> Tools and Accessories > It

Quickly set-up, tune up, and check the accuracy of your sho ... Read more

Quickly set-up, tune up, and check the accuracy of your shops tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire. The A-LIGN-IT deluxe kit dial indicator reads in .001" of an inch increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot. Dial indicator mounting bar measures 3/4 x 3/4 x 11". Also includes a planer bar, and a precision 1/2" x 3-3/8" pin for drill press and router tests. Special spring and arbor nut to test saw blade and arbor run-out, 22 piece tip set for the dial indicator to meet any application. Includes hardware and hex wrench for assembly and instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines Minimize

Use to apply band, strapping and Free-End Clamps Spring-loa ... Read more

Use to apply band, strapping and Free-End Clamps Spring-loaded gripper lever and friction-held cutoff lever with plastic grip improves ease-of-use. Band Width = 3/8 in [Min], 1/4 in [Max] Tension Cap. = 2400 lb [Max] Applications = Band Clamping Strap Wt. = 4.40 lb MANUFACTURER: Band-It Weight: 4.44 lb(s) Case Pack: Each Minimize

Hoof care the easy & comfortable way! Easy on the horse and ... Read more

Hoof care the easy & comfortable way! Easy on the horse and the user, the Hoof-it(R) Stand gives you both the post and cradle integrated into one, innovative hoof stand. Features a shock absorbing, integrated rubber cradle and hoof post into one easy-to-use unit. Provides a stable and safe support for the horse, allowing the horse to relax without putting all of it's weight on you. *Magnet Not Included* For additional safety and stability when working with the Hoof-it(R)Stand try the following: Keep one foot on the base unit when working with the Hoof(R) Stand Do not leave the horses leg or hoof in the cradle or on the stand, when unattended. Developed for farriers, veterinarians and horse owners. The innovative design dramatically reduces your risk of getting injured during hoof care tasks. The stand is ideally suited for use with all types of horses, including older horses that require special support and comfort during hoof care tasks. The rubber cushioned cradle fits different hoof sizes and hugs the hoof. Let Hoof-it(R) Hoof Stand deal with the majority of the horses weight during any type of hoof care tasks, rather than your back or knees. Also available in Draft Horse size, see item # BIA61 and Junior Size #E003012 Minimize

Standard BAND-IT Ratchet Tool. For use on band widths of 3/ ... Read more

Standard BAND-IT Ratchet Tool. For use on band widths of 3/16" to 3/4". Heavy duty Ratchet style tensioner for 3/16" to 3/4" stainless steel banding. Tensions and cuts off the tail of the clamp being formed. Used to apply BAND-IT Stainless steel bands, Galvanized carbon steel band, BAND-FAST, general use band and miscellaneous strapping. Designed for easy loading and removing of material. Tool for use with medium strength applications. Minimize

Production Tool, Center Punch Style Preformed Clamps, Cfm @ ... Read more

Production Tool, Center Punch Style Preformed Clamps, Cfm @ Full Load 6.7, Required Pressure 100-120 Psi, Air Inlet Npt 1/4 In, Min. Hose Size 3/8 In, Tool Weight 98 Lb, For Use With 2lpd2 To 2lpd9, 2lpd1, 2lpf1, 2lpf2, 2lpf5 To 2lpg5 Minimize

Drill holes of difference centers up to 24" apart and up to ... Read more

Drill holes of difference centers up to 24" apart and up to 12" from the edge. Easy to read english and metric scales are indicated. A special V notch allows for diagonal 45 degree installation. Jig is made of virtually indestructible polycarbonate plastic and features hardened steel drill bushings for use with a standard 3/16" drill bit. Minimize

Use to apply band, strapping and Free-End Clamps Spring-loa ... Read more

Use to apply band, strapping and Free-End Clamps Spring-loaded gripper lever and friction-held cutoff lever with plastic grip improves ease-of-use. Band Width = 3/8 in [Min], 1/4 in [Max] Tension Cap. = 2400 lb [Max] Applications = Band Clamping Strap Wt. = 4.40 lb MANUFACTURER: Band-It Weight: 4.44 lb(s) Minimize

Ratchet Tool C4009 Item Number: C40099 Description BAND-IT ... Read more

Ratchet Tool C4009 Item Number: C40099 Description BAND-IT Ratchet Tool. Heavy duty windless type tensioner for 3/8" to 3/4" stainless steel as well as carbon steel banding in thickness up to 0.030". Highly portable, fast, reliable ratchet type tool. For sign hanging, insulaton work, general applications and other banding applications.* Tensions and cuts off the tail of the clamp being formed * Used to apply BAND-IT® Stainless steel bands, Galvanized carbon steel band, BAND-FAST®, general use Minimize

Need to punch brass or copper up to 24 gauge? We have the a ... Read more

Need to punch brass or copper up to 24 gauge? We have the answer in our 4-1/4 Tap-It Punch. Features a 1.5mm replaceable tip -two extra tips are included- for just the right size holes. Just place the metal to be punched between the anvil part and the punch tip and give it a light tap with a rawhide or plastic mallet. This method is much faster than using drills or other conventional methods. We recommend hammer HAM-360.05 for a well-made but economical hammer with a nylon head. Minimize

BAND-IT Bantam tool is used to install BAND-IT Band, BAND-I ... Read more

BAND-IT Bantam tool is used to install BAND-IT Band, BAND-IT Band with COLOR-IT, BAND-FAST, Galvanized Carbon Steel Band, VALU-STRAP, VALU-STRAP PLUS, Valuband, 304 Stainless Steel Band, BAND-IT Ties, 316 Uncoated & Coated Stainless Steel Band, 317L Stainless Steel Band and other specialty steels. Compact, lightweight, ratchet action tool with built in cutter. Designed for easy loading and removing of material. Useful in tight areas with minimal access. Zinc plated for corrosion resistance. 3 way handle adjusts for one or two-handed tensioning. Offers Low torque, and one handed installation. Minimize

CRL Adjustable Angle Clamp-It Tool Kit This CRL Adjustable ... Read more

CRL Adjustable Angle Clamp-It Tool Kit This CRL Adjustable Angle Clamp-It Assembly Tool Kit allows you to align it, hold it, and clamp it at multiple angles in five degree increments from 45 to 315 degrees. This handy and economical kit allows one to hold glass surfaces at odd angles while bonding with UV adhesives. Kit comes complete with two adjustable assembly squares and four 5" (127 mm) steel bar clamps. The adjustable squares are manufactured from high-impact, rigid polycarbonate to ensure strength and accuracy. The angle is held in place by interlocking teeth that can be adjusted by simply loosening a center knob. The bar clamps feature a 3/4" (19 mm) deep throat to clamp the center of the assembly square, and a 5" (127 mm) bar to accommodate panel thicknesses up to 2-1/2" (64 mm). Replaces Custom Clamping Jigs, Acts as a Third Hand, and Eliminates the Need for Long Clamps Economical Method for Holding Glass Surfaces in Place Catalog Number: UV28843 Also Available in These Catalogs: CRL73 Tools, Machin Minimize

Automatic Air Tool, Junior Style Preformed Clamps, Cfm @ Fu ... Read more

Automatic Air Tool, Junior Style Preformed Clamps, Cfm @ Full Load 6.7, Required Pressure 100-120 Psi, Air Inlet Npt 1/4 In, Min. Hose Size 3/8 In, Tool Weight 135 Lb, For Use With 2lpg8, 2lpg9, 2lph1 To 2lph9, 2lpj1 To 2lpj9 Minimize

DETAILS: Width = 5/8 in Thickness = 0.0300 in Length = 100 ... Read more

DETAILS: Width = 5/8 in Thickness = 0.0300 in Length = 100 ft Inside Material = Stainless Steel 201 Locking Type = Ear Lock Buckle Type = Band Wt. = 6.40 lb MANUFACTURER: Band-It Weight: 6.40 lb(s)Case Pack: 1 Roll Please note that item pictured may not be 100% representative of what is received. Image provided is sometimes a stock photo provided by the manufacturer so please read above description for further product detail. CONTACT US Whether your preferred method of communication is email or Minimize

MPN #OTC3550. OTC It, Torque Adapter Module. Most Diagnosti ... Read more

MPN #OTC3550. OTC It, Torque Adapter Module. Most Diagnostic Tools products are available for in-store pickup from Advance Auto Parts. Minimize

Boring Bar Set, Internal Threading Tool, Material C2 Microg ... Read more

Boring Bar Set, Internal Threading Tool, Material C2 Micrograin Carbide, Max. Depth 0.500 In, 0.600 In, 0.600 In, 0.750 In, 0.750 In, & 0.750 In, Shank Dia. 1/4 In, 1/4 In, 5/16 In, 5/16 In, 3/8 In, & 3/8 In, Hole Dia. 0.180 In, 0.200 In, 0.230 In, 0.290 In, 0.320 In, & 0.360 In, Cutting Angle 60 Degrees , Cutting Direction Right Hand, Finish Uncoated, Application Interal Threading, Number Of Pieces 6, Includes It-180500, It-200600, It-230600, It-290750, It-320750, & It-360750 Minimize

Banding Warehouse Kit, Stainless Steel Banding And Buckles, ... Read more

Banding Warehouse Kit, Stainless Steel Banding And Buckles, Stainless Steel, Nylon 11 Stainless Steel And Carbon Steel, Number Of Pieces 20, Includes (1) 2lnp6, (2) 2lnr3, (2) 2lnt1, (2) 2lnt3, (2) 2lnt5, (2) 2lnu9, (2) 2lnv1, (1) 2lpc9, (2) 2lpa7, (2) 2lpc2, (2) 2lpc3 Minimize

DETAILS: Features and Benefits:Patented micro-sanding discs ... Read more

DETAILS: Features and Benefits:Patented micro-sanding discs, utilizing Trizact technology, pinpoint sanding precisely where dirt is, keeping repair areas smaller than the size of a quarter Perfect-It Denibbing Polish: designed exclusively to polish out the sand scratch left by the 1500 denib abrasive - use with the 3M dual action polisher and on most paint colors a deliverable shine is obtained in one step, no swirl marks! Significant reduction in sling!Unlike traditional paint finishing tools Minimize

Band-Lok Tool A95079 Item Number: A95079 Description The Ba ... Read more

Band-Lok Tool A95079 Item Number: A95079 Description The Band-It Band-Lok Tool is a lightweight tool used to apply Band-Lok Stainless Steel Ties. Has adjustable tension and automatic cut off.Band-Lok Tool A95079 Instructions Contact seller for discounts on multiples Minimize

DETAILS: Color-coded for easy identification, these tough, ... Read more

DETAILS: Color-coded for easy identification, these tough, new totes feature a convenient carrying handle and see through design to show remaining band Corresponding width buckles required Width = 5/8 in Thickness = 0.0300 in Length = 100 ft Inside Material = Stainless Steel 201 Color = Green Locking Type = Ear Lock Buckle Type = Band Wt. = 6.85 lb MANUFACTURER: Band-It Weight: 6.51 lb(s)Case Pack: 1 Roll Please note that item pictured may not be 100% representative of what is received. Image p Minimize

M5 is the most sold model of all Logosol sawmills, so there ... Read more

M5 is the most sold model of all Logosol sawmills, so there is no doubt that it is a good sawmill. If you are not going to saw that much, or if you only going to use the sawmill for log house moulding, you can save some money by choosing a Logosol M5. The sawmill can work with all standard shape logs up to 5m (14 ft 9") length. Extensions are available to easily add length to process longer logs. Half metre extensions are normally added to provide extra length and support for longer logs. The low profile chain is available in 40cm (16"), 50cm (20") and 63cm (24") cutting lengths to handle most log diameters (even longer chains can be added to handle those extra large logs). Logs too large to place on the sawmill can be cut by placing the sawmill on the log.Made of anodized, extruded aluminum, weighs only 52kg (115lbs) the mill is extremely strong for it's size, easily supporting and lifting over ten times it's weight. The aluminium is of the highest quality available, in the same class as that used for aircraft construction. This mill is designed with the operator in mind. Everything is at the right height for long hours of operation without back strain. It is easy to use - no pushing the saw through the wood. The M5 is rust proof - all parts are weather resistant. Anodized aluminum, stainless steel bolts and nylon slides are used in the construction. There is very little to break, adjust or wear out in this mill.The logs are best handled on a log deck and the sawmill is designed to allow the logs to be rolled directly from the log table onto the log bed and to be sawn at a comfortable working height. The log is placed on one or two log shelves which can be moved up and down. One end of the log is held in place by a spiked bumper. The saw runs on a straight guide rail and saws the log very accurately. The special chain and blade allows the chain saw to cut straight with very high accuracy even in low grade quality saw logs. No "band-saw waves". The surface is so smooth on lumber finished with the M5, it can be finished with a belt sander. With the ease of log handling and positioning, using the independent log bed suspension, you can maximize the cutting of the log to produce the best lumber.The chain used on this sawmill is manufactured by the world's leading chainsaw manufacturer and has been proven as a reliable cutting solution, and produces an amazingly smooth surface. This narrow chain takes only 6 mm (1/4") kerf. Easily sharpened, these chains will last through 3000 bd. Ft of cutting. This sawmill has been designed with safety in mind. The chain pulls the wood against the bed, firmly holding it in place while cutting. The use of the mill involves both hands, keeping the possibility of accidents at a minimum.The two Log beds move up and down, separately allowing for easy leveling of the log to achieve the most productive cut. This feature also provides the ability to produce tapered and angle cuts. You can easily switch from 6 mm (1/4") to 3 mm (1/8") increments to produce lumber to the accuracy desired. Three pulleys combined with a nylon poly line provide maximum lifting capacity. Easily lifts a log up to 500kg (1100 lbs).Note:Mill does not include powerhead or table extension shown in picture.Looking for Logosol replacement parts? Visit our PartFINDER for the complete list. Minimize

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10- ... Read more

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Clamps Vises Pull-It/Moclamp Dyna-Mo C 205 OUR SKU# ZZJ1147 MPN: PU0205 Condition Brand New Shipping Free Shipping Leaves warehouse within 24 to 48 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for the inconvenience. Click here to read full description of Minimize

Heavy duty tool, designed specifically for applications tha ... Read more

Heavy duty tool, designed specifically for applications that require higher torque. Ideal for use with municipal applications and large diameter hose clamping. 25% larger tension screw, heavier handle and bearing than C00169. For applications requiring extra strength. Tensions over 3,300 pounds of force. Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping. Tensions and cuts off the tail of the clamp being formed. Drop forged tool with built in cutter. Spring loaded gripper lever improves ease-of-use, and improves band tensioning. Minimize