> Sport and Outdoor > CONSTRUCTION FORM

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

A true three-season mummy, this ultracompact bag offers lig ... Read more

A true three-season mummy, this ultracompact bag offers lightweight warmth, a fully adjustable contoured hood and double-layer quilt construction. Rteq insulation provides the ultimate in thermal performance. Rteq is up to 40% lighter than other fills and 20% more efficient at the fiber level, delivering outstanding compactness and durability. This mummy bag features a differential cut with the inner layer of the bag cut smaller than the outer layer, creating consistent insulation thickness throughout the bag. This also prevents thermal leaks from forming, keeping warm air inside and cold air outside. Offset quilt construction is like having a bag within a bag. The tough, 230T Star Gaze polyester ripstop shell is quilted to the insulation. When the two layers are assembled, the outer stitching is offset from the inner stitching. Cold air from the outside cant get through to the inner layer, and warm air on the inside cant escape. Fully adjustable contoured hood snugs around your head with a simple pull of a drawcord. Ergonomic trapezoidal footbox is designed specifically for the natural forward and outward tilting of your feet. Space-saving compression sack keeps bag protected. No. 5 self-repairing zippers. Imported.Size: 31W x 78L.Temperature rating: +15F.Fill weight: 1 lbs. 13 oz.Carry weight: 2 lbs. 15 oz. Sports and Outdoors > Sport and Outdoor Minimize

Stable and fast, the Current Designs Vision 150 Roto kayak ... Read more

Stable and fast, the Current Designs Vision 150 Roto kayak with rudder offers the best characteristics of a recreational kayak in a sea-worthy design. 15 ft. length offers plenty of speed, tracking and stability during long day or overnight paddles. Swede-form construction enhances speed and maneuverability, and it allows bow to punch through waves instead of riding up and over them. Shallow-V hull enhances tracking and offers friendly stability and a lively feel in the water, and low decks minimize wind resistance. Rotomolded polyethylene construction offers performance, responsiveness and rugged durability. Keyhole-shaped cockpit is easy to enter and exit, and integrated foam thighbraces on interior coaming increase comfort when bracing or carving turns. Seat creates a natural, comfortable paddling position by tilting the entire seat pan up and away from cockpit floor. Use the lever-lock knob (it's similar to a quick-release fork on a bike wheel) to set the seat pan to the desired height. Locking mechanism prevents both side-to-side and up-and-down motion. To prevent numbness, seat pan features a contoured space for lower vertebrae and is covered with plush, nonabsorbent, very thick padding. Seatback moves up and down and back and forth, and it articulates to move with your paddling motion. Sliding bar adjusts foot pegs without having to get out and reach inside cockpit. Cockpit-deployable rudder enhances tracking in rough weather; use the foot pegs to direct the rudder and steer the kayak. Rear hatch provides enough storage for an overnight trip and features an easy-to-use, rubberized hatch cover. Bow hatch features rubberized cover and an additional, hard cover with straps to protect contents from splashes. Bulkheaded bow and stern hatches provide generous dry cargo storage during extended voyages and enhance flotation when hatches are sealed. Minimize

All the distinct Vapor attributes high-end players demand p ... Read more

All the distinct Vapor attributes high-end players demand packaged together with an inline chassis Fully heat moldable ALIVE carbon composite boot construction allows the boot to form to your exact foot X-Rib construction provides 3-Dimensional structural support and stability throughout the entire boot, and allows for faster acceleration, quicker turns, and a more confident hockey stance Fully heat moldable internals with high-density ankle padding Comfort wrap at boot opening alleviates abrasion high on the ankle during the break-in process and provides added comfort throughout the life of the skate Hydra-Max 2 liner keeps the feet dry and cool while locking the heel in tight Form-Fit 2 tongue with lace-bite channel and high density metatarsal guard is more protective and comfortable Custom Form-Fit 2 footbed with ergonomic toe protection adds wings around the toe of the footbed to give your toes slight padding within the hard plastic toe cap Aluminum/Glass composite outsole provides a direct link from the floor to your foot Magnesium HI-LO Vanguard chassis features two larger wheels in the back for speed, and two smaller wheels in the front for tight performance Labeda Addiction XXX Grip indoor wheels offer some of the best grip, speed, and durability available to date in an inline wheel Swiss LE 608 bearings Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

The Giro Nine.10 has one bottom line keep your head warm an ... Read more

The Giro Nine.10 has one bottom line keep your head warm and protected without emptying your wallet. The Nine.10 is taking over for the popular Nine.9 and offers all the same great features and a few technical upgrades. Giro's In-Form Fit System lets you dial down the circumference until it fits you just perfectly and an In-Mold construction streamlines the materials to keep it light and comfy. There are 15 vents along with goggle-clearing Stack Vents and if you add a Skullcandy TuneUps pack you can turn it into a helmet with an audio system. All in all the Nine.10 is one heck of a helmet. 15 Super Cool vents release excess heatStack Vents positioned above your goggles to keep them fog-freeVelcro Weatherstrip Vent Shields open and close depending on your preference In Form microadjustable circumference controlled with easy ergo dialStreamlined In-Mold constructionMade in size S 52-55.5cm M 55.5-59cm L 59-62.5cm and XL 62.5-65cm Compatible with TuneUps Audio add-on sold separately Minimize

Fox Racing Motorcycle Helmets, Men's Dirt Bike Motocross He ... Read more

Fox Racing Motorcycle Helmets, Men's Dirt Bike Motocross Helmets. Fox Racing V4 Future Helmet The most technically advanced materials are used in the construction of the Fox Racing V4 Future Carbon Helmet. The carbon-fiber shell and dual-layer EPS liner form a cutting edge, three-stage, impact-absorbing system engineered to provide total coverage. Meticulous thought and attention to detail went into the fit and finish of the V4, making it the helmet by which all others are judged. Features: Cheek pad design wraps around the riders jaw line to create a secure fit Comfort liner provides a balanced, custom feel Shell Sizing: 4 Shell & EPS Sizes for a precise fit (XS-S, M, L, XL-XXL) Dual Density EPS Liner: Anatomically correct, impact absorbing foam reacts positively to impact & widens the energy dispersal area (Firmer outside / Softer inner) Carbon fiber composite shell construction. Astonishing high tensile strength of carbon-fiber is a distinct advantage Exceeds Snell 2010 & DOT Standards DRY LEX? comfort liner wicks moisture & provides a comfortable feel Cheek pads feature a cupped lower edge design to mold to the riders face 16 Intake & 8 Exhaust Ports are designed to circulate serious airflow throughout the helmet 4 large brow/goggle intake ports pull air in & over the face Designed & developed exclusively to exceed the needs of the world's most demanding Motocross and Supercross racers Removable single mouthguard Integrated roostguard Aluminum visor screws Screened off Intake & Exhaust ports let cool air in & keep the mud out Warranty: 5 Years for manufacturing defects Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Smith's award winning Variant Brim Ski/ Snowboard Helmet sh ... Read more

Smith's award winning Variant Brim Ski/ Snowboard Helmet showcases helmet technology in its finest form. Built with Smith's Hybrid Shell construction, this full performance helmet has received the highest compliment- competitor imitation. Hybrid Shell Construction: Combines separate lightweight and durable shells to create an entirely new helmet category. The result is a modern design that provides a lightweight, low-profile, perfect fitting helmet. The Super-Light engineered parts reduce weight and increases comfort while maintaining helmet integrity and durability. Hybrid Shell construction also creates a clean smooth top surface by enabling the low profile Regulator to function with reduced mass and volume. Air-Evac 2: The ultimate in goggle-helmet integration, AirEvac 2 connects shell vents and internal EPS channels to increase airflow and evacuate warm, moist air to prevent goggle fogging. Cool, dry air is consistently pulled into the goggle as the warm, moist air is exhausted over the wearer?s head and out the rear of the helmet.Adjustable Boa Fit System: Smith partnered with Boa Technology, the world?s leader in closure systems, to create all new Boa Fit System. This proprietary fit system takes the proven fit of Smith?s ergonomic head form the next level, offering an intuitive, dial system for the on-the-fly, single-handed micro-adjustment. The Boa system not only offers a self-centering feature, but also adds an additional feature of vertical adjustment. This increases the ease of fit and adjustability. Low-Profile Regulator Adjustable Climate Control: Adjustable, easy to use and extremely effective climate control. The low profile Regulator ventilation system allows you to modify the amount of airflow and heat exhaust, even with a gloved hand.22 VentsX-Static Performance Lining: A silver coated textile fiber that enhances products with permanent and natural anti-odor, anti-static, and thermo-dynamic properties. Anti-Odor: X-Static provides the most powerful antimicrobial and odor elimination system available by using pure silver to inhibit the growth of odor-causing bacteria and fungi. X-Static is the only product that binds with and neutralizes odor-causing ammonia and denatured proteins. It is clinically proven to eliminate 99.9% of harmful micro-organisms within hours of exposure. Regulates Temperature: X-Static possesses maximizes heat transfer, ensuring that you will stay warmer in the winter and cooler in the summer. Natural and permanent: X-static is made with pure silver, no chemicals- so it?s safe for people and the environment. This natural silver is irreversibly bonded to the fabric, it will not wash out or wear out- it will last as long as your helmet does.Snapfit Ear Pads: Ear pads are ergonomically designed to be form fitting and comfortable. Easily removed for washing and effortlessly reinstalled. New Super Light ear pads are designed to reduce weight while maintaining comfort and warmth. Removable Goggle Lock: Securely retains the goggle strap on the helmet to ensure stability, comfort, and performanceSkullcandy Audio Systems availableSmall: 51-55cm, Medium: 55-59cm, Large: 59-63cm, XLarge: 63-67cmCertification: ASTM F2040/ CE EN1077:2007 Class BWeight: 18.5oz, 530g Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Velocity Slot Technology + New Multi-Material Construction ... Read more

Velocity Slot Technology + New Multi-Material Construction = Hottest Fairway Woods and Hybrids Ever The Speedline Super XTD Fairway features a titanium body fused with an ultra-thin formed titanium crown, and tungsten weights in the sole to lower the club?s center of gravity. The extremely low CG combined with the addition of Velocity Slot Technology and the titanium face creates a fairway wood that is as hot as a driver. The high CT makes the XTD Fairway Wood 36% hotter than a traditional fairway wood resulting in exceptional distance. In addition to the increased ball speed, the Super XTD Fairway produces a higher launch while keeping the spin rate low. Features: Formed titanium crown and titanium body for increased ball speed and overall performance Highest CT: 36% higher CT vs a standard fairway, and 14% higher than Fast 12 Precision milled tungsten heel/toe weighting for the lowest center of gravity Titanium Velocity Slots increase ball speed and launch angle while producing less spin Tour inspire Minimize

Easy-to-use handgrip sensors monitor heart rate-use with he ... Read more

Easy-to-use handgrip sensors monitor heart rate-use with heart rate telemetry to help keep the user in an aerobic workout, which optimizes fat burn. Handrails - Ergonomic form enhances user confidence. SmartRate - Shows actual heart rate in relation to the user's target zone for weight loss and cardio training. Advanced 3.2 hp Motor - Cool and quiet, with power and torque at speeds from .5-12 mph. The constant-speed, independent fan improves motor performance at lower speeds, increasing motor life and reliability. Workout Variety - Features a variety of pre-programmed courses, keeping your exercise routines fresh and motivating. Low Maintenance - Quality components and superior construction promote years of trouble-free use. Low Profile - Low step-up height allows comfortable access when mounting and dismounting. Why Buy Remanufactured Gym Equipment? Remanufactured equipment provides an affordable and increasingly popular way to develop new commercial and home fitness centers. It also provides an excellent way to support existing centers as well. The Remanufacturing Process After an order is placed, it enters our 2-6 week remanufacturing process.During this process, our certified technicians strip and rebuild the machine, replacing any parts which do not meet our production standards.Machines are then restored cosmetically, receiving new overlays, paint, and stickers as needed.Following the remanufacturing process, machines are individually tested before they are released for shipping. The treadmill is taken apart and receives a new running belt, hardware, and motor brushes. It also receives resurfaced rollers, the bearings are lubricated and regreased, and the deck is resurfaced and rewaxed as needed. The frame is profesionally painted with stock or custom colors. MPN - prec956i Minimize

Two Shell Construction sized from XS - XXL Ultra- Light we ... Read more

Two Shell Construction sized from XS - XXL Ultra- Light weight at 1250 grams DVRC (Dynamically Variable Resistance Crumple zones) providing incredible ventilation and energy management all in a Uni-body EPS design. SEC (Structurally Enhanced Composite) fiber weave ACE (Advanced Channeled EPS) for maximum ventilation Sound Absorbing Polymers High Optics Anti-Scratch, Anti-Fog shield Hot Cured Bag Molded construction Removable and Washable 3D Comfort Liner and Cheek Pads Special Anti-Nap fabric will not frey from repeated contact with Velcro Hypo-Allergenic Anti-Bacterial Tooless, Thermal formed visor with no side cover for quick and easy removal Reversible upper "Antennae" intake / exhaust ports Duel "Aero Spike" exhaust ports on back of shell Over sized sponge cervical neck roll Breath Deflector D-Ring Closure Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch tes Minimize

ScubaPro Womens Form Plus 3mm Wetsuit SCUBAPRO s Form Plus ... Read more

ScubaPro Womens Form Plus 3mm Wetsuit SCUBAPRO s Form Plus wetsuit is available in 3 mm, 5 mm, and 7 mm thickness in men s and women s sizes. Men s model is black/gray and women s model is black/blue. Back-zip styling for good water sealing and a great ergonomic look and fit New extremely strechable neoprene and nylon jersey construction Smooth-cut neckline to provide unprecedented comfort compared with traditional roll-edged collars Double-blind-stitched outer and inner seams for durability and comfort Metal main zipper slider is sturdy yet easy to operate Integrated heavy-duty kneepads offer enhanced abrasion resistance Extremely-stretchable neoprene and Nylon Jersey construction Smooth-Cut neck line. Metal main zipper slider is sturdy yet easy to operate. Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Even if you never step foot into the octagon, you can still ... Read more

Even if you never step foot into the octagon, you can still look as tough as your favorite fighter with this Form Athletics Mark Munoz Walkout T-Shirt. Made from an ultra comfortable cotton construction, this FORM Athletics t-shirt features vibrant screen print graphics and a rib knit collar. Take it to the next level with this one-of-a-kind shirt from FORM Athletics. Form Athletic Walkout T-Shirt Rib knit collar Screen print graphics Machine washable 100% Ring Spun Cotton Officially licensed This Product Makes a Great Holiday Gift! Minimize

Adams Speedline Super XTD Fairway Wood Performance of a ... Read more

Adams Speedline Super XTD Fairway Wood Performance of a driver, now in a fairway wood The Adams Speedline Super XTD Fairway combines a multi-material construction with Admas Velocity Slot Technology for amazing ball speeds and distance gains never before seen in a fairway wood. The Adams Speedline Super XTD Fairway Wood features a titanium body fused with an ultra-thin formed titanium crown, and tungsten weights in the sole to lower the center of gravity. The low Center of Gravity combined with the addition of Velocity Slot Technology and the titanium face creates a fairway wood that is as hot as a driver. The high CT makes the XTD Fairway Wood 36% hotter than a traditional fairway wood resulting in exceptional distance. Along with the increased ball speed, the Adams Speedline Super XTD Fairway produces a higher launch while keeping the spin rate low. These innovations make the Super XTD Fairway Wood extremely long. Features: Adams Speedline Super XTD Fairway Wood Formed titanium crown and titanium body for increased ball speed and overall performance. Highest CT: 36% higher CT vs a standard fairway, and 14% higher than Fast 12. Precision milled tungsten heel/toe weighting for the lowest CG. Titanium Velocity Slots increase ball speed and launch angle while producing less spin. Tour inspired sole geometry to improve turf interaction. Advanced multi-material design Max C.O.R. The Speedline Super XTD Fairway is a high performance fairway wood engineered using a new multi-material construction method of fusing a titanium body to an ultra-thin titanium crown. With the combination of the crown and chassis, the precision milled tungsten weights located in the sole and the Velocity Slot Technology ? golfers now have a premium fairway wood that is as hot as a driver. With the advancements in multi-material design, the Super XTD features the hottest face in fairway woods ? 36% hotter than a traditional fairway wood ? resulting in increased ball speeds and exceptional distance. The Speedline Super XTD Fairway Wood features a titanium body fused with an ultra-thin formed titanium crown, and tungsten weights in the sole to lower the club's center of gravity. The extremely low CG combined with the addition of Velocity Slot Technology and the titanium face creates a fairway wood that is as hot as a driver. The high CT makes the XTD Fairway Wood 36% hotter than a traditional fairway wood resulting in exceptional distance. In addition to the increased ball speed, the Super XTD Fairway produces a higher launch while keeping the spin rate low. Specifications: Adams Speedline Super XTD Fairway Wood Model Loft Lie Length Swing Weight Hand Flex 3+ 13? 56.5? 43.5” D2 R R, S, X 3 14.5? 56.5? 43” D2 R L R, S, X 5 18? 57? 42.5” D2 R R, S, X Shaft: ?Fubuki AX 65 \ Grip: ?Adams Tour Elite Plus Minimize

Easy-to-use handgrip sensors monitor heart rate-use with he ... Read more

Easy-to-use handgrip sensors monitor heart rate-use with heart rate telemetry to help keep the user in an aerobic workout, which optimizes fat burn. Handrails - Ergonomic form enhances user confidence. SmartRate - Shows actual heart rate in relation to the user's target zone for weight loss and cardio training. Advanced 3.2 hp Motor - Cool and quiet, with power and torque at speeds from .5-12 mph. The constant-speed, independent fan improves motor performance at lower speeds, increasing motor life and reliability. Workout Variety - Features a variety of pre-programmed courses, keeping your exercise routines fresh and motivating. Low Maintenance - Quality components and superior construction promote years of trouble-free use. Low Profile - Low step-up height allows comfortable access when mounting and dismounting. Why Buy Remanufactured Gym Equipment? Remanufactured equipment provides an affordable and increasingly popular way to develop new commercial and home fitness centers. It also provides an excellent way to support existing centers as well. The Remanufacturing Process After an order is placed, it enters our 2-6 week remanufacturing process.During this process, our certified technicians strip and rebuild the machine, replacing any parts which do not meet our production standards.Machines are then restored cosmetically, receiving new overlays, paint, and stickers as needed.Following the remanufacturing process, machines are individually tested before they are released for shipping. The treadmill is taken apart and receives a new running belt, hardware, and motor brushes. It also receives resurfaced rollers, the bearings are lubricated and regreased, and the deck is resurfaced and rewaxed as needed. The frame is profesionally painted with stock or custom colors. MPN - prec956i Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize

Revolutionary one-piece shell construction with multi-impac ... Read more

Revolutionary one-piece shell construction with multi-impact EPP foam bonded to a lightweight, durable polycarbonate shell.Maximizes the amount of protective EPP foam in the helmet for better impact energy management.In-Form Fit System for the truest-fitting and easiest to operate micro-adjustment fit -band in lacrosse.Industry-first adjustable "tilt" designed into Raptor helmet.Incredibly light weight for optimal mobility and comfort.Removable and washable interior foam padding.Sleek visor designed for maximum peripheral vision.Steel face mask designed for vision and intentionally shifted away from face to maximize protection.SUPERIOR ENERGY MANAGEMENT: The primary construction is a one-piece, energy absorbing expanded polypropylene (EPP) foam liner that is bonded to a thing polycarbonated outer shell through heat-activated adhesive ink in a revolutionary patent-pending process. This construction allows for maximum thickness of he protective liner without adding unnecessary weight.ONE-PIECE PROTECTION: The one-piece EPP foam also has the advantage of distributing the energy from impact to the head over a broader area, versus "point loading" that can occur with other helmet protection systems. The result is a highly protective helmet that is significantly lighter than other helmets on the market.FIT & FUNCTION: Unlike other helmets that design to the "one size fits most" model, the Raptor is available in three shell sized. Significant time and effort was spent making sure the fit was optimized for comfort and performance. This design is further perfected with the Giro snow fit system that micro-adjusts to tighten at the back of the head as well as up and down to get the right "tilt" for proper vision, eliminating the middle-bar syndrome! The ultimate result is a helmet fit that is unmatched in the market. Additionally, the Raptor's foam comfort pads are removable and washable. The helmet comes with cheek pads in two different thicknesses for a snug fit.RIGID CHIN BAR: A fiberglass-filled chin bar creates a stiffer and more durable component compared to what is typically seen with industry standard injection-molded parts. The Raptor chin bar is fabricated using toughened nylon, the same material used for military specs, this piece is extremely durable in securing the face cage to the chin bar and provides protection and energy management during frontal impacts.VISOR: The sides and top of the Raptor's visor were cut back to maximize peripheral vision. The black powder coated steel facemask is designed for vision and was intentionally shifted away from the face to maximize protection. SIZING:X-Small/Small - 20.5" to 22.0" head circumference (52-56cm) - 6 1/2-7 hat sizeMedium/Large - 21.7" to 23.2" head circumference (55-59cm) - 6 7/8-7 3/8 hat sizeXL/XXL - 22.8" to 24.4" head circumference (58-62cm) - 7 1/4-7 3/4 hat size Minimize