> Miscellaneous > global technology/store amazon

Global Views has been a design leader in home decor for yea ... Read more

Global Views has been a design leader in home decor for years. You’ve seen their products featured in many home decorating and magazines including O at home, Elle Decor, Metropolitan and Domino. Global Views is proud to have its products included in furnishings for the Golden Globe Awards, the Apprentice, SAG party and Extreme Makeover Home Edition. Colee Hammock Home is excited to bring the unique look, comfort and style of Global Views to you.The Origami Table is made of hardwood with zebra wood veneer and a walnut color finish.Dimensions: 23"Dia x 24"H Minimize

Brand New Amazon Kindle 3 3G+Wifi Reading Device in White 6 ... Read more

Brand New Amazon Kindle 3 3G+Wifi Reading Device in White 6" Display + New E Ink (Pearl) + Sponsored Screensaver Comes with U.S. power adapter (110V-240V), USB 2.0 cable rechargeable battery Standard shipping is for Las Vegas area local delivery only We offer US overnight shipping and worldwide expedited shipping .Overnight within Continental USA Priority/Express Shipping Worldwide We also have Kindle 3G in Black at the following link Amazon Kindle 3G in Black Special Offers Sponsored Screensav Minimize

The Global Specialties Model RC-10 is a high quality Resist ... Read more

The Global Specialties Model RC-10 is a high quality Resistor and Capacitor Substitution Box. The RC-10 provides a convenient selection of standard resistor and capacitor values available either separately or in series or parallel RC combinations. The unit includes 36 resistors ranging in value from 15 Ohms to mega ohms, and 18 capacitors from 100 Pico farads to 0.22 micro farads. Both resistors and capacitors have a 10 percent tolerance and resistors have a power rating of one watt. The capacitors have a voltage rating of approximately 600 volts. Typical applications for the RC-10 include component substitution in servicing and circuit design applications, and establishing RC circuits for checking impedance, reactance, and frequency characteristics. The unit is also useful for classroom applications to demonstrate Ohm's Law, capacitive reactance, and other circuit effects caused by introducing various resistance and capacitance combinations. The RC-10 comes with plug-in test leads with convenient alligator clip connectors. Resistance: All resistors in the RC-10 are rated at 1 Watt. Do not exceed this power level. The resistance selector or "R" switch has 18 positions with a HI/LO selector switch for each position, providing a total of 36 resistance values. The resistor values on the "R" selector switch with no letter following are expressed in Ohms. For example, the value marked "100" indicates 100 Ohms. Capacitance: The capacitors in the RC-10 have a voltage rating of 600 volts. Do not exceed this rating. The RC Circuit Box provides a selection of 18 capacitance values. Note the capacitance values on the right side of the "C" switch are in microfarads, corresponding to 0.000001 farad. Values on the left side of the switch are in picofarads (pf),corresponding to 0.000001 microfarads. Minimize

New Kindle DX Graphite, Free 3G, 9.7" E Ink Display, 3G Wor ... Read more

New Kindle DX Graphite, Free 3G, 9.7" E Ink Display, 3G Works Globally All New, High Contrast E Ink Pearl Screen: Our graphite Kindle DX display uses the latest generation E Ink Pearl technology with 50% better contrast for the clearest text and sharpest images Beautiful Large Display: The 9.7" diagonal E Ink screen is ideal for a broad range of reading material, including graphic-rich books, PDFs, newspapers, magazines, and blogs Read in Sunlight with No Glare: Unlike backlit computer or LCD s Minimize

Global Urban Analysis provides a unique insight into the co ... Read more

Global Urban Analysis provides a unique insight into the contemporary world economy through a focus on cities. It is based upon a large-scale customised data collection on how leading businesses use cities across the world: as headquarter locations, for finance, for professional and creative services, for media. These data - involving up to 2000 firms and over 500 cities - provide evidence for both how the leading cities, sometimes called global cities, are coming to dominate the world economy, and how hundreds of other cities are faring in this brave new urban world. Thus can the likes of London, New York and Hong Kong be tracked as well as Manchester, Cleveland and Guangzhou, and even Plymouth, Chattanooga and Xi'an. Cities are assessed and ranked in terms of their importance for various functions such as for financial services, legal services and advertising, plus novel findings are reported for the geographical orientations of their connections. This is truly a comprehensive survey of cities in globalization covering global, world-regional, and national scales of analysis: - 4 key chapters outline the global structure of the world economy featuring the leading cities; - 9 regional chapters covering the whole world also feature the level of services provided by 'medium' cities; - 22 chapters on selected countries and sub-regions indicate global-ness and local-ness and feature an even wider range of cities. Written in an easy to understand style, this book is a must read for anybody interested in their own city in the world and how it relates to other cities. Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

The PB-502 Advanced Logic Design Trainer is a portable robu ... Read more

The PB-502 Advanced Logic Design Trainer is a portable robust instrument capable of satisfying many requirements arising in the design and study of digital logic circuitry. The PB-502's selectable operating voltage further aids its versatility by allowing the trainer to be used in either TTL or CMOS operating mode, The trainer contains three integral power supplies and input/output devices that simplify the construction of a wide range of circuits. Typical circuits that can be built on the PB-502 include, operational amplifiers, comparators, A to D converters, gates and counters. The PB-502 can also interface directly to a microprocessor. The PB-502 is housed in a tough, molded plastic carrying cases with an integral hinged cover which stacks neatly for storage. Typical experiments and circuits that can be design utilizing the PB-502 include, but are not limited to the following. +12 volts + 5 percent 200mA max.-12 volts +5 percent 200mA max.+5 volts +5 percent 250mA max. Selectable output voltage of clock, pulser, logic switches. Input voltage thresholds of seven segment displays, logic indicators and Vcc tie point between 5 volts, TTL: and 12 volts, CMOS. 1 Hz +20 percent; 1 kHz +20 percent. 100 kHz +20 percent. Also user variable with external capacitor. Logic "1" output current 2mA at 4.0V min. (5 V/TTL); 4mA at 11.0 V min. (12 V/CMOS). Logic "0" output current 2mA at 0.1V max. (5 V/TTL); 5 mAat0.1V max (12 V/CMOS). Two fully debounced pushbuttons with true logic and complementary outputs. Logic "1" output current 2 mA at 2.5 V min. (5 V/TTL); 2 mA at11.0 V min. (12 V/CMOS)Logic "0" output current 2 mA at 0.4V max. (5 V/TTL); 5 mA at 0.4Vmax (12 V/CMOS). 8 SPDT switches select output of Vcc or ground. Output current, all cases: 200 mA max. 8 LEDs buffered by two four-bit latches with separate enables. Input impedance, all inputs: 100 k ohms. Measures 7-1/2" width by 2-19/32" height by 10" depth. Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

Technology and Global Change describes how technology has s ... Read more

Technology and Global Change describes how technology has shaped society and the environment over the last 200 years. Technology has led us from the farm to the factory to the internet, and its impacts are now global. Technology has eliminated many problems, but has added many others (ranging from urban smog to the ozone hole to global warming). This book is the first to give a comprehensive description of the causes and impacts of technological change and how they relate to global environmental change. Written for specialists and nonspecialists alike, it will be useful for researchers and professors, as a textbook for graduate students, for people engaged in long-term policy planning in industry (strategic planning departments) and government (R & D and technology ministries, environment ministries), for environmental activists (NGOs), and for the wider public interested in history, technology, or environmental issues. Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

The 4005 is designed to be used as a function generator, sw ... Read more

The 4005 is designed to be used as a function generator, sweep generator, pulse generator and a frequency counter, offering a wide range of applications in both analog and digital electronics such as engineering, manufacturing, servicing, education and hobbyist fields. Display indicates, gate time, MHz, KHz, Hz, mHz. Waveforms: sine, square, triangle, skewed sine, pulse, ramp saw tooth, TTL/CMOS leveled square, DC. Frequency range: 0.05Hz to 5MHz in 7 Ranges (5, 50, 500, 5K, 50K, 500K, 5M). Frequency accuracy: +/- 2 percent (5, 50, 500, 5K, 50K, 500K, 5MHz Range, Full Scale). Output level: sine and triangle wave: 20 Vpp in open circuit, 10 Vpp into 50 load square wave: 19 Vpp in open circuit, 9.5 Vpp into 50 Load. Output impedance: 50 +/-5 percent. Attenuate: -20 dB fixed and continuously variable (more than -20dB). Sine wave: +/- 3dB to 5 MHz (more than 14Vpp). Square wave: Less than 25 nS (at 5MHz). Triangle wave: more than 99 percent at 0.5 Hz to 100 KHz. TTL output: -Rise and Fall Time: Less than 30 nS (at 1MHz). CMOS output: -rise and fall time : less than 180 nS (at 1MHz). Duty ratio: 1:1 to 10:1. Mode: linear. Width: variable from 1:1 to 100:1. Rate: 0.5 Hz to 50 Hz (20 mS to 2 S). External VCF input input voltage: 0 to 10 V. Input impedance: approximate 1 K. Display: 6 digit seven segment green LED, gate time, MHz, KHz, Hz and mHz. Frequency range: 2Hz to 50 MHz with auto range. Accuracy: +/-Time base Error +/- 1 count. Time base: 10 MHz crystal oscillator, +/-20ppm. Input sensitivity: 200 mVrms (2Hz to 100Hz), 100mV rms (100Hz to 50MHz). Input impedance: 50. Maximum input voltage: 250 Vpp. Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

These styrene faux tin style thermoformed panels look the s ... Read more

These styrene faux tin style thermoformed panels look the same as metal ones for a fraction of the cost. They can be used on ceilings, walls, and backsplashes. The copper, silver, and bronze panels are a solid color throughout to prevent any chipping, peeling, or cracking, providing a washable and durable surface. Install panels on any clean, dry, and flat surface with panel adhesive. Loctite Power Grab All Purpose adhesive, model No. 1589155, SKU 273570, works well. For popcorn type ceilings, use a shop-vac to remove large knobs and loose particles. Panels overlap with the next so there are no visible seams. Cut with a fine tooth blade, knife, or scissors. The matte white panels can either be left white or simply and inexpensively painted with an oil-based or latex paint to match your decor. Panels are Class A fire-resistant. 2' x 4' (actual panel size is 24.5" x 48.5" to allow for overlap). Eco-friendly. Made in U.S.A. No. 204: 6" design pattern, white No. 204-01: 6" design pattern, copper No. 204-02: 6" design pattern, silver No. 204-03: 6" design pattern, bronze No. 207: 6" design pattern, white No. 207-01: 6" design pattern copper No. 207-02: 6" design pattern, silver No. 207-03: 6" design pattern, bronze No. 209: 6" design pattern, white No. 209-01: 6" design pattern, copper No. 209-02: 6" design pattern, silver No. 209-03: 6" design pattern, bronze No. 309: 12" design pattern, white No. 309-01: 12" design pattern, copper No. 309-02: 12" design pattern, silver No. 309-03: 12" design pattern, bronze No. 309-04: 12" design pattern, antique brass No. 320: 12" design pattern, white No. 320-01: 12" design pattern, copper No. 320-02: 12" design pattern, silver No. 320-03: 12" design pattern, bronze No. 320-04: 12" design pattern, antique brass No. 321: 12" design pattern, white No. 321-01: 12" design pattern, copper No. 321-02: 12" deign pattern, silver No. 321-03: 12" design pattern, bronze No. 321-04: 12" design pattern, antique brass Minimize

The Global Specialties model 1504 variable AC power source ... Read more

The Global Specialties model 1504 variable AC power source is designed for modern electronic laboratories needing a clean, electronically and galvanically isolated variable line supply. The Model 1504 has a single range output from 0-150VAC at 4 Amps of continuous current and features a super isolation transformer which is triple shielded from the input line for maximum protection against shock hazard. A convenient front panel plug accepts a probe for measuring leakage current up to 9.99mA. The 1504 is overload protected with a fuse and a separate output switch. Rack mounting is achieved by sliding away the side panels which expose channels in the instrument's chassis. The accuracy, superior quality and safety features of the 1504 make it perfect for research and development laboratories, medical facilities, plant maintenance, manufacturing and educational institutions. Galvanic leakage less than 10uA. 120dB attenuation for common mode noise. Input frequency: 47 Hz to 65 Hz. Output line isolation: capacitive coupling to 0.0005pF. Line to output leakage: Better than 120dB (common mode noise). Output voltage range: single 0-150 VAC. Range load current: single: 0-4A continuous. AC line voltage: 115V nominal. Output frequency: same as input frequency. Input protection: 1.4 in Fuse 8A. Output protection: fuse 8A. Accuracy: +/-3 counts. Controls: power on/off, volt adjustable, meter function mA (leakage test), V, A. Minimize

The Global Specialties model 1302-B power supply is a fully ... Read more

The Global Specialties model 1302-B power supply is a fully regulated triple output power source designed to meet virtually all DC voltage requirements. It is an indispensable tool for product development, testing, quality control, servicing, and education. This power supply is especially useful for analog and digital circuit design, offering a fixed/variable 5VDC output which is optimal for TTL applications. The two main outputs are continuously variable from 0 to 32V and can supply 2A maximum each. They can be operated in constant voltage or constant current modes. Automatic overload protection is achieved by fast transition from CV to CC mode and may be set at any point in the voltage or current range. Separate front panel meters are provided to monitor output voltage and load current for the 32V sections. Switch selection is provided to enable either voltage or current monitoring for each section. In addition, a separate 5V output is provided with variation from 4.5VDC to 5.5VDC maximum and maximum current of 5A fold back current limit. The output voltage and current limit settings of the 0-32V outputs can be varied manually using front panel controls. All of the outputs are floating neither the output positive terminal nor the negative terminal (nor any point within the regulator circuitry) is connected to ground. The power supply is designed to operate in ambient temperature of up to 40 degree C and full output may be drawn continuously provided free air circulation is allowed. The unit is available either in 110-120VAC at 60Hz or 220-240VAC at 50Hz. Triple output, two 0-32V at 2A and one 5VDC (variable from 4.5VDC to 5.5VDC) at 5A. Two digital readouts monitor current or voltage. Heavy duty transformer isolated design. Output voltage 1 and 2: 0-32DC continuously variable). Load current 1 and 2: 0-2A maximum (continuously variable). Minimize

The Quantum Q-SX1 Satellite Tracker by JustGPSTracking prov ... Read more

The Quantum Q-SX1 Satellite Tracker by JustGPSTracking provides the perfect GPS tracking solution for law enforcement, government agencies and private companies who move assets through remote regions of the world. Small and compact and extremely rugged, the Q-SX1 tracking system uses a satellite-based system that is completely independent of cell phone networks. This tracker is therefore capable of relaying positioning coordinates from virtually anywhere on the Earth's surface. Unlike traditional Active GPS Trackers, the Q-SX1 doesn't rely on cellular 3G networks for transmitting location information. This means you don't have to worry about "dead spots" which would ordinarily interrupt your real-time monitoring capabilities. The Q-SX1 GPS satellite system accomplishes this by using Globalstar's simplex satellite network. Now you can more consistently follow the movements of your valuable assets as they traverse the deserts, jungles and oceans of the world. The Q-SX1 satellite tracker's battery life is so lengthy that its effective longevity is measured in years. Since you control the rate at which the GPS tracking device broadcasts its positioning updates, you can maximize the battery life to the extent needed for your particular tracking application. This makes it an ideal tracking solution for long life, low maintenance operations. Minimize