> Miscellaneous > Vetus

Stainless steel stanchions are the foundation for installin ... Read more

Stainless steel stanchions are the foundation for installing lifelines around the perimeters on deck. Vetus stanchions are made entirely of AISI 316 stainless steel. Offered in 5 sizes. Each has a tapered design and two holes for threading lifeline, except for the smallest size which has only one hole. Tube diameter is 1 inch. Minimize

These wiper motors can be used with single or dual (pantogr ... Read more

These wiper motors can be used with single or dual (pantograph) wiper arms. 2-speed, self-parking Extremely quiet operation Stainless steel shaft 12 volt Factory pre-set sweep of 110, adjustable to 85, 100, 110 or 120 Compact size: 7- 5/8L x 4W x 2- 1/4H Wiper blade and arm sold separately Minimize

Designed for saloons, cabins and heads; air flows in throug ... Read more

Designed for saloons, cabins and heads; air flows in through the face of the unit and out the back Ideally suited for heat extraction near refrigeration units Brushless motor is hardly audible; suitable for installation in both ceiling and bulkhead Not waterproof; can be combined with UFO deck ventilators for activepassive exhaust to exterior Extremely low energy consumption of 0.22 amp at 12 volts; 0.11 amp at 24 volts Onoff switch located on face of housing 50,000+ hour service life MP Master List Minimize

Vetus Denouden Stainless Steel Ball Valves - 2" STAINLESS B ... Read more

Vetus Denouden Stainless Steel Ball Valves - 2" STAINLESS BALL VALVE BSP Minimize

These cowl ventilators are made of flexible PVC or 316 stai ... Read more

These cowl ventilators are made of flexible PVC or 316 stainless steel. Ring nuts and mating deck flanges are made of hard plastic, or stainless steel. The cowls can rotate and are removable Models -2 and -316 are supplied with a ring nut which can be loosened easily by hand; no tools are required Models -S are supplied with a mating deck flange which bolts to the deck Dorade Box (sold separately) mates with the cowl vent ring nut, catches and drains water that enters the cowl, and can be fully sealed by means of a built-in stainless steel mushroom ventilator All have red interiors except the part numbers with W at the end, which have white interiors MP Master List Minimize

These cowl ventilators are made of flexible PVC or 316 stai ... Read more

These cowl ventilators are made of flexible PVC or 316 stainless steel. Ring nuts and mating deck flanges are made of hard plastic, or stainless steel. The cowls can rotate and are removable Models -2 and -316 are supplied with a ring nut which can be loosened easily by hand; no tools are required Models -S are supplied with a mating deck flange which bolts to the deck Dorade Box (sold separately) mates with the cowl vent ring nut, catches and drains water that enters the cowl, and can be fully sealed by means of a built-in stainless steel mushroom ventilator All have red interiors except the part numbers with W at the end, which have white interiors MP Master List Minimize

Push-pull cables may be installed horizontally or verticall ... Read more

Push-pull cables may be installed horizontally or vertically 316 stainless steel handle All handles provided with red-colored knob (black available) Minimize

Easily installed, just fit the nipples and connect the hose ... Read more

Easily installed, just fit the nipples and connect the hoses Assume the shape of the space in which they are placed Can be positioned in places that are normally difficult to reach Able to withstand higher pressures generated by pitching and rolling - welded seams have an extra internal strip added as reinforcement Includes: 2 38mm (1- 1/2) 90 nipples and 1 16mm ( 5/8) 90 ventilation nipple (installed) Water & Holding Tanks Minimize

Vetus Denouden Dorade Boxes - DORADE BOX FOR TOM COWL

Vetus Denouden Stainless Steel Ball Valves - 2" STAINLESS B ... Read more

Vetus Denouden Stainless Steel Ball Valves - 2" STAINLESS BALL VALVE BSP Valves & Thru Hulls Minimize

These wiper motors can be used with single or dual (pantogr ... Read more

These wiper motors can be used with single or dual (pantograph) wiper arms. 2-speed, self-parking Extremely quiet operation Stainless steel shaft 12 volt Factory pre-set sweep of 110, adjustable to 85, 100, 110 or 120 Compact size: 7- 5/8L x 4W x 2- 1/4H Wiper blade and arm sold separately Minimize

Provides constant ventilation Cannot be closed; interior ba ... Read more

Provides constant ventilation Cannot be closed; interior baffles make this ventilator rain and splash proof Standard model (shown) has solid stainless steel top; Trans version includes a center translucent plate These UFO ventilators may be used in combination with electric ventilators or blowers Plastic interior is included and serves as a mosquito screen as well Deck cut-out size is 2- 7/8 MP Master List Minimize

Vetus Denouden Louvered Air Suction Vents - LOUVERED AIR SU ... Read more

Vetus Denouden Louvered Air Suction Vents - LOUVERED AIR SUCTION VENT ASV 92 MP Master List Minimize

The wiper arm, which fits the HDM motors, are supplied as s ... Read more

The wiper arm, which fits the HDM motors, are supplied as standard in stainless steel. Matching wiper blade (model WB) is 26 long. Available in lengths of 20 or 30 Parallel system Minimize

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR ... Read more

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR SUCTION VENT SSVL 72 MP Master List Minimize

Vetus Denouden KW Steering Wheels - STEERING WHEEL 17-3/4" ... Read more

Vetus Denouden KW Steering Wheels - STEERING WHEEL 17-3/4" MAHOGANY RIM Minimize

Vetus Denouden Louvered Air Suction Vents - LOUVERED AIR SU ... Read more

Vetus Denouden Louvered Air Suction Vents - LOUVERED AIR SUCTION VENT 102 MP Master List Minimize

The wiper arm, which fits the HDM motors, are supplied as s ... Read more

The wiper arm, which fits the HDM motors, are supplied as standard in stainless steel. Matching wiper blade (model WB) is 26 long. Available in lengths of 20 or 30 Parallel system Boat Windshield Wipers Minimize

Provides constant ventilation Cannot be closed; interior ba ... Read more

Provides constant ventilation Cannot be closed; interior baffles make this ventilator rain and splash proof Standard model (shown) has solid stainless steel top; Trans version includes a center translucent plate These UFO ventilators may be used in combination with electric ventilators or blowers Plastic interior is included and serves as a mosquito screen as well Deck cut-out size is 2- 7/8 Minimize

Two or three motors may be connected to this panel, these m ... Read more

Two or three motors may be connected to this panel, these must be two speed and self parking, such as Vetus models RWS and HDM. An interval wipe feature with three different settings and a wash wipe function are also built in No need to install separate switches for the motors or windscreen washer Panel is suitable for 12 and 24 Volt electrical installations and for wiper motors with a power consumption up to 10 A maximum each Panel is not protected against overload 3.7 x 3.7 x 0.6 high, with a built in depth of 1.2 Boat Windshield Wipers Minimize

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR ... Read more

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR SUCTION VENT SSVL 82 Minimize

These wiper motors can be used with single or dual (pantogr ... Read more

These wiper motors can be used with single or dual (pantograph) wiper arms. 2-speed, self-parking Extremely quiet operation Stainless steel shaft 12 volt Factory pre-set sweep of 110, adjustable to 85, 100, 110 or 120 Compact size: 7- 5/8L x 4W x 2- 1/4H Wiper blade and arm sold separately Boat Windshield Wipers Minimize

Extraction ventilators should never be operated when the en ... Read more

Extraction ventilators should never be operated when the engines are running. The suction power of the engine may over-rotate the ventilator and cause the electric motor to burn out. Available in 12 or 24 volt Capacity: air displacement of approx. 430 cfm per minute at 12V, 440 cfm per minute at 24V Suitable for bulkhead mounting and for receiving 7 ID air ducting hose MP Master List Minimize

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR ... Read more

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR SUCTION VENT SSVL 72 Minimize

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR ... Read more

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR SUCTION VENT SSVL 82 MP Master List Minimize

Extraction ventilators should never be operated when the en ... Read more

Extraction ventilators should never be operated when the engines are running. The suction power of the engine may over-rotate the ventilator and cause the electric motor to burn out. Available in 12 or 24 volt Capacity: air displacement of approx. 430 cfm per minute at 12V, 440 cfm per minute at 24V Suitable for bulkhead mounting and for receiving 7 ID air ducting hose Minimize

The metal parts of these wiper arms are made of high-gloss ... Read more

The metal parts of these wiper arms are made of high-gloss polished stainless steel and the black components are made of top-grade synthetic materials. Wiper blades may be fitted in one of two positions on the pantograph arms, so that the wiped surface can be adjusted. The pantograph arm spindle centers are 1-25/32". Boat Windshield Wipers Minimize

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR ... Read more

Vetus Denouden Louvered Engine Room Air Vent - LOUVERED AIR SUCTION VENT SSVL 152 MP Master List Minimize

Drinking water in a Vetus flexible water tank remains virtu ... Read more

Drinking water in a Vetus flexible water tank remains virtually tasteless and odorless. The fabric layers shown in picture consist of an outer wear resistant layer (1), a stretch and puncture resistant reinforcement layer (2), and a special taste-free layer (3).Easily installed, no extra parts required, just fit the nipples and connect the hosesTank assumes the shape of the space in which it is placedCan be positioned in places that are normally difficult to reachTank is able to withstand higher pressures generated by pitching and rolling - welded seams have an extra internal strip added as reinforcementIncludes: a 35mm (1-3/8") 90° fill nipple (installed at top of tank) and a 16mm (5/8") 90° outlet nipple (customer installed in desired location) Minimize