|
BRAND NEW Product Description The Janome Embroidery Machine
... Read more
BRAND NEW Product Description The Janome Embroidery Machine Five Pin Spool Stand attaches easily to the handle of your machine. When using multiple colors of embroidery thread Janome Embroidery Machine Five Pin Spool Stand makes for trouble free embroidery, allowing you to set out your colors as you sew. Janome Embroidery Machine Five Pin Spool Stand works with: MC11000 MC11000SE MC200E Janome part number 860406000
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
SquareTrade AP6.0 Janome 9102D Serger Sewing Machine TABLE
... Read more
SquareTrade AP6.0 Janome 9102D Serger Sewing Machine TABLE Janome 9102D Table SquareTrade AP6.0 Janome Extension Table for 9102D Serger Sewing Machines Fits around machine Brand New In the Sealed Container Easy Terms Price $50.00 The Extension Table is Compatible ONLY with the Janome Model 9102D An extension table is a wonderful tool for many of your sewing needs! While supporting your fabric to the left of your work area, you are free to sew without the tug and pull of excess fabric weight. Gr
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
Janome Embroidery Hoop B is the large hoop that comes with
... Read more
Janome Embroidery Hoop B is the large hoop that comes with the Memory Craft Embroidery machines. It has a maximum sewing area of 5.5 inches by 7.9 inches.Hoop fits these Janome models:300E350E950097001000010001
Minimize
|
|
Go To Store
|
|
The Janome Embroidery Hoop A is the 5" x 4.3" hoop that com
... Read more
The Janome Embroidery Hoop A is the 5" x 4.3" hoop that comes with all of the machines listed. It comes with the grid template and attatchment screw.Hoop fits the following machines:Janome 300EJanome 350EJanome 9500Janome 9700Janome 10000Janome 10001
Minimize
|
|
Go To Store
|
|
Developed in a collaborative effort with Wilcom Internation
... Read more
Developed in a collaborative effort with Wilcom International, the industry's top embroidery software developer, Janome's Digitizer MB software combines easy to use functionality with a powerful software engine to give you the freedom to express yourself. From editing individual stitches to layouts of large, multi-hoop designs and full stitch-out simulations, Digitizer MB can handle it all with ease. Whether you are new to digitizing or a seasoned professional, enter the future of embroidery with DigitizerMB!
Minimize
|
|
Go To Store
|
|
This Janome CoverPro presser foot is designed for the appli
... Read more
This Janome CoverPro presser foot is designed for the application of wide elastic to the bottom side of the fabric when sewing. It has an adjustable tension system for stretching the elastic as it is sewn to the material and a built-in guide to hold the elastic in the perfect place. Fits the following models:900CP1000CP
Minimize
|
|
Go To Store
|
|
Developed in a collaborative effort with Wilcom Internation
... Read more
Developed in a collaborative effort with Wilcom International, the industry's top embroidery software developer, Janome's Digitizer MB software combines easy to use functionality with a powerful software engine to give you the freedom to express yourself. From editing individual stitches to layouts of large, multi-hoop designs and full stitch-out simulations, Digitizer MB can handle it all with ease. Whether you are new to digitizing or a seasoned professional, enter the future of embroidery with DigitizerMB!
Minimize
|
|
Go To Store
|
|
This spring loaded circular hoop for the Memory Craft embro
... Read more
This spring loaded circular hoop for the Memory Craft embroidery machines utilizes the same sewing field as the Standard Hoop A, and is designed to hoop difficult or bulky fabrics easily.This hoop fits the following Janome machines:300E350EMC9500MC9700MC10000MC10001Kenmore MachinesElite Model 19005Elna Machines8600 Xplore8300 Xperience8200 Xperience
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 2
... Read more
This is the Upper and Lower cutting Blades for the Janome 203 serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
The New Janome Convertible Free Motion Quilt Foot Set for L
... Read more
The New Janome Convertible Free Motion Quilt Foot Set for Low Shank Models includes three different feet that attach to the holder with a screw for maximum sturdiness and safety.Feet included in the package are:Closed Toe Foot for general use with lace and catchable fabrics.Open Toe Foot for general use and extra visibility Clear View Foot for uneven surfaces and evenly spaced quilting.
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 2
... Read more
This is the Upper and Lower cutting Blades for the Janome 204D serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 2
... Read more
This is the Upper and Lower cutting Blades for the Janome 234 serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
Quilting Attachment set for all Janome Jem Gold machines.
|
|
Go To Store
|
|
The Janome Free Arm Hoop (C) is a 2" × 2" hoop designed for
... Read more
The Janome Free Arm Hoop (C) is a 2" × 2" hoop designed for easy embroidering inside of the sleeve of a shirt or the leg of a pair of pants. The curved design of the hoop holder allows you to take full advantage of the free arm on the sewing machine when embroidering in hard to reach places.For Janome 10001, 10000, 9700, 9500, 350E and 300E Embroidery Machines.
Minimize
|
|
Go To Store
|
|
The Center Guide Foot for the CoverPro 1000CP allows you to
... Read more
The Center Guide Foot for the CoverPro 1000CP allows you to line up the center of a two needle stitch with an existing seam for straighter, more accurate stitches. It is excellent for sportswear and gives extra strength to seams that are exposed to a lot of strain. Use it to tack down already sewn seams or to finish with a decorative effect. Place the center guide in an existing seam, lower the foot, and follow the existing seam as you sew .
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 1
... Read more
This is the Upper and Lower cutting Blades for the Janome 134D serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
Straight Stitch Foot and Plate for Fine Fabrics Janome 1600
... Read more
Straight Stitch Foot and Plate for Fine Fabrics Janome 1600P Series MachinesFits All Janome 1600P Series Models:Janome 1600PJanome 1600P-DBJanome 1600P-DBX
Minimize
|
|
Go To Store
|
|
Developed in a collaborative effort with Wilcom Internation
... Read more
Developed in a collaborative effort with Wilcom International, the industry's top embroidery software developer, Janome's Digitizer MB software combines easy to use functionality with a powerful software engine to give you the freedom to express yourself. From editing individual stitches to layouts of large, multi-hoop designs and full stitch-out simulations, Digitizer MB can handle it all with ease. Whether you are new to digitizing or a seasoned professional, enter the future of embroidery with DigitizerMB!
Minimize
|
|
Go To Store
|
|
The attachment creates a ½" finished binding and can be adj
... Read more
The attachment creates a ½" finished binding and can be adjusted to accommodate a traditional straight stitch binding finish or a blanket stitch finish. The attachment plate included with this set can also be used interchangeably with those sold with the CoverPro Tape Binders for 5/16" (795824014) and 7/16" (795842007).For use with these Janome models :MC7700MC11000 Special EditionMC11000MC6600PMC6500P
Minimize
|
|
Go To Store
|
|
Taping Foot with Tape Reel for use with 734D, 644D, 744D, 9
... Read more
Taping Foot with Tape Reel for use with 734D, 644D, 744D, 9002D, HF504D, HF9102D, 634D, 204D, 504D, 534D, 434D, 1110DX, 7034D
Minimize
|
|
Go To Store
|
|
Heavy Duty Adjustable Darning Foot with Darning Plate for J
... Read more
Heavy Duty Adjustable Darning Foot with Darning Plate for Janome DB Hook MachinesFits All Janome 1600P Series Models:Janome 1600PJanome 1600P-DBJanome 1600P-DBX
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 6
... Read more
This is the Upper and Lower cutting Blades for the Janome 644D serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
The Pro Plus Kit contains all the accessories available for
... Read more
The Pro Plus Kit contains all the accessories available for the 1600P series machines, enabling you to enjoy the sleek design and convenient features of a home machine while achieving fast, professional results.Includes the Ultra Glide foot, Straight Stitch Foot with Needle Plate, Narrow Straight Stitch Foot, Velvet Foot, Adjustable Zipper Foot, Darning Foot with Darning Plate, Concealed Zipper Foot, Even Feed Foot, and a 16" × 24" extension table with fold down legs.
Minimize
|
|
Go To Store
|
|
The Center Guide Foot for the CoverPro 900CP allows you to
... Read more
The Center Guide Foot for the CoverPro 900CP allows you to line up the center of a two needle stitch with an existing seam for straighter, more accurate stitches. It is excellent for sportswear and gives extra strength to seams that are exposed to a lot of strain. Use it to tack down already sewn seams or to finish with a decorative effect. Place the center guide in an existing seam, lower the foot, and follow the existing seam as you sew .
Minimize
|
|
Go To Store
|
|
Partial Transparent foot for a the Janome CoverPro 1000CP.
... Read more
Partial Transparent foot for a the Janome CoverPro 1000CP. Use this when doing decorative stitching or in hard to sew areas so you can see where you are wanting to sew with ease.
Minimize
|
|
Go To Store
|
|
Partial Transparent foot for a the Janome CoverPro PC900 Se
... Read more
Partial Transparent foot for a the Janome CoverPro PC900 Serger. Use this when doing decorative stitching or in hard to sew areas so you can see where you are wanting to sew with ease.
Minimize
|
|
Go To Store
|
|
Small 50mm x 50mm (2" by 2") embroidery frame for the Janom
... Read more
Small 50mm x 50mm (2" by 2") embroidery frame for the Janome 200E Embroidery only machine.
Minimize
|
|
Go To Store
|
|
Solid Metal Hemmer Foot Janome 1600P Series MachinesFits Al
... Read more
Solid Metal Hemmer Foot Janome 1600P Series MachinesFits All Janome 1600P Series Models:Janome 1600PJanome 1600P-DBJanome 1600P-DBX
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 2
... Read more
This is the Upper and Lower cutting Blades for the Janome 234D serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
|
This is the Upper and Lower cutting Blades for the Janome 1
... Read more
This is the Upper and Lower cutting Blades for the Janome 134D serger. NOTE: It is recommended that you replace both blades when you replace the blades. Not doing so can damage the the new blade.
Minimize
|
|
Go To Store
|
