|
NEW FLUX WIRE MIG / MAG WELDER MACHINE 220 V MIG 135 G GAS
... Read more
NEW FLUX WIRE MIG / MAG WELDER MACHINE 220 V MIG 135 G GAS AND NO GAS SINGLE PHASE DIRECT CURRENT FAN COOLED THERMOSTATIC PROTECTION SUIT FOR FLUX GASLESS WELDING WIRE AND WITH GAS MIG, MAG WELDING WIRE INPUT VOLTAGE 220 VOLTS / 60 HZ . RATED OUTPUT 60 AMP 35% 17V. MAX OUTPUT 120 AMP 10% 20V. 34 VAC. DUTY CYCLE MAX OPEN CIRCUIT VOLTAGE: 20V WIRE CAPACITY: 0.023" OR 0.035" VARIABLE FEED SPEED CONTROL TORCH WITH FULL ON / OFF SAFETY CONTROL AUTOMATIC THERMAL SAFETY PROTECTION WITH WARNING LIGHT INCLUDED WELDING MASK,CHIPPING HAMMER/WIRE BRUSH, TORCH, TIP, GROUND CORD WITH CLAMP
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
FLUX WIRE WELDER MACHINE MIG 135G 220V and AUTO DARKENING S
... Read more
FLUX WIRE WELDER MACHINE MIG 135G 220V and AUTO DARKENING SKULL WELDING HELMET GAS AND NO GAS SINGLE PHASE DIRECT CURRENT FAN COOLED THERMOSTATIC PROTECTION SUIT FOR FLUX GASLESS WELDING WIRE AND WITH GAS MIG, MAG WELDING WIRE INPUT VOLTAGE 220 VOLTS / 60 HZ . RATED OUTPUT 60 AMP 35% 17V. MAX OUTPUT 120 AMP 10% 20V. 34 VAC. DUTY CYCLE MAX OPEN CIRCUIT VOLTAGE: 20V WIRE CAPACITY: 0.023" OR 0.035" VARIABLE FEED SPEED CONTROL TORCH WITH FULL ON / OFF SAFETY CONTROL AUTOMATIC THERMAL SAFETY PROTECTION WITH WARNING LIGHT INCLUDED WELDING MASK,CHIPPING HAMMER/WIRE BRUSH, TORCH, TIP, GROUND CORD WITH CLAMP COLOR MAY VARY AND Auto Darkening Mig Tig Mag Welding Grinding Helmet Welder Mask Flame Skull Adjust Sensitivity outside Helmet IN FULL CONFORMITY WITH CE AND ANSI SHADE NUMBER AND SENSITIVITY ADJUSTABLE CAN MAKE THE OPERATERS MORE CONVENIENT WHILE OPERATING RIGHT AND LEFT HANDER CAN SELECT THE SUITABLE STILE AUTO DARKENING LENS WILL AUTOMATICALLY DARKENS TO IT'S SELECTED SHADE NUMBER WHEN THE LIGHT FROM WELDER IS
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
FLUX WIRE WELDER MACHINE MIG 135G 220V and AUTO DARKENING S
... Read more
FLUX WIRE WELDER MACHINE MIG 135G 220V and AUTO DARKENING SKULL WELDING HELMET GAS AND NO GAS SINGLE PHASE DIRECT CURRENT FAN COOLED THERMOSTATIC PROTECTION SUIT FOR FLUX GASLESS WELDING WIRE AND WITH GAS MIG, MAG WELDING WIRE INPUT VOLTAGE 220 VOLTS / 60 HZ . RATED OUTPUT 60 AMP 35% 17V. MAX OUTPUT 120 AMP 10% 20V. 34 VAC. DUTY CYCLE MAX OPEN CIRCUIT VOLTAGE: 20V WIRE CAPACITY: 0.023" OR 0.035" VARIABLE FEED SPEED CONTROL TORCH WITH FULL ON / OFF SAFETY CONTROL AUTOMATIC THERMAL SAFETY PROTECTION WITH WARNING LIGHT INCLUDED WELDING MASK,CHIPPING HAMMER/WIRE BRUSH, TORCH, TIP, GROUND CORD WITH CLAMP Auto Darkening Mig Tig Mag Welding Grinding Helmet Welder Mask Flame Skull Adjust Sensitivity outside Helmet IN FULL CONFORMITY WITH CE AND ANSI SHADE NUMBER AND SENSITIVITY ADJUSTABLE CAN MAKE THE OPERATERS MORE CONVENIENT WHILE OPERATING RIGHT AND LEFT HANDER CAN SELECT THE SUITABLE STILE AUTO DARKENING LENS WILL AUTOMATICALLY DARKENS TO IT'S SELECTED SHADE NUMBER WHEN THE LIGHT FROM WELDER IS DETECTED SPECIFICA
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
The RWII Model #10000-CS is cabled primarily for battery op
... Read more
The RWII Model #10000-CS is cabled primarily for battery operation. This model will also connect to all CV (constant voltage) and DC (direct current) output machines. The #10000-CS has been designed at the suggestion of several US Naval officers who liked the Ready Welder very much, but because US Navy ships are all grounded, it could only be used on a Navy Vessel with a built-in Cold Switch. The ground cable is attached to the red dual quick disconnect connectors. This makes welding jobs in remote locations easy, portable and quick. This model will run off any or all: 18, 24 & 36 volt series depending on the application and material to be welded. When the trigger is released the guns in this model series go cold. The Model #10000-CS has a One year 100% parts and labor limited factory warranty. And it features the Cold Trigger Switch. With this feature, the Ready Welder, even when connected to a power source, will not light up an arc when the trigger is released. Without this, if the electrode wire is accidentally left protruding from a gun while still connected to a power source, and comes in contact with a metal which happens to be grounded, an arc would be struck, with possible dangerous results. Reportedly U.S. Navy ships are usually grounded, and it has expressed interest in the Model 10000-CS Features: *Welds Steel, Stainless and Aluminum or Any Metals Where Standard *One or Two Pound Spools are Available *Connects to Batteries - 18 Volt Battery can do Thin Sheet Metal - 24 Volt will Single Pass 1/2" @275 amp - 36 Volt will Weld up to 3/4" @350 to 400 amp *Welds 22 Gage to 3/4" *Connects to MIG/Constant Voltage Output Welders *Uses Wire Sizes from .023 to .045 without Changing Rollers *Uses Heavy-Duty TWECO Quality Front End Consumables *Wire Speeds of 50 Inches to 900 Inches per Minute *Polarity Indicator Lights *Ten Foot Cable with Quick Disconnects, Can be *Extended to 100 Feet *Built-in Gas Valve *Ground Cable Attached *Built in Cold Switch
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
The RWII Model #10250-CS is most frequesntly used by welder
... Read more
The RWII Model #10250-CS is most frequesntly used by welders and welding facilities wanting a MIG Spool Gun attachment to run off their Miller, Lincoln, Hobart, and Esab machines. This model is an excellent choice for welders that have engine drivers or those that weld aluminum in the shop connected to a MIG os Stock machine. The Model #10250-CS is a fraction of the cost of most other manufacturer's spool guns. Most of these machines already have a ground cable built into them, therefore no ground cable is supplied. The Model# 10250-CS can run off of batteries by the user supplying the ground cable and the series cable for the batterries. This model also includes our AC/DC Power Converter to supply 24VDC when hooked up to CC (Constant Current) stick welding machines. The Model #10250 has a Two year 100% parts and labor factory warranty. The Cold Switch was manufactured for the safety of different types of customers such as Navy, Army, Welding SHops, etc. With the Cold Switch, the RW-II will only create an arc when the trigger is pulled, allowing you to lay the welder down with no worries. Model 10250-CS Features: * Cabled as a spoolgun attachment for all DC output welders * Welds Steel, Stainless and Aluminum or Any Metals Where Standard * One or Two Pound Spools are Available * Connects to Batteries - 18 Volt Battery can do Thin Sheet Metal - 24 Volt will Single Pass 1/2" @220 amp - 36 Volt will Weld up to 3/4" @ up to 350 amp * Welds 22 Gage to 3/4" * Ground Cable not supplied * Connects to other MIG/Constant Voltage, Stick/Constant Current Welding Machines * Uses Wire Sizes from .023 to .045 without Changing Rollers * Uses Heavy-Duty TWECO Quality Front End Consumables * Wire Speeds of 50 Inches to 900 Inches per Minute * Polarity Indicator Lights * Twenty Foot Cable with Quick Disconnects, Can be * Extended to 100 Feet * Built-in Gas Valve
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
Description 3 NEW welding helmets. I know the photo only sh
... Read more
Description 3 NEW welding helmets. I know the photo only shows one, but the auction is for 3!! Flip front window for easy use!!!!!! Adjustable head band. This will make that welding job so much easier!!!!!! Thanks for looking!! Please be sure to check out our other auctions and online store for more great deals. Thanks!! Shipping Shipping is $0.00 for the lower 48 continental U.S.A. only. This item requires a physical address (no po box), and is only shipped to the lower 48 USA. Insurance is in
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
New Page 1 New 9 welding magnets. Three 75lb magnets / fron
... Read more
New Page 1 New 9 welding magnets. Three 75lb magnets / front arrow to back is 5" / side to side is 7" / middle hole is 1 3/4". Three 50 lb magnets/ front to back of the arrow is 4" / side to side is 6" / middle hole is 1 3/16". Three 25 lb magnets / front to back of the arrow is 3" / side to side is 4 1/2" / middle hole is 1 7/8". Perfect for holding during welding, soldering, assembly, marking-off, and more.
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
New Page 1 Description The auction is for 2 new adjustable
... Read more
New Page 1 Description The auction is for 2 new adjustable magnets. Ideal for welding and assembly applications. Swivel arms hold objects at almost any angle. Magnet swivels a full 360 degrees. Each magnet holds up to 50lbs. 2 1/2" x 3 3/8" ceramic magnets. The 3 photos above are for reference to show the great versatility of these magnets.
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
Search our eBay Store Titles Descriptions Store Categories
... Read more
Search our eBay Store Titles Descriptions Store Categories Spray Guns Equipment Turbine Sprayers Respirators Airbrushing Equipment Acc Airbrush Stencils Airbrush Paint Paint Kits Kustom Shop Products- Auto Paint, Flakes, Stencils Restoration Shop Auto Paint House of Kolor-Auto Paint DVD's, Book's, and How To's: Pinstriping: Brushes-Paint-Acc Pneumatic Air Tools 3M Products Body Shop Equipment Body Shop Supplies Safety Equipment Supplies Detail Products Tanning Kits Accessories Clearance $0.01 C
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
Go To Store
|