|
|
VoiceWorksPlus features an extensive effects list including
... Read more
VoiceWorksPlus features an extensive effects list including 4th generation TC-Helicon Harmony, Voice Modeling™, and the Transducer and μMod (micromod) blocks for distortion/megaphone and flange/detune effects. Also provides a high quality mic preamp, transparent pitch correction, and reverb, delay and dynamics algorithms from the classic VoiceWorks.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
The RTD800 features independent Overdrive and Distortion ci
... Read more
The RTD800 features independent Overdrive and Distortion circuits combined with a dual triode tube to offer a massive array of saturated tones, from traditional tube overdrive through full-on gated metal distortion. No other tube overdrive pedal offers this degree of versatility in a single package. The selectable Overdrive and Distortion modes are configured as follows: The Overdrive circuit features two stages of clipping - a bi-directional clipping diode in the feedback loop of the op-amp and then a single-diode in the second stage for asymmetrical clipping. The Distortion circuit also features two clipping stages, but configured differently - a bi-directional clipping diode in feedback of op-amp for stage 1, and then a 2nd stage with a passive bi-directional clipping circuit. Unlike other tube overdrive pedals, the RTD800 places the tube AFTER the OD/Distortion circuits, making it the best tube overdrive pedal to recreate an authentic tube-amp tone. Gain and Master Controls allow the user to dial the amount of distortion and output level. The three Tone controls are completely independent with no frequency overlap, allowing for an unprecedented degree of tonal options. Everything is kept clean and tight via the variable VCA Noise Reduction circuit, which features an LED status indicator and On/Off switch. In addition, the RTD800 features a Foot switchable Boost function that can be varied between 3-9 dB via an internal trim pot. Like all Maxon products, the RTD800 features True Mechanical Bypass switching using a 3PDT switch. The RTD800 comes complete with the Maxon AC2009 9-Volt power supply, an auto sensing digital power supply that can be used anywhere in the world. When you require an unparalleled variety of REAL-tube tones, only the Maxon RTD800 will do.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
|
from $173
(9 stores)
See Details
|
|
|
|
|
from $262
(1 store)
See Details
|
|
|
The Nova System is the complete, floor-based effects soluti
... Read more
The Nova System is the complete, floor-based effects solution for the dedicated guitar player who wants the ultimate combination of operational simplicity and audio superiority. The Nova System is an all-analog programmable distortion/overdrive section under preset and expression control that includes an arrray of effects taken straight from the king of floor-based processors; G-System: top-notch compression, EQ, noise gate, modulation, pitch, delay and reverb right at your feet.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
|
from $279
(9 stores)
See Details
|
|
|
The RTO700 Tube Overdrive Pedal has no clipping diodes in t
... Read more
The RTO700 Tube Overdrive Pedal has no clipping diodes in the signal path - All distortion comes directly from the dual triode preamp tube and hi-gain amp circuit. This design makes the RTO the best tube overdrive pedal for use with clean and semi-clean amps to effectively add a 2nd or 3rd channel of pure tube tone to your rig. Every aspect of the RTO700 has been re-thought and redesigned to provide a lifetime of trouble-free performance. As soon as power is applied to the pedal, an In-Rush Current control begins heating the tube at a very low voltage (much like a tube amp standby switch) to dramatically extend tube life. When the pedal is engaged, a charge pump circuit bumps incoming voltage to feed the tube with 12.6 VDC. Unlike other tube overdrive pedals, the RTD800 places the tube AFTER the OD/Distortion circuits, making it the best tube overdrive pedal to recreate an authentic tube-amp tone. Gain and Master Controls allow the user to dial the amount of distortion and output level. The three Tone controls are completely independent with no frequency overlap, allowing for an unprecedented degree of tonal options. Everything is kept clean and tight via the variable VCA Noise Reduction circuit, which features an LED status indicator and On/Off switch. The RTO700's Front-Panel Controls are as follows - GAIN - Controls Gain level. MASTER - Controls output level allowing user to match effect and bypass levels. BASS - Controls low frequency range. MID - Controls middle frequency range. TREBLE - Controls high frequency range. NR - Controls amount of Noise Reduction when NR is switched on. NR On/Off - Turns Noise Reduction on/off. Like all Maxon products, the RTO700 features True Mechanical Bypass switching using a 3PDT switch. The RTO700 comes complete with the Maxon AC2009 9-Volt power supply, an auto sensing digital power supply that can be used anywhere in the world. The Maxon RTO700 - When only REAL tube-tone will do.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
Propellerhead Balance withReason Essentials The music produ
... Read more
Propellerhead Balance withReason Essentials The music production package that has everything you need to create anything you want. 2-in 2-out audio interfaceSounds as good as it looks. Works as great as it feels. We've taken care of all the tedious stuff - calibration, setup, the works. You can concentrate on having fun instead: making music. With two channels of pristine audio recording, and with inputs for all your gear, your instruments are always connected and you are always ready to record.Integrated music recording environmentBalance is perfectly integrated with Reason and Reason Essentials. With Clip Safe you'll never lose a good take to distortion again. Big Meter lets you tune your guitar and set the levels from across the room. Use it with our software, other pro audio apps, or even iTunes - Balance works withReason EssentialsReason Essentials packs all the recording, editing, effects, instruments, and mixing tools you need to sound great. With its generous sound bank and familiar creative flow, it's the software that lets you focus on the music and finish that song. Upgrade to Reason for even more instruments, sounds, and effects.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
ToadWorks Fat City is a dual channel overdrive device. It c
... Read more
ToadWorks Fat City is a dual channel overdrive device. It consists of two completely separate and unique overdrive circuits, as well as a boost circuit, capable of increasing both the volume and the sustain. In addition, The clean boost is re-routable via a mini toggle switch located directly above the boost pot. This allows you to place the boost in front of, or after the overdrive circuits, and it's all True Bypass. Overdrive 1 is thick and complex, with a midrange control and plenty of gain on tap. Perfect for heavy lead and rhythm work, this overdrive begs you to get your rawk on. Overdrive 2 is smooth and warm, with a presence control and remarkably realistic breakup. Rock, R&B, Country - you name it, this does it. The real magic happens when both overdrives are combined to create the "Fat City" sound - the combined gain structures result in a heavy, yet surprisingly defined sound. Tight and punchy, yet warm and dynamic, the "Fat City" sound is the ultimate in analog overdrive. This may well be the last overdrive you ever buy. Welcome to Fat City.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
|
from $319
(4 stores)
See Details
|
|
|
|
|
from $393
(10 stores)
See Details
|
|
|
With the increased efforts of the analog design community t
... Read more
With the increased efforts of the analog design community to integrate analog high-frequency front-ends for telecommunications, there has been heightened interest in the behaviour of nonlinear circuits since this can cause considerable degradation of signals. In analog integrated circuits at lower frequencies, such as filters, nonlinear behaviour limits the dynamic range. Analog integrated circuit designers often lack insight into nonlinear circuit behaviour. Indeed, designers are trained to reason in linear or linearized circuits but not in nonlinear ones. Numerical circuit simulations of nonlinear circuit behavior do not provide enough insight to the designer. Distortion Analysis of Analog Integrated Circuits, with a foreword by Robert G. Meyer, provides both qualitative and quantitative insight into the nonlinear behavior of analog integrated circuits at low and high frequencies. General techniques to suppress nonlinear behavior such as pre-distortion, linear and nonlinear feedback are explained in detail and illustrated with realistic examples. In this way the book fills the gap between the theory of nonlinear systems and practical analog integrated circuits. Distortion Analysis of Analog Integrated Circuits provides the reader with an in-depth analysis of elementary transistor stages, both CMOS and bipolar, as well as an analysis of several larger circuits. Hereby use is made of advanced transistor models that are also discussed in the book. The analyses take into account many more effects than in existing publications, thanks to the use of a calculation method that yields closed-form expressions for nonlinear behavior. These expressions are interpreted and illustrated with realistic numerical examples. Distortion Analysis of Analog Integrated Circuits is essential reading for practicing analog and mixed-signal design engineers and researchers in the field. It is also suitable as a text for an advanced course on the subject. From the foreword: `I am sure that the analog circuit design community will [...] welcome this work by Dr. Wambacq and Prof. Sansen as a major contribution to the analog circuit design literature in the area of distortion analysis of electronic circuits. I am personally looking forward to having a copy readily available for reference when designing integrated circuits for communication systems.' Robert G. Meyer, Professor, Electrical Engineering and Computer Sciences, University of California, Berkeley.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
|
|
from $264
(10 stores)
See Details
|
|
|
|
|
from $1,050
(7 stores)
See Details
|
|
|
|
|
from $280
(5 stores)
See Details
|
|
|
|
|
from $599
(3 stores)
See Details
|
|
|
|
|
from $399
(6 stores)
See Details
|
|
|
|
|
from $200
(3 stores)
See Details
|
|
|
|
|
from $1,000
(7 stores)
See Details
|
|
|
|

(2)
|
from $19
(4 stores)
See Details
|
|
|
|

(2)
|
from $54
(11 stores)
See Details
|
|
|
|
|
from $23
(7 stores)
See Details
|
|
|
|
|
from $39
(2 stores)
See Details
|
|
|
|
|
from $64
(10 stores)
See Details
|
|
|
|
|
from $189
(8 stores)
See Details
|
|
|
|

(1)
|
from $9.99
(9 stores)
See Details
|
|
|
|

(1)
|
from $113
(12 stores)
See Details
|
|
|
|

(1)
|
from $65
(7 stores)
See Details
|
|
|
|

(1)
|
from $220
(8 stores)
See Details
|
|
|
|
|
from $82
(12 stores)
See Details
|