> Tools and Accessories > 20 air 20 conditioner/store the sportsman guide

Air Cylinder, Double Acting, Steel Nfpa, 6 In. Bore Dia., 2 ... Read more

Air Cylinder, Double Acting, Steel Nfpa, 6 In. Bore Dia., 20 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/2 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 28.25 Total Length (in.), 7068 Max. Load (lb.), Steel, Steel Body Material, Black Finish, Steel, Chrome Plated Steel, Steel, Steel, 1-3/8 Rod Dia. (in.), 1-14 Rod Thread (in.), 1-5/8 Rod Thread Length (in.), Meets Nfpa Minimize

Generac 5887 One of the most powerful air-cooled generators ... Read more

Generac 5887 One of the most powerful air-cooled generators on the market today, this unit provides whole house power protection for many homes. In addition to essential circuit coverage, the 20 kW unit can back up multiple air conditioners and remaining rooms in your home like home theaters and offices. Includes: -True Power® Electrical Technology -Two Line LCD Tri-lingual Digital Nexus Controller -Electronic Governor -External Main Circuit Breaker, System Status & Maintenance Interval LED Indicators and GFCI Duplex Outlet -Flexible Fuel Line Connector -Composite Mounting Pad -Base Fascia -Natural Gas or LP Gas Operation -UL 2200 Listed Specifications -Max Continuous Power Capacity (LP): 20,000 Watts* -Max Continuous Power Capacity (NG): 18,000 Watts* -Voltage: 120/240 -Max Continuous Load Current-240 Volts: 83.3 LP/75 NG -Total Harmonic Distortion: Less than 5% -Main Line Circuit Breaker:100 Amp -Phase:1 -Rotor Poles:2 -AC Frequency: 60Hz -Power Factor:1 -Battery: Not included -Group 26R 12 Volts and 525 Cold-cranking Amperes Minimum -Weight: 451 Pounds -Dimensions: 48 x 25 x 29 -Sound output in dB(A) at 23 ft. with generator operating at normal load: 66 -Sound output in dB(A) at 23 ft. with generator in Quiet-Test™ low speed exercise mode: 60 3600 Qualifies for $50/$50 Generac Referral Program $50/$50 Generac Referral Program Minimize

Wooden return air grilles are a quality alternative to stam ... Read more

Wooden return air grilles are a quality alternative to stamped metal grilles. Return air grilles allow easy access for filter replacement, cleaning or duct inspection. Decorative return air grilles are pre-primed with an oil-based primer. These Return Air Grilles are engineered to ensure proper airflow so HVAC systems can work effectively. Replace your ugly, worn-out return air grille with one designed for style as well as excellent performance. If an unsightly return air grille detracts from the beauty of your home, then we have the easy solution. Simply upgrade it with one of these wooden return air grilles that can be left white or easily painted to blend into any wall or ceiling. Each Return Air Grille features a patented locking system that provides secure installation without visible latches or screws. These decorative return air grilles feature wide louvers that hide dust and an air filter, if needed. Available in assorted sizes, the decorative Return Air Grille includes wooden louver frame and 26-gauge metal frame housing that can hold a 1" thick filter (not included). Benefits of the Return Air Grille: Minimize

Horizontal/Downflow Unit Heater, 20KW at 208V, 3Ph - Use ... Read more

Horizontal/Downflow Unit Heater, 20KW at 208V, 3Ph - Use as auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stock-rooms, offices, large or exposed areas or additions. One unit mounts either horizontally or vertically. Totally versatile. In addition, louvers adjust up and down for even greater control of throw direction. Louvers have stops to prevent complete closing of the discharge area. Horizontal and downflow in one unit. 360 positioning. Adjustable louvers. Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Forced air unit heater with 10 power ratings, from 3 KW to 50 KW heating output; 208, 240, 277 and 480V. 10,230 to 170,600 BTU/hr. 1- or 3-phase wiring on 5 through 10 KW 208/240V and 15 KW 208V units (field interchangeable). Branch circuit fusing (when required to meet NEC requirements for maximum 24 amps/ckt). 2- speed fan selector switch (25 to 50 KW models). Automatic control delays fan action until heating element is warm. When thermostat is satisfied fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. Automatic reset linear thermal cut-out capillary type, provides protection over entire length of element area. (Manual reset protection available on made-to-order basis). Specially designed venturi outlet to meet that added throw required in vertical position. Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps. Heavy gauge die-formed steel housing. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Rugged, totally enclosed motor. 208 Volts, 3 Phase, 56 Amps. 24.75 L. 22.13 W. 17.00 H. Minimize

Portable Breathing Air Compressor, Air Flow 21 Cfm, Power R ... Read more

Portable Breathing Air Compressor, Air Flow 21 Cfm, Power Rating 2 Hp, Voltage Rating 115/230 Vac, Current Rating 20/10 Amps, Intake Filter Bac-20f, Operates 4 Tight Fitting Masks Or 3 Hoods, Hansen Fittings, Oil Less Pump Minimize

Air Cylinder, Double Acting, Stainless Steel Nfpa, 2-1/2 In ... Read more

Air Cylinder, Double Acting, Stainless Steel Nfpa, 2-1/2 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Front Flange, Cushion Type Adjustable, 3/8 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 26.531 Total Length (in.), 1227 Max. Load (lb.), Aluminum, Stainless Steel Body Material, Silver Finish, Stainless Steel, Stainless Steel, Stainless Steel, Stainless Steel, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.) Minimize

Wooden return air grilles are a quality alternative to stam ... Read more

Wooden return air grilles are a quality alternative to stamped metal grilles. Return air grilles allow easy access for filter replacement, cleaning or duct inspection. Decorative return air grilles are pre-primed with an oil-based primer. These Return Air Grilles are engineered to ensure proper airflow so HVAC systems can work effectively. Replace your ugly, worn-out return air grille with one designed for style as well as excellent performance. If an unsightly return air grille detracts from the beauty of your home, then we have the easy solution. Simply upgrade it with one of these wooden return air grilles that can be left white or easily painted to blend into any wall or ceiling. Each Return Air Grille features a patented locking system that provides secure installation without visible latches or screws. These decorative return air grilles feature wide louvers that hide dust and an air filter, if needed. Available in assorted sizes, the decorative Return Air Grille includes wooden louver frame and 26-gauge metal frame housing that can hold a 1" thick filter (not included). Benefits of the Return Air Grille: Minimize

Refrigerated Compressed Air Dryer, Air Flow @ 50 Degrees Fa ... Read more

Refrigerated Compressed Air Dryer, Air Flow @ 50 Degrees Fahrenheit Dew Point Pressure At 125 Psig 20 Cfm, Air Flow @ 50 Degrees Fahrenheit Dew Point Pressure At 175 Psig 23 Cfm, Power Rating 5/8 Hp, Female Npt Inlet/outlet 1/2 Inches, Maximum Air Compressor Power @ 175 Psi 5 Hp, Maximum Compressor Power @ 125 Psi 5 Hp, Voltage @ 60 Hz 115 Volts, Height 28 Inches, Depth 13 Inches, Width 10 Inches, Combination Aftercooler/separator/filter Minimize

Air over pump and ram shop press. U.S.A. Continuous Force ( ... Read more

Air over pump and ram shop press. U.S.A. Continuous Force (Tons): 20, Working Range (in.): 1 1/2 x 33, Inside Bed Dimensions L x W (in.): 23 3/4 x 24 Includes press accessory kit: press plates, b... Minimize

Air Cylinder, Double Acting, Aluminum Nfpa, 6 In. Bore Dia. ... Read more

Air Cylinder, Double Acting, Aluminum Nfpa, 6 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/2 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 28.75 Total Length (in.), 7068 Max. Load (lb.), Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 1-3/8 Rod Dia. (in.), 1-14 Rod Thread (in.), 1-5/8 Rod Thread Length (in.), Meets Nfpa Minimize

Air Cylinder, Double Acting, Small Bore Nfpa, 1-1/8 In. Bor ... Read more

Air Cylinder, Double Acting, Small Bore Nfpa, 1-1/8 In. Bore Dia., 20-1/2 In. Stroke, 150 Max. Pressure (psi), Mounting Style Bolt Thru, 1/8 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 23.75 Total Length (in.), 149 Max. Load (lb.), Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 3/8 Rod Dia. (in.), 3/8-24 Rod Thread (in.), 5/8 Rod Thread Length (in.), Meets Nfpa Minimize

Generac 5875 Features: -Guardian Air Cooled Pre-packaged G ... Read more

Generac 5875 Features: -Guardian Air Cooled Pre-packaged Generator with 200A SE. -Includes 200-Amp Service Entrance Automatic Transfer Switch. -Aluminum enclosure. -Provides backup power to all circuits in your load center. -Most powerful air-cooled generator available. -Ideal for single-family homes requiring multiple air conditioners. -Runs indefinitely off natural gas or LP fuel source. -Powerful and reliable air-cooled V-twin engine. -Maintains precise control of engine speed and electrical frequency. -Engine runs at reduced speed during exercise cycles. -Exercises at a quiet 60 decibels at 23 feet. -Sound level comparable to an idling car. -External main-circuit breaker, systems status and maintenance interval LED's and GFCI duplex outlet. -Flexible fuel line connector. -Include composite mounting pad. -UL 2200 listed. -This pre-packaged system is a cost effective option for areas not adopting the NEC 2008 code changes. Specifications: -Enclosure: Aluminum. -Rated Power (LPG / NG): 20/18kW. -Amps @ 120/240 Single Phase (LPG): 166.6/83.3. -Amps @ 120/240 Single Phase (NG): 150/75. -Engine: OHVI / 992cc, 36 HP. -Engine / Alternator: 3600/3600. -EPA / CARB Certified: Yes. -db(A) at Normal Operating Load: 66. -Dimensions: 48" L x 25" W x 29" H. -Automatic Transfer Switch (Included): 200 Amp Service Entrance Rated / Nema 3R. -Battery Required (Not Included): 12 Volt, Group 26, 525 Cold-Cranking Amps. -Consumer Warranty: 3 Years. -Commercial Warranty: 3 Years. Qualifies for $50/$50 Generac Referral Program $50/$50 Generac Referral Program Minimize

Air Cylinder, Double Acting, Aluminum Nfpa, 1-1/2 In. Bore ... Read more

Air Cylinder, Double Acting, Aluminum Nfpa, 1-1/2 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/4 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 25.875 Total Length (in.), 441 Max. Load (lb.), Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.), Meets Nfpa Minimize

Double-Row Angular Contact Air Conditioner Bearing 35mm x ... Read more

Double-Row Angular Contact Air Conditioner Bearing 35mm x 52mm x 20mm 35 x 52 x 20 Double-row Angular Contact Ball Bearing, bearing is made from Chrome Steel, each bearing has built-in Rubber Seals to protect the bearing from dust or any possible contamination, this is self lubricated bearing (bearing is already greased). * Item: 35 x 52 x 20 Ball Bearing * Type: Double-Row Angular Contact Ball Bearing * Closures: Rubber Sealed * Quantity: One Bearing * Size: 35mm x 52mm x 20mm Minimize

Air Cylinder, Double Acting, Steel Nfpa, 2 In. Bore Dia., 2 ... Read more

Air Cylinder, Double Acting, Steel Nfpa, 2 In. Bore Dia., 20 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/4 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 25.375 Total Length (in.), 785 Max. Load (lb.), Steel, Steel Body Material, Black Finish, Steel, Chrome Plated Steel, Steel, Steel, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.), Meets Nfpa Minimize

Air Cylinder, Double Acting, Small Bore Nfpa, 1-1/8 In. Bor ... Read more

Air Cylinder, Double Acting, Small Bore Nfpa, 1-1/8 In. Bore Dia., 20 In. Stroke, 150 Max. Pressure (psi), Mounting Style Bolt Thru, 1/8 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 23.25 Total Length (in.), 149 Max. Load (lb.), Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 3/8 Rod Dia. (in.), 3/8-24 Rod Thread (in.), 5/8 Rod Thread Length (in.), Meets Nfpa Minimize

Wooden return air grilles are a quality alternative to stam ... Read more

Wooden return air grilles are a quality alternative to stamped metal grilles. Return air grilles allow easy access for filter replacement, cleaning or duct inspection. Decorative return air grilles are pre-primed with an oil-based primer. These Return Air Grilles are engineered to ensure proper airflow so HVAC systems can work effectively. Replace your ugly, worn-out return air grille with one designed for style as well as excellent performance. If an unsightly return air grille detracts from the beauty of your home, then we have the easy solution. Simply upgrade it with one of these wooden return air grilles that can be left white or easily painted to blend into any wall or ceiling. Each Return Air Grille features a patented locking system that provides secure installation without visible latches or screws. These decorative return air grilles feature wide louvers that hide dust and an air filter, if needed. Available in assorted sizes, the decorative Return Air Grille includes wooden louver frame and 26-gauge metal frame housing that can hold a 1" thick filter (not included). Benefits of the Return Air Grille: Minimize

24,000BTU230V/ENGYSTAR ROOM AIR CONDITIONER

Also known as: AP 5302, AP5302, APT-5302, AST-5302, AST5302 ... Read more

Also known as: AP 5302, AP5302, APT-5302, AST-5302, AST5302; Specifications: Capacity: 20 Ton Minimum Height: 9.5"/241mm Maximum Height: 17.8"/452mm Lift: 5.16"/131mm Screw: 3.15"/80mm Air Pressure: 90-120psi Net Weight: 40lbs./18kg Designed for operating either manually or pneumatically Air hose can swivel in any direction of connection from air source Fitted with a safety valve against overloading 3 piece long handle allows ease of pumping Extension screw gives added height when necessary Minimum air pressure required is 8 bars Speedy and versatile, air/hydraulic bottle jack is far quicker than using conventional hand operated hydraulic equipment and much safer since air power permits one-handed operation and enables user to watch load more closely Heavy duty design makes them ideal for a wide variety of automotive, truck, industrial and construction work Minimize

Air Cylinder, Double Acting, Stainless Steel Nfpa, 2 In. Bo ... Read more

Air Cylinder, Double Acting, Stainless Steel Nfpa, 2 In. Bore Dia., 20 In. Stroke, 250 Max. Pressure (psi), Mounting Style Rear Flange, Cushion Type Adjustable, 3/8 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 25.75 Total Length (in.), 785 Max. Load (lb.), Aluminum, Stainless Steel Body Material, Silver Finish, Stainless Steel, Stainless Steel, Stainless Steel, Stainless Steel, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.), Meets Nfpa Minimize

Air Cylinder, Double Acting, Steel Nfpa, 4 In. Bore Dia., 2 ... Read more

Air Cylinder, Double Acting, Steel Nfpa, 4 In. Bore Dia., 20 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 3/8 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 26.75 Total Length (in.), 3141 Max. Load (lb.), Steel, Steel Body Material, Black Finish, Steel, Chrome Plated Steel, Steel, Steel, 1 Rod Dia. (in.), 3/4-16 Rod Thread (in.), 1-1/8 Rod Thread Length (in.), Meets Nfpa Minimize

Air Cylinder, Double Acting, Steel Nfpa, 2 In. Bore Dia., 2 ... Read more

Air Cylinder, Double Acting, Steel Nfpa, 2 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/4 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 25.875 Total Length (in.), 785 Max. Load (lb.), Steel, Steel Body Material, Black Finish, Steel, Chrome Plated Steel, Steel, Steel, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.), Meets Nfpa Minimize

Wooden return air grilles are a quality alternative to stam ... Read more

Wooden return air grilles are a quality alternative to stamped metal grilles. Return air grilles allow easy access for filter replacement, cleaning or duct inspection. Decorative return air grilles are pre-primed with an oil-based primer. These Return Air Grilles are engineered to ensure proper airflow so HVAC systems can work effectively. Replace your ugly, worn-out return air grille with one designed for style as well as excellent performance. If an unsightly return air grille detracts from the beauty of your home, then we have the easy solution. Simply upgrade it with one of these wooden return air grilles that can be left white or easily painted to blend into any wall or ceiling. Each Return Air Grille features a patented locking system that provides secure installation without visible latches or screws. These decorative return air grilles feature wide louvers that hide dust and an air filter, if needed. Available in assorted sizes, the decorative Return Air Grille includes wooden louver frame and 26-gauge metal frame housing that can hold a 1" thick filter (not included). Benefits of the Return Air Grille: Minimize

Air Cylinder, Double Acting, Aluminum Nfpa, 1-1/2 In. Bore ... Read more

Air Cylinder, Double Acting, Aluminum Nfpa, 1-1/2 In. Bore Dia., 20 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/4 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 25.375 Total Length (in.), 441 Max. Load (lb.), Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 5/8 Rod Dia. (in.), 1/2-20 Rod Thread (in.), 3/4 Rod Thread Length (in.), Meets Nfpa Minimize

Air Cylinder, Double Acting, Stainless Steel Nfpa, 4 In. Bo ... Read more

Air Cylinder, Double Acting, Stainless Steel Nfpa, 4 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Rear Flange, Cushion Type Adjustable, 1/2 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 27.875 Total Length (in.), 3141 Max. Load (lb.), Aluminum, Stainless Steel Body Material, Silver Finish, Stainless Steel, Stainless Steel, Stainless Steel, Stainless Steel, 1 Rod Dia. (in.), 3/4-16 Rod Thread (in.), 1-1/8 Rod Thread Length (in.) Minimize

Air Cylinder, Double Acting, Steel Nfpa, 6 In. Bore Dia., 2 ... Read more

Air Cylinder, Double Acting, Steel Nfpa, 6 In. Bore Dia., 20-1/2 In. Stroke, 250 Max. Pressure (psi), Mounting Style Universal, Cushion Type Adjustable, 1/2 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 28.75 Total Length (in.), 7068 Max. Load (lb.), Steel, Steel Body Material, Black Finish, Steel, Chrome Plated Steel, Steel, Steel, 1-3/8 Rod Dia. (in.), 1-14 Rod Thread (in.), 1-5/8 Rod Thread Length (in.), Meets Nfpa Minimize