> Sport and Outdoor > BMW > Amazon Marketplace

Suitable for bicycles with quick-release skewers on the fro ... Read more

Suitable for bicycles with quick-release skewers on the front wheel. Quick-release fastening on the front wheel fork and a belt fastener on the rear wheel keep your cycle in place.A holder that secures the front wheel to the roof rack base is al Minimize

BMW Junior Bike Tricycle with easy steering, large noise-ca ... Read more

BMW Junior Bike Tricycle with easy steering, large noise-cancelling rubber wheels and optimized ergonomics for an ideal seating position. Modular design makes it easy to take apart and transport. Suitable for ages 3-5. Minimize

Weather protection to go. Interrupt your journey just becau ... Read more

Weather protection to go. Interrupt your journey just because it's raining? Not with the ProRain 3! This wind and waterproof overall can be folded away into an incredibly small package, yet thanks to the durable high-quality stretch nylon fabric with waterproof coating, it can be worn over any motorcycling suit that doesn't feature a climate membrane. The striking colours and reflective panels make a big contribution to active safety, especially when visibility is poor. And an ingenious system of zip fasteners makes putting it on as easy as opening an umbrella. There's no quicker way to make sure you stay nice and dry. - One-piece wet-weather oversuit - 100% nylon stretch laminate - Long diagonal front zip and long side zips on legs for easy on/off - Waterproof external pocket - Packs up very small - Heat-resistant Nomex® material around inner leg areas - Anti-slip material in seat area - Large reflective areas Minimize

Mixture of Leather and AirTexTM: Highly abrasion-resistant ... Read more

Mixture of Leather and AirTexTM: Highly abrasion-resistant DynaFil® with a light, air-permeable mesh structure with completely free air through-flow. -Inside hand in part with doubled leather sections. -Upper hand with Cordura® stretch sections. -Perforated between fingers. -Velcro width adjuster. -Useful finger wipe function. -Component of AirFlow concept. -2 Year Warranty Minimize

Mixture of Leather and AirTexTM: Highly abrasion-resistant ... Read more

Mixture of Leather and AirTexTM: Highly abrasion-resistant DynaFil® with a light, air-permeable mesh structure with completely free air through-flow. -Inside hand in part with doubled leather sections. -Upper hand with Cordura® stretch sections. -Perforated between fingers. -Velcro width adjuster. -Useful finger wipe function. -Component of AirFlow concept. -2 Year Warranty Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize

Weather protection to go. Interrupt your journey just becau ... Read more

Weather protection to go. Interrupt your journey just because it's raining? Not with the ProRain 3! This wind and waterproof overall can be folded away into an incredibly small package, yet thanks to the durable high-quality stretch nylon fabric with waterproof coating, it can be worn over any motorcycling suit that doesn't feature a climate membrane. The striking colours and reflective panels make a big contribution to active safety, especially when visibility is poor. And an ingenious system of zip fasteners makes putting it on as easy as opening an umbrella. There's no quicker way to make sure you stay nice and dry. - One-piece wet-weather oversuit - 100% nylon stretch laminate - Long diagonal front zip and long side zips on legs for easy on/off - Waterproof external pocket - Packs up very small - Heat-resistant Nomex® material around inner leg areas - Anti-slip material in seat area - Large reflective areas Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

A winter glove with excellent thermal insulation, Palm made ... Read more

A winter glove with excellent thermal insulation, Palm made from hydrophobic goat leather, doubled in some areas, Silicon coating on the palm , Highly breathable, wind and waterproof GORE-TEX® membrane ?Soft, insulating microfiber lining plus an aluminum layer ?Finger curved forwards for optimum fit, Protective foam on knuckles and fingertips, Long cuff with one-handed adjustment mechanism,Large reflective strips ,Visor wiper on the thumb Minimize

A winter glove with excellent thermal insulation, Palm made ... Read more

A winter glove with excellent thermal insulation, Palm made from hydrophobic goat leather, doubled in some areas, Silicon coating on the palm , Highly breathable, wind and waterproof GORE-TEX® membrane ?Soft, insulating microfiber lining plus an aluminum layer ?Finger curved forwards for optimum fit, Protective foam on knuckles and fingertips, Long cuff with one-handed adjustment mechanism,Large reflective strips ,Visor wiper on the thumb Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

-A lightweight sport glove. -Tough 0.27 - 0.31 in. cowhide ... Read more

-A lightweight sport glove. -Tough 0.27 - 0.31 in. cowhide leather. -Toughened shell with leather overlay and protective foam underlay. -Protective foam and doubled leather on the palm. -Unlined palm for outstanding grip. -Long cuff with protector, padding and reflective strip. -Perforations between fingers for ventilation. -Sizes: 6/6 1/2 - 12/12 1/2. -Color: black with grey palm Unsure on glove size? 1. measure the fullest part of your palm 2. round up to the next highest inch 3. hand measures 8 inches, then size 8 Minimize

A visually appealing luggage compartment solution that comb ... Read more

A visually appealing luggage compartment solution that combines a non-slip, acid-resistant fitted mat with a loading sill protector. The waterproof collapsible box has a strap inside to hold items like bottles firmly in place. The collapsible box cleverly slots into the fitted mat to prevent it from sliding around. Box measures approximately 14 x 14 x 5. Minimize

Mixture of Leather and AirTexTM: Highly abrasion-resistant ... Read more

Mixture of Leather and AirTexTM: Highly abrasion-resistant DynaFil® with a light, air-permeable mesh structure with completely free air through-flow. -Inside hand in part with doubled leather sections. -Upper hand with Cordura® stretch sections. -Perforated between fingers. -Velcro width adjuster. -Useful finger wipe function. -Component of AirFlow concept. -2 Year Warranty Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize

A winter glove with excellent thermal insulation, Palm made ... Read more

A winter glove with excellent thermal insulation, Palm made from hydrophobic goat leather, doubled in some areas, Silicon coating on the palm , Highly breathable, wind and waterproof GORE-TEX® membrane ?Soft, insulating microfiber lining plus an aluminum layer ?Finger curved forwards for optimum fit, Protective foam on knuckles and fingertips, Long cuff with one-handed adjustment mechanism,Large reflective strips ,Visor wiper on the thumb Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize

The Rallye 3 Jacket has removable sleeves for use as body w ... Read more

The Rallye 3 Jacket has removable sleeves for use as body warmer or vest and is designed with many different possibilities for ventilation and ways of adjusting widths and fit. The various pockets are capacious for long tours and off-road competitions and there's now an outside pouch for drinking-water reservoir ? easy to fill. It also sports plenty of reflective material for high visibility in traffic. New membrane with Comfort-Mapping (on both Rallye 3 Jacket and Rallye 3 Pants): The most suitable membrane is assigned to each part of the body to provide the most comfort and functionality. The extent of the waterproofing capability and its breathable capability have different weightings in various zones. With a roughened inner surface at exposed parts of the body to provide more protection against the cold. There are 3 zones: Zone 1 "Flow": highly breathable (e.g. back, top of seat). Zone 2 "Comfort": with warming, light fleece (e.g. knees, bottom of seat, shoulders and nape of the neck). Zone 3 "Shield": maximum waterproofing capability to deal with water when the motorcycle is on the move in driving rain Minimize