> Musical Instruments > djtronix com > Studio Equipment and Accessories

Underpinning the drama and scintillating musical vitality o ... Read more

Underpinning the drama and scintillating musical vitality of a Platinum multichannel speaker system is the PLW-15 a range matching sub-bass engine endowed with all the quality virtuosity and excellence that defines the marque. Capable of releasing the deepest frequencies recorded on disc the PLW-15 will drive performances of music and film with an utterly breathtaking authority. Its 15” (381mm) long-throw C-CAM driver is triple suspended in a rigid die-cast alloy chassis. A massive double-stack magnet motor system with a 4” (101.6mm) voice coil provides the ultimate linearity and control required to reproduce the clean seismic 16Hz tones that you feel more than you hear. Powered by the staggering continuous force of 1000 watts from the onboard Class D amplifier the driver has the speed and integrity to complement the performance of its range counterparts creating the foundation for a seamless wideband sound field rich in natural dynamism texture and tonality. With the convenience of remote control the PLW-15’s subterranean potency can be fine-tuned to the loudspeaker system using sophisticated digital filters and to room acoustics with a range of advanced DSP adjustments including a ten band parametric EQ and no fewer than four preset EQ positions. Its response can be optimised to meet the specific demands of music and film sound through individual input settings. The PLW-15’s talent for room-matching is also expressed by the lustre of its beautifully compact curvaceous cabinet resplendent in a choice of Platinum veneers and radially braced and damped to enhance structural integrity. Blending power and finesse with superb aesthetics the PLW-15 introduces a sensational new dimension to the experience of sound in the home which celebrates the raw energy and compelling quality of genuinely deep bass. Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5 10 15 20 25 & 30 Variable Phase Control: 0. 45. 90 135 180 225 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Compliment:1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input +12Vdc = On State - Please add $500.00 for new as this price is for OPEN BOX. The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold per pair. The amazing Monitor Audio’s flagship Platinu ... Read more

Sold per pair. The amazing Monitor Audio’s flagship Platinum range of speaker is a compact version of the universally acclaimed PL300 loudspeaker it is designed for an even broader range of environments. In a skilful re-sizing of the PL300 (the PL200 occupies approximately 1/3 the volume of the PL300) Monitor Audio’s engineers have taken great care to preserve all the sonic virtues and design excellence of the larger speaker. By utilising a re-scaled 6.5” version of the Platinum 8” bass driver and by re-configuring the Platinum mid-range Tapered Line Enclosure (TLE) to align co-axially with the PL200’s HiVe®II bass reflex port they have endowed the smaller PL200 with the spiritual essence of its universally admired range-mate. Just how successful Dean Hartley and his team have been in this endeavour can be measured by the near parity of PL200 and PL300 performance specifications despite the new design’s significant re-scaling. For all the practical advantages conferred by the smaller enclosure the PL200 surrenders only a little bass extension to the PL300 and cannot quite match SPL and power handling. In other performance parameters the PL200 and PL300 are comparable proving that within the new PL200 design there is little compromise. Standing at just under a metre in height (99.8cm x 25.5cm W x 28.5cm D) the compact three-way PL200 speaker features dual 6.5” RDT bass drivers a single 4” RDT mid-range driver and Monitor Audio’s proprietary and superlative Platinum C-CAM® ribbon transducer. As with other platinum speakers the PL200’s innovatively shaped and braced cabinet is finished in a choice of exotic lacquered Santos Rosewood and Ebony natural wood veneers and in a rich piano black lacquer. The front baffle is upholstered in high quality leather. Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance:4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Twin Ported HiVe® technology / Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Compliment: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 255 x 285 mm (39 x 10 x 11 1/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Setting up a home studio can be both daunting and expensive ... Read more

Setting up a home studio can be both daunting and expensive. That's why we created the zZounds Producer's hardware package -- we've picked out everything you need to get started, and added on a huge discount on top of it. All you'll need to do is add your own computer and software. Minimize

Twelve years ago the first-generation Kaoss Pad revolutioni ... Read more

Twelve years ago the first-generation Kaoss Pad revolutionized the DJ/music scene with touchpad-based effect control. Since then X-Y touchpad is evident in many Korg products - Kaoss Pad effects the Kaossilator Series our padKONTROL and nanoPAD controllers even the exclusive M3 TouchView display.To this we add the Kaoss Pad Quad with new effects functions and features that truly stand out from the crowd.New Kaoss quad pad allows you to create your own combination of Kaoss effects and simultaneously control up to four effects using a single fingertip with the new Kaoss Pad Quad; it's Kaoss control evolved to a whole new level.This new Kaoss Pad lets you use up to four effects simultaneously these effects can be sync'ed to the beat of your music allowing you to transform songs in realtime.Any audio source can be processed from MP3 players a mixing board an instrument even vocals via the mic input.The expressive performance potential that arises from the Kaoss Pad Quad leaves other effect units in the dust and rapidly approaches the realm of an "instrument".The brilliant and colorful LED touchpad illumination adds a strong sense of individuality further enhancing the Kaoss Pad Quad's unique character.Intense user and performers can engage in highly technical performances whereas casual users can enjoy DJ-like fun.The interest and depth emanating from the new Kaoss Pad Quad is sure to touch every listener. Minimize

The LSR2328P Bi-Amplified Studio Monitor is equipped for a ... Read more

The LSR2328P Bi-Amplified Studio Monitor is equipped for a wide range of applications. The LSR2328P includes a long-excursion 8 woofer and 1 silk substrate dome tweeter and 165 watts of amplification. Balanced XLR, balanced 1/4 TRS, and RCA unbalanced input connectors allow connection of mixing consoles, computer audio interfaces, audio visual equipment, and home audio systems. A detented level control allows fine adjustment of speaker volume. Low and high frequency trim controls let you tailor the speaker's response to preference or room acoustics. A neoprene rubber pad on the bottom of the speaker provides acoustic isolation and increases stability when the speaker is placed on a speaker stand or a console top. Mounting points are included and the enclosure has been reinforced for safe mounting using industry-standard mounting hardware. Rather than using a single on-axis measurement of the speaker's performance, JBL's LSR design criteria requires seventy measurements yielding more than 1,200 times the data, enabling JBL to engineer a speaker that sounds right and is accurate in any room. A trademark of LSR Design is the custom tweeter waveguide that delivers superior imaging and smoother frequency response to your listening position. Today's production styles require a monitor system capable of extended low frequency performance. To address this, the LSR2328P uses a new long-excursion 8 woofer with a high-flux motor. A custom-tuned port works in concert with the woofer to produce deep and accurate low frequency response to 37Hz. The LSR2328P produces exceptional sound pressure level (SPL) through JBL-engineered high-sensitivity transducers, high-output amplifiers and careful attention paid to the thermal properties of the system. To ensure years of reliable performance, before becoming a production-ready design, the LSR2328P survives the JBL Power Test in which the speaker must play continuously at full output for 100 hours without failure.   Product Feat... Minimize

20 Watt Classroom Audio System Dome receiver 4 Speakers 50 ... Read more

20 Watt Classroom Audio System Dome receiver 4 Speakers 50 ft Cable Front of Amplifier Teacher microphone volume control - Adjusts volume of teacher infrared microphone Line input volume control - Adjust the level of Line/Auxillary input sources connected to input terminals on the back of amplifier IR Signal Indicater - Illuminated whenever the teacher mic is turned on and successfully recieved Feedback Blocker Indicator - Illuminated whenever the Feedback Blocker is activated Back of Amplifier Sensor Input Terminal - Up to 7 sensors can be connected via F-Connector and coaxial cable for sensors Auxiliary Inputs - Inputs allow other media sources such as DVD,TV,CD, and MP3 player to be connected to RA101 amplifier Feedback Blocker - Turns Feedback Blocker feature on and off Speaker Outputs - Smplifier allows up to 4 Speakers to be connected Minimize

Sold Individually.... High-Definition 6-1/2 inch bass/midra ... Read more

Sold Individually.... High-Definition 6-1/2 inch bass/midrange driver with cast Magnesium basket Annealed Pure Aluminum 1 inch dome tweeter Pressure coupled 10 inch Low Bass radiator for outstanding bass response High gloss black lacquer end caps Available only as a matched pair Dimensions | Metric :8-3/8” W x 11-7/16” D x 13” H | 21.3 x 29.1 x 33.0 cm Driver Complement :One 1" pure aluminum dome tweeter; One 6-1/2" high definition bass/midrange driver pressure coupled to one 10” bass radiator Frequency Response :24 Hz – 30 kHz Impedance :Compatible with 8 Ohms outputs Sensitivity :90 dB Recommended Associated Amplifier Power :20 – 225 watts A/V Receiver Crossover Setting :50 Hz Inputs :One pair of 5 way binding posts Available Finishes :Piano-Gloss Black Included Accessories :Keyhole bracket (with 2 screws to mount to speaker) Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting Minimize

The V-4 is a 4-channel Video Mixer made for portable or fix ... Read more

The V-4 is a 4-channel Video Mixer made for portable or fixed installation use. It is ideal for use in nightclubs, places of worship, theatres, and other live performances. The compact design of the V-4 gives you the freedom to make your video sources come alive. The input video sources are processed completely in the digital domain, and give professional video quality (13.5MHz, 8-bit, 4:2:2, DV quality). Ideal for use on large screens, and because the V-4 internal processing is digital there is no quality loss. V-4 is equipped with four composite (RCA Pin) inputs plus two S-video (Y/C) inputs. V-4 offers scene transition of the four video sources with Dissolve, Wipes (with a total of about 200 variations), and Switching. The V-4 outputs the same video source to all the three jacks (Composite x 2, S-video x 1), for simultaneous monitoring and displaying, without resorting to external distribution boxes. For cutting-edge Multimedia artists, the V-4 offers V-LINK, an exciting new feature from Edirol and Roland that provides for realtime performance control over digital video, for the ultimate in creative expression. The V-4 video mixer also has MIDI in/out/through, for real-time or sequenced control of video sources with effects and transitions. Features: Video Mixer / Switcher with 4ch input Independent 2-channel TBC / Frame Synchronizer Independent 2-channel Digital Effects Professional quality T-Bar Video Fader Easy Operation Beat Synchronization between Audio and Video Over 200 Transition Effects Minimize

The SRX712M was designed with one goal - build the lightest ... Read more

The SRX712M was designed with one goal - build the lightest, smallest, loudest, clearest stage monitor possible while delivering a strikingly professional appearance. The SRX712M uses a 12-inch Differential Drive woofer and a 3-inch (voice coil diameter) compression driver that handles 800 watts (continuous) power in a 12-inch high profile. A 90 degree x 50 degree horn provides smooth, even coverage regardless of the position of the performer. Minimize

This book walks fledgling studio artists through the equipm ... Read more

This book walks fledgling studio artists through the equipment and steps needed to create quality audio recordings in a home studio. Covers both standalone equipment like studio-in-a-box devices, traditional recording hardware (sound boards, etc.), and simple PC set-ups. Also goes beyond many competitors by covering items like microphones and sound processors, explaining the methods for getting a quality recording, and mixing, mastering, and distributing the final product. The home recording market is constantly evolving with new tools and new techniques. The Second Edition of this book updates its equipment listings to cover the latest recording hardware available. It also refocuses more on the home recording hobbyist who is on a budget by covering more lower-priced items. Finally, it includes more product shots and recommended set-ups to help readers get started quickly. Minimize

The Mix Back is a flexible and affordable 16 x 12 x 2 x 2 m ... Read more

The Mix Back is a flexible and affordable 16 x 12 x 2 x 2 monitor mixer that features two stereo outputs and twelve mono outputs. There are sixteen high quality Mic/Line inputs with passive split. It also features two HearBus outputs and two ADAT optical outputs. A perfect companion to our Hear Back personal monitor system. A talkback mic preamp permits talking to any mono output, master outputs and the intercom output. Minimize

Sold Individually... 3” MMP®II. The Metal Matrix Polymer dr ... Read more

Sold Individually... 3” MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 3/4" gold C-CAM® tweeter rear-firing to enhance sound dispersion characteristics and providing extension to in excess of 35 KHz. Ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. Single through-bolt driver fixing. Provides mechanical de-coupling properties resulting in enhanced mid-band clarity and resolution. Through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Internal PTC auto-reset protection circuit to prevent over-driving. Magnetically shielded drivers for safe use near sensitive microprocessor equipment or plasma/LCD displays. Rigid MDF construction throughout. Smooth radius edges – reduces diffraction effects and gives better imaging properties. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Frequency Response: 120 Hz - 20 KHz Sensitivity (1W@1m): 87 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS):25 W System Power Handling (RMS): 50 W Recommended Amplifier Requirements: 5 - 50 W Maximum SPL (dBA): 101 Bass Alignment: Sealed cabinet Drive Unit Complement: 1 x 75mm (3") MMP®II cone mid-bass driver. 1 x 20mm (3/4") C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 100 x 100 x 100 mm (3 15/16 x 3 15/16 x 3 15/16) Weight (each): Kg (lbs) 0.95 (2 1/8) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold Individually... 4" MMP®II. The Metal Matrix Polymer dr ... Read more

Sold Individually... 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 1" Gold C-CAM® tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays. High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses. Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance. ARC® front baffle (Anti-Resonance Composite). Originally developed for our high-end Platinum series ARC is a cast thermo-set polymer loaded with minerals to provide very inert optimally damped components. It is ideal for high-end acoustic applications where a high degree of structural rigidity and vibration damping is required. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Front firing port. Internal PTC auto-reset protection circuit to prevent over-driving. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Frequency Response: 60 Hz - 35 KHz Sensitivity (1W@1m): 87 dB Nominal Impedance:8 Ohms Power Handling Single (RMS):60 W System Power Handling (RMS): 100 W Recommended Amplifier Requirements: 10 - 100 W Maximum SPL (dBA): 105 Bass Alignment: Bass reflex - rear ported Drive Unit Complement: 1 x 100mm (4") MMP®II cone mid-bass driver. 1 x 25mm (1") C-CAM® gold dome tweeter External Dimensions (H x W x D): (inches) 350 x 125 x 105 mm (13 3/4 x 4 15/16 x 4 1/8) Weight (each): Kg (lbs) 2.8 (6 1/8) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

The LSR2328P Bi-Amplified Studio Monitor is equipped for a ... Read more

The LSR2328P Bi-Amplified Studio Monitor is equipped for a wide range of applications. The LSR2328P includes a long-excursion 8 woofer and 1 silk substrate dome tweeter and 165 watts of amplification. Balanced XLR, balanced 1/4 TRS, and RCA unbalanced input connectors allow connection of mixing consoles, computer audio interfaces, audio visual equipment, and home audio systems. A detented level control allows fine adjustment of speaker volume. Low and high frequency trim controls let you tailor the speaker's response to preference or room acoustics. A neoprene rubber pad on the bottom of the speaker provides acoustic isolation and increases stability when the speaker is placed on a speaker stand or a console top. Mounting points are included and the enclosure has been reinforced for safe mounting using industry-standard mounting hardware. Rather than using a single on-axis measurement of the speaker's performance, JBL's LSR design criteria requires seventy measurements yielding more than 1,200 times the data, enabling JBL to engineer a speaker that sounds right and is accurate in any room. A trademark of LSR Design is the custom tweeter waveguide that delivers superior imaging and smoother frequency response to your listening position. Today's production styles require a monitor system capable of extended low frequency performance. To address this, the LSR2328P uses a new long-excursion 8 woofer with a high-flux motor. A custom-tuned port works in concert with the woofer to produce deep and accurate low frequency response to 37Hz. The LSR2328P produces exceptional sound pressure level (SPL) through JBL-engineered high-sensitivity transducers, high-output amplifiers and careful attention paid to the thermal properties of the system. To ensure years of reliable performance, before becoming a production-ready design, the LSR2328P survives the JBL Power Test in which the speaker must play continuously at full output for 100 hours without failure.   Product Feat... Minimize

Tascam continues to innovate home recording with the DP03 d ... Read more

Tascam continues to innovate home recording with the DP03 digital 8-track Portastudio. The compact song writing platform records up to two XLR microphone inputs at a time, or use built-in stereo condenser microphones to capture rehearsals and performances. The 8-track DP03 records to SD card media while you mix on user-friendly knobs and faders. When you've completed your song, transfer to a computer over USB or burn to a CD with the built-in drive. Tascam's DP03 digital Portastudio is the musician-friendly way to capture your musical inspiration. Minimize

The MSC1 Monitor System Controller includes essential "Moni ... Read more

The MSC1 Monitor System Controller includes essential "Monitor Strip" features found in large mixing consoles so you can take control of all monitoring functions from your place at the mix position. Since the acoustics of the room can play a big part in what you hear, the MSC1 includes JBL's highly acclaimed RMC Room Mode Correction Technology to tune your monitor system to the room. The end-result is a calibrated reference environment in which your speakers work in harmony with your room to take the guesswork out of mixing. Minimize

Top end monitor mix capability is now accessible to the bud ... Read more

Top end monitor mix capability is now accessible to the budget conscious sound provider. The popular GL Series has grown with the addition of the GL2800M, a dedicated monitor console offering an easy to use, innovative tool set for simultaneously mixing large numbers of wedges and in-ears. With the benefits of personal freedom, a tailored mix for each musician and a quiet stage, IEM monitor systems have become increasingly popular with performers and engineer's alike. Although IEM has become a lot more affordable, the console required to run them properly is typically too large, complex or expensive for all but the biggest budgets. Meet the GL2800M... affordable, capable and easy to use - without compromise, exactly right for the job. Minimize

Mackie MR5 and MR8 Studio Monitors deliver truly profession ... Read more

Mackie MR5 and MR8 Studio Monitors deliver truly professional quality and everything you need for critical monitoring at a price that s unbelievably affordable. Wide even dispersion means a broad sweet spot minimizing funny dips or peaks in frequency response when you move off axis. You get superior bass extension tight and free from distortion so your lows pack just the right amount of punch. And to ensure the best sound possible for your setup the MR Series monitors feature acoustic controls so you can tune them to fit your room Minimize