> Sport and Outdoor > 2003 bmw 540/store sjf material handling

Rainier Tank Bag for BMW R1150GS & GSA by Wolfman- Made in ... Read more

Rainier Tank Bag for BMW R1150GS & GSA by Wolfman- Made in USA The Rainier Tank Bag is the result of years of testing and research. It is the ultimate universal tank bag that is very popular on dual sport motorcycles including BMW R1150GS/A. Made of quality materials and hardware, this tank bag provide years of dependable use and durability. The universal mounting system allows the rider to adjust the fore-aft placement on the tank. This heavy duty bag is water-resistant. We have a waterproof rain cover for it available separately for $16.99 USD. Rainier Tank Bag Features: Yellow cord Main Opening Zippers Heavy Duty #10 YKK Main Zipper, and Ykk zippers used through out the bag. Heavy Duty 1680 Denier Ballistic Nylon Construction Tough-Tek Non Slip-Non Scratch Bottom Envelope Side and Rear Pockets for increased handle bar clearance Wolfman Signature-Crescent Rider pocket. Large Expansion Wedge shaped Gusset Zippered Interior mesh pocket Key Clip Outside Elastic Pen/Tire Pressure Guage Slee Minimize

RC Car & Truck Ceramic Lightning Yellow Seal Bearing kits a ... Read more

RC Car & Truck Ceramic Lightning Yellow Seal Bearing kits are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The heavy duty rubber seal provides extra protection against the harshest elements; the ceramic ball provides lower friction and increased durability. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Yellow sealed bearings are packed in grease and will require a short break in period to loosen up. KIT (22) TAMIYA NISSAN SKYLINE, BMW M3 SEDAN, TA01 SERIES, F-150 - SEE REFERENCE GUIDE FOR THE OTHER MODELS Minimize

Rainier Tank Bag for BMW BMW R1200GS/A by Wolfman- Made in ... Read more

Rainier Tank Bag for BMW BMW R1200GS/A by Wolfman- Made in USA The Rainier Tank Bag is the result of years of testing and research. It is the ultimate universal tank bag that is very popular on dual sport motorcycles including BMW GS's. Made of quality materials and hardware, this tank bag provide years of dependable use and durability. The universal mounting system allows the rider to adjust the fore-aft placement on the tank. This heavy duty bag is water-resistant. We have a waterproof rain cover available separately for it for $16.99 USD. Rainier Tank Bag Features: Yellow cord Main Opening Zippers Heavy Duty #10 YKK Main Zipper, and Ykk zippers used through out the bag. Heavy Duty 1680 Denier Ballistic Nylon Construction Tough-Tek Non Slip-Non Scratch Bottom Envelope Side and Rear Pockets for increased handle bar clearance Wolfman Signature-Crescent Rider pocket. Large Expansion Wedge shaped Gusset Zippered Interior mesh pocket Key Clip Outside Elastic Pen/Tire Pressure Guage Sleeve Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits ar ... Read more

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits are specially designed for on-road or relatively clean driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The Ultra Seal is a non-contact, frictionless seal that is placed beneath the metal shields so they are still considered maintenance free and lubed for life. The non-contact seal eliminates any drag typically associated with a rubber sealed bearings and still provides extra protection against external elements. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Ultra Seal bearings are packed in grease and will require a short break in period to loosen up. KIT (22) TAMIYA NISSAN SKYLINE, BMW M3 SEDAN, TA01 SERIES, F-150 - SEE REFERENCE GUIDE FOR THE OTHER MODELS Minimize

ROX SPEED FX BAR RISER ANTI-VIBRATION 2 1/4" ACTUAL PHOTO O ... Read more

ROX SPEED FX BAR RISER ANTI-VIBRATION 2 1/4" ACTUAL PHOTO OF THE ITEM YOU WILL RECEIVE PART #1R-AV2PP (5491 ) THESE RISERS GIVE YOU 2 1/4 INCHES IN EXTRA HEIGHT THEY CAN BE PIVOTED FRONT TO BACK FOR OPTIMUM PERFORMANCE WORKS ON MOST 1 1/8" STEM CLAMPS FOR SNOWMOBILES, ATVs, AND MOTORCYCLES WITH 1 1/8"TAPERED HANDLEBARS Rox Patented Anti-Vibration Pivoting Snowmobile Handlebar Risers Anti-Vibe design reduces vibration in bars at high RPM's and provides a shock dampening feature to protect compon Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

In addition to the standard Cornilleau table tennis table f ... Read more

In addition to the standard Cornilleau table tennis table features including quality production and materials, ease of use, best safety design , excellent warranty, and playback mode all described in the category introduction, the Cornilleau Competition 540 Indoor features: - 7/8” high-density chipboard playing surface with SKILTOP® finish for excellent ball adherence and bounce - 1 3/4” structural galvanized steel frame to support the playing surface - all galvanized steel frame construction designed to be sturdy and easy to handle - 6” double-wheel banded casters - permanent cotton net system with tension and height adjustment The table weighs 214 lbs and folds compactly for storage at 62” H x 74” W x 30” D Minimize

Features & Benefits: * Greatly reduces rider fatigue and st ... Read more

Features & Benefits: * Greatly reduces rider fatigue and strain on hand and wrist * While cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set * Very simple to operate, even with heavy winter gloves * High quality, compact and durable design, super smooth action * Takes less than 5 minutes to fit * Less wear and tear on throttle cables and linkages * Can result in reduced fuel consumption Fits: BMW F650GS, '08-'12 with BMW OEM Brand Handguards BMW F800GS, '08-'12 with BMW OEM Brand Handguards ONLY fits bikes with BMW OEM Brand Handguards Does NOT fit with Touratech, Cycra, or Barkbuster Handguards. To install, just remove the right hand bar weight, and firmly tighten the central retaining screw. Operation: The friction nut has a left-hand thread. This action tightens the nut and provides sufficient friction to set throttle to the desired opening. It simply has a slight stiffness to it.) Kaoko Safety Warning: The Kaoko Cruise Control is an aftermarket accessory. Minimize

Wide MK3 Pivot Pegz High Performance Pivoting Footpegs for ... Read more

Wide MK3 Pivot Pegz High Performance Pivoting Footpegs for BMW R1100GS All Years. Model # PP-12MK3 World's #1 High Performance Pivoting Footpegs Relieves Ankle and Knee Fatigue and Increases Motorcycle Control These MK3 Pivot Pegz are precision built and made from solid aerospace grade stainless steel, polished to a mirror finish and designed to perform like no other peg. Pivot Pegz are a patented, race proven product that actively tracks with the motion of the riders foot to provide superior grip and load distribution whist reducing impact and fatigue. Thousands of users worldwide will lay testament to the performance benefits and rider/bike synergy that Pivot Pegz provide. And to cap it off Pivot Pegz are one of the few motorcycle products that actually save you money due to the fact that the pivoting nature extends the life of the soles of your riding boots. Mark 3 Pivot Pegz Strength and Durability: Pivot Pegz® have been designed and built to last and are backed by our exclusive LIFETIME WARRANTY. Pivot P Minimize

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits ar ... Read more

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits are specially designed for on-road or relatively clean driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The Ultra Seal is a non-contact, frictionless seal that is placed beneath the metal shields so they are still considered maintenance free and lubed for life. The non-contact seal eliminates any drag typically associated with a rubber sealed bearings and still provides extra protection against external elements. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Ultra Seal bearings are packed in grease and will require a short break in period to loosen up. KIT (22) TAMIYA ALFA ROMEO, CASTRO CELICA, BLITZ TOYOTA,TA02, (SEE REFERENCE GUIDE FOR THE OTHER MODELS) Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

Explorer Lite Tank Bag for BMW R1200GS GSA by Wolfman- Made ... Read more

Explorer Lite Tank Bag for BMW R1200GS GSA by Wolfman- Made in USA We have been paying attention. Our riders want a tank bag that has the same curved bottom as the Rainier tank bag but not as big. Wolfman is proud to offer the Explorer Lite.The Explorer Lite fits a very wide range of motorcycles including BMW GS's and most other dualsport/enduro bikes. This tank bag especially fits the KTM 950/990 Adventure (It nestles between the two gas caps so you do not have to remove the bag to get gas.)Fe Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

Kaoko® Cruise Control for BMW R1150RT, R1150R, R1150GS, and ... Read more

Kaoko® Cruise Control for BMW R1150RT, R1150R, R1150GS, and R1150GS Adventure Kaoko Cruise Controls are our favorite friction cruise control. They are easy to install, look great, and work great with gloves on. The Kaoko Cruise Controls consist of a friction nut that is integral with a replacement handlebar-end weight. Features & Benefits: * Greatly reduces rider fatigue and strain on hand and wrist * While cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set * Very simple to operate, even with heavy winter gloves * High quality, compact and durable design, super smooth action * Takes less than 5 minutes to fit * Very little maintenance is required * Less wear and tear on throttle cables and linkages * Can result in reduced fuel consumption Fits: BMW R1150GS BMW R1150GS Adventure BMW R1150RT BMW R1150R To install, just remove the right hand bar weight, replace it with Kaoko's bar weight, and firmly tighten the central retaining screw. Operation: The friction nut has a Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

RC Car & Truck Ceramic Lightning Yellow Seal Bearing kits a ... Read more

RC Car & Truck Ceramic Lightning Yellow Seal Bearing kits are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The heavy duty rubber seal provides extra protection against the harshest elements; the ceramic ball provides lower friction and increased durability. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Yellow sealed bearings are packed in grease and will require a short break in period to loosen up. KIT (22) KYOSHO SUPER TEN FW-04, MCLAREN BMW F1, FW-04/W GS-15R Minimize

-Material: Palm of the hand, double layers, back of the han ... Read more

-Material: Palm of the hand, double layers, back of the hand partially Nappa kid leather, 0.7 / 1.0 mm, with hydrophobic treatment. Hand back: Cordura® stretch. GORE TEX® membrane. -Lining: light functional Jersey pique fabric with perspiration dissipation properties. -New GORE TEX® technology, first introduced with the Atlantis 2 gloves. X-TRAFITTM ensures a perfect and wrinkle free fit, a good grip and fit. X-TRAFITTM is a 3 layer design with the layers glued / laminated together. The lining is attached to the membrane and the membrane in turn to the leather = no more pulling out with wet or sweaty hands. Easy to get in with wet hands no twisted or shifted membrane to obstruct the openings for the fingers. Back of the hand with light padding to prevent cooling down in the rain. Velcro tab at wrist. Large Velcro tab at the inside of the gauntlet. Protection: Double layers of leather at the palm and side of the hand with Kevlar? backing. Knuckles equipped with leather stretch. Back of the hand has impact absorbing Temperfoam®, 3 mm thick. -Visibility: 3M stripes along the edge of the hand and gauntlet. -Weather protection: Permanently wind and waterproof and high breathable with X-TRAFITTM. -Climatic balance: Extremely light functional lining to prevent cooling in the rain and to dissipate perspiration reducing the "wet" feeling even at higher temperatures -Wear comfort: Extremely easy to put on / pull off always! Wrist bar and large adjuster bar at the gauntlet for individual width adjustment. Therefore excellent connection to the sleeves. Stretch sections on the back of the hand. Optimised grip due to a permanently attached membrane, no "floating" inside the gloves or annoying wrinkles. -Wiper lip: Made of rubber on the left index finger. -Logo: Embroidered BMW logotype with a slight contrast on both index fingers. Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

The BMW M Bike translates the BMW M lightweight design phil ... Read more

The BMW M Bike translates the BMW M lightweight design philosophy into the world of two wheels and weighs just 16.3 pounds! Its unmistakable frame design with an anthracite-colored carbon finish and the BMW M logo on the top tube are also reminiscent of the BMW M vehicles. Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

From now on you can show what you are made of in every situ ... Read more

From now on you can show what you are made of in every situation. And no wonder, because your spine, pelvis, shoulder blades, and now even your collarbone are protected by an impact-proof inner core, and impenetrable plastic outer shell. Individually adjustable at several points to fit your body contours, the BMW Protector Vest allows a high precision fit. Special distance-keeping materials and air slits provide additional ventilation comfort. Better safe than sorry, and what is definitely safe is the certification of this product in accordance with the latest European norm (EN 1621-2, Level 2), with the most demanding impact test for back protectors. -Sleeveless protector jacket/vest -Comfortable rear cover -100% polyurethane (PU) protector -Polyamide/elasthane shell -Anatomically pre-shaped back protector -DIN 1621, level 2 certification with residual force values between 5 and 6.5 kN, the highest level in this standard -Covers the spinal column, shoulder blades and kidney area -PU protector material around the collar bone -Exceptional shock absorption -Allows air to circulate freely -Steplessly length adjustable shoulder straps, kidney belt and chest fastener -"BMW Motorrad" lettering on the kidney belt -Unisex Sizes Small thru XX Large Minimize

Cleveland Indians Fleer Collectibles 2002 BMW X-5The 1:24 s ... Read more

Cleveland Indians Fleer Collectibles 2002 BMW X-5The 1:24 scale die-cast BMW X5 features the logos, colors and names of the hottest MLB teams. Fleer will produce a limited number of each team. Each MLB BMW X5 is approximately 7" long, 3" wide and 3" tall Minimize

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits ar ... Read more

RC Car & Truck Ceramic Lightning Ultra Seal Bearing kits are specially designed for on-road or relatively clean driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The Ultra Seal is a non-contact, frictionless seal that is placed beneath the metal shields so they are still considered maintenance free and lubed for life. The non-contact seal eliminates any drag typically associated with a rubber sealed bearings and still provides extra protection against external elements. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Ultra Seal bearings are packed in grease and will require a short break in period to loosen up. KIT (22) KYOSHO SUPER TEN FW-04, MCLAREN BMW F1, FW-04/W GS-15R Minimize

M Black Logo Plate Raised name on stainless steel plate. Hi ... Read more

M Black Logo Plate Raised name on stainless steel plate. Highlights Black powder-coated heavy guage stainless steel standard license plate with 3d logo. Includes black snap caps (screw covers & washers). Dimensions 12" „ 6" Made in USA Backed by lifetime warranty against defects & rust. Official Licensed Product. Stainless Steel Made of heavy-gauge 304 stainless steel that will not rust or corrode. Black Finish Black powder-coated finish. Snap Caps Matching snap caps included for perfect look. 3D Logo Raised logo on plate to give 3D look. Dimensions 6.00" height x 12.00" width. Minimize

Kaoko® Cruise Control for BMW K1300GT and K1200GT Kaoko Cru ... Read more

Kaoko® Cruise Control for BMW K1300GT and K1200GT Kaoko Cruise Controls are our favorite friction cruise control. They are easy to install, look great, and work great with gloves on. The Kaoko Cruise Control consists of a friction nut that is integral with a replacement handlebar-end weight.Features Benefits: * Greatly reduces rider fatigue and strain on hand and wrist * While cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set * Very simple to operat Minimize