|
|
CONCRETE HOUSING LIFTER This large mouth concrete hous
... Read more
CONCRETE HOUSING LIFTER This large mouth concrete housing lifting clamp is designed to handle 4" to 6" thick sections without damaging the concrete seat. Lifter works on a variety of housing shapes and chain legs allow for quick positioning to balance the load. Concrete housing lift attachment requires constant tension to maintain positive load contact, while reverse cam action design eliminates load slippage tendency. Heavy duty steel construction and clamps have a durable enamel finish. Meets ASME B30.9 & B30.20 standards.
Minimize
|
|
Go To Store
|
|
|
|
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units pr
... Read more
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units provide space heating in factories, stores, warehouses, public buildings, workshops, or any exposed areas. Easy to install and service. Can be used in horizontal or vertical position. The bottom of the control box hinges for easy access to controls and wiring. Heating element, fan delay control, thermal cutout, motor and fan are easily reached without dismounting the heater. A threaded mounting hole in the top of the heater facilitates the attachment of the heater to a mounting bracket or other mounting assembly. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Totally enclosed motor features permanently lubricated bearings. Effective heat throws of 16' to 38'. Automatic fan delay with thermal cutout. Finished in a gray epoxy paint. Add the optional thermostat for more effiency. 16.50 L. 15.00 W. 16.00 H.
Minimize
|
|
Go To Store
|
|
|
|
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units pr
... Read more
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units provide space heating in factories, stores, warehouses, public buildings, workshops, or any exposed areas. Easy to install and service. The bottom of the control box hinges for easy access to controls and wiring. Heating element, fan delay control, thermal cutout, motor and fan are easily reached without dismounting the heater. A threaded mounting hole in the top of the heater facilitates the attachment of the heater to a mounting bracket or other mounting assembly. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Totally enclosed motor features permanently lubricated bearings. Effective heat throws of 16' to 38'. Automatic fan delay with thermal cutout. Finished in a gray epoxy paint. Add the optional thermostat for more effiency.
Minimize
|
|
Go To Store
|
|
|
|
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units pr
... Read more
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units provide space heating in factories, stores, warehouses, public buildings, workshops, or any exposed areas. Easy to install and service. The bottom of the control box hinges for easy access to controls and wiring. Heating element, fan delay control, thermal cutout, motor and fan are easily reached without dismounting the heater. A threaded mounting hole in the top of the heater facilitates the attachment of the heater to a mounting bracket or other mounting assembly. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Totally enclosed motor features permanently lubricated bearings. Effective heat throws of 16' to 38'. Automatic fan delay with thermal cutout. Finished in a gray epoxy paint. Add the optional thermostat for more effiency.
Minimize
|
|
Go To Store
|
|
|
|
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units pr
... Read more
INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units provide space heating in factories, stores, warehouses, public buildings, workshops, or any exposed areas. Easy to install and service. The bottom of the control box hinges for easy access to controls and wiring. Heating element, fan delay control, thermal cutout, motor and fan are easily reached without dismounting the heater. A threaded mounting hole in the top of the heater facilitates the attachment of the heater to a mounting bracket or other mounting assembly. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Totally enclosed motor features permanently lubricated bearings. Effective heat throws of 16' to 38'. Automatic fan delay with thermal cutout. Finished in a gray epoxy paint. Add the optional thermostat for more effiency.
Minimize
|
|
Go To Store
|
|
|
|
GLOBAL FLOOR MACHINES 20" Floor Cleaning Machine Global
... Read more
GLOBAL FLOOR MACHINES 20" Floor Cleaning Machine Global all-metal floor machines offer a low speed for use on wet hard floors and carpets. Heavy duty 1.5HP motor with triple planetary, all steel gear box transmission for long life and dependable service. Safety lock-out switch on handle with easy access thumb control. Floor scrubber includes pad driver and 50'L safety yellow power cord. Plugs into 120V AC outlet. Two rear mounted wheels for tilt and roll mobility when not in use. Measures 27"L x 48"H. 110V Motor. CSA listed. Warranty: 5 Year Motor & Housing, 1 Year Wear Items. 44.00 L. 21.00 W. 14.00 H.
Minimize
|
|
Go To Store
|
|
|
|
Kennedy 60" 12-Drawer Industrial Mobile Bench w/ Side Shelv
... Read more
Kennedy 60" 12-Drawer Industrial Mobile Bench w/ Side Shelves - Black Kennedy 60" 12-Drawer Industrial Mobile Bench is made with heavy duty 11 gauge steel frame and body for superior strength. Top surface of 1/8" thick steel and features raised edges on 3 sides to retain contents. Total unit capacity of 3,600 lbs. Cabinet doors are padlockable for security (lock sold separately). Includes tubular steel push handle. Moves easily on 8" x 2" phenolic casters (2 rigid, 2 swivel). Floor lock keeps cart in place. Black finish. Optional Work Surface adds a 1-1/2" thick maple top to your Versa-Bench . w/ Side Shelves 61.00 L. 36.00 W. 33.00 H.
Minimize
|
|
Go To Store
|
|
|
|
Kennedy 60" 6-Drawer Industrial Mobile Bench - Brown Kenne
... Read more
Kennedy 60" 6-Drawer Industrial Mobile Bench - Brown Kennedy 60" 6-Drawer Industrial Mobile Bench is made with heavy duty 11 gauge steel frame and body for superior strength. Top surface of 1/8" thick steel and features raised edges on 3 sides to retain contents. Total unit capacity of 3,600 lbs. Cabinet doors are padlockable for security (lock sold separately). Includes tubular steel push handle. Moves easily on 8" x 2" phenolic casters (2 rigid, 2 swivel). Floor lock keeps cart in place. Brown finish. Optional Work Surface adds a 1-1/2" thick maple top to your Versa-Bench . 61.00 L. 36.00 W. 33.00 H.
Minimize
|
|
Go To Store
|
|
|
|
Kennedy 48" 10-Drawer Industrial Mobile Bench - Brown Kenn
... Read more
Kennedy 48" 10-Drawer Industrial Mobile Bench - Brown Kennedy 48" 10-Drawer Industrial Mobile Bench is made with heavy duty 11 gauge steel frame and body for superior strength. Top surface of 1/8" thick steel and features raised edges on 3 sides to retain contents. Total unit capacity of 3,600 lbs. Cabinet doors are padlockable for security (lock sold separately). Includes tubular steel push handle. Moves easily on 8" x 2" phenolic casters (2 rigid, 2 swivel). Floor lock keeps cart in place. Brown finish. Optional Work Surface adds a 1-1/2" thick maple top to your Versa-Bench . 49.00 L. 36.00 W. 27.00 H.
Minimize
|
|
Go To Store
|
|
|
|
Room Air Conditioner Motor, Shaded Pole, Open Air-over, 1/1
... Read more
Room Air Conditioner Motor, Shaded Pole, Open Air-over, 1/10 Hp, 1000 Rpm, Number Of Speeds 5, 208-230 Volts, 2.3-2.3 Full Load Amps, 42y Nema Frame, Body Diameter 5 In, Service Factor 1.0, 60 Hz, Ring/stud Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 11 And 10 1/2 In, Ccwle Rotation, Ambient 40 C, Insulation Class B, Resilient Ring Diameter 2 1/4 In, Length Less Shaft 4 In
Minimize
|
|
Go To Store
|
|
|
|
Kennedy 48" 10-Drawer Industrial Mobile Bench - Red Kenned
... Read more
Kennedy 48" 10-Drawer Industrial Mobile Bench - Red Kennedy 48" 10-Drawer Industrial Mobile Bench is made with heavy duty 11 gauge steel frame and body for superior strength. Top surface of 1/8" thick steel and features raised edges on 3 sides to retain contents. Total unit capacity of 3,600 lbs. Cabinet doors are padlockable for security (lock sold separately). Includes tubular steel push handle. Moves easily on 8" x 2" phenolic casters (2 rigid, 2 swivel). Floor lock keeps cart in place. Red finish. Optional Work Surface adds a 1-1/2" thick maple top to your Versa-Bench . 49.00 L. 36.00 W. 27.00 H.
Minimize
|
|
Go To Store
|
|
|
|
C-HOOK PIPE LIFTER This Industrial Pipe Lifter Provide
... Read more
C-HOOK PIPE LIFTER This Industrial Pipe Lifter Provides A Quick And Efficient Way To Pick And Replace Precast Concrete Pipe. C-hook pipe lifter handles up to 8L sections of precast concrete pipe. Pipe lifter eliminates the need to dig a hole under the pipe, increasing productivity. Multiple lifting points allow handling of a variety of pipe lengths. Bail is designed to remain upright for easy attachment. Pipe lifter can be easily hooked and attached to hoists, cranes and forklifts. All welded steel construction. Replaceable non-skid urethane saddle prevents pipe from slipping off. Meets ANSI/AWS D14.1 requirements, as well as ASME B30.20 and BTH-1 2008 standards.
Minimize
|
|
Go To Store
|
|
|
|
INDUSTRIAL STRENGTH STEEL HAND TRUCK High quality, 1-1
... Read more
INDUSTRIAL STRENGTH STEEL HAND TRUCK High quality, 1-1/4" diameter steel tube trucks are perfect for day-to-day work in warehouse, receiving and delivery. MIG welded throughout with double welding at critical stress points to withstand rugged use. Curved Handle offers easiest load control. 10" x 3-1/2" full pneumatic ball bearing wheels offer best load protection and roll smoothly over roughest surfaces. Durable enamel finish resists rust and scratches. Has a 14" x 10" noseplate, integral Stair Climbers that use continuous friction reducing belts to ease movement up and down stairs, and a 350 lb. capacity Folding 24" Nose Extension to increase bulk carrying capacity. Shipped assembled. 5 Year Frame Warranty. Click here to see our full selection of Hand Trucks & Dollies. 52.50 L. 19.00 W. 17.00 H.
Minimize
|
|
Go To Store
|
|
|
|
1/2" Wire Rope Size Concrete Pipe Lifter Features: The mos
... Read more
1/2" Wire Rope Size Concrete Pipe Lifter Features: The most efficient method for handling of water and sewer concrete pipes Available in 10 sizes to handle from 1/2 to 1-1/4 cable and lift up to 50,000 pounds Wire rope ferrules available separately.
Minimize
|
|
Go To Store
|
|
|
|
1-3/8" Wire Rope Size Concrete Pipe Lifter Features: The m
... Read more
1-3/8" Wire Rope Size Concrete Pipe Lifter Features: The most efficient method for handling of water and sewer concrete pipes Available in 10 sizes to handle from 1/2 to 1-1/4 cable and lift up to 50,000 pounds Wire rope ferrules available separately
Minimize
|
|
Go To Store
|
|
|
|
1-1/4" Wire Rope Size Concrete Pipe Lifter Features: The m
... Read more
1-1/4" Wire Rope Size Concrete Pipe Lifter Features: The most efficient method for handling of water and sewer concrete pipes Available in 10 sizes to handle from 1/2 to 1-1/4 cable and lift up to 50,000 pounds Wire rope ferrules available separately
Minimize
|
|
Go To Store
|
|
|
|
3/4" Wire Rope Size Concrete Pipe Lifter Features: The mos
... Read more
3/4" Wire Rope Size Concrete Pipe Lifter Features: The most efficient method for handling of water and sewer concrete pipes Available in 10 sizes to handle from 1/2 to 1-1/4 cable and lift up to 50,000 pounds Wire rope ferrules available separately
Minimize
|
|
Go To Store
|
|
|
|
General Pipe Cleaners Sectional Machine (No Cable) Here's
... Read more
General Pipe Cleaners Sectional Machine (No Cable) Here's a sectional cable machine that drives 7/8" and 5/8" sections - or even 5/16" cables for small drain work. You switch from 7/8" to 5/8" and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables. The I-95 gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there's no additional torque build up. You also use the drive handle to carry the machine. And when it's in position on the job, its four point base gives it rock-solid stability. A cutter holder is attached to the back of the I-95, so your cutting heads are always with the machine. A Ground Fault Circuit Interrupter is standard equipment. Clear 1-1/2" - 2" lines with 5/16" x 25' cable. Clear 2" - 3" lines up to 125 feet long with 5/8" x 7-1/2' sections, or 4" lines up to 150 feet long with 7/8" x 15' sections. 17.50 L. 17.00 W. 16.00 H.
Minimize
|
|
Go To Store
|
|
|
|
|
from $150
(1 store)
See Details
|
|
|
|
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Hea
... Read more
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Heavy Slabs Of Concrete, Stone And Highly Polished Metal Sheets. Industrial Tongs are ideal for use in construction work to position slabs that must be protected from scratching. Curved urethane padded surfaces give proper contact for gripping a large range of smooth sized products. Slab mover is made with all welded steel and includes a semi-automatic latch that serves as an aid in positioning the tong when picking up the load. Easily hooks and attaches to hoists, cranes and forklifts for operation. Meets ANSI/AWS D14.1 welding requirements, as well as ASME B30.20 and BTH-1 2008 standards.
Minimize
|
|
Go To Store
|
|
|
|
1-3/4" Wire Rope Size Concrete Pipe Lifter Features: The m
... Read more
1-3/4" Wire Rope Size Concrete Pipe Lifter Features: The most efficient method for handling of water and sewer concrete pipes Available in 10 sizes to handle from 1/2 to 1-1/4 cable and lift up to 50,000 pounds Wire rope ferrules available separately.
Minimize
|
|
Go To Store
|
|
|
|
DUSTLESS 16 GALLON HEPA WET DRY VACUUM CLEANERS 7 DustBud
... Read more
DUSTLESS 16 GALLON HEPA WET DRY VACUUM CLEANERS 7 DustBuddie Kit DustBuddie Dust Shroud captures up to 99% of the dust created by a hand grinder--before it escapes into the air. Designed to be used with the Dustless Wet Dry Vacuum (sold separately), this dust control shroud fits most hand grinders and is quick and easy to install. Features a brush skirt, adjustable height, and removable front lip for smooth and accurate performance. Rides on a spring cushion, keeping the grinder flat so that dust won't escape. A short brush skirt improves lateral motion for grinding on uneven or textured surfaces. It is made of durable, clear polycarbonate for visibility. 7" fits most 6 to 9 hand grinders. Removable front lip for use against walls. Brush skirt improves handling. Dust Shroud helps protect workers' health, and saves time and money on cleanup. Front lip slides out so you can use it against a wall. The front lip will easily snap back into place for a quick return to work. Eliminate the hazard of airborne particles by controlling dust before it enters your environment. Port is designed to capture extremely fine dust. Meet EPA guidelines for lead paint removal in renovation projects.
Minimize
|
|
Go To Store
|
|
|
|
|
from $128
(1 store)
See Details
|
|
|
|
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Hea
... Read more
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Heavy Slabs Of Concrete, Stone And Highly Polished Metal Sheets. Industrial Tongs are ideal for use in construction work to position slabs that must be protected from scratching. Curved urethane padded surfaces give proper contact for gripping a large range of smooth sized products. Slab mover is made with all welded steel and includes a semi-automatic latch that serves as an aid in positioning the tong when picking up the load. Easily hooks and attaches to hoists, cranes and forklifts for operation. Meets ANSI/AWS D14.1 welding requirements, as well as ASME B30.20 and BTH-1 2008 standards.
Minimize
|
|
Go To Store
|
|
|
|
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Hea
... Read more
SLAB TONGS These Steel Tongs Allow Easy Lifting Of Heavy Slabs Of Concrete, Stone And Highly Polished Metal Sheets. Industrial Tongs are ideal for use in construction work to position slabs that must be protected from scratching. Curved urethane padded surfaces give proper contact for gripping a large range of smooth sized products. Slab mover is made with all welded steel and includes a semi-automatic latch that serves as an aid in positioning the tong when picking up the load. Easily hooks and attaches to hoists, cranes and forklifts for operation. Meets ANSI/AWS D14.1 welding requirements, as well as ASME B30.20 and BTH-1 2008 standards.
Minimize
|
|
Go To Store
|
|
|
|
Portable saw from Northern Industrial is designed to cut co
... Read more
Portable saw from Northern Industrial is designed to cut concrete, asphalt or both at the same time. Powered by a Honda GX-160 5.5 HP air-cooled engine that operates at 3600 RPM. Rotating h...
Minimize
|
|
Go To Store
|
|
|
|
MTM Hydro's 5000 psi Industrial Sand Blast Kit is perfect f
... Read more
MTM Hydro's 5000 psi Industrial Sand Blast Kit is perfect for the removal of graffiti, paint, and rust. Simply attach the housing to your wand and the probe to a bucket of sand. It's that easy! Comes with 25 feet of hose of extended range.
Minimize
|
|
Go To Store
|
|
|
|
Horizontal/Downflow Unit Heater, 25KW at 240V, 3Ph - Use
... Read more
Horizontal/Downflow Unit Heater, 25KW at 240V, 3Ph - Use as auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stock-rooms, offices, large or exposed areas or additions. One unit mounts either horizontally or vertically. Totally versatile. In addition, louvers adjust up and down for even greater control of throw direction. Louvers have stops to prevent complete closing of the discharge area. Horizontal and downflow in one unit. 360 positioning. Adjustable louvers. Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Forced air unit heater with 10 power ratings, from 3 KW to 50 KW heating output; 208, 240, 277 and 480V. 10,230 to 170,600 BTU/hr. 1- or 3-phase wiring on 5 through 10 KW 208/240V and 15 KW 208V units (field interchangeable). Branch circuit fusing (when required to meet NEC requirements for maximum 24 amps/ckt). 2- speed fan selector switch (25 to 50 KW models). Automatic control delays fan action until heating element is warm. When thermostat is satisfied fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. Automatic reset linear thermal cut-out capillary type, provides protection over entire length of element area. (Manual reset protection available on made-to-order basis). Specially designed venturi outlet to meet that added throw required in vertical position. Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps. Heavy gauge die-formed steel housing. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Rugged, totally enclosed motor. 208/240 Volts, 3 Phase, 52/60 Amps. 33.44 L. 31.13 W. 17.75 H.
Minimize
|
|
Go To Store
|
|
|
|
Horizontal/Downflow Unit Heater, 20KW at 208V, 3Ph - Use
... Read more
Horizontal/Downflow Unit Heater, 20KW at 208V, 3Ph - Use as auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stock-rooms, offices, large or exposed areas or additions. One unit mounts either horizontally or vertically. Totally versatile. In addition, louvers adjust up and down for even greater control of throw direction. Louvers have stops to prevent complete closing of the discharge area. Horizontal and downflow in one unit. 360 positioning. Adjustable louvers. Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Forced air unit heater with 10 power ratings, from 3 KW to 50 KW heating output; 208, 240, 277 and 480V. 10,230 to 170,600 BTU/hr. 1- or 3-phase wiring on 5 through 10 KW 208/240V and 15 KW 208V units (field interchangeable). Branch circuit fusing (when required to meet NEC requirements for maximum 24 amps/ckt). 2- speed fan selector switch (25 to 50 KW models). Automatic control delays fan action until heating element is warm. When thermostat is satisfied fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. Automatic reset linear thermal cut-out capillary type, provides protection over entire length of element area. (Manual reset protection available on made-to-order basis). Specially designed venturi outlet to meet that added throw required in vertical position. Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps. Heavy gauge die-formed steel housing. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Rugged, totally enclosed motor. 208 Volts, 3 Phase, 56 Amps. 24.75 L. 22.13 W. 17.00 H.
Minimize
|
|
Go To Store
|
|
|
|
Horizontal/Downflow Unit Heater, 3KW at 208V, 1Ph - Use a
... Read more
Horizontal/Downflow Unit Heater, 3KW at 208V, 1Ph - Use as auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stock-rooms, offices, large or exposed areas or additions. One unit mounts either horizontally or vertically. Totally versatile. In addition, louvers adjust up and down for even greater control of throw direction. Louvers have stops to prevent complete closing of the discharge area. Horizontal and downflow in one unit. 360 positioning. Adjustable louvers. Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Forced air unit heater with 10 power ratings, from 3 KW to 50 KW heating output; 208, 240, 277 and 480V. 10,230 to 170,600 BTU/hr. 1- or 3-phase wiring on 5 through 10 KW 208/240V and 15 KW 208V units (field interchangeable). Branch circuit fusing (when required to meet NEC requirements for maximum 24 amps/ckt). 2- speed fan selector switch (25 to 50 KW models). Automatic control delays fan action until heating element is warm. When thermostat is satisfied fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. Automatic reset linear thermal cut-out capillary type, provides protection over entire length of element area. (Manual reset protection available on made-to-order basis). Specially designed venturi outlet to meet that added throw required in vertical position. Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps. Heavy gauge die-formed steel housing. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Rugged, totally enclosed motor. 208 Volts, 1 Phase, 14.5 Amps. 19.50 L. 17.50 W. 12.00 H.
Minimize
|
|
Go To Store
|
