> Miscellaneous > CRL

The CRL Hand-Held Spot Bulb UV Curing Lamp provides up to a ... Read more

The CRL Hand-Held Spot Bulb UV Curing Lamp provides up to a 40mW/cm² of UV-A energy to cure all of our UV Adhesives in just seconds. Perfect for fabricating with our UV Bonded Hardware components, it's unique filter provides maximum curing energy while minimizing the hazardous radiation inevitably produced by all high-intensity UV-A lamps. Minimize

Works With Both 2-9/16" and 2-3/4" (65 and 70 mm) Pivot Set ... Read more

Works With Both 2-9/16" and 2-3/4" (65 and 70 mm) Pivot Setback Patch Fittings High Density Cast Body Gaskets for use with 3/8" or 1/2" (10 or 12 mm) Glass The CRL Double Transom Patch with Support Fin Bracket is designed to provide two top pivoting points for side-by-side double doors with either a single lite or double lite split transom. It comes with two INT300 Inserts for mounting doors with CRL's PH20A or PH21A Top Door Patch Fitting. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturer's Manual), and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.GLASS FABRICATION REQUIRED: FOR SPLIT TRANSOM (Two Lites of Glass): Four 3/4 inch (19 millimeter) Diameter Hole and Three Corner Notches. FOR SINGLE TRANSOM (One Lite of Glass): Four 3/4 inch (19 millimeter) Diameter Holes, One Corner Notch and One U-Cutout.Important Notes NOTE THESE FITTINGS ARE NOT FOR USE WITH LAMINATED GLASS. Minimize

Can not be shipped by UPS, FedEx - Common Carrier Only. Cal ... Read more

Can not be shipped by UPS, FedEx - Common Carrier Only. Call for shipping quote. 888-663-9830 Select From Manual, Semi-Automatic and Fully Automatic Operation  Low Voltage 24V DC System UL/CSA Approved Class Two Transformer CRL Bi-Fold Service Windows are perfect anywhere a high quality bi-folding window is required. Features include two panels that simultaneously open outward towards the customer and a burglar bar for extra security. Projected and Flush Mount models are available in three different configurations: MANUAL - Both panels move simultaneously as either panel is manually operated. SEMI-AUTOMATIC - Opening the window is achieved by pushing on the hip activated slide bar. Step away from the window and the two panels automatically close. FULLY AUTOMATIC - Opening the window is as easy as stepping in front of the built-in infrared sensing device. Simply step away and the two panels automatically close. The Automatic/Off/Manual Switch provides three different settings: AUTOMATIC operates with the infrared sensing device; MANUAL operates with a jamb mounted push button; OFF defeats all functions and closes the two panels. UL/CSA Approved Class 2 Transformer. Color: Duranodic Bronze Overall Size: 27-3/4 in (705 mm) Wide x 40 in (1016 mm) High Service Opening Width: 15 in (381 mm) Service Opening Height: 25 in (635 mm) Specifications: Materials: Aluminum Extrusion; Pile Weatherstrip; Glazing Vinyl; Stainless Steel Shelf or Stainless Steel Sill Glazing: 1/4 inch (6 millimeter) Clear Tempered Glass Stock Finishes: Satin Anodized or Duranodic Bronze Bi-Fold Configuration: Fully Automatic; Self-Closing; Manual To Determine Rough Opening: Add 1/2 Inch (12.7 millimeter) to Width, 1/4 Inch (6.4 millimeter) to Height Controls: Infrared Sensing Device and Manual/Off/Automatic Switch Included in Stainless Steel Shelf (attached). Jamb Mounted Push Button Minimize

See How Our GlassWedge System Works Save 50% Off Labor Time ... Read more

See How Our GlassWedge System Works Save 50% Off Labor Time This CRL B5S Series Standard Square Aluminum Base Shoe is used as the base channel for glass railing systems. It can be clad in five choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Aluminum Base Shoe to the substrate. CRL has engineered and tested a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. The five tested methods of attachment can be found on pages R10 to R11 , and associated fasteners are shown on pages R12 to R13 . A printed brochure with Instructions, Installation Hints, Cleaning, and Refinishing techniques is available. All heavy aluminum base shoes have a stock length tolerance of plus or minus 3/4 inch (19 millimeter) CAPACITY: 1/2 inch (12 millimeter) Thick Glass when using GlassWedge® Dry Glaze System; 1/2 or 5/8 inch (12 or 16 millimeter) Thick Glass when using Wet Glaze System For Test Results and Drilling Recommendations, click here . NOTE: 20 feet (6.10 meter) Extrusion Only (without holes) cannot be used for the GlassWedge® Dry Glaze System unless the Base Shoe is fabricated to the above tested and approved hole and counter bore pattern. The GlassWedge® Dry Glaze System requires that the attachment holes be counter bored so that no part of the fastener protrudes above the base of the channel opening. SHIPPING NOTE: Due to the difficulty in packaging and handling 20 feet (6.10 meters) stock lengths, it is suggested that you Will Call these at any of our distribution centers. If requiring shipment, all packaging and handling concerns must be agreed to by CRL and the customer prior to shipping. All shipping arrangements will be documented on your quotation for your signed approval. Minimize

Provides Excellent Cut Protection Full Zipper Front The CRL ... Read more

Provides Excellent Cut Protection Full Zipper Front The CRL Kevlar® Eisenhower Jacket was designed for the safety of the glass worker in mind. Anyone working in the glass industry is presented with the dangers of glass on a daily basis. Wearing the proper safety gear is required in order to safely carry and install glass. This jacket is made from 8 ounce Kevbest™ Kevlar® which is many more times cut resistant than comparable materials of the same weight. Great for cooler climates, this jacket can be worn over a sweatshirt or another light jacket if desired. The CRL Kevlar® Eisenhower Jacket has a zipper front for easy removal. The edges are bound for a neat, professional look. Great for window factories, too. This is something that no glazier should be without. This jacket is used as a safety device for handling glass. It is to be used in conjunction with other safety gear like protective eyewear, gloves and footwear. Always use caution when working with and carrying glass. Chest Size: 36 in - 38 in (914 mm- 965 mm) Minimize

The Standard for Service Life and Dependability Made to the ... Read more

The Standard for Service Life and Dependability Made to the Industry Standard 18 x 16 Mesh Size Also Available in Bright Aluminum and Glossy Black Colors Charcoal Aluminum Screen Wire is rust and corrosion resistant. Its an easy to install, consistent weave, high quality screening suitable for most door and window applications. The strong aluminum material is rigid enough to hold its shape during fabrication and the seasonal installation and removal cycles common to many parts of the country. Color: Charcoal Aluminum Width: 38 in (965mm) Length: 100 ft (30.5m) Mesh Size: 18 x 16 Minimum Order: 1 Roll Minimize

Transparent Polymer Coating. Water, Soil and Stain Repellan ... Read more

Transparent Polymer Coating. Water, Soil and Stain Repellant. Protects Glass and Many Other Surfaces. Click Here for Tips on How To Use TPC16 CRL TPC Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass and marble to make the surface water, soil and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, CRL TPC Surface Protector Permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement.Simply spray on and polish off. One fluid ounce (29 milliliter) of TPC Surface Protector protects approximately 15 square feet (4,572 square millimeters) of glass. Contents of Container: 16 fl oz (473 ml) pump spray bottle Important Note: Check label and Material Safety Data Sheet for any additional limitations and warnings. PROCEDURE FOR THE EFFECTIVE TREATMENT OF SAND-BLASTED GLASS 1. Due to the variable nature of the sandblasting process (i.e. different grit size and blasting pressure resulting in variable depth, etching configuration and amount of residual glass particles), before treatment with CRL TPC SURFACE PROTECTOR, sandblasted glass must be thoroughly washed and dried. 2. The CRL SURFACE PROTECTOR must be applied using a strong, padded cloth and a firm, circular and overlapping motion. The product should be allowed to dry (haze) and then it should be reapplied to ensure complete coverage. 3. When the surface is dry (i.e., the final "haze" has formed), the surface should be sprayed with plain water to test for uniform water beading. When the applicator is satisfied that the "beading" is uniform, the surface should then be washed with a mild detergent solution or an alcohol and water solution to remove all excess polymer (this "excess" is what sometimes Minimize

Black Powder-Coated Frame with 31% Dark Gray Glass Half-Sli ... Read more

Black Powder-Coated Frame with 31% Dark Gray Glass Half-Sliders with Optional Horse Guards CRL Horse Trailer Side Slider Windows have black frames, standard 31% dark gray glass and fixed fiberglass screens. All CRL Horse Trailer Windows are universal (left or right hand) with 1-1/2 to 2 inch (37 to 50 millimeters) wall thickness, and are fitted with conventional outside pull handles. The Interior Trim Ring is also reversible for 1/8 inch (3 millimeters) skin mount applications. Horse Guards are internal clamp rings fitted with 1/2 inch (13 millimeters) diameter tubing, and are designed to fit our CRL Horse Trailer Side Sliders. Optional inside security latch provided. Outside Frame Dimensions: 31-1/4 x 15-1/4 in (540 x 387 mm) Cut Out Dimensions: 30 x 14 in (508 x 356 mm) Clamp Ring/Angles: 1-1/2 to 2 in (37 to 50 mm) Reversible for 1/8 in (3 mm) - Rectangular 90°/90° WARNING: These windows are not for retrofit applications. FOR NEW INSTALLATION ONLY Minimize

amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp ... Read more

amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp Minimize

Translucent Vinyl Bulb Seal with Pre-Applied Tape for 7/32" ... Read more

Translucent Vinyl Bulb Seal with Pre-Applied Tape for 7/32" Gap 98" Long Pre-Applied Tape for Easy Installation Labor Savings Due to Pre-Application of Tape Stocked in 98" (2.49 m) Lengths Our popular CRL SDTB Bulb Seal is now available with pre-applied Hi-Bond Tape, for ease of installation and substantial labor savings. Simply peel back the thin tape lining to expose the clear tape.Stock Length: 98" (2.49 m)Maximum Gap: 7/32" (5.6 mm) Part Number: SDTBT2-1 PAYMENT POLICY: We accep Minimize

Transparent Polymer Coating. Water, Soil and Stain Repellan ... Read more

Transparent Polymer Coating. Water, Soil and Stain Repellant. Protects Glass and Many Other Surfaces. Click Here for Tips on How To Use TPC16 CRL TPC Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass and marble to make the surface water, soil and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, CRL TPC Surface Protector Permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement.Simply spray on and polish off. One fluid ounce (29 milliliter) of TPC Surface Protector protects approximately 15 square feet (4,572 square millimeters) of glass. Contents of Container: 16 fl oz (473 ml) pump spray bottle Important Note: Check label and Material Safety Data Sheet for any additional limitations and warnings. PROCEDURE FOR THE EFFECTIVE TREATMENT OF SAND-BLASTED GLASS 1. Due to the variable nature of the sandblasting process (i.e. different grit size and blasting pressure resulting in variable depth, etching configuration and amount of residual glass particles), before treatment with CRL TPC SURFACE PROTECTOR, sandblasted glass must be thoroughly washed and dried. 2. The CRL SURFACE PROTECTOR must be applied using a strong, padded cloth and a firm, circular and overlapping motion. The product should be allowed to dry (haze) and then it should be reapplied to ensure complete coverage. 3. When the surface is dry (i.e., the final "haze" has formed), the surface should be sprayed with plain water to test for uniform water beading. When the applicator is satisfied that the "beading" is uniform, the surface should then be washed with a mild detergent solution or an alcohol and water solution to remove all excess polymer (this "excess" is what sometimes Minimize

For 3/8" or 1/2" (10 or 12 mm) Glass This CRL Transom Mount ... Read more

For 3/8" or 1/2" (10 or 12 mm) Glass This CRL Transom Mounted Patch Connector with Support Fin Bracket is used on one or two lite transoms that require additional lateral support to achieve the desired structural strength. The support fin glass should be sized to approved design criteria (refer to GANA or Manufacturer's Manual), and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.GLASS FABRICATION REQUIRED: Four 3/4 inch (19 millimeter) Diameter Holes.Important Notes NOTE THESE FITTINGS ARE NOT FOR USE WITH LAMINATED GLASS. Minimize

Made to Secure Bullet Resistant 1-1/4 Inch (32 mm) Acrylic ... Read more

Made to Secure Bullet Resistant 1-1/4 Inch (32 mm) Acrylic or Polycarbonate Barrier Systems in High-Security Applications Made of High Quality Stainless Steel to provide Reliable Security Available in a variety of Finishes to Provide an Attractive Design to your Installation This CRL Top or Mid-Mount Clamp is made of secure bullet resistant acrylic or polycarbonate buttress or baffle panels. Two screws These CRL Surround Sound Spacers are designed for use with bullet resistant acrylic or polycarbonate. Spacers secure a secondary glazing panel behind a primary glazing panel to provide natural voice communication. Two different styles are available. The PB011, with square end caps, is used if you want to match other CRL Barrier Clamps. The CDS3S 1-1/4 Inch (32 millimeter) Round End Caps, are used if you want to add a different look to your application. Color: Polished Stainless Width: 2 in (51 mm) Height: 2 in (51 mm) Minimum Order: 1 Each Minimize

C.R. LAURENCE AP1429 CRL White 14" x 29" All Purpose Access ... Read more

C.R. LAURENCE AP1429 CRL White 14" x 29" All Purpose Access Panel. This CRL All Purpose Access Panel is ideal for use anywhere access into a wall is required. Many times plumbing leaks, cable runs, or area access requires a hole being made in the wall. With this panel, an easy cover up can be done without having to re-drywall. Simply cut the hole and install the outer frame with fasteners or construction adhesive and then snap in the door.. Minimize

Flush Type for Metal Doors Up To 1/8" (3.2 mm)Thick These C ... Read more

Flush Type for Metal Doors Up To 1/8" (3.2 mm)Thick These CRL Molly Jacknut Anchors are a regular type fastener without prongs that will hold fixtures securely in hollow core flush doors. They even work in as small an expansion space as 3/8 inch (9.5 millimeter). Minimize

CRL Large Single Eyelet Safety Swivel Metal Type Hanger (10 ... Read more

CRL Large Single Eyelet Safety Swivel Metal Type Hanger (100 Pack) CRL"s Safety Swivel Metal Hangers are designed to accommodate a variety of load sizes and capacities. Fabricated with solid seamless eyelets and a zinc on steel finish. Packaged in quantities of 100 and 1000. Zinc Plated Steel to Resist Rust Packaged in Quantities of 100 and 1000 Solid Seamless Eyelets Catalog Number: 321 Also Available in These Catalogs: CRL53R Glass Glazing Catalog, PAGE 180G CRL23 Shower Door and Mirror Hardw Minimize

Removes Moisture from I.G. Units Standard Formula Small Siz ... Read more

Removes Moisture from I.G. Units Standard Formula Small Size is Great For Manufacturing Individual Units This CRL MSD Type Molecular Sieve is an all-purpose adsorbent for use in the fabrication of insulated glass units. It has an excellent capacity for adsorption of water and chemical vapors. MSD provides insulated glass fabricators with superior protection against fogging for a longer lasting unit. MSD is suitable for both cool and warm climates, and can be used for residential, architectural and commercial applications. CRL Molecular Sieve Adsorbent is cost effective because it costs less per drop of water removed than any other adsorbent. This means significant savings in unit production. CRL Molecular Sieve Adsorbent is recommended for use with CRL Desiccant Filling Machines and Spacers . Avoid prolonged skin contact when working with this product. Follow all warnings and precautions on the product packaging for details. Minimize

Formulated for Lead and Copper This self-cleaning CRL Solde ... Read more

Formulated for Lead and Copper This self-cleaning CRL Soldering Flux is formulated to use with lead or copper foil work. It is safe, and won't harm your skin. Size:  4 fl oz (118 ml) Minimize

This Guide snaps into rail Cat. No. 3800516 when hanger rai ... Read more

This Guide snaps into rail Cat. No. 3800516 when hanger rail is glazed at top and bottom of framed sliding panels. It centers panels in standard bottom rail Cat. No. 3800604. Two guides are required per panel. Natural color nylon. Comes ten guides per pack. Minimize

Universal Primer Required for a Secure Bond Use on Glass, P ... Read more

Universal Primer Required for a Secure Bond Use on Glass, Pinchweld, Bare Metal, EPDM/PVC Moldings Part of the LYNX Services Program 24 Page Technician Training Manual CRL/Somaca One Step Primer chemically reacts with the glass frit and urethane to provide a secure bond. Clean new glass first with PWR22 Automotive Glass Cleaner, and then apply One Step Primer to the frit with a lint-free wipe. Apply One Step Primer to bare pinchweld metal scratches or rust areas that have been properly repaired prior to priming. May also be used on glass supplied without black ceramic frit to improve adhesion. Cleaning and Primers 1. After removing all of the old urethane to within 1/16 inch (1.5 millimeter) of the pinchweld, prepare the pinchweld following the procedures outlined in the CRL Technicians Training Manual. Prime these areas with 1214006 One Step Primer. 2. Clean the inside of the windshield with a lint-free towel 1550 and PWR22 Automotive Glass Cleaner. 3. Apply 1214006 One Step Primer to frit area with a lint-free towel and allow primer to dry for a minimum of 10 minutes, but no more than 8 hours before installing adhesive. This procedure must be performed above 40°F (4°C). NOTE: One Step Primer must be used prior to any adhesive application to prevent glass displacement. Failure to do so may result in personal injury or property damage. 4. Apply 1214006 One Step Primer to encapsulated moldings if they are part of the bonding area. Color: Black Contents: 4 Fl Oz (125 ml) Shelf Life: 12 Months in Unopened Container Shelf Life Lynx Test: 5 Days After Opening Container and Re-Sealing After Each Use Ship Via: Hazardous Material - No Air Shipments Important Note: For use by trained applicators only. Please refer to C.R. Laurence Technician Training Manual Minimize

CRL Clear Single Toggle Switch Acrylic Mirror Plate CRL Acr ... Read more

CRL Clear Single Toggle Switch Acrylic Mirror Plate CRL Acrylic Mirror Switch and Outlet Cover Plates are made of high quality, 1/8" (3 mm) mirror-backed acrylic with high polished edges. Each plate is drilled for standard mounting screws (included), and are packed and shipped with peel-off scratch resistant film. There are 36 stock styles, all available in both clear and bronze mirror. CRL Acrylic Mirror Switch and Outlet Cover Plates are versatile, economical, and attractive. Flame retardant Minimize

Creates Seals Between Glass Panels Simple to Install - No A ... Read more

Creates Seals Between Glass Panels Simple to Install - No Adhesives Compatible With Laminated Glass CRL EZ GLAZE Soundstrip is an extruded silicone gasket designed to reduce sound, smoke and odors through glass to glass (butt) joints. Used in interior office spaces where tenants wish to utilize partial and full height glass partitions. Unlike wet glazing with silicone sealants, EZ GLAZE Soundstrip is easy to apply, and it will not adversely affect laminated glass which is commonly used in office spaces to reduce sound transmission. Can be installed from one side of the glass and will not bubble like silicone sealants. Available in clear or black and for 1/4" (6 mm), 3/8" (9.5 mm), and 1/2" (13 mm) thick glass. Recommended gap between the lites of glass is 1/4" (6 mm). Color: Clear Glass Thickness: 3/8" (9.5 mm) Roll Length: 100' (30.5 m) Minimum Order: 1 Roll Minimize

Easy to Install on Our P8060R Screen Table Kit Conveniently ... Read more

Easy to Install on Our P8060R Screen Table Kit Conveniently Stores Most Commonly Used Screen Wire and Retainer Spline Painted Steel Uprights and Top Brace, Supplied with 8 Eye Bolts and End Caps to Accommodate 3/4" Spindles Ship U.P.S. in One Carton The CRL Screen Table Tower Kit is the perfect addition to our new P8060R Screen Table . Simply slide your screen wire and rolls of spline onto spindles (3/4 inch electrical conduit stock works best) that you supply, and you will have your most commonly used screening materials right at your fingertips. The tower attaches to the P8060R Screen Table . Once assembled it stands 65 inches (165 centimeters) above the 36 inch (91 centimeter) high table top, giving you plenty of room for full rolls of screen wire and spline. It can accommodate Screen Wire up to 48 inches (121.9 centimeters) wide. This kit ships in one carton that can be sent to you via UPS. Minimize

  Several Popular Sizes and Finishes 3/4" (19 mm) Diameter ... Read more

  Several Popular Sizes and Finishes 3/4" (19 mm) Diameter Heavy Brass Tubing (1.5 mil Thick) New Economy Style The CRL BM Series Back-to-Back Tubular Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of a one pull for each side of the door (back-to-back). Color: Antique Brushed Copper Hole Spacing: 24 in (610 mm) Center-to-Center Minimum Order: 1 Each Specifications: 3/4 inch (19 millimeter) diameter brass tubing (1.5 mil thick) 1-1/4 inch (31.8 millimeter) diameter metal washers Glass Thickness Range: 1/4 to 1/2 inch (6 to 12 millimeter) Hole Diameter Required: 1/2 inch (12 millimeter) Center-to-Center Hole Spacing: 12 Inch Towel Bar = 12 Inches (305 millimeters) 18 Inch Towel Bar = 18 Inches (457 millimeters) 24 Inch Towel Bar = 24 Inches (610 millimeters) 30 Inch Towel Bar = 30 Inches (762 millimeters) Minimize

Powder Painted with Glass Use to Make Showroom and Tradesho ... Read more

Powder Painted with Glass Use to Make Showroom and Tradeshow Presentations Many Colors Available This Small 30 Inch X 12 Inch (762 x 305 millimeters) Display is for use in showrooms and tradeshows. Displays come pre-assembled complete with 1/4 inch (6 millimeter) clear tempered glass or pickets and a finished wood base. Minimize

C.R. LAURENCE L10BS CRL Brushed Stainless U-Channel Cap for ... Read more

C.R. LAURENCE L10BS CRL Brushed Stainless U-Channel Cap for 21.52 mm Glass- 3 m Long. CRL Low Profile U-Channel Cap Railing is designed for guard rail applications and is offered in two architectural finishes. The low profile design allows for a virtually unobstructed view. Use of our LR21PV Cap Railing Rubber Insert and 95CBL Silicone is required to achieve a secure and permanent bond.. Minimize

C.R. LAURENCE LR21PV CRL Black Flexible Rubber LR20 Series ... Read more

C.R. LAURENCE LR21PV CRL Black Flexible Rubber LR20 Series Cap Rail Insert for 21.52 mm Laminated Glass - 100" (30.5 m). This CRL Rubber Insert is designed for use with our L10 Series U-Channel Cap Railing. The flexible black rubber insert provides a barrier between metal and glass. CRL"s Cap Railing Rubber is also useful in temporarily aligning the glass panels until the final installation.. Minimize

Screened Opening for Insect Free Environment 4" and 6" (102 ... Read more

Screened Opening for Insect Free Environment 4" and 6" (102 and 152 mm) Models Available in Two Finishes Choice of Metal or Lucite Cover The CRL Covered Speak-Thrus are available with two styles of covers: all metal, or metal outer ring with lucite vision port. Both styles are screened to provide an insect free environment. These heavy duty units are available in satin anodized or duranodic bronze finishes. Both 4 and 6 inch (102 and 152 millimeter) sizes are made to be glazed in 1/4 inch (6 millimeter) glass. The four inch (102 millimeter) model requires a 3-1/2 inch (89 millimeter) diameter hole. The six inch (152 millimeter) model requires a 5-1/2 inch (140 millimeter) diameter hole. Color: Duranodic Bronze Overall Diameter: 6 in (152 mm) Opening Diameter: 4-1/2 in (114 mm) Hole Diameter Required: 5-1/2 in (140 mm) Minimum Order: 1 Each Minimize

Powder Painted with Glass Use to Make Showroom and Traderoo ... Read more

Powder Painted with Glass Use to Make Showroom and Traderoom Presentations Many Finishes Available This CRL Small Display Without Base is for used in showrooms and tradeshows. Displays come pre-assembled complete with 1/4 inch (6 millimeter) clear tempered glass or pickets. Minimize