> Sport and Outdoor > remington 1187/store amazon

Remington 1100/1187 Enhanced Charging Handle: Hassle free i ... Read more

Remington 1100/1187 Enhanced Charging Handle: Hassle free installation. No modifications are needed to your shotgun. The Enhanced Charging Handle is much larger than the factory Remington 1100/1187 charging handle providing a more positive method of charging, especially in stress fire situations. Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations or when wearing gloves. Provides light weight, consistent reliable functioning. Rounded edges provide a snag free operation. All edges are deburred for the shooters safety. The Remington 1100/1187 Enhanced Charging Handle does not rotate. Manufactured from 4140 ordnance steel. Heat treated to Rockwell 45 C to sustain the punishment of professional use. Manganese phosphate finished matte black per mil-spec. Minimize

A special model with shortened pull (13") includes all the ... Read more

A special model with shortened pull (13") includes all the features of the SPEEDFEED IV Solid Stock. Perfect for small frame shooters and tactical law enforcement requirements. Minimize

The GG& Remington 870 Jumbo Head Safety This is one of th ... Read more

The GG& Remington 870 Jumbo Head Safety This is one of the latest additions to the GG&G line of Tactical Shotgun Accessories. With its enhanced features it beats the standard factory 870 safety hands down. Gear Up With The Good Stuff! Remington 870 Safety Specifications: This safety fits the Remington 870, 1100 and 1187 shotguns. Installs just like the factory 870 safety. No modification to the shotgun required. The shotgun safety has an oversized deactivation button allowing you to deactivate the safety without repositioning your fire control hand. Unique non-slip machined surfaces on both faces of safety aid in your ability to activate and deactivate the safety without your thumb or finger slipping off of the safety. The button on the activation side is longer than the standard 870 safety button. This allows you a quicker and more positive method of engaging the safety. High visibility orange indicator aids in seeing what position the safety is in. The Remington safety is manufactured from ordnance steel for wear resistance and is manganese phosphated matte black per mil-spec. ul Minimize

Ridged, heavy-duty sling mount helps keep the shooter's han ... Read more

Ridged, heavy-duty sling mount helps keep the shooter's hand behind the muzzle on short barreled guns equipped with extended magazines. Includes detent locking ball. Installs under the magazine cap. Accepts up to 1-¼" slings. Mfg: Scattergun Technology SPECS: Steel, black parkerized. 2-½" (6.3cm) high, 1-½" (3.8cm) wide. Minimize

Quickly and easily converts any Remington 12- or 16-gauge m ... Read more

Quickly and easily converts any Remington 12- or 16-gauge model 870, 1100 or 11-87 for sling attachment. Universal magazine cap with swivel stud replaces your existing magazine cap. Rear swivel stud simply screws into place after minor drilling. Sling measures 39" and is constructed of rugged Mil-Spec webbing with brass hardware. 1-1/4" wide sling sports a one-hand length-adjustment buckle and thumb loop for reduced fatigue. Color/Camo patterns: Black, Mossy Oak Break-Up Sports and Outdoors > Sport and Outdoor Minimize

Modular folding, collapsible buttstock and pistol grip syst ... Read more

Modular folding, collapsible buttstock and pistol grip system for Remington 870 shotguns. Rugged adapter design features streamlined hinge. Stock is locked in the open position by a robust claw. A button releases lock and allows stock to fold. Spring tension holds stock in folded position. Pull stock to unfold. System is completely ambidextrous and can be switched to fold left or right. Storage compartments in grip and in buffer tube. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Aircraft-grade aluminum, steel, and MIL-SPEC reinforced polymer composite. Minimize

Excellent varmint / target trigger. 4 oz. to 20oz. Factory ... Read more

Excellent varmint / target trigger. 4 oz. to 20oz. Factory adjusted to break at 5 to 7 oz. Will service Remington models 700, 40X, Model 7, XR-100 and the rear grip XP-100 pistol. Rifle Basix Remington after-market triggers feature state of the art CNC machined housings made from T6 6061 billet aluminium and are black anodized for a factory appearance. All internal levers are investment cast from A-2 tool steel, CNC machined and heat treated for excellent wear characteristics. The levers are now electro nickel plated for extra protection and bright appearance. Each Rifle Basix Remington trigger is hand assembled, mounted on a test action, adjusted within advertised specifications, tested for proper operation and safety function before packaging. These triggers are guaranteed as long as they are in service, and may be repaired or replaced at no charge at any time (providing they have not been modified). Rifle Basix Remington triggers are designed for USER installation. No cutting, grinding, fitting or stock modification for adjustment screw clearance. These triggers feature wide (factory width) finger levers. Rifle Basix triggers are designed to utilize Remington's original safety levers both right and left hand. New mounting pins are shipped with each trigger. Our new "K" kits are packaged with safety levers and bolt stop release to service the 2006 and later Remington rifles with their new trigger design. Right hand only. Minimize

Axiom TH Thumbhole Rifle Stock - Polymer Full Float Short A ... Read more

Axiom TH Thumbhole Rifle Stock - Polymer Full Float Short Action Remington 700BDL Rifle Black. Blackhawk Axiom TH Thumbhole Rifle Stock - Polymer Full Float Short Action Remington 700BDL Rifle Black Minimize

Modular folding, collapsible buttstock and pistol grip syst ... Read more

Modular folding, collapsible buttstock and pistol grip system for Remington 870 shotguns. Features a patented recoil-compensating system for unparalleled recoil reduction! Rugged adapter design features streamlined hinge. Stock is locked in the open position by a robust claw. A button releases lock and allows stock to fold. Spring tension holds stock in folded position. Pull stock to unfold. System is completely ambidextrous and can be switched to fold left or right. Storage compartments in grip and in buffer tube. Combat-proven GLR-16 stock with battery storage and rubber recoil pad, adjustable to six positions. Aircraft-grade aluminum, steel, and MIL-SPEC reinforced polymer composite. Minimize

The GG&G Remington 870 Looped Front Sling Attachment was de ... Read more

The GG&G Remington 870 Looped Front Sling Attachment was developed to be used in combination with the GG&G Remington Looped Rear Sling Attachment in a conventional dual point sling setup. The Remington Front Sling Attachment will also fit the Remington 1100 & 1187 shotguns. Use of HK Style snap hooks or mash hooks on slings for shotguns such as the Remington 870, have become very popular in military, law enforcement special operations circles and for shotguns used in home defense. Because of the lack of an alternative method, most shooters have just clipped their slings with snap hooks into a standard sling swivel. Although this kinda works, it is noisy and provides a loose and sloppy sling attachment. The GG&G Remington 870 Quick Clip Front Sling Attachment is an easy to install rugged alternative to clipping into the standard sling swivel or front sling plate and is ambidextrous. The 870 Front Sling Attachment is machined in our facility from AS-35 Geneva steel. Of exceptionally high quality, this famous Swiss steel features molecular structure with elongated grains for added toughness. The corners have been rounded and dehorned for the operators safety. Many competing products are manufactured from insubstantial stamped sheet metal and have rather sharp edges that not only can cut you, but can cut your equipment, including our sling. As with all of our tactical products, this one has been designed for the rigors associated with professional use. A ball bearing detent on the Sling Attachment helps secure the unit behind the magazine tubes end cap. It is finished in a non-reflective manganese phosphate matte black per mil-spec. Minimize

Fits: Remington 700, Short Action, BDL, Sporter Barrel. Fu ... Read more

Fits: Remington 700, Short Action, BDL, Sporter Barrel. Full length bed block. Hogue's revolutionary O.M. series stocks (Pat. Pending) are made similar to their popular rubber grips. Constructed by molding a super strong, rigid fiberglass reinforced stock that precisely fits the rifle action. This small "stock" or "skeleton", is then completely OverMolded with the same rubber compound used on Hogue grips. The skeleton or insert, as it is called, chemically as well as mechanically adheres to the rubber resulting in a permanent bond between the rubber and the insert. The super strong insert not only gives the stocks their strength but the precise molded dimensions provide a perfect drop in fit of your rifle action. OverMolding with rubber is superior in every way and provides the ultimate in a comfortable, non slip, super smooth attractive finish, that is durable and extremely quiet. All the following custom features come at prices comparable or below any other standard synthetic stock on the market. Hogue stocks incorporate every desirable feature a fine rifle stock should have and by adding unique Hogue touches they have created a much superior and unique stock compared with anything on the market today. Features include; a sleek straight comb, palm swells and a "varminter" style forend which are treated with a unique "Cobblestone" texture. Hunters especially will be attracted to the incredible quietness of these stocks coupled with lightweight, superior non-slip comfort, and accuracy. Centerfire rifle stocks all come equipped with the finest in recoil pads. Hogue recoil pads are formulated and molded from a "super cushion" blend of recoil reducing materials that rivals and even surpasses any other pad available. Special material coupled with computer designed, internal cushion structure provides outstanding recoil control and shooting comfort. Minimize

Rifle Basix Remington after-market triggers feature state o ... Read more

Rifle Basix Remington after-market triggers feature state of the art CNC machined housings made from T6 6061 billet aluminium and are black anodized for a factory appearance. All internal levers are investment cast from A-2 tool steel, CNC machined and heat treated for excellent wear characteristics. The levers are now electro nickel plated for extra protection and bright appearance. Each Rifle Basix Remington trigger is hand assembled, mounted on a test action, adjusted within advertised specifications, tested for proper operation and safety function before packaging. These triggers are guaranteed as long as they are in service, and may be repaired or replaced at no charge at any time (providing they have not been modified). Rifle Basix Remington triggers are designed for USER installation. No cutting, grinding, fitting or stock modification for adjustment screw clearance. These triggers feature wide (factory width) finger levers. Rifle Basix triggers are designed to utilize Remington's original safety levers both right and left hand. New mounting pins are shipped with each trigger. Our new "K" kits are packaged with safety levers and bolt stop release to service the 2006 and later Remington rifles with their new trigger design. Right hand only. Minimize

Black Aces Tactical Remington 870 / 1100 Tactical Rail This ... Read more

Black Aces Tactical Remington 870 / 1100 Tactical Rail This one-piece aluminum rail chassis will turn your shotgun into an advanced weapons platform. The full length Picatinny rail provides plenty of room for mounting accessories, optics, bipods, lights, lasers, vertical grips, and even less-lethal launchers. The low-profile top rail has plenty of room for back-up iron sights co-witnessed with your primary optic. Machined from 6061-T6 High strength aircraft aluminum, with weight-reducing cuts that enhance barrel cooling, without sacrificing strength and rigidity. The Black Aces Tactical quad rail system features: One piece T6 6061 construction Light 16 ounce weight!! Type 2 black anodizing Full install kit with tools is included. No gunsmithing required! This rail will fit both tapped and untapped receivers. Install time take under 10 minutes from the time the rail is removed from the box to the time the shotgun is ready to fire. Tools are supplied as well as detailed instructions! The rail will work with most popular shell holders. Extension tubes with sling loops may hinder the rail. Minimize

These all-new Remington sporting clays tubes are made from ... Read more

These all-new Remington sporting clays tubes are made from 1704 stainless steel and are precision machined to produce a choke tube that patterns better than standard choke tubes. These choke tubes feature a 25% larger parallel section in the choke, thus throwing more consistent patterns than conventional choke tubes. Each choke tube is knurled on the end to allow for quick and easy removal. Plus, they have the constriction laser etched on the end for easy reference. Lifetime warranty. For 12-gauge models only. Sports and Outdoors > Sport and Outdoor Minimize

Fits: Remington 700, Long Action, BDL, Standard Hogue's rev ... Read more

Fits: Remington 700, Long Action, BDL, Standard Hogue's revolutionary O.M. series stocks (Pat. Pending) are made similar to their popular rubber grips. Constructed by molding a super strong, rigid fiberglass reinforced stock that precisely fits the rifle action. This small "stock" or "skeleton", is then completely OverMolded with the same rubber compound used on Hogue grips. The skeleton or insert, as it is called, chemically as well as mechanically adheres to the rubber resulting in a permanent bond between the rubber and the insert. The super strong insert not only gives the stocks their strength but the precise molded dimensions provide a perfect drop in fit of your rifle action. OverMolding with rubber is superior in every way and provides the ultimate in a comfortable, non slip, super smooth attractive finish, that is durable and extremely quiet. The features include a sleek straight comb, palm swells and a 'varminter' style forend which are treated with a unique 'Cobblestone' texture. Hunters especially will be attracted to the incredible quietness of these stocks coupled with lightweight, superior non-slip comfort, and accuracy. Centerfire rifle stocks all come equipped with the finest in recoil pads. Hogue recoil pads are formulated and molded from a 'super cushion' blend of recoil reducing materials that rivals and even surpasses any other pad available. Special material coupled with computer designed, internal cushion structure provides outstanding recoil control and shooting comfort. Pillar Bed Stock Fits: Remington 700 BDL Long Action Standard Barrel Minimize

Fits: Remington 700, Long Action, BDL, Sporter/Magnum barre ... Read more

Fits: Remington 700, Long Action, BDL, Sporter/Magnum barrel. Full length bed block. Hogue's revolutionary O.M. series stocks (Pat. Pending) are made similar to their popular rubber grips. Constructed by molding a super strong, rigid fiberglass reinforced stock that precisely fits the rifle action. This small "stock" or "skeleton", is then completely OverMolded with the same rubber compound used on Hogue grips. The skeleton or insert, as it is called, chemically as well as mechanically adheres to the rubber resulting in a permanent bond between the rubber and the insert. The super strong insert not only gives the stocks their strength but the precise molded dimensions provide a perfect drop in fit of your rifle action. OverMolding with rubber is superior in every way and provides the ultimate in a comfortable, non slip, super smooth attractive finish, that is durable and extremely quiet. Features include; a sleek straight comb, palm swells and a "varminter" style forend which are treated with a unique "Cobblestone" texture. Hunters especially will be attracted to the incredible quietness of these stocks coupled with lightweight, superior non-slip comfort, and accuracy. Centerfire rifle stocks all come equipped with the finest in recoil pads. Hogue recoil pads are formulated and molded from a "super cushion" blend of recoil reducing materials that rivals and even surpasses any other pad available. Special material coupled with computer designed, internal cushion structure provides outstanding recoil control and shooting comfort. Minimize

Designed for Law Enforcement - Ideal for Sportsmen the SPEE ... Read more

Designed for Law Enforcement - Ideal for Sportsmen the SPEEDFEED I stock has two magazine tubes(storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. Minimize

Button Pins are built from high carbon steel to withstand t ... Read more

Button Pins are built from high carbon steel to withstand the toughest use without cracking and breaking. Versatile, ambidextrous pins can be mounted on either side to allow left- or right-hand carry. Required for use with polymer loop. Mfg: Button Sling, Inc. SPECS: Button Pin - Steel, blue, matte finish. Minimize

The Remington 870 / 1100 / 1187 Follower: Remington 870 ... Read more

The Remington 870 / 1100 / 1187 Follower: Remington 870 Shotgun shooters know that the standard Remington 870 follower leaves much to be desired. It is unreliable and does not offer the necessary features tactical shooters are looking for. It is one of the first 870 shotgun components to be upgraded. The GG&G Remington 870 Follower for 12 ga. shotguns is an enhanced follower manufactured with the tactical shooter in mind. GG&G Remington 870 Magazine Follower Specifications: The enhanced 870 follower fits the Remington 870, 1100 and 1187 12 ga. shotguns. Installs just like the factory 870 follower. No modification to the shotgun required. The GG&G Remington Follower is manufactured from stainless steel for corrosion and wear resistance. The stainless steel body provides smooth operation and resists galling and contaminants imbedding into the body of the follower. These are the two major contributors to aftermarket followers malfunctioning. The high visibility red insert is aluminum and is manufactured so that you cannot only quickly see that the magazine tube is empty, but in low light conditions, feel the difference between the face of the follower and the rear of a shotgun shell. The follower is manufactured with a deep spring pocket to better control spring movement. Minimize

One of the most important firearms designs in history is th ... Read more

One of the most important firearms designs in history is the Remington Beals, but until now, little has been published on these exceptional little pistols that started the Remington revolver dynasty. Charles Schif, the acknowledged worldwide authority on the Remington Beals, presents his long-awaited guide that will answer all the questions collectors have been asking for decades. Hailed by arms expert Herb Glass, Jr., as "an extremely important project," this fine, new book was produced with no expense spared and is certainly one of the most attractive gun books ever produced. All Remington collectors will want a copy of this limited edition study while they are still available. 8.5x11, dustjacket, color content throughout, professional color photographs by Paul Goodwin, coated paper, deluxe. Minimize

This bold series of cutlery provides civilians with one of ... Read more

This bold series of cutlery provides civilians with one of the finest selections of tactical knives available. The Remington Design Team searched the world over to find a product worthy of bearing the Remington name, with the search ending in the township of Maniago, Italy. This area of Italy is world-known for its expertise and precision craftsmanship of fine cutlery, and the Remington expert designed Premier Tactical line of knives, signifies the finest hand-made examples of Italian craftsmanship. Representing the pinnacle of the Remington Premier Tactical Series of knives, the Tango Series is comprised of a Series I model fixed-blade and a matching companion Series II model folder. These Series I rugged knives are designed to handle any tactical situation. Constructed of grade-specific stainless steel and equipped with nearly indestructible G-10 handles, whether you find yourself carving up dinner, slicing through rope or busting through metal, these tactical knives are designed to handle any possible situation. For collector and replacement requirements, each series is clearly marked with corresponding production codes for authenticity. Blade Options: Civilian Drop Point, Civilian Tanto Minimize

Remington Shotgun Plug 12 Gauge Features: Fits most of fire ... Read more

Remington Shotgun Plug 12 Gauge Features: Fits most of firearms including Remington Model 870 TM /1100 TM /1187 TM Compatible with 12 gauge shotguns with most 2 3/4" and 3" guns only Will not fit special field or 31/2" Chamber shotgun Plastic will not scratch inside of magazine. Specifics: Weight: 0.5 ounces Model: 19451 Material: Plastic Color: Green Minimize

For the riders who prefer the traditional front zip vest, t ... Read more

For the riders who prefer the traditional front zip vest, the Remington incorporates many of the same features of the popular Faction vest. Key Features of the CWB Remington Non CGA Wakeboard Vest: Thin profile, Non-CGA neoprene vest Hidden strap with side release buckle Extra padding in the lower back Segmented foam for freedom of movement Center zip Oversized arm holes Mesh drain holes Minimize