|
14 x 3 3/8 TrussLOK® Engineered Wood Fastener (250) - The T
... Read more
14 x 3 3/8 TrussLOK® Engineered Wood Fastener (250) - The TrussLOK® Engineered Wood Fastener is designed for joining multi-ply LVL, LSL and PSL. This fastener was developed with direct input from a leader in engineered wood, Trus Joist®. TrussLOK® is faster, easier and stronger than through-bolts and other structural self-drilling fasteners with similar diameters. TrussLOK® is approved for single-sided installation unlike nails and other screws of similar diameter that need to be installed from both sides. #14 diameter shank.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 300 Psi,
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 300 Psi, 0 To 2000 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 5, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
14 x 5 TrussLOK® Engineered Wood Fastener (250) - The Truss
... Read more
14 x 5 TrussLOK® Engineered Wood Fastener (250) - The TrussLOK® Engineered Wood Fastener is designed for joining multi-ply LVL, LSL and PSL. This fastener was developed with direct input from a leader in engineered wood, Trus Joist®. TrussLOK® is faster, easier and stronger than through-bolts and other structural self-drilling fasteners with similar diameters. TrussLOK® is approved for single-sided installation unlike nails and other screws of similar diameter that need to be installed from both sides. #14 diameter shank.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 100 Psi,
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 100 Psi, 0 To 700 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 2, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
CONCRETE HOUSING LIFTER This large mouth concrete hous
... Read more
CONCRETE HOUSING LIFTER This large mouth concrete housing lifting clamp is designed to handle 4" to 6" thick sections without damaging the concrete seat. Lifter works on a variety of housing shapes and chain legs allow for quick positioning to balance the load. Concrete housing lift attachment requires constant tension to maintain positive load contact, while reverse cam action design eliminates load slippage tendency. Heavy duty steel construction and clamps have a durable enamel finish. Meets ASME B30.9 & B30.20 standards.
Minimize
|
|
Go To Store
|
|
14 x 6 3/4 TrussLOK® Engineered Wood Fastener (250) - The T
... Read more
14 x 6 3/4 TrussLOK® Engineered Wood Fastener (250) - The TrussLOK® Engineered Wood Fastener is designed for joining multi-ply LVL, LSL and PSL. This fastener was developed with direct input from a leader in engineered wood, Trus Joist®. TrussLOK® is faster, easier and stronger than through-bolts and other structural self-drilling fasteners with similar diameters. TrussLOK® is approved for single-sided installation unlike nails and other screws of similar diameter that need to be installed from both sides. #14 diameter shank.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Compound Gauge, Dial Size (in.) 2-1/2, Range 30" Hg Vac To
... Read more
Compound Gauge, Dial Size (in.) 2-1/2, Range 30" Hg Vac To 30 Psi, -100 To 200 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 1, Smallest Graduation (in. Hg) 2, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
Vacuum Gauge, Dial Size (in.) 2-1/2, Range 30 To 0" Hg Vac,
... Read more
Vacuum Gauge, Dial Size (in.) 2-1/2, Range 30 To 0" Hg Vac, -100 To 0 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (in. Hg) 1, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
Includes 4 concrete fasteners to be used with concrete or b
... Read more
Includes 4 concrete fasteners to be used with concrete or brick projector installations.
Minimize
|
|
Go To Store
|
|
1/4 x 3 1/2 Flat Split Drive Anchor Zinc (100) - The split
... Read more
1/4 x 3 1/2 Flat Split Drive Anchor Zinc (100) - The split drive anchor is a one-piece tamper-resistant, pre-expanded anchor. The anchor is designed for use in solid base material such as concrete. They are available in high strength, heat-treated alloy steel, zinc plated in either a flat or round head style. Split anchor, split drive anchors, flat head split anchor, round head split anchor, split bolt anchor, sup-r-split, spike, drive anchor, CSD, countersunk split drive anchor.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 160 Psi,
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 160 Psi, 0 To 1100 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 2, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
1/4 x 2 1/2 Flat Split Drive Anchor Zinc (100) - The split
... Read more
1/4 x 2 1/2 Flat Split Drive Anchor Zinc (100) - The split drive anchor is a one-piece tamper-resistant, pre-expanded anchor. The anchor is designed for use in solid base material such as concrete. They are available in high strength, heat-treated alloy steel, zinc plated in either a flat or round head style. Split anchor, split drive anchors, flat head split anchor, round head split anchor, split bolt anchor, sup-r-split, spike, drive anchor, CSD, countersunk split drive anchor.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Diamond Core Drill Bit, Turbo Segments & Thin Wall for Aggr
... Read more
Diamond Core Drill Bit, Turbo Segments & Thin Wall for Aggressive Concrete Coring, 8 x 14 x 1-1/4-7 Thread
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 200 Psi,
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 200 Psi, O To 1400 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 5, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 400 Psi,
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 400 Psi, O To 2800 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 5, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
1/4 x 3 Flat Split Drive Anchor Zinc (100) - The split driv
... Read more
1/4 x 3 Flat Split Drive Anchor Zinc (100) - The split drive anchor is a one-piece tamper-resistant, pre-expanded anchor. The anchor is designed for use in solid base material such as concrete. They are available in high strength, heat-treated alloy steel, zinc plated in either a flat or round head style. Split anchor, split drive anchors, flat head split anchor, round head split anchor, split bolt anchor, sup-r-split, spike, drive anchor, CSD, countersunk split drive anchor.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
14 x 5 LedgerLOK® Ledger Board Fastener (250) - LedgerLOK®
... Read more
14 x 5 LedgerLOK® Ledger Board Fastener (250) - LedgerLOK® is the first fastener engineered to attach deck ledger boards to a wooden house structure with no pre-drilling. LedgerLOK® is approved in ACQ pressure treated lumber. The built-in washer head eliminates the need for an additional washer, saving time and money. #14 diameter shank.
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 60 Psi, O
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 60 Psi, O To 400 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 1, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 30 Psi, 0
... Read more
Pressure Gauge, Dial Size (in.) 2-1/2, Range 0 To 30 Psi, 0 To 200 Kpa, Dial Size (mm) 63, Connection Size 1/4" Npt, Connection Location Back, Smallest Graduation (psi) 0.5, Accuracy (%) +/-3-2-3, Case Material Stainless Steel, Socket Material Stainless Steel, Tube Material Stainless Steel, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (f) -40 Degrees To 150 Degrees , Manufacturers Warranty Length 1 Year
Minimize
|
|
Go To Store
|
|
1 1/4-12 Nylon Insert Locknut Zinc - Nylon insert locknuts
... Read more
1 1/4-12 Nylon Insert Locknut Zinc - Nylon insert locknuts are hex nuts with a nylon-filled collar. When a screw reaches the collar, the threads and nylon form a tight, frictional fit restricting movement of the screw when it is subjected to vibration. Designed to be used with like-material machine screws and bolts, nylon insert locknuts can be reused more times than a two-way reversible nut, however, nylon will begin to deteriorate at temperatures of 150°-350°F so they are not recommended for high temperature service. Typical hardness will reach a maximum of Rockwell C28. Nuts are manufactured to meet a proof load of 90,000 psi minimum.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
7/8-14 Nylon Insert Locknut Zinc - Nylon insert locknuts ar
... Read more
7/8-14 Nylon Insert Locknut Zinc - Nylon insert locknuts are hex nuts with a nylon-filled collar. When a screw reaches the collar, the threads and nylon form a tight, frictional fit restricting movement of the screw when it is subjected to vibration. Designed to be used with like-material machine screws and bolts, nylon insert locknuts can be reused more times than a two-way reversible nut, however, nylon will begin to deteriorate at temperatures of 150°-350°F so they are not recommended for high temperature service. Typical hardness will reach a maximum of Rockwell C28. Nuts are manufactured to meet a proof load of 90,000 psi minimum.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Maintenance Kit, For Use With 25 And 30 Hp Rotary Screw Com
... Read more
Maintenance Kit, For Use With 25 And 30 Hp Rotary Screw Compressors, Includes 2 Air Filters And 3 Oil Filters
Minimize
|
|
Go To Store
|
|
Pressure Conversion Kit, 125 Psi To 150 Psi, For Use With 4
... Read more
Pressure Conversion Kit, 125 Psi To 150 Psi, For Use With 40 Hp Air Compressor, Includes Sheave, Belt And Bushing
Minimize
|
|
Go To Store
|
|
1/4-28 Nylon Insert Locknut Zinc - Nylon insert locknuts ar
... Read more
1/4-28 Nylon Insert Locknut Zinc - Nylon insert locknuts are hex nuts with a nylon-filled collar. When a screw reaches the collar, the threads and nylon form a tight, frictional fit restricting movement of the screw when it is subjected to vibration. Designed to be used with like-material machine screws and bolts, nylon insert locknuts can be reused more times than a two-way reversible nut, however, nylon will begin to deteriorate at temperatures of 150°-350°F so they are not recommended for high temperature service. Typical hardness will reach a maximum of Rockwell C28. Nuts are manufactured to meet a proof load of 90,000 psi minimum.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1 1/4-7 Nylon Insert Locknut Zinc - Nylon insert locknuts a
... Read more
1 1/4-7 Nylon Insert Locknut Zinc - Nylon insert locknuts are hex nuts with a nylon-filled collar. When a screw reaches the collar, the threads and nylon form a tight, frictional fit restricting movement of the screw when it is subjected to vibration. Designed to be used with like-material machine screws and bolts, nylon insert locknuts can be reused more times than a two-way reversible nut, however, nylon will begin to deteriorate at temperatures of 150°-350°F so they are not recommended for high temperature service. Typical hardness will reach a maximum of Rockwell C28. Nuts are manufactured to meet a proof load of 90,000 psi minimum.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Diamond Core Drill Bit, Turbo Segments & Thin Wall for Aggr
... Read more
Diamond Core Drill Bit, Turbo Segments & Thin Wall for Aggressive Concrete Coring, 10 x 14 x 1-1/4-7 Thread
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Maintenance Kit, For Use With 40 And 50 Hp Rotary Screw Com
... Read more
Maintenance Kit, For Use With 40 And 50 Hp Rotary Screw Compressors, Includes 4 Air Filters And 3 Oil Filters
Minimize
|
|
Go To Store
|
|
Pressure Conversion Kit, 125 Psi To 175 Psi, For Use With 5
... Read more
Pressure Conversion Kit, 125 Psi To 175 Psi, For Use With 50 Hp Air Compressor, Includes Sheave, Belt And Bushing
Minimize
|
|
Go To Store
|
|
Communications Module, For Use With 25-50 Hp Rotary Screw C
... Read more
Communications Module, For Use With 25-50 Hp Rotary Screw Compressors, Includes Includes Communication Module And Necessary Cabling
Minimize
|
|
Go To Store
|
|
Pressure Conversion Kit, 125 Psi To 175 Psi, For Use With 4
... Read more
Pressure Conversion Kit, 125 Psi To 175 Psi, For Use With 40 Hp Air Compressor, Includes Sheave, Belt And Bushing
Minimize
|
|
Go To Store
|
