> Security Systems and Surveillance > buy a telephone/store north shore commercial door

•Provides wired communication and secure access control at ... Read more

•Provides wired communication and secure access control at the gate or door •Tamper-resistant poly enclosure •Delivers complete independent wireless control of two entrances when paired with LiftMaster® Door or Gate Access Systems, or a LiftMaster Security+® receiver •Allows the homeowner or small business to greet visitors, grant or deny access, or activate several system modes, all from a touch-tone phone •Security+® Rolling Code Technology allows secure wireless control of any 2 LiftMaster door or gate operators •Call button •Digital voice quality •Distinctive ringing •Call waiting •Call forwarding •Remote open •"Party" mode •"Vacation" mode •"Intercom" mode •Do not disturb •Custom caller ID •Up to 200 4-digit entry codes can be set as permanent or one-time-use-only •Auto-sensor input •Flexible dual control feature •Bell REN standard: 3.0 •1-year warranty Minimize

•Contemporary styling •Cast housing; nickel finish •Dow ... Read more

•Contemporary styling •Cast housing; nickel finish •Downlighting •Voice prompts, user friendly, owner friendly •Two programmable outputs control two openings •Obstacle reverse, alarm shunt •Optional low light CCTV camera kit (Model RE-BWC1) •Provisions for knox box •Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem •450 event memory log •Supports 100 entry codes •Supports 100 block-coded transmitters •Applications include single residence, commercial sites, employee parking •Built-in superheterodyne radio receiver •MegaCode format •Operating frequency: 318 MHz •Backup battery ready •6.45” W x 10.81” H x 3.74” D Minimize

The Model MGT Gate Safety Edge Transmitter is for adding fu ... Read more

The Model MGT Gate Safety Edge Transmitter is for adding fully supervised obstacle sensing for motorized gates, doors or barrier arms in a Linear access control system. The transmitter mounts directly on the gate, door, or barrier and wires to a standard exterior safety edge sensor (for full featured compatibility, a Miller gate edge sensor with an optional .001 uF capacitor is recommended). If an object is hit during the gate closing, the sensor will present a closed circuit across the connecting wires and the MGT will transmit a message to the access controller to reverse the movement of the gate. The MGT is compatible with AE-500, AE1000Plus, AE2000Plus, and AP-5 commercial telephone entry and access controllers. It is also compatible with RE-1 and RE-2 residential telephone entry systems. The MGT is the industry’s only fully supervised gate safety edge transmitter. It automatically sends an hourly status report to the access controller, indicating battery condition and if the transmitter is operational. Should the edge sensor be disconnected, shorted, or tampered with, the MGT will report a trouble condition. The MGT transmitter is supplied in a weather-resistant, fiberglass box. Its circuit board is coated to prevent moisture damage. The enclosure mounts to the gate, door, or barrier arm through sealed interior mounting screws Features Safety edge transmitter Activates one MegaCode receiver for stop or reverse safety edge No cables or coiled wires Mounting hardware (4 screws) supplied Power: 2 Model 2450 lithium batteries Visor clip included Two type 2032 lithium batteries supplied MegaCode format RF Frequency: 318 MHz 4" W x 4.28" H x 2.2" D Order number: DNT00068 Minimize

The state-of-the-art DB200 is the only doorbell signaler th ... Read more

The state-of-the-art DB200 is the only doorbell signaler that requires no wires and can be installed in seconds. Unlike competing models, the DB200 is not triggered by sound, so annoying false alarms are a thing of the past. Other advanced features include: selectable number of flashes (5 or 10), different flash code for front and rear doors and a built-in chime for hearing members of the family (can be turned off). The DB200 has a built-in outlet to flash an attached lamp and each sends a signal to all Sonic Alert remote receivers. The DB200 has the additional feature of being a telephone signaler. Just plug the phone cord into a modular telephone jack. Its low equivalent number does not draw any phone line power. Minimize

The Phone Gate 102-1010K is a unique telephone entry system ... Read more

The Phone Gate 102-1010K is a unique telephone entry system that interfaces with your existing home or office telephone including cordless, enabling you to answer calls and open two entrances, either door or gate. This set includes a telephone adapter, PAL102, two PWK1010 Door phone with Access Control keypads, and a transformer. Phone Gate 102-1010K provides you with many benefits unlike any other access control system. Whether you run a home office or live in a larger home, you can control access to your main entrance via your telephone. So, while in a meeting or laying out by the pool, screen visitors by phone and either allow them entrance with one simple press of a button or let them know you will meet them at the door or gate. A call from door/gate number 2 is recognized by 2 distinctive beeps. Minimize

The Model 535T 3-Button, 27-Door, Open-Close-Stop, Stationa ... Read more

The Model 535T 3-Button, 27-Door, Open-Close-Stop, Stationary Transmitter is designed for commercial automatic door and gate operator applications. This transmitter can operate multiple receivers connected to multiple operators. The transmitter has three buttons for Open, Close, and Stop commercial operator functions and two rotary switches to select which receiver/operator to control. The three operation pushbuttons have a surrounding bezel to shield them from accidental activation. The Stop button is colored red for easy identification. Up to 27 3-channel commercial door or gate receivers can be independently controlled by the 535T transmitter. The Model 535T is compatible with 831R, 831RJ, MVP-3CH-24V-3T-4W, MVP-3CH-12V-8W-FC, MVP-3CH-24V-8W-FC, MVP-RE-24V-8W-FC, and MVP-MR 3-Channel receivers used in Open, Close, Stop applications. Features •Compatible 3-channel Allstar and MVP receivers •Stationary mounting •Powered by 9-volt battery •Easy access to battery and coding switch •8-position trinary coding switch •RF frequency: 318 MHz •3.625" W x 6.625" H x 2.375" D •Order number: 190-107475 Same as part number 53-S Minimize

The state-of-the-art DB200 is the only doorbell signaler th ... Read more

The state-of-the-art DB200 is the only doorbell signaler that requires no wires and can be installed in seconds. Unlike competing models, the DB200 is not triggered by sound, so annoying false alarms are a thing of the past. Other advanced features include: selectable number of flashes (5 or 10), different flash code for front and rear doors and a built-in chime for hearing members of the family (can be turned off). The DB200 has a built-in outlet to flash an attached lamp and each sends a signal to all Sonic Alert remote receivers. The DB200 has the additional feature of being a telephone signaler. Just plug the phone cord into a modular telephone jack. Its low equivalent number does not draw any phone line power. Features: Works in homes with all doorbell systems Built-in outlet to flash lamp Telephone signaler option Wireless installation Sends signal to remote receivers Different flash codes Built-in chime Selectable number of flashes U.L. Listed Top quality - Five year warranty Minimize

The Phone Gate 101-1000M is a unique door entry system that ... Read more

The Phone Gate 101-1000M is a unique door entry system that interfaces with your existing home or office telephone (even cordless), enabling you to answer and open the door or gate. This complete package includes telephone adapter PAL101 , Anti-Vandal Rugged Heavy Metal Door Phone model PWM1000 and a transformer . Key Features: Activates Electric Strikes, Deadbolt Locks, Magnetic Locks or motors of One Door or Gate and communicates with one Door Phones Integrates with any existing home telephon Minimize

MODEL CPS Commercial Protector System Emitter-Rec ... Read more

MODEL CPS Commercial Protector System Emitter-Receiver Type Photo-Electric Control Commercial Protector System provides protection on doors up to 30 feet wide. Contains emitter, receiver, mounting brackets, and operator interface. 24VAC, use CPS II™ if Solid State Logic Control Board unit. OPEN only (all LiftMaster operators) after vehicle passes through infrared beam. Signal beam is projected across vehicle path and, when broken, sends a signal to open the door. Minimize

The Model 639T 3-Button, 9-Door, Open-Close-Stop, Stationar ... Read more

The Model 639T 3-Button, 9-Door, Open-Close-Stop, Stationary Transmitter is designed for commercial automatic door and gate operator applications. This transmitter can operate multiple receivers connected to multiple operators. The transmitter has three buttons for Open, Close, and Stop commercial operator functions and a rotary switch to select which receiver/operator to control. The three operation pushbuttons have a surrounding bezel to shield them from accidental activation. The Stop button is colored red for easy identification. Up to nine 3-channel commercial door or gate receivers can be independently controlled by the 639T transmitter. The Model 639T is compatible with 831R, 831RJ, MVP-3CH-24V-3T-4W, MVP-3CH-12V-8W-FC, MVP-3CH-24V-8W-FC, MVP-RE-24V-8W-FC, and MVP-MR 3-Channel receivers used in Open, Close, Stop applications. Features •Compatible 3-channel Allstar and MVP receivers •Stationary mounting •Powered by 9-volt battery •Easy access to battery and coding switch •8-position trinary coding switch •RF frequency: 318 MHz •3.625" W x 6.625" H x 2.375" D •Order number: 190-107476 Minimize

The Phone Gate 101-1010K is a unique door/gate entry system ... Read more

The Phone Gate 101-1010K is a unique door/gate entry system that interfaces with your existing home or office telephone including cordless, enabling you to answer calls from the door/gate and open the door or gate by a key stroke on the phone. This complete set includes telephone adapter PAL101, Multi mode Door Phone with an Access Control Keypad model PWK1010 and an AC Power Transformer. The Door phone has an Access Control Keypad, with up to 55 programmable codes for entry from the outside of authorized people. Minimize