bearings Product Code04KCSABRE100 List Price$1,210 You Save$121 Our Price$1,089 Minimize

For use with standard 3M™ Roloc™ Disc Pads and slow speed a ... Read more

For use with standard 3M™ Roloc™ Disc Pads and slow speed air or electric drills for fine grade sanding (3000 RPM). The face is designed for the 3 inch 3M™ Finesse-it™ Buffing Pad, part number 05925. Minimize

BAND-IT Bantam Strapping Tool is used to install BAND-IT Ba ... Read more

BAND-IT Bantam Strapping Tool is used to install BAND-IT Band, BAND-IT Band with COLOR-IT, BAND-FAST, Galvanized Carbon Steel Band, VALU-STRAP, VALU-STRAP PLUS, Valuband, 304 Stainless Steel Band, BAND-IT Ties, 316 Uncoated & Coated Stainless Steel Band, 317L Stainless Steel Band and other specialty steels. Used for light duty strapping applications. Designed for quick take up and tensioning. Compatible with band widths of 3/16" to 3/4". Useful for packaging applications. Requires two handed installation. Minimize

Heavy duty tool, designed specifically for applications tha ... Read more

Heavy duty tool, designed specifically for applications that require higher torque. Ideal for use with municipal applications and large diameter hose clamping. 25% larger tension screw, heavier handle and bearing than C00169. For applications requiring extra strength. Tensions over 3,300 pounds of force. Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping. Tensions and cuts off the tail of the clamp being formed. Drop forged tool with built in cutter. Spring loaded gripper lever improves ease-of-use, and improves band tensioning. Minimize

A one piece hand tool to apply BAND-IT Junior and Junior Sm ... Read more

A one piece hand tool to apply BAND-IT Junior and Junior Smooth ID Clamps. Installs 5 widths of Junior and Junior smooth ID Clamps ranging from 1/4" width to 3/4" widths in the following diameters: 13/16" diameter to 8" diameter. C00269 Junior Hand Tool works best when secured in a vise. When tool is not secured in a vise, tool can only install 1/4", 3/8", and 1/2" clamps. Tool provides operator complete control over the clamp tensioning and the locking process. Junior clamp adapter mechanism is zinc plated for corrosion protection. Use Junior Clamps in Type 201 Stainless steel for higher strength, Type 316 Stainless Steel for higher corrosion and Galvanized Carbon Steel for best economy. Minimize

PLUS-Model Rotisserie rotates a body/frame 360 degrees, and ... Read more

PLUS-Model Rotisserie rotates a body/frame 360 degrees, and locks it in at any position...includes hydraulics for easy height adjustmentThis is how experts work in those hard-to-reach areas when doing a full frame-off restoration. Eastwood's PLUS Model Rotisserie includes an adjustable pivot point, with 2 hydraulic cylinders for height adjustment at the pivot point while mounting or working on your project. Also includes our unique balancer kits for raising and lowering the center of gravity. (No manual lifting involved.) Two 3-ton, 20 ram hydraulic cylinders for height adjustment at the pivot point2 Balancer Kits, including acme threaded rod and balancer block20 mounting height (14 with casters removed)Six easy-rolling 5 phenolic casters (2 locking)Bare steel unfinished3,000-lb. maximum capacityRestoration Rotisserie Plus Model Eastwood's Rotisserie gives you easier access to every part of the body/frame for welding, rust repair and other serious restoration tasks. Telescoping center bar extends to a full 19-1/2-foot length. Four 16 mounting arms (additional brackets may be required). Casters rated 500 lbs. each. Requires a minimum 7'6 ceiling height, and 67-wide clearance for base. 65 W x 57 H, 495 lbs. Also available as 12174 Restoration Rotisserie Plus in Blue Powdercoat. 1-year mfr's. warranty. Made in USA.Works for most vehicle types, but some additional mounting hardware may be required ask one of our phone reps for requirements for your specific vehicle.May require one of the Mounting Bracket Kits shown under the Accessories tab. Restoration, welding, painting, abrasive blasting, soda blasting Door Bars MIG, TIG Welders and Plasma Cutter 50095 Soda Blaster Gel Rust Dissolvers Rust Converters50544ZP 2K Ceramic CB Gloss and Activator50545ZP 2K Ceramic CB Satin and ActivatorMay require one of the following Mounting Bracket Kits13645 Mustang Kit (fits PRO Model)13646 Camaro Kit (fits PRO Model)13647 Mopar Front Brackets12178 Camaro Brackets (Rear Only)12181 U-Weld-It Leaf Spring Brackets12176 U-Weld-It Valance Brackets12182 U-Weld-It Uni-Plate Brackets Always make sure the vehicle is secure and balanced when using a rotisserie. Always wear eye, skin and respiratory protection. Read and understand instruction manual before using, since serious vehicle damage or bodily injury could occur. 12172 ATP-0109 BARE BODY ROTATOR SPIN SPINNER ROLL OVER EM123 RESTORATION BODY STANDARD ROTATE STAND TWIRL ROTISERY ROTICERY ROTISERE ROTICERE TILT TILTER TWIRLER RESTO ROTISERIE ROTISSERIES UNPAINTED WHIRLER WIRLER WURLER WHURLER roller rotisery body holder rotator Minimize

Epoxy Grip Anchor, Internally Threaded, 303 Stainless Steel ... Read more

Epoxy Grip Anchor, Internally Threaded, 303 Stainless Steel, Characteristics Friction Fit, Vibration Resistant, Thread Size 3/4-10, Thread Depth 1 1/2 In, Anchor Dia 1 In, Length 6 1/2 In, Drill Size 1 In, Min Embedment 7 1/2 In, Ultimate Tension In 4000 Psi Concrete 46,000 Lb Minimize

Cordless Clamp Driver, Volts 18.0 Vdc, Handle Type Pistol G ... Read more

Cordless Clamp Driver, Volts 18.0 Vdc, Handle Type Pistol Grip, Replacement Battery Pack 4wll5, Tool Length 9 1/2 In, Tool Weight 5.5 Lb, Includes 30 Minute 120v Charger, 2 Battery Packs, Belt Hook And Carrying Case Minimize