The KPCW-6 is perfect for controlling all UPB-compatible lo ... Read more

The KPCW-6 is perfect for controlling all UPB-compatible load control devices such as the PulseWorx Wall Switch Dimmers, Fixture Modules, Lamp Modules, Appliance Modules, Output Modules, etc. The KPCW-6 has eight blue backlit horizontal pushbuttons that can be custom engraved (for a nominal charge) for ease of use and to add beauty and functionality to any room. The backlit pushbuttons illuminate when pressed or when a button or load they are tracking is activated. Select from 16 commands to be transmitted when each pushbutton is tapped, double-tapped, held or released. This allows the KPC to remotely control other UPB-compatible devices and/or update feedback indicators (like LEDs). Optionally toggle between two different commands per pushbutton. Tap the button once to activate a scene - and light the LED indicator. Tap it again to deactivate the scene - and extinguish the LED indicator. The KPCW-6 is a wire-in wall mounted device. Installation is simple - just mount in a wall box and connect to line and neutral. Minimize

The KPCW-8 is perfect for controlling all UPB-compatible lo ... Read more

The KPCW-8 is perfect for controlling all UPB-compatible load control devices such as the PulseWorx Wall Switch Dimmers, Fixture Modules, Lamp Modules, Appliance Modules, Output Modules, etc. The KPCW-8 has eight blue backlit horizontal pushbuttons that can be custom engraved (for a nominal charge) for ease of use and to add beauty and functionality to any room. The backlit pushbuttons illuminate when pressed or when a button or load they are tracking is activated. Select from 16 commands to be transmitted when each pushbutton is tapped, double-tapped, held or released. This allows the KPC to remotely control other UPB-compatible devices and/or update feedback indicators (like LEDs). Optionally toggle between two different commands per pushbutton. Tap the button once to activate a scene - and light the LED indicator. Tap it again to deactivate the scene - and extinguish the LED indicator. The KPCW-8 is a wire-in wall mounted device. Installation is simple - just mount in a wall box and connect to line and neutral. Minimize

HX-80N - Extremely Stable High Mount Outdoor Curtain PIR. T ... Read more

HX-80N - Extremely Stable High Mount Outdoor Curtain PIR. The new HX-80N from Optex is an 80' x 6', high mount outdoor passive infrared detector that provides the stability and reliability necessary for an outdoor PIR sensor. The most important element in reliable outdoor detector is accuracy to distinguish a human from a small animal. The exclusive pyro element on board enables the HX to project an ideal detection pattern, thus allowing for more accurate detection of humans and less false alarms. In addition, the HX-80N's dual PIR's and 20 detection zones utilize the 'AND' detection pattern technology - upper and lower detection areas have to be activated in order to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The HX Series' detection length can be limited to avoid unwanted detection, and it's short range zones can be masked if needed. By limiting the detection range, false alarms due to unwanted movement (cars, persons or animals outside the protected area) can be eliminated. HX-80NAM - Includes Digital Anti-Masking. The HX-80NAM includes all the great features of the HX-80N but comes with a Digital Anti-Masking feature. When an object is placed close to the lens surface for a period of more than 180 seconds, the IR Anti-Masking circuit will activate and generate a trouble signal. Minimize

The Rokonet Lunar Industrial High Ceiling Mount Motion Sens ... Read more

The Rokonet Lunar Industrial High Ceiling Mount Motion Sensor is a dual technology detector with a mounting height of up to 28 ft(8.6m) that incorporates RISCO Group's Anti-Cloak(TM) Technology (ACT(TM)). The detector has an Intelligent Digital Signal Processing method that automatically adjusts the alarm threshold and pulse count verification according to actual intruder crossing speed and environmental factors, providing superior detection and false alarm immunity. Minimize

The PMCH8 housing has been designed and engineered for Pana ... Read more

The PMCH8 housing has been designed and engineered for Panasonic's standard body 1/3 cameras with Panasonic Fixed Focal Lens Series. The housing accommodates standard body fixed camera up to 8" in length. Minimize

Surface mount - fits on door mullion Backlit hardened key ... Read more

Surface mount - fits on door mullion Backlit hardened keys Sounder Door bell relay Indoor/outdoor use Operating Voltage: 12/24 volts AC/DC - Auto-adjusting Available in Bronze BZ or Aluminum AL finishes Minimize

Dome Camera, Wall Mount, Height 6 19/32 In, Width 5 5/16 In ... Read more

Dome Camera, Wall Mount, Height 6 19/32 In, Width 5 5/16 In, Depth 7 27/32 In, Aluminum Body Material, For Use With 2ajw8, 2ajw9, 2ajx1, 2ajx2 Minimize