> Miscellaneous > supco

Temperature chart recorder remote reading, with programmabl ... Read more

Temperature chart recorder remote reading, with programmable speed and temperature ranges. Designed specifically for refrigerator, freezer, and environmental temperature measurement. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 100 feet away by using an optional long length sensor wire. Two selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds. Battery backup assures normal operation during power interruptions. 12 Volt operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 32 degree F to 140 degree F. Ambient operating - relative humidity: 96 percent maximum. Chart speed selectable: 6 hrs, 24 hrs, 7 days, 31 days. Chart rotation mode: single turn or continuous. Chart speed accuracy: +/- 1 percent . Chart diameter: 6 inches. Display: 3 digit LED 0.5". Primary power supply: 120 VAC, 50/60Hz. 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording pen: Ink type. Weight: 4 lbs, 7 oz. Temperature scale selectable (Fahrenheit): -40 degree F to +30 degree F, -20 degree F to +50 degree F, +50 degree F to +120 degree F. Temperature Accuracy: +/-2 degree F. Temperature sensor: 15' long sensor wire with 4" Stainless Steel submersible probe. Minimize

The Supco TA7 Temperature Alarm is battery operated. ADJ 10 ... Read more

The Supco TA7 Temperature Alarm is battery operated. ADJ 10 F to 80 F; Note: There is a 1 hour delay. (72-1151) 72-1151 Minimize

Temperature chart recorder remote reading, with programmabl ... Read more

Temperature chart recorder remote reading, with programmable speed and temperature ranges. Designed specifically for refrigerator, freezer, and environmental temperature measurement. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 100 feet away by using an optional long length sensor wire. Two selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds. Battery backup assures normal operation during power interruptions. 12 Volt operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 32 degree F to 140 degree F. Ambient operating - relative humidity: 96 percent maximum. Chart speed selectable: 6 hrs, 24 hrs, 7 days, 31 days. Chart rotation mode: single turn or continuous. Chart speed accuracy: +/- 1 percent . Chart diameter: 6 inches. Display: 3 digit LED 0.5". Primary power supply: 220-240 VAC, 50/60Hz. 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording pen: Ink type. Weight: 4 lbs, 7 oz. Temperature scale selectable (Fahrenheit): -40 degree F to +30 degree F, -20 degree F to +50 degree F, +50 degree F to +120 degree F. Temperature Accuracy: +/-2 degree F. Temperature sensor: 15' long sensor wire with 4" Stainless Steel submersible probe. Minimize

Supco's IAQ series measure carbon dioxide (CO2), temperatur ... Read more

Supco's IAQ series measure carbon dioxide (CO2), temperature and humidity with dew point and wet bulb. Ideal for air quality diagnosis, they can be useful in identifying sick building syndrome due to high levels of CO2. Features: visible/audible (80db) CO2, alarm, large triple function LCD display, min/max, average recall, alarm output relay, long time drift compensation, non-dispersive infrared (NDIR) sensor, 12 VDC power adapter (120 VAC supplied), TWA (time-weighted average) 8 hrs, STEL (shor t-term exposure limit) 15 minutes. Applications: residential, offices, restaurants, warehouses, garages, green houses. Range: 0 - 2000 ppm. Resolution: 1 Ppm. Accuracy: +/-75 ppm +/-5 percent rdg (0-2000 ppm) Not specified for out of scale. Pressure Dependence: +1.6 percent Reading Per Kpa Deviation From Normal Pressure, 100Kpa. Temperature - Range: 14 To 140 degree F (-10.0 To 60.0 degree C), Resolution: 0.1 degree F (0.1 degree C), Accuracy: +/-0.9 degree F (+/- 0.6 degree C). Humidity - Range: 0.0 to 99 percent Non-Condensing, Resolution: 0.1 percent, Accuracy: +/-3 percent (10 to 90 percent ) +/-5 percent (others). Warm Up: 30 seconds. Operating: +32 to 122 degree F (0 to 50 degree C) 0-95 percent RH Non-Condensing. Storage: -4 to 140 degree F (-20 to 60 degree C) 0-99 percent RH Non-Condensing. Power: 4 AA batteries (Included). Minimize

Carbon monoxide meter features from 35 PPM to 200 PPM, the ... Read more

Carbon monoxide meter features from 35 PPM to 200 PPM, the beeper sounds periodically, 200 PPM, the beeper sounds continuously. Measure CO quickly and easily in working and living environments. Applications: check dangerous CO levels, identify malfunctioning equipment. Measurement range: 0 to 1000 PPM. Measurement resolution: 1 PPM. Accuracy: 5 percent or +/-10 PPM (0-100 PPM), 10 percent +/- 10 PPM (>100PPM). Warm up period: <2 seconds. Operating temperature: 32 degree F to 122 degree F (0 degree C to 50 degree C). Storage temperature: -22 degree F to 140 degree F (-30 degree to 60 degree C). Operating Humidity: 0-99 percent relative humidity (non-condensing). Battery: 9V (included). Auto power off: after 15 minutes of inactivity. Sensor type: stabilized electrochemical gas-specific (CO). Typical sensor life: 3 years. Minimize

Supco LPT LOGiT Pressure and Temperature Logger. For pressu ... Read more

Supco LPT LOGiT Pressure and Temperature Logger. For pressure and temperature sensitive applications such as compressor run cycles, testing new installations, pneumatic air lines, tracking intermittent problems and superheat measurements. Standard Accessories: 15' Remote Temperature Sensor. Pressure Sensor. Features/Benefits: Stores over 10,000 measurement points. 1 second to 18 hour sample rate; 1 second increments. Custom user identification (30 Characters). Real time data monitoring. Over/Under Alarm threshold settings. Visual alarm indication. User selectable Recording Start (specify date and time, immediate after setup or on door close). Tamper proof and 20 month battery life (at 1 minute sample rate). Data rollover option. Unique logger identification. One PC Software operates with all loggers (LLS not included). Graphic or text data, zoom capability. USB interface optional (USBS) and 1 year warranty. Minimize

High temperature recorder, remote reading, with programmabl ... Read more

High temperature recorder, remote reading, with programmable speed and temperature ranges. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 2000 feet away by using an optional long length thermocouple sensor wire. Selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds.. Standard adapter for 220 VAC operation. Battery backup assures normal operation during power interruptions. 12 VAC operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Temperature scale selectable: (Celsius) 0 degree C to 120 degree C, 0 degree C to +250 degree C, +250 degree C to +500 degree C. Ambient operating temperature range: 0 degree C to +60 degree C. Ambient Operating relative humidity: 96 percent maximum. Chart speed selectable: 6 hours, 24 hours, 7 days, 31 days. Chart rotation mode: selectable, single turn or continuous. Chart speed accuracy: +/- 1 percent. Display: 3-1/2 digit LED 0.5". Temperature sensor: 6' long high temperature type "J" thermocouple wire probe. Can not be used in liquid or semi-solid. Alternate power: 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not included). Battery life: 48 hours continuous use. Recording pen: ink type. 220-240V Voltage. Minimize

The LTH is a self contained, precision instrument for recor ... Read more

The LTH is a self contained, precision instrument for recording the temperature, humidity and dew point of the surrounding environment. The LTH can store up to 21500 temperature samples, or up to 10,750 samples of temperature, humidity and dew point. Sample point capacity: 21,500 for Temperature only 10,750 points for temperature, humidity and dew point. Sample rate: 1 second to 18 hour. Alarms: Over and under alarms for temperature and humidity. visual alarm indication. Temperature range: 32 to 140 degree F (0 to 60 degree C) with alkaline battery, -40 to 150 degree F (-40 to 65 degree C) with Lithium Battery. Temperature accuracy: +/-2 degree F (1 degree C). Temperature resolution: 0.1 degree F (0.05 degree C). Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 99.9 percent RH, Non-condensing. Relative humidity accuracy: +/- 2 percent full scale, from 0 to 95 percent RH for temperatures between 32 degree F and 140 degree F (0 degree C 60 degree C). Relative humidity resolution: 0.1 percent RH Humidity is factory calibrated. Operating range: temperature: 32 to 140 degree F (0 to 60 degree C) using alkaline battery. -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Humidity: 0 to 99.9 percent, non-condensing. Storage temperature: -40 to 170 degree F (-40 to 77 degree C). Calibration: Single point offset calibration available through software. Power source: 9V Alkaline or lithium battery. Battery life (average use): 20 Months using alkaline battery, 40 months using lithium battery. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). 1 Year warranty. Minimize

Record and instantly display trends for temperature, humidi ... Read more

Record and instantly display trends for temperature, humidity and dew point with the DVTH. Monitor real time measurements for instant environmental conditions. Download over 40,000 data points to your PC for further analysis. Data logging has never been this visual. Text display: real time temperature, humidity and dew point. logging summary, sample rate, memory used and memory left. Graph display: shows measurement trends graphically, with scrolling feature. Visual over and under alarm indicators for temperature and humidity. USB connection (cable included), compatible with WindowsTM 98SE, ME, 2000, XP and above, calibration through software. Applications: refrigerators/freezers, greenhouses, commercial refrigeration systems, florists, wine storage, museums, medical storage facilities, laboratories. Calibration: user single point offset calibration is available through software for both temperature and humidity. Calibration is password protected. Operating temperature: 15 to 150 degree F (-10 to 65 degree C). Storage temperature -5 to 160 degree F (-20 to 70 degree C). Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 99 percent RH, non condensing. Relative humidity accuracy: +/- 2 percent RH from 10 to 90 percent RH. Relative humidity resolution: 0.01 percent RH. Temperature accuracy: +/-1 degree F (0.5 degree C). Temperature resolution: 0.01 degree F or 0.01 degree C. Power source: 3 AA alkaline or lithium batteries. Battery life (average use): 2 years. Measures 4" length by 3-3/64" width by 1-1/2" height. Weight: 7.0 oz (200g). Minimize

Combining unmatched performance with ultimate productivity, ... Read more

Combining unmatched performance with ultimate productivity, The Vacuum Sentry (V640 Series) guards system service activity and provides notification when pre-set alarm thresholds are reached. The VG640T which adds the remote alarm receiver (R100) with audible, visual and vibration alarms. Radio Frequency (RF) Transmission Signal (VG640T). Auto Shut Off. Built-in Hanger. User Addressable Remote Alarm(R100) available (Operates with VG640T only). One Year Warranty. Applications: Vacuum Measurements During System Evacuation, Measurements to Confirm System Leaks, High Precision Laboratory Tests. Sensor Type: Thermistor. Connector Type: Standard 1/4 inch male flare fitting. Vacuum Range: 0 - 19000 Micron (0 – 2600 Pascal). Resolution: 0-140: 0.5 Micron, 140-400: 1 Micron, 400-800: 2 Micron, 800-2000: 5 Micron, 2000-6000: 20 Micron, 6000-9000: 100 Micron, 6000-16000: 200 Micron, 16000-19000: 1000 Micron. Units: Micron, milliBar, Pascal, Torr, milliTorr. Accuracy: +/-10 percent or +/-10 Micron, whichever is larger (50 to 2000 Microns) at 75 degree F. Update Rate: 0.5 second. Alarm: Audible and visual alarm for high and low vacuum. Remote Alarm: (R100) Up to 400 feet remote audible, visual and vibrating alarm for high and low vacuum. Alarm Volume: 87 dB for both unit and remote. Operating Temperature Range: 0 degree F to 150 degree F ( -17 degree C to 65 degree C). Overpressure: 800 PSI max (55 Bar). Power Source: 3 AA Batteries. Battery Life: 600 Hours continuous usage, with battery indicator. Auto Shutoff: 8 hours when alarms are active. When alarms are disabled: 10 minutes when vacuum reading is above 19000 Microns, 1 hour when vacuum reading is below 19000 Microns. Weight: 6 oz. Measures 2-3/4" width 5-1/2" height by 1-1/2" depth; 1 year warranty. Minimize

Manufacturer: Supco

The LTT is a precision instrument for recording the tempera ... Read more

The LTT is a precision instrument for recording the temperature of two independent temperature probes. Each temperature sensor is enclosed within a 4" stainless steel jacket. The LTT temperature probes are interchangeable, and replacement probes are available. Each temperature sensor cable is 6' long. The LTT can store 21,500 temperature samples when using a single probe. The LTT can store 10,750 temperature samples when using both probes. The temperature difference between probe 1 and probe 2 is also recorded. Sample point capacity: 21500 temperature points for a single probe. 10750 temperature points and temperature difference, when using both probes. Alarms: Over and under alarms for each external temperature probe. Alarms are not available for temperature difference. Calibration: User single point offset calibration is available through software for both temperature sensors. Logger operating temperature range: 32 to 140 degree F (0 to 60 degree C) using alkaline battery, -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 95 percent RH non condensing. Probe specification: Media compatible 4" stainless steel tip. 6' cable, The probes are interchangeable. Probe temperature range: -50 to 300 degree F (-46 to 150 degree C). Temperature accuracy: +/-2 degree F (1 degree C). Temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V Alkaline or Lithium battery. Battery life (average use): 20 Months using alkaline battery, 40 months using lithium battery. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). 1 Year warranty. Minimize

Set alarms for 4 separate temperature applications. Provide ... Read more

Set alarms for 4 separate temperature applications. Provides a quick alert for a multitude of temperature problems. Alarm channels: 4. Alarm adjustment range: 0/100 degree F. Probe: Encapsulated sensor with 15 feet cord (4 included). Sensor Type: Thermistor. Maximum Probe extension: 300 ft. Remote Alarm Connections: Terminal strip screw connection 120VAC, 5 Amp max., (dry contacts). Power: 120V Power adapter supplied. Battery backup: 9V alkaline battery (not included). Case: NEMA 3 type. Mounting: Surface, keyhole or recessed screws. Measures 6" length by 3" width by 7-1/2" height, warranty: 1 year. Minimize

Supco Electronic Defrost Timer PN#EDT10 1/3hp 115VAC

Temperature humidity and dew point data logging in a miniat ... Read more

Temperature humidity and dew point data logging in a miniature, self contained device. The SL series data loggers provide concise measurements for critical environmental conditions. Measurements for critical environmental conditions. Windows 98SE, ME, 2000, XP, Vista and 7, compatible with 32 and 64 bit systems, not compatible with Windows 95 or NT. PC, delayed start or push button recording control, visual alarm indication. User selectable stop on memory full or memory rollover for continuous recording, real time monitoring on display. Selectable degree F/C display. USB Interface standard (cable included). For temperature and/or humidity sensitive applications: refrigerators/freezers, greenhouses, commercial refrigeration systems, florists, wine storage, museums, medical storage facilities, laboratories. Sample point capacity: 43,344 for temperature only. 21,672 for temperature, humidity and dew point. Sample rate: 1 Second to 18 hours. Alarms visual over and under alarm indicator for temperature and humidity. Temperature range: -4 degree F to 140 degree F (-20 to 60 degree C). Temperature accuracy: +/-1 degree F (0.5 degree C). Temperature resolution: 0.1 degree F or 0.1 degree C. Relative humidity range: 0 to 99 percent RH, non condensing. Relative humidity accuracy: +/- 2 percent RH, from 10 to 90 percent RH. Relative humidity resolution 0.1 percent RH. Time accuracy: +/- 100 ppm at 75 degree F. Displays real time temperature and relative humidity. Storage temperature: -4 to 160 degree F (-20 to 70 degree C). Power source: 3.0V (CR2032) lithium coin cell battery (included). Battery life: 3 years (typical). Calibration password protected single point offset calibration available through software. USB Interface standard (cable included). Measures 3" length by 1-19/32" width by 19/32" height. Weight: 1.0 oz (28g). Minimize

Temperature chart recorder remote reading, with programmabl ... Read more

Temperature chart recorder remote reading, with programmable speed and temperature ranges. Designed specifically for refrigerator, freezer, and environmental temperature measurement. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 100 feet away by using an optional long length sensor wire. Two selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds. Battery backup assures normal operation during power interruptions. 12 Volt operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 0 degree C to 60 degree C. Ambient operating - relative humidity: 96 percent maximum. Chart speed selectable: 6 hrs, 24 hrs, 7 days, 31 days. Chart rotation mode: single turn or continuous. Chart speed accuracy: +/- 1 percent . Chart diameter: 6 inches. Display: 3 digit LED 0.5". Primary power supply: 120 VAC, 50/60Hz. 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording pen: Ink type. Weight: 4 lbs, 7 oz. Temperature scale selectable (Celsius): -40 degree C to 0 degree C, -30 degree C to 10 degree C, 10 degree C to 50 degree C. Temperature Accuracy: +/-1 degree C. Temperature sensor: 15' long sensor wire with 4" Stainless Steel submersible probe. Minimize

Temperature chart recorder remote reading, with programmabl ... Read more

Temperature chart recorder remote reading, with programmable speed and temperature ranges. Designed specifically for refrigerator, freezer, and environmental temperature measurement. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 100 feet away by using an optional long length sensor wire. Two selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds. Battery backup assures normal operation during power interruptions. 12 Volt operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 32 degree F to 140 degree F. Ambient operating - relative humidity: 96 percent maximum. Chart speed selectable: 6 hrs, 24 hrs, 7 days, 31 days. Chart rotation mode: single turn or continuous. Chart speed accuracy: +/- 1 percent . Chart diameter: 6 inches. Display: 3 digit LED 0.5". Primary power supply: 120 VAC, 50/60Hz. 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording pen: Ink type. Weight: 4 lbs, 7 oz. Temperature scale selectable (Fahrenheit): -40 degree F to +30 degree F, -20 degree F to +50 degree F, +50 degree F to +120 degree F. Temperature Accuracy: +/-2 degree F. Temperature sensor: 15' long sensor wire with 4" Stainless Steel submersible probe. Minimize

High temperature recorder, remote reading, with programmabl ... Read more

High temperature recorder, remote reading, with programmable speed and temperature ranges. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 2000 feet away by using an optional long length thermocouple sensor wire. Selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds.. Standard adapter for 120 VAC operation. Battery backup assures normal operation during power interruptions. 12 VAC operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Temperature scale selectable: (Fahrenheit) 0 degree F to +250 degree F, 0 degree F to +500 degree F, +500 degree F to 1000 degree F. Ambient operating temperature range: +32 degree F to +140 degree F. Ambient Operating relative humidity: 96 percent maximum. Chart speed selectable: 6 hours, 24 hours, 7 days, 31 days. Chart rotation mode: selectable, single turn or continuous. Chart speed accuracy: +/- 1 percent. Display: 3-1/2 digit LED 0.5". Temperature sensor: 6' long high temperature type "J" thermocouple wire probe. Can not be used in liquid or semi-solid. Alternate power: 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not included). Battery life: 48 hours continuous use. Recording pen: ink type. 110-120V Voltage. Minimize

Temperature chart recorder remote reading, with programmabl ... Read more

Temperature chart recorder remote reading, with programmable speed and temperature ranges. Designed specifically for refrigerator, freezer, and environmental temperature measurement. The Supco Temperature Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately measure and record temperatures in air, gas, liquids, powders, solids, and semi-solids. Recordings can be made from any distance up to 100 feet away by using an optional long length sensor wire. Two selector switches located on the face panel allow for the recording of 3 different temperature ranges at 4 different recording speeds. Battery backup assures normal operation during power interruptions. 12 Volt operation - allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 0 degree C to 60 degree C. Ambient operating - relative humidity: 96 percent maximum. Chart speed selectable: 6 hrs, 24 hrs, 7 days, 31 days. Chart rotation mode: single turn or continuous. Chart speed accuracy: +/- 1 percent . Chart diameter: 6 inches. Display: 3 digit LED 0.5". Primary power supply: 220-240 VAC, 50/60Hz. 12 Volt vehicle operation with optional adapter. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording pen: Ink type. Weight: 4 lbs, 7 oz. Temperature scale selectable (Celsius): -40 degree C to 0 degree C, -30 degree C to 10 degree C, 10 degree C to 50 degree C. Temperature Accuracy: +/-1 degree C. Temperature sensor: 15' long sensor wire with 4" Stainless Steel submersible probe. Minimize

A highly reliable, extremely accurate temperature indicator ... Read more

A highly reliable, extremely accurate temperature indicator. Custom designed faceplates with your company name or logo are available with quantity orders. Applications: Direct replacement for old style 2-1/4" and 2-1/2" dial gauges. Commercial refrigeration/freezer panels. Hospital/laboratory control panels. Ambient operating range: 32 - 150 degrees Fahrenheit. Line voltage: 120 VAC. Probe: encapsulated sensor with 6’ long cord. Case: high impact thermoplastic. Scale: -40 - 199 degrees Fahrenheit. 1 number of input. Thermo couple Type: J. Temperature Range: -70 - 199 degrees Fahrenheit. Temperature resolution: 1.0 degrees Fahrenheit. Temperature accuracy: +/- 1.0 degrees Fahrenheit. Power: 120/240V, 50/60 Hz. Weight: 7.4 oz. Measures 3-3/8" length by 3-3/8" height, 1 year warranty. Minimize

Features: Silicone Nitride for strong, durable operation a ... Read more

Features: Silicone Nitride for strong, durable operation and performance Easy installation, kit includes igniter, universal breakaway mounting bracket, hardware, and instructions Miniature design Strongest physical durability CSA approved 3 year warranty Benefits: Universal replacement reduces SKU's Replaces over 100 OEM part numbers Long igniter life (non porous construction) Low energy consumption uses half the power of silicon carbide igniters Superior gas lighting ability, faster time to temperature response than silicon carbide igniters No need for power supply module Applications - various types of gas-fired equipment: Furnaces Boilers Unit heaters Water heaters Fire places Pool heaters Spas Specifications: Operating Voltage: 115 VAC Min 102-132 VAC Time to Temperature: 1800 deg F < 10 second at 115 VAC and 75F +- 10F ambient Steady temperature: 2366 deg F Cold resistance: 46 Ohms at 75 deg F at +-10F Steady current: .53 Amps at 115 VAC High Temperature Wire Leads: 6" 20 AWG 572F UL1332 Life cycles: >200,000 Minimize

Enviro Meters measure critical HVAC/R parameters to maximiz ... Read more

Enviro Meters measure critical HVAC/R parameters to maximize productivity and performance. Diagnose and solve HVAC system problems. Measures temperature, humidity and dew point. Temperature range: 14 degree F to 122 degree F. Humidity range: 0 percent to 99.9 percent RH. Minimum/maximum/average. Data hold. Backlit LCD. Auto power off. Hard carrying case included. Temperature resolution: 0.1 degree F. Humidity resolution: 0.1 percent RH. Temperature accuracy: +/- 1.8 degree F. Humidity accuracy: 3 percent RH (5 to 95 percent RH). Battery: 1.5V AAA x 3 (included). Measures 2-25/64" length by 1-3/16" width by 4-51/64" height. Minimize

Manufacturer: Supco

Quickly and easily takes the surface temperature of any obj ... Read more

Quickly and easily takes the surface temperature of any object. Just point, pull the trigger, and read the temperature on the display. Temperature Range: -4F to 662F (-20C to 350C) Resolution: 1F (1C) Emmisivity: 0.95 fixed Distance Factor: 8:1 9-Volt Battery included. Minimize

Supco Economy Temperature Alarm TA7 Economy Temperature Ala ... Read more

Supco Economy Temperature Alarm TA7 Economy Temperature Alarm Temperature Alarms Economy Temperature Alarm Adjustment from -10*F to 80*F Minimize

Record and instantly display trends for temperature, humidi ... Read more

Record and instantly display trends for temperature, humidity and dew point with the DVTH. Monitor real time measurements for instant environmental conditions. Download over 40,000 data points to your PC for further analysis. Data logging has never been this visual. Text display: real time temperature, humidity and dew point. logging summary, sample rate, memory used and memory left. Graph display: shows measurement trends graphically, with scrolling feature. Visual over and under alarm indicators for temperature and humidity. USB connection (cable included), compatible with WindowsTM 98SE, ME, 2000, XP and above, calibration through software. Applications: refrigerators/freezers, greenhouses, commercial refrigeration systems, florists, wine storage, museums, medical storage facilities, laboratories. Calibration: user single point offset calibration is available through software for both temperature and humidity. Calibration is password protected. Operating temperature: 15 to 150 degree F (-10 to 65 degree C). Storage temperature -5 to 160 degree F (-20 to 70 degree C). Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 99 percent RH, non condensing. Relative humidity accuracy: +/- 2 percent RH from 10 to 90 percent RH. Relative humidity resolution: 0.01 percent RH. Temperature accuracy: +/-1 degree F (0.5 degree C). Temperature resolution: 0.01 degree F or 0.01 degree C. Power source: 3 AA alkaline or lithium batteries. Battery life (average use): 2 years. Measures 4" length by 3-3/64" width by 1-1/2" height. Weight: 7.0 oz (200g). Minimize

The LTC is a precision instrument for recording the tempera ... Read more

The LTC is a precision instrument for recording the temperature of a thermocouple probe, and the temperature of the internal sensor. The unit can be used with J, K, E, T, R and S type thermocouples. It comes standard with one K-type thermocouple probe. The LTC can store up to 10,750 samples of thermocouple and internal sensor temperatures. Sample point capacity: 10,750 points of thermocouple and ambient temperature. Alarms: Over and under alarms for thermocouple and ambient temperature. Calibration: Factory calibrated. User single point offset calibration is available through software for both thermocouple and ambient temperatures. Logger operating temperature: 32 to 140 degree F (0 to 60 degree C). Storage temperature: -40 to 170 degree F (-40 to 77 degree C). Real time clock accuracy: +/- 100ppm at 75 degree F. Supported thermocouples: J, K, E, T, R, S software selectable. Thermocouple connector: Industry standard miniature universal connector. Supplied probe: 3ft FDA approved K type thermocouple probe. Probe temperature range is -40 to 400 degree F (-40 to 204 degree C). Thermocouple sensor accuracy: Thermocouple wire dependant. The supplied probe accuracy is +/- 4 degree F (2 degree C) or 0.75 percent of reading, whichever is greater. Thermocouple sensor resolution: 0.1 degree F (0.05 degree C). Internal sensor: +/-2 degree F (1 degree C). For full accuracy allow a few. Temperature accuracy: minutes of thermal setting after connecting the thermocouple to the logger. Internal sensor temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V alkaline or lithium battery (not included). Battery life (average use): 20 Months using alkaline battery. 40 months using lithium battery. Software compatibility: Compatible with logit PC software version 1.20 and above. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). Weight: 2.5 oz (71g). 1 Year warranty. Minimize

The LPT data logger is a precision instrument for recording ... Read more

The LPT data logger is a precision instrument for recording pressure and temperature. The logger can store up to 21,500 data points, when it is setup to record either pressure or temperature (but not both). The logger can store up to 10,750 points, when it is setup to record both pressure and temperature. The external temperature probe is interchangeable and replacement probes are available. The pressure sensor is not interchangeable. Each logger is individually calibrated to the pressure sensor at the factory. Sample point capacity: 10750 data points when pressure and temperature are recorded together. 21500 points when recording only pressure or only temperature. Over and under alarms for pressure and temperature probes. Calibration: factory calibrated for the pressure sensor. user single point offset calibration is available through software for both pressure and temperature. Logger operating temperature: 32 to 140 degree F (0 to 60 degree C) using alkaline battery. -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Pressure sensor: media compatible stainless steel sensor 6' cable. Pressure sensor operating temperature: 32 to 130 degree F (0 to 54 degree C). Time accuracy: +/- 100ppm at 75 degree F. Pressure range: 0 to 500 psi. Pressure accuracy: +/- 3 psi. Pressure resolution: 0.15 psi. External temperature probe: -40 to 50 degree F (-40 to 65 degree C), 15' standard. Can be extended to 300'. Temperature accuracy: +/- 1 degree (0.5 degree C). Temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V alkaline or lithium battery. Battery life (average use) 20 months using alkaline battery. 40 months using lithium battery. Measures 3" length by 2-1/2" width by 1-3/32" height. Weight: 2.5 oz (71g). Minimize

The LTT is a precision instrument for recording the tempera ... Read more

The LTT is a precision instrument for recording the temperature of two independent temperature probes. Each temperature sensor is enclosed within a 4" stainless steel jacket. The LTT temperature probes are interchangeable, and replacement probes are available. Each temperature sensor cable is 6' long. The LTT can store 21,500 temperature samples when using a single probe. The LTT can store 10,750 temperature samples when using both probes. The temperature difference between probe 1 and probe 2 is also recorded. Sample point capacity: 21500 temperature points for a single probe. 10750 temperature points and temperature difference, when using both probes. Alarms: Over and under alarms for each external temperature probe. Alarms are not available for temperature difference. Calibration: User single point offset calibration is available through software for both temperature sensors. Logger operating temperature range: 32 to 140 degree F (0 to 60 degree C) using alkaline battery, -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 95 percent RH non condensing. Probe specification: Media compatible 4" stainless steel tip. 6' cable, The probes are interchangeable. Probe temperature range: -50 to 300 degree F (-46 to 150 degree C). Temperature accuracy: +/-2 degree F (1 degree C). Temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V Alkaline or Lithium battery. Battery life (average use): 20 Months using alkaline battery, 40 months using lithium battery. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). 1 Year warranty. Minimize