> Tools and Accessories > Concrete/store archer usa diamond blades dexpan demolition

PLEASE READ CAREFULLY. Dexpan has Amazing 18,000 PSI expans ... Read more

PLEASE READ CAREFULLY. Dexpan has Amazing 18,000 PSI expansive strength when mixed with common water. Dexpan is easy to use, just mix with water, pour into holes, then Dexpan expands. Dexpan cracks reinforced concrete, limestone, marble and granite safely and quietly. Dexpan works without noise, vibration, dust by providing silent expansive cracking. It is safe to use, NO special permits, training or equipment needed. MSDS (Material Safety Data Sheet) is available upon request. Go to our website for more technical information, training video, usage instructions. Three easy steps to use Dexpan: 1st, Drilling. Holes should be drilled no further than 1 ft (30 cm) apart. Recommended hole diameter is 1.5 in (3.8 cm). Drill holes should be 80-90% of the depth, do not go through. 2nd, Mixing. In a bucket, combine 0.4 gallons (1.5 liters) of water with one 11 lbs (5 kilograms) bag of DEXPAN. Mix well, using a drill and paddle is recommended. 3rd, Filling: Clean holes before filling. DEXPAN slurry should be poured into holes within 10-15 minutes after mixing, only fill the holes about 1/2 to 1 inch (2.5 cm) from the top. Agitating the DEXPAN in the hole to make sure no air is trapped in holes. A grouting pump might be required to fill horizontal holes. Caps might be needed for horizontal holes. Coverage: Normally one 44 lb (20 kg) box of DEXPAN can fill up to 36 lineal feet (10 meters) of 1.5 inches (3.8 cm) diameter holes. You might not have to fill up every hole depending on application. Cracking or Cutting Time: Properly mixed, the cracks may appear after 2 hours of filling drilled holes, depending on ambient temperature, humidity, rock or concrete hardness. Cautions: A pair of safety glasses, rubber gloves and a dust-proof mask is required. After filling DO NOT look directly into the holes as to avoid any accident to be caused by blow-out. Keep DEXPAN in DRY storage. Select the correct type of DEXPAN for your temperature range. Minimize

Vacuum Brazed Rescue / Demolition Diamond Blades with Elect ... Read more

Vacuum Brazed Rescue / Demolition Diamond Blades with Electroplated Side Protection 14 x 3.2mm x 1 Arbor. One Ultimate Diamond Blade cuts EVERYTHING! Bullet-Proof Glass, PVC, Plastic, Metal Roofs, Steel Bars and more. Minimize

Magnetic 10 Grinding Plate for Concrete Floor Diamond Grind ... Read more

Magnetic 10 Grinding Plate for Concrete Floor Diamond Grinding Shoes (MGS-H3040-MG sold seperately), For Aggressive Concrete Floor Grinding and Fast Removal. Minimize

Dexpan® Non-Explosive Controlled Demolition Agent #3 for 23 ... Read more

Dexpan® Non-Explosive Controlled Demolition Agent #3 for 23°F-50°F (-5°C-10°C), 44 lbs/box. Safe concrete demolition, rock breaking, mining and stone quarrying Minimize

10 Grinding Plate for Concrete Floor Diamond Grinding Shoes ... Read more

10 Grinding Plate for Concrete Floor Diamond Grinding Shoes (MGS-H3040 sold seperately), For Aggressive Concrete Floor Grinding and Fast Removal. Minimize

Dexpan® Non-Explosive Controlled Demolition Agent #1 for 77 ... Read more

Dexpan® Non-Explosive Controlled Demolition Agent #1 for 77°F-104°F (25°C-40°C), 44 lbs/box. Safe concrete demolition, rock breaking, mining and stone quarrying Minimize

Dexpan® Non-Explosive Controlled Demolition Agent #2 for 50 ... Read more

Dexpan® Non-Explosive Controlled Demolition Agent #2 for 50°F-77°F (10°C-25°C), 44 lbs/box. Safe concrete demolition, rock breaking, mining and stone quarrying Minimize

Diamond Blade, Dry Or Wet Cutting, Blade Type Segmented, Bl ... Read more

Diamond Blade, Dry Or Wet Cutting, Blade Type Segmented, Blade Dia 12 In, Arbor Hole 1 In, Width 0.125 In, Cutting Depth 3 5/8 In, Max Rpm 6300, Diamond Knockout 20mm, Application All Materials Except Asphalt, For Use With Hand Held Cut-off Saws, Grade Best, Package Quantity 1 Minimize

This 12"x.125 laser 911 fire rescue demolition blade has 4m ... Read more

This 12"x.125 laser 911 fire rescue demolition blade has 4mm rim, 1"-20mm arbor and designed for cutting on metal, chains, locks, iron fencing, rebar, steel, pipe, ductile iron, cast iron, copper, concrete, masonry, stone, stucco, HDPE, PVC, plastic, metal, roofing, steel studs, and more. Ideal for Power Cutter Saw. Minimize

5 PCD Grinding Blocks for Concrete Floor Grinding, Scraping ... Read more

5 PCD Grinding Blocks for Concrete Floor Grinding, Scraping and Removal Concrete Floor Coating, Epoxy, Glue. Minimize

Silent Core Bridge Saw Diamond Blade 14 x 3.2mm x 60mm / 50 ... Read more

Silent Core Bridge Saw Diamond Blade 14 x 3.2mm x 60mm / 50mm Arbor, 20mm High V-Segments, Super Aggressive Cutting, Long Tool Life, for Cutting Granite & Marble, Wet Use Minimize

Silent Core Bridge Saw Diamond Blade 12 x 3.0mm x 60mm / 50 ... Read more

Silent Core Bridge Saw Diamond Blade 12 x 3.0mm x 60mm / 50mm Arbor, 20mm High V-Segments, Super Aggressive Cutting, Long Tool Life, for Cutting Granite & Marble, Wet Use Minimize

Silent Core Bridge Saw Diamond Blade 18 x 3.6mm x 60mm / 50 ... Read more

Silent Core Bridge Saw Diamond Blade 18 x 3.6mm x 60mm / 50mm Arbor, 20mm High V-Segments, Super Aggressive Cutting, Long Tool Life, for Cutting Granite & Marble, Wet Use Minimize

Diamond Blade, Dry Or Wet Cutting, Blade Type Segmented, Bl ... Read more

Diamond Blade, Dry Or Wet Cutting, Blade Type Segmented, Blade Dia 16 In, Arbor Hole 1 In, Width 0.125 In, Cutting Depth 5 5/8 In, Max Rpm 5460, Diamond Knockout 20mm, Application All Materials Except Asphalt, For Use With Hand Held Cut-off Saws, Grade Best, Package Quantity 1 Minimize