> Miscellaneous > Sea Dog

Nickel-plated steel Spring loaded Made of nickel-plated cas ... Read more

Nickel-plated steel Spring loaded Made of nickel-plated cast steel, spring-loaded. Length: 3-7/16". Minimize

Covers holes up to 1-1/4" Accommodates wires up to 3/16" Co ... Read more

Covers holes up to 1-1/4" Accommodates wires up to 3/16" Color: Black Covers up to 1-1/4" dia. hole where wires have been run through. Handles up to 3/16" wire. 2"x1-1/2". Color: Black (Mounting screws not included.) Minimize

Sea-Dog 3-Way Corner Rail Fittings are constructed from the ... Read more

Sea-Dog 3-Way Corner Rail Fittings are constructed from the highest grade 316 stainless steel for a quality look and the best possible corrosion protection. They feature 1/4" set screws for securing rails. Minimize

SEA DOG 7560125

SEA DOG 7560205

The all new injection molded fiberglass nylon winch handle ... Read more

The all new injection molded fiberglass nylon winch handle is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Both sizes feature ball bearings in the handle to ensure smoother action under load. MP Master List Minimize

Sold by the pair.

Sea Dog -420121-1 TOGGLE SWITCH LIT TIP ON/OFFSEA DOGToggl ... Read more

Sea Dog -420121-1 TOGGLE SWITCH LIT TIP ON/OFFSEA DOGToggle switchs for the marine enviroment. 12 volt 15 AMP. Use for replacement or new installations. Lighted tip. Minimize

Seadog Eye and Jaw Swivels are cast in 316 stainless steel ... Read more

Seadog Eye and Jaw Swivels are cast in 316 stainless steel with a 304 stainless pin, and have a safe working load of 9,000 Lbs. Minimize

Designed for leech line tensioning and other small line app ... Read more

Designed for leech line tensioning and other small line applications. The CL221 is supplied complete with shield, backing plate and rivets Other cleats are available with or without backplates and rivets The CL212A shield prevents the CL212 snagging in shrouds or other parts of the rigging The CL212BP backplate and rivets (special order), can be used with the CL212 and the CL241 CL233 reuires separate backing plate (CL233BP, special order) Approximate dimensions: 13/16 x 2- 3/4 Part numbers ending in -1 represent retail packaging Cleats & Chocks Minimize

Sea-Dog stainless 100 series eye nuts (numbers 078106 - 078 ... Read more

Sea-Dog stainless 100 series eye nuts (numbers 078106 - 078112) have NC threads. These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accomodate varying bulkhead or transom thickness. Minimize

Stainless steel housing with pre-wired 12 volt 35 watt seal ... Read more

Stainless steel housing with pre-wired 12 volt 35 watt sealed beam bulb. Light Bulbs Minimize

The ultimate step at a very competitive price. Unique des ... Read more

The ultimate step at a very competitive price. Unique design locks steps in a rattle-free upright position when not in use Provides 4- 1/4 of sawtooth edged support for secure footing when working on the mast Can also be used in many other areas where an additional step is needed but available space is minimal MP Master List Minimize

Kitesurf Bar Cleat fits on Kitesurf bars for tensioning bra ... Read more

Kitesurf Bar Cleat fits on Kitesurf bars for tensioning brake lines. It can also be used on tubing where a cleat may berequired. Can be used on Bars or tubing up to 1- 13/16. All hardware included.A: 15⁄16"B: 2-1⁄2"C: 5⁄8"Finish: SilverLine Size: 3⁄16" to 5⁄16"Packaging: Single Minimize

SEA DOG 7271323

316 Stainless steel cast D shackles.

Model 420486 Magneto, red cap]: Circuit is normally open (n ... Read more

Model 420486 Magneto, red cap]: Circuit is normally open (not complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is closed (complete), allowing grounding to a suitable ground such as a grounding block, the battery, or a suitable area on the engine itself. Model 420487 Ignition, grey cap: Circuit is normally closed complete with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open not complete, resulting in interruption of current to ignition and shutting off engine. MP Master List Minimize

Wiper features stainless steel cover with matte black crack ... Read more

Wiper features stainless steel cover with matte black crackle non-reflective finish. Shown with optional arm and blade, which are not included Pre-wired for 12 volt DC electrical systems Boat Windshield Wipers Minimize

Price is for Each.MPN: 424800-1.Breaker Panel, 6-Gang, Vert ... Read more

Price is for Each.MPN: 424800-1.Breaker Panel, 6-Gang, VerticalSeaDog NYLON CIRCUIT BREAKER PANEL 424800-1.Supplied with 2-3 amp, 2-6 amp, 1-8 amp and 1-10 amp thermal AC/DC circuit breakers. Additional sizes available. Panel rating: 12V, 40 amps total. Individual circuits: 10 amps maximum. Meets CE specifications. An assortment of preprinted labels included. Dimensions: 6-1/2"H x 4-1/2"W.Price is only for Item# LJ-3164013: SeaDog NYLON CIRCUIT BREAKER PANEL 424800-1.NOTE: International delivery is not available except Canada. Minimize

Mounting holes are in a triangular pattern: 1- 7/8 C to C ... Read more

Mounting holes are in a triangular pattern: 1- 7/8 C to C at base, altitude of 5- 1/2 (6 inches from the back edge). Minimize

90 Degree grade 316 stainless steel rail fittings install u ... Read more

90 Degree grade 316 stainless steel rail fittings install using standard number 10 fasteners and feature 1/4 in. set screws for securing 1 in. rails. Minimize

Rail mount flagpole holder attaches to either 7/8 or 1 tub ... Read more

Rail mount flagpole holder attaches to either 7/8 or 1 tubing Flagpole is made of highly polished, heavy wall stainless steel tubing The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips, which are designed to hold their shape after continued use Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags Flag not included MP Master List Minimize

Rail mount flagpole holder attaches to either 7/8 or 1 tub ... Read more

Rail mount flagpole holder attaches to either 7/8 or 1 tubing Flagpole is made of highly polished, heavy wall stainless steel tubing The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips, which are designed to hold their shape after continued use Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags Flag not included MP Master List Minimize

SEA DOG 7271373

Meets Coast Guard, ABYC and NMMA requirements with a minimu ... Read more

Meets Coast Guard, ABYC and NMMA requirements with a minimum of 200 cm mouth opening and striker mass no less than 3 of mass of the bell. Mounting bracket included. Minimize

SeaDog rail fittings feature the highest quality 316 grade, ... Read more

SeaDog rail fittings feature the highest quality 316 grade, stainless steel. The use of 316 stainless ensures the best possible corrosion protection and exceptional strength. Fittings use two set screws to secure rails. Minimize

SEA DOG 7271473

Sea-Dog Line Heavy Duty Butt Hinge - S.S. BUTT HINGE 6X6 PI ... Read more

Sea-Dog Line Heavy Duty Butt Hinge - S.S. BUTT HINGE 6X6 PIN ON TOP *EA* Minimize