> Security Systems and Surveillance > Security Camera Accessories and Parts > Surveillance-video.com

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

The KTD-314-1 is an interface device that converts Digiplex ... Read more

The KTD-314-1 is an interface device that converts Digiplex® RS422 commands to a Pelco Coaxitron 9500 extended protocol output, enabling a Digiplex system to control Pelco receivers and domes. The output enables iris, focus, zoom, and preset control of a Pelco receiver. One KTD-314-1 is required for each Pelco receiver in a Digiplex system. FEATURES: Converts Digiplex protocol to Pelco protocol System 9500 Coaxitron interface Preset control of PTZ receiver Removable terminal strip 9 VAC power LED video signal indicator Compact and wall-mountable Easy to install PDF Spec Sheet Minimize

http://360.sorensonmedia.com/9a34027aTc561m4299ja16b4c3bc1c ... Read more

http://360.sorensonmedia.com/9a34027aTc561m4299ja16b4c3bc1cbb567a/embedv2.js Minimize

The EX11MNX is designed for the professional security provi ... Read more

The EX11MNX is designed for the professional security provider who requires an easy-install fixed-camera that performs without compromise on a 24/7 - Day/Night basis. This compact aesthetic integration of Extreme CCTV’s CCD imaging and infrared illumination technologies guarantees superb color performance under day conditions and LXRNight Vision performance in total darkness. The unique design (patent pending) combines two cameras, infrared illumination and photocell control to give the best day and night surveillance possible. The EX11 features CNC machined anodised aluminum, the same material used to protect satellites from the severe environments of outer space. Anodised aluminum is an incredibly durable material with high corrosion resistance and heat-resistant to over 1,200º F. Unlike other finishes, anodised aluminum has astounding chemical stability and will resist changes to color or Appearance, even under heavy exposure to ultraviolet rays. Low voltage operation, low power consumption, LED illuminators, solid state CCD technology and controlled regulated voltage means the EX11MNX will operate efficiently for years of trouble free performance. FEATURES: CCD 1/3" LXR CCD EIA: 510 (H) x 492 (V) • CCIR: 500 (H) x 582 (V) Resolution: 420 TVL S/N Ratio Greater than: 50 dB Daytime Sensitivity: 0.05 Lux @ F2 Night-time Sensitivity: 0.0 Lux - works in total darkness Lens Options: 3.6mm, 4.3mm, 6mm, 8mm or 12mm fixed lens Electronic Shutter: Up to 1/100,000 s Gamma: 0.45 Video Output: 1 Vp-p, 75 Ohms Day-Night Switching: Photocell-controlled, automatic Photocell Sensitivity: adjustable LEDs High-efficiency, intensity adjustable Wavelength: 850nm or 940nm Number of LEDs: 42 Voltage Supply: 12 VDC or 24 VAC Power Consumption: 354mA at 24VDC Construction CNC milled anodised aluminium Windows: 1/8" polycarbonate Operational Range: -50°C to +40°C | -58ºF to +104ºF Wall Bracket Basic wall bracket included Overall Dimensions: 152mm (H) x 82.5mm (W) x 93mm (D) | 6.0" (H) x 3.2" (W) x 3.7" (D) Weight with Bracket: 4.4 lbs | 2.0 kg PDF Spec Sheet Minimize

http://lib.store.yahoo.net/lib/surveillance-video/authorize ... Read more

http://lib.store.yahoo.net/lib/surveillance-video/authorized-NUVICO.gif Minimize

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

Computar's 1/2" 8-48mm C-Mount 6X motorized zoom series pro ... Read more

Computar's 1/2" 8-48mm C-Mount 6X motorized zoom series provide a 44.6-8.0 degree horizontal angle of view on a 1/2" format camera. They can be used on 1/2" or smaller format C or CS mount cameras. A fast F1.2 maximum aperture provides good low light performance. 1/2" Motorized Zoom Lens offers 3 motors, Spot filter and Preset on Focus & Zoom. FEATURES: For 1/2" format C-Mount Focal Length : 8.0 ~ 48mm Max. Aperture Ratio : 1:1.2 Down Angle View : 55.8 ~ 9.9 degrees Horizontal View : 44.6 ~ 8.0 degrees Vertical View : 33.5 ~ 6.1 degrees Max. Image Format : 6.4mm x 4.8mm PDF Spec Sheet Minimize

The EX50 is a 7” explosion protected camera for effective s ... Read more

The EX50 is a 7” explosion protected camera for effective surveillance at high risk environments. Designed for hazardous industrial locations including the entire range of OSHA (UL) designations for explosive locations. Its stringent Class I, Division I certifications allow safe functioning at locations where ignitable concentrations of flammable gases or liquid vapors are present during normal operation. Groups covered include acetylene, hydrogen, ethylene and methane, all highly explosive gases. The EX50 is also certified for operation in areas where ignitable concentrations of combustible dusts (such as carbon-based or agricultural dusts) are present during normal operation The EX50 is also designed to CCTV industry standards for mounting hardware and motorized pan/tilt devices. FEATURES: Heavy duty extruded aluminium design with four entry plugs Class I, Div 1 & 2, Groups A, B, C, D Class II, Div 1 & 2, Groups E, F, G Class III CSA – NRTL Approved to OSHA standards MFP Technology (Mechanical Filter with Photocell) CCD models for outstanding color and IR sensitivity LXR CCD models for excellent IR sensitivity, low smear, low streak and excellent anti-blooming characteristics Gain Control: AGC (with on/off switch) Easy access slide tray allows for fast installation and easy camera adjustments 3/8” chemical resistant window Optional Lexan ballistic window Optional heater / blower Various compatible mounting hardware Various fixed lenses available Temperature Code T6 at maximum ambient temperature 55ºC | 131ºF NTSC: 768 (H) x 494 (V) • PAL: 752 (H) x 582 (V) U-Bracket with stainless steel straps included Robust aluminum extrusion with four entry plugs Voltage: 12 to 24 AC/DC Environmental IP66 compliant APPLICATIONS: Chemical factoriesPetroleum refineries, oil and gas processingUtility gas plantsGrain elevators, flour mills Dry cleaning plantsPharmaceutical plantsCoal and carbon processingAircraft hangarsSpray finishing areas Munitions and fuel storage facilities PDF Spec Sheet Minimize

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

http://360.sorensonmedia.com/495e8471X5854F4fa8Ha09etd5711e ... Read more

http://360.sorensonmedia.com/495e8471X5854F4fa8Ha09etd5711e3461e9/embedv2.js Minimize

A compact CCD camera in an explosion protected standard hou ... Read more

A compact CCD camera in an explosion protected standard housing is a versatile and cost effective surveillance system for hazardous factory applications. The EX70 can be installed very close to operating equipment in hazardous factories. A range of lenses from wide angle 3.6 mm to longer range 12.0 are available at high resolution using 1/3” CCD sensors. Models with IR sensitive CCDs are also available for effective low light performance. LXR type CCDs offer enhanced infrared spectral response while Integrated Day-Night models include infrared for video performance in total darkness. FEATURES: Compact explosion protected enclosure Preharnessed plug & play High resolution monochrome or color Economical hazardous area solution Voltage regulator equipped for 12VDC / 24VAC input 3/4” NPT Openings APPLICATIONS: Hazardous Location surveillance Explosion Protected surveillance Rugged All-Weather surveillance Factories, Industrial Plants Munitions Storage Fuel Storage Facilities Wall-Mount Installations Machine Vision PDF Spec Sheet Minimize

http://site.surveillance-video.com/pdf/pelcoProduct3.jpg

A two-piece injection molded design allows a watertight sea ... Read more

A two-piece injection molded design allows a watertight seal for IP67 and NEMA 6 & 6P ratings. Made of corrosion-proof Nylon and stainless steel, this compact egg shaped camera has remarkable performance for all environments. Easy access to the internal electronics reveals voltage regulation, spike protection, and the ability to convert up to 24 volts of DC or AC power to a clean DC voltage to ensure long, reliable CCD camera operation. Pre-wired with a 5 foot (1.6 m) pigtail for plug and play installation, the EX10 is available with fixed lenses from 2.9 mm to 25 mm. The EX10 is available in monochrome and color models. A nylon wall bracket is included with each order. A stainless steel U-bracket can be ordered as a no-charge option in lieu of the wall bracket. FEATURES: Injection molded plastic housing. polycarbonate window. Sony Chip 1/3" CCD Monochrome Standard. Color chip available. Voltage regulation /Power protection. Input power in 12 - 24 volts AC or DC. Easy access for lens adjustments. Universal mounting bracket included. IP67, NEMA 6, NEMA 6P Ratings for protection from rain, snow, circulating dust, corrosive agents, temporary and prolonged submersion. General commercial usage for rugged, effective all-weather CCTV Food industry washdown rooms Schools, hospitals, recreation centers Water / sewage treatment plants Industrial clean rooms Marine installations The EX10 is used in this St. Louis Shark Tank as a webcam. Submerged in water 24 hours a day, 7 days a week. PDF Spec Sheet Minimize

A two-piece injection molded design allows a watertight sea ... Read more

A two-piece injection molded design allows a watertight seal for IP67 and NEMA 6 & 6P ratings. Made of corrosion-proof Nylon and stainless steel, this compact egg shaped camera has remarkable performance for all environments. Easy access to the internal electronics reveals voltage regulation, spike protection, and the ability to convert up to 24 volts of DC or AC power to a clean DC voltage to ensure long, reliable CCD camera operation. Pre-wired with a 5 foot (1.6 m) pigtail for plug and play installation, the EX10 is available with fixed lenses from 2.9 mm to 25 mm. The EX10 is available in monochrome and color models. A nylon wall bracket is included with each order. A stainless steel U-bracket can be ordered as a no-charge option in lieu of the wall bracket. FEATURES: Injection molded plastic housing. polycarbonate window. Sony Chip 1/3" CCD Monochrome Standard. Color chip available. Voltage regulation /Power protection. Input power in 12 - 24 volts AC or DC. Easy access for lens adjustments. Universal mounting bracket included. IP67, NEMA 6, NEMA 6P Ratings for protection from rain, snow, circulating dust, corrosive agents, temporary and prolonged submersion. General commercial usage for rugged, effective all-weather CCTV Food industry washdown rooms Schools, hospitals, recreation centers Water / sewage treatment plants Industrial clean rooms Marine installations The EX10 is used in this St. Louis Shark Tank as a webcam. Submerged in water 24 hours a day, 7 days a week. PDF Spec Sheet Minimize

The EX5 Series cameras are high performance CCD boards that ... Read more

The EX5 Series cameras are high performance CCD boards that are integrated with lenses, control devices and various options, all mounted to versatile metal bracketry to make for easy final installation into enclosures. Security professionals can design their own camera features by picking from a large array of available options. The EX5 Series is ideal for integration into Extreme CCTV models EX15 and EX60 FEATURES: High performance 1/3” CCDs MFP Technology (Mechanical Filter with Photocell) models for outstanding color and IR sensitivity Dual window (IR-Cut and IR-Pass) Mechanical Filter models for optimized 24/7 performance LXR models for excellent IR sensitivity, low smear, low streak and excellent anti-blooming characteristics Photocell-controlled day-night switching models 12 VDC / 24 VAC operation, VRB power protected Full-size housing accommodates 5-50mm varifocal auto-iris lenses for installation ease and protection from “white out” Gain Control: AGC (with on/off switch) Easy access slide tray allows for fast installation and easy camera adjustments Power Supply 12 to 24 AC/DC Resolution 380 TVL To 550 TVL APPLICATIONS: Outdoor surveillanceExtreme environmentPorts and harboursCommercial campuses Critical infrastructureHomeland SecurityHigh-end residentialSchool and universities PDF Spec Sheet Minimize

The WZ49-K108 Conical No-Grip™ (CNG™) dome is designed to b ... Read more

The WZ49-K108 Conical No-Grip™ (CNG™) dome is designed to be virtually impossible to grip or hang from. In high-risk areas, such as hospitals or prisons, the camera helps to prevent at-risk persons from self-inflicted harm. The CNG™ is totally vandal-resistant and engineered for reliability and performance. FEATURES: Day-night 1/2” LXR CCD with mechanical filter technology for vivid color by day and exceptional performance under infrared Conical No-Grip™ design for maximum safety Impossible to grip or hang from 5-Year Unbreakable Guarantee Upgraded Sony CCDs for improved picture quality New VRBs for increased reliability APPLICATIONS: Prisons and correctional facilities Hospitals Psychiatric facilities Detention centers C0ommercial sites Holding cells Hotels / apartments PDF Spec Sheet Minimize

For different variation of this product Click Here