> Tools and Accessories > A

Differential Pressure Gage, Pressure Range 0-100 In Wc, Rel ... Read more

Differential Pressure Gage, Pressure Range 0-100 In Wc, Relay Type 2 Dpdt, Rated 10 A@28 Vdc, 10 A @120/240 Vac, Accuracy +/-2% @70 Deg F Full Scale, Pressure Range Minor Div 2, Rated Total Pressure 20 In Hg To 25 Psig, Gage Connection 1/8 In Npt, Power Requirement 110 Vac @50/60 Hz, Dial Size 4 In, Compatible With Air And Non-combustible Gas, Ambient Operating Range 20 To 120 Deg F, Ce/ul/csa, Includes Instructions Minimize

DOWNFLOW UNIT HEATERS 5,000 Watt Heater 480V Heavy-dut ... Read more

DOWNFLOW UNIT HEATERS 5,000 Watt Heater 480V Heavy-duty, down flow heaters have a 16 gauge steel cabinet with an epoxy powder coat finish. These ceiling heaters feature a corrosion resistant element with steel sheath and steel spiral fins. Downflow heaters provide overheat protection with manual reset limit controls that de-energize when necessary. The control compartment has a hinged and latched access door for wiring, maintenance and installation. Heaters include OSHA safety wire guards to protect fan blades. Heaters have axial flow fan blade that provides a maximum of 1570 RPM. Heaters include totally enclosed single phase, permanently lubricated motors that are thermally protected for long life. Fan purge system allows the fan to operate after elements are de-energized to purge residual heat. Includes built-in 24 volt transformers for low voltage remote thermostat application. Down flow heaters can be easily mounted using optional mounting brackets (not included). UL approved. 1 Year Limited Warranty. 20.50 L. 20.50 W. 15.00 H. Minimize

The Trend H/JIG/A Hinge Jig is a portable template set desi ... Read more

The Trend H/JIG/A Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Includes long reach 15/32 inch diameter with 1/4 inch shank TCT router bit and 1-3/16 inch screw-on style guide bush.Trend H/JIG/A Hinge Jig Features: Four apertures for fire door requirements No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern Clean & accurate recesses are achieved every time Suitable for timber based doors & square butt hinges Angled position slots to prevent creep Use with a light duty router with 1/4 inch collet 4EK router requires a ref. U*UNIBASE Trend H/JIG/A Specifications: Length min: 2 5/8" Length max: 5" Width min: 3/8" Width max Door sizes possible: 1 3/8" Height min: 6'5" Height max: 6'10" Thickness min: 5/8" Trend H/JIG/A Includes: 4 x Apertures 2 x Bradawls 1 x 1/4" Shank TCT 15/32" Router Bit 1 x 5/8" Euro Style Guide Bush 1 x 5/8" Screw-on Style Guide Bush 1 x T-Handle Hex Key 1 x 4mm Spacing Gauge 1 x Fabric Storage Case Minimize

Single Stage Compressor Pump, Hp Rating 7 1/2 - 10 Hp, Numb ... Read more

Single Stage Compressor Pump, Hp Rating 7 1/2 - 10 Hp, Number Of Cylinders 4, Bore Size 3 3/4 Inches, Stroke 3 Inches, Oil Capacity 4 Quarts, Height 20 1/2 Inches, Width 25 Inches, Mounting Hole 9 5/8 X 8 Inches, Depth 21 1/8 Inches, Npt Outlet (f) 3/4 Inch, 4 Cycles, 125 Psi Minimize

Quickly set-up, tune up, and check the accuracy of your sho ... Read more

Quickly set-up, tune up, and check the accuracy of your shops tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire. The A-LIGN-IT deluxe kit dial indicator reads in .001" of an inch increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot. Dial indicator mounting bar measures 3/4 x 3/4 x 11". Also includes a planer bar, and a precision 1/2" x 3-3/8" pin for drill press and router tests. Special spring and arbor nut to test saw blade and arbor run-out, 22 piece tip set for the dial indicator to meet any application. Includes hardware and hex wrench for assembly and instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines Minimize

Spins and collates bulk 1/2" decorative upholstery pins We ... Read more

Spins and collates bulk 1/2" decorative upholstery pins We recommend the Turner and Seymour 1009 pin. Utilize in upholstery and reupholstery Must have at least 100 psi at tool Minimize

WE ARE SELLING SKF BEARINGS -CAT.NO 5310 A-2RS -LOCATION E2 ... Read more

WE ARE SELLING SKF BEARINGS -CAT.NO 5310 A-2RS -LOCATION E2-1 -THANKYOU - If you need to pay for item via credit card please contact us - MONDAY - FRIDAY 8am - 5pm - All items are described to the best of our knowledge. - We do not have the capabilities to test all equipment. - All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesnt work, only that we have not tested or checked it out. This may also mean that we are not kno Minimize

Also known as: ROB-17580, ROB17580; The ROB-17580 makes flu ... Read more

Also known as: ROB-17580, ROB17580; The ROB-17580 makes flushing of lines, evaporators and condensers fast and easy. Solvent circulates continuously through components (adapters are needed). Pulsing action loosens dirt, corrosion and other debris; by switching the hoses, you can also back flush. Air agitation needle valve bubbles air into liquid stream to enhance cleaning action. Contains adapters to mate with 1/4 flare and 3/8 quick disconnect fitting kits. Tank level sight glass for easy filling. 1-gallon of solvent is needed for the flush procedure. The unit purges solvent from the part, collecting the used material in the collection tank. An activated charcoal filter limits emissions and odors during flushing and purging. Specifications: Dimensions: 52 H x 33 W x 20 D Supply Pressure: 80-150 psi. Minimize

DOWNFLOW UNIT HEATERS 7,500 Watt Heater 480V Heavy-dut ... Read more

DOWNFLOW UNIT HEATERS 7,500 Watt Heater 480V Heavy-duty, down flow heaters have a 16 gauge steel cabinet with an epoxy powder coat finish. These ceiling heaters feature a corrosion resistant element with steel sheath and steel spiral fins. Downflow heaters provide overheat protection with manual reset limit controls that de-energize when necessary. The control compartment has a hinged and latched access door for wiring, maintenance and installation. Heaters include OSHA safety wire guards to protect fan blades. Heaters have axial flow fan blade that provides a maximum of 1570 RPM. Heaters include totally enclosed single phase, permanently lubricated motors that are thermally protected for long life. Fan purge system allows the fan to operate after elements are de-energized to purge residual heat. Includes built-in 24 volt transformers for low voltage remote thermostat application. Down flow heaters can be easily mounted using optional mounting brackets (not included). UL approved. 1 Year Limited Warranty. 20.50 L. 20.50 W. 15.00 H. Minimize

DOWNFLOW UNIT HEATERS 10,000 Watt Heater 208V Heavy-du ... Read more

DOWNFLOW UNIT HEATERS 10,000 Watt Heater 208V Heavy-duty, down flow heaters have a 16 gauge steel cabinet with an epoxy powder coat finish. These ceiling heaters feature a corrosion resistant element with steel sheath and steel spiral fins. Downflow heaters provide overheat protection with manual reset limit controls that de-energize when necessary. The control compartment has a hinged and latched access door for wiring, maintenance and installation. Heaters include OSHA safety wire guards to protect fan blades. Heaters have axial flow fan blade that provides a maximum of 1570 RPM. Heaters include totally enclosed single phase, permanently lubricated motors that are thermally protected for long life. Fan purge system allows the fan to operate after elements are de-energized to purge residual heat. Includes built-in 24 volt transformers for low voltage remote thermostat application. Down flow heaters can be easily mounted using optional mounting brackets (not included). UL approved. 1 Year Limited Warranty. 20.50 L. 20.50 W. 15.00 H. Minimize

Toolmaker Microscope, Optical Tube Monocular, Broken Cross ... Read more

Toolmaker Microscope, Optical Tube Monocular, Broken Cross Hair Reticle, Adjustable Diopter, Eyepiece Protractor Range 360 Degrees, Graduations 1 Degree, Magnification Total 30x, Illumination 25 Volt, 2 Watt Halogen, Adjustable Light Intensity, Focusing Height Maximum 4.53 In, Measuring Unit Digital Micrometer Head, Maximum Workpiece Height 4.5 In, Table Travel X Axis 2 In, Y Axis 2 In, Table Size 6 X 6 In, Glass Stage Area 3.78 X 3.78 In, Capacity 11 Lb Max, Includes Micrometer Minimize

The Mitutoyo 178-954-4A Surftest SJ-301 is a portable surfa ... Read more

The Mitutoyo 178-954-4A Surftest SJ-301 is a portable surface roughness tester with an LCD touch screen, customizable 38-parameter measurement capabilities, a built-in graphing and alphanumeric thermal printer, RS232C or statistical process control (SPC) output, and is powered by either an AC adapter or a built-in Ni-H battery that provides approximately 600 measurements per charge. A surf tester, also known as a profilometer, surface roughness tester, roughness gage, surftest, or surface finish gage, is a metrology device used to inspect and measure surface roughness in statistical processing, histogram-based data management, manufacturing, and quality control (QC) applications. This surface tester has a large (3.94 x 2.76 inches [H x W]) LCD display with a touch-panel screen that allows for customizable parameters, a Go/No-go judgment function, total and sectional measurement results, assessed profiles, bearing area curve (BAC 1/2) calculation, and amplitude distribution curve graphing results. Shop-hardened measure and start buttons resist workshop contaminants. The device has vertical and horizontal recording magnification abilities, and can measure at any orientation, including vertical or upside-down. Auto calibration measures 38 parameters and four profiles, and the device stores up to five measurement sets, including evaluation, sampling, and statistical data. A data-deletion function allows on-screen elimination of flawed data from a calculation prior to an evaluation. Measurement data can be saved in CSV file format using the memory card port, and transferred to a computer for use with compatible spreadsheet software. Internal memory stores up to five measurement sets, and the device can store up to 20 measurement sets with an optional memory card. For maneuverability, the drive can be detached from the display unit with a cable. Auto calibration on the SJ-301 can be initiated with a numerical entry. An auto-sleep function automatically powers the device off after five minutes of inactivity. Calculation and display parameters are customizable. The Go/No-go” judgment function operates with maximum value of 16% rule option, and 3-parameter upper and lower limits setting. The Surftest has a digimatic SPC cable for data collection, and RS-232C or SPC output. A memory card slot supports additional data storage. It is compatible with Microsoft Windows 2000 SP4, Windows XP, Windows Vista, and Windows 7 operating systems, and Microsoft Excel 2000, Excel 2002, and Microsoft Office Excel 2007. The unit comes with a carrying case that has a belt loop attachment. Specifications Drive unit type Standard Detector type 4mN measuring force, 5μm, 90 degree, diamond stylus tip radius, 1.57 inch (40 mm), 400 mN or less, detection by differential inductance International surface roughness standards met Japanese Industrial Standard (JIS) (1982, 1994, and 2001), International Organization for Standardization (ISO), Verband der Autobobilindustrie (VDA), and American National Standards Institute (ANSI) Measuring range X-axis: .5 inches (12.5mm); Z-axis 13780μinch (-7880μinch to +5900μinch) (350μm [-200μm to +150 μm]) Parameters Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3z, mr (c), Rpk, Rvk, δc, Rk, Mr1, Mr2, Lo, Ppi, R, AR, Rx, A1, A2, Vo, HSC, mr, SK, Ku, Δa, Δq, Wte, Wx, W, AW, Rz1max (ISO), Rmax-customizable (VDA, ANSI) Assessed profile Primary profile (P), roughness profile (R), DIN4776, MOTIF-R, MOTIF-W Printer Thermal; high resolution, high-speed, graphing and alpha-numeric capabilities. Display: 48 mm width, prints on 58 mm paper Recording Magnifications Vertical 10X to 100,000X, auto. Horizontal 1X to 1,000X, auto Overall dimensions 12.09 x 3.7 x 6.5 inches/307 x 94 x 165 mm (H x W x D) Power supply AC adapter, or built-in rechargeable battery Weight 2.65 lb. (1.2kg)   H is height, the vertical distance from the lo Minimize

Enerpac introduces the Ms Series maintenance sets. These hy ... Read more

Enerpac introduces the Ms Series maintenance sets. These hydraulic cylinders are used for industrial applications such as; lifting, pushing, or pulling and are available in a range of force capacities, stroke lengths or size restrictions. This adjustable extension is an attachment used for the Ms Series and has a capacity of 5 tons. Only use attachments provided with set. Non Enerpac attachments and longer extension tubes will reduce column strength, potentially creating unsafe conditions. Minimize

23737 Frame Style: A (part# 23737) A-Frame Machine with: A ... Read more

23737 Frame Style: A (part# 23737) A-Frame Machine with: A-1 Mitt - A-12 Pin Key - A-34-12 Rear Guide Hose A-Frame Machine with: A-1 Mitt - A-12 Pin Key - A-34-12 Rear Guide Hose - Five Sections of 7/8'' (C-10) Cable, Total 75 Feet - A-8 Cable Cutter - T-101 Straight Auger - T-102 Funnel Auger - T-107 Spade Cutter - T-125 Retrieving Auger - T-150-1-3'' Sharktooth Cutter - A-3 Tool Box B-Frame Machine with: A-1 Mitt - A-12 Pin Key - A-34-12 Rear Guide Hose - Five Sections of 7/8'' (C-10) Cable, Total 75 Feet - A-8 Cable Cutter - T-101 Straight Auger - T-102 Funnel Auger - T-107 Spade Cutter - T-125 Retrieving Auger - T-150-1-3'' Sharktooth Cutter - A-3 Tool Box This item features: -Offers many features of heavier-duty K-1500 Machine in a lighter-weight design. -Unique, easy-to-use instant-acting cable clutch maximizes operator control: - Pull handle down, cable spins at 640 RPM - Release handle, frees cable instantly, no overrun. -Equipped to spin easy-to-handle 15-foot sections of 7/8'' cable to clean 2'' to 4'' lines through 175 feet. -Change clutch jaws to run 7-1/2-foot sections of 5/8'' cable to clean 1-1/4'' to 4'' lines through 125 feet. -Available in both upright ''A'' and low-profile ''B'' drame styles. -NOTE: To adapt K-75 to run 5/8'' cable requires A-376-X jaw set (No. 59330) and 5/8'' cable kit (No. 48472). -For tools and cables for K-75 refer to model K-60SP accessory chart. -Pipe Diam: 1 1/4 in [Min], 4 in [Max]. -Speed: 640 rpm. -Power Cap.: 1/2 hp [Max]. -Type: Cable Drain Cleaner. -Price is for 1 Each. Testing and approvals: -Approved to UL Standards (NRTLC). Minimize

New Baron Tools 2.5 Horizontal Gas Engine Specifications: H ... Read more

New Baron Tools 2.5 Horizontal Gas Engine Specifications: High quality Gas engine, this engine is tuned for a go kart Horizontal shaft that is an industry standard 5/8" diameter, 2 1/4" long with a 1 3/4" long keyway. Low oil sensor with automatic shut-off. Choke lever and Throttle lever that can be operated by the lever or by the cable. Cooling system: forced air Ignition system: Transistorized PTO shaft rotation: counterclockwise Type: Single cylinder, 4-stroke Displacement: 97cm3 Bore and Stroke: 52 x 46 On/off switch for easy operation Fuel Capacity: 1.4 liters 3 1/8" x 6 3/8" bolt holes to base plate for mounting Owner's Manual Weight:25 lbs. Minimize

The new Earlex Spray Station 5500 is the choice of tradesme ... Read more

The new Earlex Spray Station 5500 is the choice of tradesmen serious DIY enthusiasts. Completely redesigned with improved atomization, more CFM, more PSI and increased air flow. Simply plug in the unit, fill the cup with almost any type of paint, select your flow, fan orientation spray width (up to 12), and start painting The HVLP gun sprays lacquers, enamels, urethanes, high build primers, more. Features a powerful 650w tapered fan turbine motor delivering 42 cfm for a even spray pattern, Teflon coated cup, 2.0mm stainless steel needle/nozzle set, 13' air hose, 5' 6 powerImproved atomization, more CFM, more PSI, increased air flow The new Earlex Spray Station 5500 is the choice of tradesmen serious DIY enthusiasts. Completely redesigned with improved atomization, more CFM, more PSI and increased air flow. Simply plug in the unit, fill the cup with almost any type of paint, select your flow, fan orientation spray width (up to12), and start painting The HVLP gun sprays lacquers, enamels, urethanes,high build primers, more. Features a powerful 650w tapered fan turbine motor delivering 42 cfm for a even spray pattern, Teflon coated cup, 2.0mm stainless steel needle/nozzle set, 13' air hose, 5' 6 power Model 5500 Earle Spray Station 51390 C 1.5 Fluid Needle51390 D 2.0 Fluid Needle51390 E 2.5 Fluid Needle51390 F Complete Spray Gun51390 G Spare Parts kit Always wear eye, skin and respiratory protection when painting.Always paint in a well ventilated area away from open flames.Read mfg'er instructions before using this equipment 13227 A 5016501003001 HV5500US airless earlex accuspray turbine paint gun hvlp devilbiss iwata sata electric Minimize

This kit is a great value for the serious jewelry artist. T ... Read more

This kit is a great value for the serious jewelry artist. The Foredom 2230 Kit includes the SR motor used and favored in the jewelry industry world wide. The upgraded Foredom 1/6 hp, ball bearing, hang-up style motor with speeds up to 18,000 rpm operates in both forward and reverse rotation (left handed users will appreciate this feature). The foot operated speed control has solid state electronics and comes in a heavy duty plastic housing with an extra wide design. The #30 Hand piece is the most popular general purpose hand piece featuring a 3-jaw, geared chuck with a 0-5/32" capacity...that means it can accept mandrels from the size of a hair up to 5/32". A chuck key is provided for tool changes. For those who want the speed and ease of changing tools quickly, select the Foredom 2220 Kit which includes a quick change hand piece. The quick change hand piece will save time and aggravation since polishing steps can take just a few seconds and plenty of grit changes are needed for each job. Rather than use the chuck over and over, the quick change hand piece allow the user to flip a lever on the shaft, replace the tool, close the lever and get back to work. The Accessory Kit consists of a 54 pc. assortment of professional jewelers accessories. You'll find Trizact bands, ScotchBrite EXL wheels, silicone wheels and polishers, brushes and more. Kit also includes Rotating Bur and Tool Holder for 3/32" shank accessories and a tube of shaft grease. Minimize

Complete fall protection system available in convenient con ... Read more

Complete fall protection system available in convenient container. Includes 5-point harness, resuable roof anchor bracket, 5/8 rope grab with 2' shock absorber and 50' of 5/8 blend rope lifeline with attached snap hook. Please allow 10-14 day lead time for this item. Minimize

Automotive Multimeter Kit, Voltage 600 Mv-1000 Ac, Voltage ... Read more

Automotive Multimeter Kit, Voltage 600 Mv-1000 Ac, Voltage 600 Mv-1000 Dc, 60 Ma-10 Amps Ac, 60 Ma-10 Amps Dc, 600-50m Ohms, Basic Dc Accuracy +/-0.1% +1 Digit, Safety Rating Cat Iv 600 V, Cat Iii 1000 V, Lcd Display, 30-9000/60-12,000 Rpm Range, Limited Lifetime Warranty, Includes 3mu86 Leads, 3mu87 Probes, 3mu85 Alligator Clips, 4xl48 Hanger, 4yv85 Temp Probe, 5u843 Rpm Pick-up, 2 Probe Pins, Insulation Piercing Clip, 5u830 Case, 4ye79 Holster, 9v Battery, Instructions Minimize

Differential Pressure Gage, Pressure Range 0-2 In Wc, Relay ... Read more

Differential Pressure Gage, Pressure Range 0-2 In Wc, Relay Type 2 Dpdt, Rated 10 A@28 Vdc, 10 A @120/240 Vac, Accuracy +/-2% @70 Deg F Full Scale, Pressure Range Minor Div 0.05, Rated Total Pressure 20 In Hg To 25 Psig, Gage Connection 1/8 In Npt, Power Requirement 110 Vac @50/60 Hz, Dial Size 4 In, Compatible With Air And Non-combustible Gas, Ambient Operating Range 20 To 120 Deg F, Ce/ul/csa, Includes Instructions Minimize

Differential Pressure Gage, Pressure Range 0-3 In Wc, Relay ... Read more

Differential Pressure Gage, Pressure Range 0-3 In Wc, Relay Type 2 Dpdt, Rated 10 A@28 Vdc, 10 A @120/240 Vac, Accuracy +/-2% @70 Deg F Full Scale, Pressure Range Minor Div 0.1, Rated Total Pressure 20 In Hg To 25 Psig, Gage Connection 1/8 In Npt, Power Requirement 110 Vac @50/60 Hz, Dial Size 4 In, Compatible With Air And Non-combustible Gas, Ambient Operating Range 20 To 120 Deg F, Ce/ul/csa, Includes Instructions Minimize

The Tool Box Startup includes 6 DymaSerts (3X), 6 Cases, 9 ... Read more

The Tool Box Startup includes 6 DymaSerts (3X), 6 Cases, 9 Wedges, Tool Box, Punch and Hammer. The Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. Dyma-Serts grind five times faster than grinding stones and last longer. They can grind up to 30,000 square feet of grinding action on a standard 3,500 PSI concrete, and can be used for wet or dry grinding. The Dyma-Serts are ideal for grinding terrazzo, repairing surface damage to concrete slabs, smoothing rough surfaces or trowel marks, leveling high spots, and grinding sharp aggregates such as flint and granite. Use them to remove urethane or epoxy thincoats, surface imperfections from epoxy mortars, as well as thin mastics and thin-sets. The holding cases are essential for the Dyma-Serts to snap into, and are re-usable. Once a Dyma-Sert gets work down or damaged, snap them out and replace them. The wedges are wooden and are used to wedge the holding case into the Grinder's multi-accessory disc. Minimize