> Musical Instruments > Live Performance Equipment and Accessories > Crossovers

Crown's XLS 2500 is a premiere, portable power amplifier wi ... Read more

Crown's XLS 2500 is a premiere, portable power amplifier with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. This high-performance power amp provides enormous power and flexibility thanks to the integrated DriveCore Technology, PureBand Crossover System and Peakx limiters. Weighing less than 11 pounds, the Crown XLS2500 power amp is much easier to set up and move from show to show. Integrated DriveCore Technology Class D amplifiers are notable for extraordinarily high efficiency and being well suited for driving difficult reactive loads such as subwoofers. However, their performance can suffer impaired performance on marginal and unstable AC line supplies. To overcome this obstacle, Crown engineers developed DriveCore Technologya proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Cl Minimize

Dual 18in Subwoofer Speaker System Power HandlingPeak: 3200 ... Read more

Dual 18in Subwoofer Speaker System Power HandlingPeak: 3200 WattsRms: 1600 Watts2 X 18in Subwoofers6in X 18in Super Horn Midrange/tweeter1-3/4in Titanium Compression Tweeter3in Kapton Voice CoilDurable Ported Mdf EnclosureBuilt-in Crossover NetworkBanana Plug And Binding Post TerminalsDual 1/4in And Speakon Jacks100 Oz Woofer Magnet24 Oz Tweeter MagnetFrequency Response: 25-20,000 HzImpedance: 8 OhmSensitivity: 110 DbDimensions: 18-7/16ind X 21-13/16inw X 50-13/16inhAuthorized Internet Dealer1-year Manufacturer's Warranty Minimize

XTi 4002 Power Amplifier Specifications: Minimum Guaranteed ... Read more

XTi 4002 Power Amplifier Specifications: Minimum Guaranteed Power, (1 kHz Per channel, both channels driven) Stereo, 2 ohms (per ch.): 1600W Stereo, 4 ohms (per ch.): 1200W Stereo, 8 ohms (per ch.): 650W Bridge-Mono, 8 ohms: 2400W Bridge-Mono, 4 ohms: 3200W Integrated Processing Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters: Highpass and Lowpass per chann Minimize

Extremely powerful, efficient and accurate 2-way PA cabinet ... Read more

Extremely powerful, efficient and accurate 2-way PA cabinets, the SX100+E, SX300 and SX500+ deliver more output than you ever thought possible from cabinets of their size. EV's breakthrough Ring-Mode Decoupling produces ultra-clear performance by reducing unwanted resonance within the cabinet, making even slight tonal variations easy to distinguish. To produce their high SPL ratings (like 126dB continuous, 132dB peak on the SX500+), the cabinets feature cast-frame woofers with 14 lb. magnets, and large-mouth horns molded into the enclosures that carefully direct all that power into the room, and not at the wall. Specs include 60-20,000Hz frequency response. The SX500+ was recently upgraded to include a DH2t HF driver with a 2" voice coil. This results in a smoother response in the crossover region, better high-end response, lower distortion between 1kHz and 8kHz. These unique cabinets are made of molded polypropylene structural foam that's incredibly strong for its relatively light weight. The cabinets provide a built-in stand adapter as well as threaded inserts for permanent installations. The SX100+E handles 200 watts of continuous power (800 watts peak). The SX300 handles 300 watts (1,200W peak) and the SX500+ handles 400 (1,600W peak). Minimize

Brand New Crest Audio CPX Series CPX-2600 1550 Watt Profess ... Read more

Brand New Crest Audio CPX Series CPX-2600 1550 Watt Professional Power Amplifier Features: Crest Audio's patented GCLTM Gain Comparator Limiting System for maximum output without audible distortion Two-speed demand-sensitive fan and Turbo Cooling heat dissipator design Detented gain controls Power, GCL and Signal Present LEDs on each channel Built-in 150Hz/18dB/octave Subwoofer Crossover with 1/4" TRS output Current in-rush limiter Over-heat, short circuit, clip limiting, faulty load and DC circuits protect your valuable sound reinforcement speakers and the CPX amplifier Barrier strip, balanced XLR and 1/4" TRS inputs with signal pass-through Neutrik® Speakon® and 5-way binding post outputs Separate bridged outputs featuring NeutrikÆ SpeakonÆ connector and resessed mode switch Rear-panel GCL defeat switch Rear rack supports 14-gauge steel chassis Mil-spec fiberglass circuit boards Massive toroid transformer and storage capa 8-Ohm Bridged -1550 w/channel 4-Ohm Stereo -750 w/channel 8-Ohm Stereo -500 w/channel Minimize

IT12000HD High Definition Power Amplifier w/ DSP New I-Tech ... Read more

IT12000HD High Definition Power Amplifier w/ DSP New I-Tech HD features a new user-inspired DSP engine co-developed with BSS called OMNIDRIVEHD. The new processing engine features Linear Phase FIR filters that offer unrivaled crossover performance for sonically pure tunings. The OMNIDRIVEHD processing engine also features an innovative new suite of limiters called LevelMAX. Harman HiQnet System Architect mirrors the typical browser navigation interface to provide tour sound and contracting professionals with a familiar interface to access a host of power configuration and control functions. Performance Specifications Frequency Response: (at 1 watt, 20 Hz - 20 kHz): ±0.25dB. Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 112 dB. Total Harmonic Distortion (THD) at full rated power: < 0.1%. Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to 35 dB: < 0.2%. Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000. Crosstalk (below rated power, 20 Hz to 1 kHz): Minimize

MSRP: $699.99 Peavey Power Amplifier The PV IPR DSP 1600 bo ... Read more

MSRP: $699.99 Peavey Power Amplifier The PV IPR DSP 1600 boasts 900 watts RMS per channel at 2 ohms and is under 7lbs. The IPR DSP features independent, assignable crossover points, delay, EQ presets, security lock settings and a intuitive setup wizard. Combined with a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary new IPR class D topology. Features: 1050W RMS x 1 at 2 ohms 570W RMS x 1 at 4 ohms 300W RMS x 1 at 8 ohms 900W RMS x 2 at 2 ohms 515W RMS x 2 at 4 ohms 290W RMS x 2 at 8 ohms DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Combination 1/4" or 1/4" 4 pole twist lock output connector Light weight Individual signal pass-thru 1/4" jacks on each channel LED illuminated DSP-based Loudspeaker Management System 120 ms of delay per channel 4 bands of parametric equalization per channel Security lock MAXX Bass® Horn EQ each channel Minimize