> Miscellaneous > 10 10/store digital craze com

The BXW-10 subwoofer represents a significant step up from ... Read more

The BXW-10 subwoofer represents a significant step up from its predecessor the highly regarded BRW10. It's as compact as its forerunner but more potent in every respect. A new 10" C-CAM® driver and 200 watt Class-D power amplifier have been devised in tandem to provide class leading standards of control speed and punch. Featuring a new fully integrated switch mode power supply the new amplifier develops considerably more power than its predecessor adding grip and clean bass delivery below 30Hz. A range of beautiful vinyl wood finishes provides the superlative looks to complement its accomplished deep bass performance. Powerful compact active subwoofer. 10" C-CAM® driver 200W Class-D amplifier. Available in four vinyl wood finishes. Low Frequency Limit: 27 Hz Upper Frequency Limit: 40 – 150 Hz Variable Low Pass Filter Alignment: 12dB/Octave variable + 12dB Octave fixed @ 150Hz Amplifier Output: 200 W (RMS) Amplifier Classification: Class - D Digital amplifier with switch mode PSU Driver Compliment: 1 x 10” C-CAM® long throw driver Dimensions: (H x W x D) 320 x 320 x 330 mm (336mm high inc feet.) 12 5/8 x 12 5/8 x 13 inches (13 1/4 high inc feet) (Excluding grille) Input Impedance: 20 K ohms Standby power consumption: 0.17 watts (ErP certified) Mains Input Voltage: 110-120 Vac - 50-60Hz 220-240 Vac - 50-60Hz Factory region pre-set. Weight (Individual): 10.92 Kg (24 lbs) Minimize

The EQ-Max-10 is our best subwoofer for the money with a 10 ... Read more

The EQ-Max-10 is our best subwoofer for the money with a 10 inch woofer. The 390 watt dynamic amplifier accesses frequencies as low as 28 Hz while assisting your system frequencies up to 135 Hz at 3dB down while being wallet-friendly. You can choose to use the Auto-EQ function with a button on the remote control to optimize the bass sound to your room using digital technology and down-firing ports to decrease distortion. Select the movies jazz/classical games or R&B/rock listening preset with one button press on the remote. This 10 inch subwoofer delivers more power over a wider frequency range than our Impact 10" sub. This subwoofer comes in a black finish to match your furnishings or you can put it neatly inside custom cabinets too. Accessories Mic mic stand remote control Amplifier 390 watts Dynamic/195 watts RMS Power Auto On/Off Yes Cabinet Design Extended Excursion Down-firing por Color Black Dimensions: (H/W/D) 16.75” x 15.25” x 17” (includes feet and grille) (42.5 x 38.7 x 43.1 cm) HiPass Crossover 80 Hz 6 dB/octave LoPass Crossover 40 - 120 Hz adjustable (12 dB octave 24 dB ultimate) Phase Control 0 90 180 270 Degrees Removable Grille Yes Shipping Weight 55 lbs. (25 Kg) Voice Coil 2-Layer copper Minimize

SOLD INDIVIDUALLY... Order Stock # ASM99010 Built-In 120 Wa ... Read more

SOLD INDIVIDUALLY... Order Stock # ASM99010 Built-In 120 Watt Amplifier 10" Long Throw Woofer Auto Power Via Signal Sensing Cabinet Top Mounted Recessed Volume Control Magnetically Shielded Frequency Response: 32Hz - 200Hz LFE (Low Frequency Effects) Input Overload Protection Circuit Dual Voltage Switch 115/230v Dimensions: (H x W x D) 16 3/4"* x 13 1/4" x 16"** (425 mm x 337 mm x 407 mm) Weight: 35 lbs. (15.88kg) *Add 13/16" for feet (21 mm) *Add 13⁄16" for feet (21 mm)** Measurement does not include binding posts / banana plug connectors. Please allow another 4" (102 mm) for cable connections. On All Powered Floor Subwoofers “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell. Minimize

Velodyne's Digital Drive PLUS is the ultimate subwoofer in ... Read more

Velodyne's Digital Drive PLUS is the ultimate subwoofer in the world today. Reproducing the most challenging bass in movies music and computer games at less than ½% distortion the DD+ produces both the most powerful and dynamic bass as well as the subtleties of the deepest music. One-Touch Auto-EQ+ automates the seamless blend of subwoofer system and room Use your PC for manual adjustments and real time feedback of your bass performance The industry's lowest distortion bass - under .5% Sophisticated cone design for fast accurate motion Six-layer custom wound voice coil assures better heat dissipation Massive motor structure for amazing low-frequency energy Minimize

Sold individually...ASM93101 Woofer: 10" Injection Molded P ... Read more

Sold individually...ASM93101 Woofer: 10" Injection Molded Polypropylene Cone Woofer Mid: 2 1/2" Polypropylene Cone Uni-Pivot Midrange Tweeter: 1" Aluminum Dome Uni-Pivot Tweeter Timbre-Matched to All One Series Speakers Sensitivity: 90dB 1W/1m Power Handling: 140 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 13 7/8" x 6 5/8" (352.43 mm x 168.28 mm) Cut-Out Diameter: 12 1/2" (317.5 mm) U.S. Patent No. D419 561 & 6 101 262 Minimize

SOLD AS A PAIR...The Sib loudspeakers from Focal have quite ... Read more

SOLD AS A PAIR...The Sib loudspeakers from Focal have quite a history with home entertainment and have been one of the premiere choices for discerning listeners for a wide variety of applications ranging from small-scale stereo systems to high-complexity multi-channel surround sound arrays. No matter where and how would you happen to be using them the Focal Sib loudspeakers are sworn to deliver you a sonic performance way higher than you'd expect form such diminutive units. One most cool thing about the Focal Sib is the fact that they can go pretty much anywhere across the room thanks to their relatively small size and their bracket's almost infinite possibilities. The Sib comes with an included stand-wall mount that offers unlimited installation freedom from placing the speaker on a tabletop or shelf to installing it on a wall out of the way. The cabinet is made from super-strong ABS perfect from damping and its rounded-end shape helps breaking the stationary waves increasing the clarity of the acoustic response and minimizing the cavity coloration; the front perforated aluminum grille sports a rotating logo for a perfect appearance regardless of the positioning. This LCR loudspeaker sports a 2-way driver complement with a 5” mid-bass driver with Polyflex cones and rubber surround capable of reaching as low as 69Hz workable bottom-end and providing bright midrange response with vocals in music or in-movie dialogs as well. The 4-layer voice coils sport a very precise dynamics for minimal undetectable distortions even when driven hard. The tweeter runs with a 3/4” mylar dome and can effortlessly reach upper cutoff point at 35kHz for impressive performance with SACD and DVD-Audio as well. Type 2-way compact bass-reflex speaker Finish Jet Black Pearl White Drivers 13cm Polyflex mid-bass 3/4"(19mm) mylar tweeter dome Frequency response (+or-3dB) 75Hz - 20kHz Low frequency point 69Hz Sensitivity (2 83 V/1 m) 90dB Nominal impedance 8 Ohms Minimum impedance 4 Ohms Crossover frequency 3 500Hz Recommended amplifier power 15 - 75W Dimensions (HxWxD) 10-3/4 x 5-9/16 x 6-7/16" Net weight 4.6Ibs (2.1kg) Minimize

Focal’s nicely rounded Dôme 5.1 might be the most expensive ... Read more

Focal’s nicely rounded Dôme 5.1 might be the most expensive surround speaker package in its class but even before you hear it in action you get the feeling that every single penny is fully justified. The black lacquer finish combined with the die-cast aluminium surrounds gives the speakers a premium look and feel. Each satellite weights just under 2kg and the level of build quality is second to none. Brave souls can opt for red or white finishes and the intricate stand design lets you pivot the satellites through 90 degrees so wall-mounting won’t trip you up. Clever-clogs tweeters Twist and pop off the satellite grilles and you’ll see the Dôme’s two-way design. Focal uses a 10cm Polyglass cone for the midbass driver and a 25mm inverted dome tweeter. The company has gone for an inverted tweeter in the belief that it improves dispersion and helps to create a more precise soundstage. And it seems to bear fruit too. The domed subwoofer has a bullet-esque appearance which makes it stand out in the crowd. It’s a downward-firing design so it can hug on a wall or be placed in free space without affecting its sound. It uses a 100W digital/analogue hybrid BASH amplifier (BASH technology is used on all of Focal’s subwoofers). Doddle to set up Set-up is simple enough although as is the case with the majority of systems out there you need to feed cable into the base of each speaker and secure using an Allen key and bolts. You’ll also need to remember to switch the subwoofer’s crossover setting to ‘Dôme’ before you run through the system set up if you’re using the speakers in a 2.1 configuration. From the off this package handles movie soundtracks with aplomb. The subwoofer is extremely generous when it comes to dishing out bass weight and power. Thankfully though it never sounds thick or tubby. Size (satellite/sub): 172x144x143mm / 400x276x276mm Weight (satellite/sub): 1.9kg / 8.2kg Type: 2-way compact Drivers: 100mm Polyglass mid-bass / 25mm AI/Mg inverted dome tweeter Frequency response: 80Hz-28kHz Crossover frequency: 2.5kHz Low frequency point (satellite/sbu): 72Hz / 35Hz Sensitivity: 88dB Nominal impedance: 8ohms Minimize

PSB SubSeries 500 subwoofer will provide you the flattest p ... Read more

PSB SubSeries 500 subwoofer will provide you the flattest possible frequency response full bass extension low distortion and high output. The Subseries 500 Subwoofer is rated at 500 watts continuous power and is capable of over 1500 watt peaks. A severe duty aluminum cast basket very large magnet structure and high powered voice coil allow the SubSeries 500 to effortlessly churn out low frequencies at foundation shaking levels. SubSeries 500 Subwoofer Specifications Frequency Range On Axis @ 0¡ ±3dB 25-150Hz Lf Cutoff -10dB 22 Hz Impedence Nominal 120V 60Hz | 220-240V 50/60 Hz Amplifier Power Continuous 500W Dynamic 750W Dynamic Peak 1500W Design Class H Discrete MOSFET Output Devices Acoustic Design Woofer (Nominal) 12Ó (300 mm) Woven Fiber Glass Cone Rubber Surround 2Ó (50mm) Voice Coil 80oz (2268g) Magnet Cast Basket Crossover Variable 50Hz-150Hz 24dB/octave Linkwitz-Riley Low Pass Filter Internal Volume Design Type 2.34 Bass Reflex 2 x 2 3/4Ó(70mm) Down Firing Ports Radiussed Externally and Internally Size (W x H x D) Millimeters 391mm x 584mm x 535mm Inches 15 7/8Ó x 23 3/16Ó x 21 1/16Ó Net Weight Kilograms 32.5 kg/each Pounds 71.6lb /each Shipping Weight Kilograms 37.5 kg/each Pounds 82.6lb /each Finish Black and Cherry wood Veneer Features Front Mounted Volume Crossover Continuous Variable Phase Controls Power LED Auto on/off LFE in/out LL Stereo in/out HL Stereo in 12V Trigger Vibration absorbing feet Gold-plated RCA Inputs/Outputs High/Speaker Level Gold-plated 5-way Binding Post Inputs Minimize

Sold individually... We invest as much care expertise and r ... Read more

Sold individually... We invest as much care expertise and research in the smallest loudspeaker as we do in the grandest. Irrespective of architecture or interior design Monitor Audio’s range gives you the freedom to supply high quality sound from a versatile mix of floor stand wall and flush-mounted speakers. The W165 is a brilliant in-wall speaker which is easy to install and has a clear dynamic performance worthy of the brand. 2-way design with pivoting C-CAM® tweeters (15 degrees of play). High overall efficiency. High frequency level adjustment (+/-3dB). Timbre-match with BR-CP Radius-CP Climate 10 and Bronze BR and Radius Series hi-fi speakers Our innovative Tri-Grip fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal maximising bass response and mid-range clarity. Aluminium alloy grille for rust-free performance and longevity. It is non magnetic and lighter in weight. Paint-able surface to blend with the living environment. A paint mask and additional scrim material are provided for trouble free painting. Fire retardant to UL-94 VO rating. Splash and humidity proof for installation in shower room or pool areas. Features dust protection cover that is designed to prevent the ingress of dirt or dust into the driver and crossover. Frequency Response: 60 Hz - 25 kHz Sensitivity (1W@1M): 88.5 dB Impedance (Nominal): 6 ohms Maximum SPL (Single unit in free space): 107.4 dBA Power Handling (RMS): 65 W Recommended Amp Requirements: 10 - 65 W Drivers: 1 x 6.5” MMP®II cone bass driver 1 x 1” C-CAM® Pivoting gold dome tweeter Overall Dimensions: (H x W) 368 mm x 249 mm (14 1/2 inch x 9 13/16 inch) Overall Depth: 94.5 mm (3 3/4 inch) Cut-Out Dimensions: (H x W) 332 mm x 212.5 mm (13 1/16 inch x 8 3/8 inch) Mounting Depth: 90 mm (3 9/16 inch) Controls: +3db / 0dB / -3dB High frequency level switch Fixing Type: 6 position Tri-Grip dog fixings Cable Connection: Gold plated ‘push’ type terminals Construction Material: Mineral filled ABS plastic (UL94/V0 rated RoHS compliant) Weight: 2.24 Kg (4.9 lb) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

SOLD INDIVIDUALLY... SpeakerCrafts’s latest outdoor subwoof ... Read more

SOLD INDIVIDUALLY... SpeakerCrafts’s latest outdoor subwoofer aims to go low – really low as in subterranean. In fact this woofer goes so low all you can see is a small hooded port that’s exposed above the surface of the ground. The rest of the “BoomTomb” is buried underground for a near-total stealth look. Inside the BoomTomb is a 10-inch long-throw woofer and a hood covers the top of the port to protect the stuff inside from the elements and curious critters. A dedicated 250-watt amp gets to stay inside next to the rest of your electronics where it is (hopefully) warm and dry. No word yet on pricing. 90dB 1w/1m 250 Watts 4 Ohms 30HZ-200HZ (H x W x L) "15.5 x "24.625 x "12.5 “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell. Minimize

Priced Individually... Wall mounted system for use with LCD ... Read more

Priced Individually... Wall mounted system for use with LCD/Plasma displays. 4 x 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 3" Gold C-CAM® tweeters provide extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. D’Appolitto driver array provides good dispersion and fantastic mid-band clarity and presence. Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays. High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses. Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Rear-ported reflex design. Internal PTC auto-reset protection circuit to prevent over-driving. ARC® front baffle (Anti-Resonance Composite). Originally developed for our high-end Platinum series ARC is a cast thermo-set polymer loaded with minerals to provide very inert optimally damped components. It is ideal for high-end acoustic applications where a high degree of structural rigidity and vibration damping is required. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Frequency Response: C: 55 Hz - 35 KHz L/R: 85Hz - 35KHz Sensitivity (1W@1m): C: 90 dB L/R: 87dB Nominal Impedance: C: 8 Ohms L/R: 8 Ohms Power Handling Single (RMS): C: 100 W L/R: 60 W System Power Handling (RMS): C: 150 W L/R: 100 W Recommended Amplifier Requirements: C: 20 - 150 W L/R: 10 - 100 W Maximum SPL (dBA): 108 Bass Alignment: C: Bass reflex - front ported L/R: Bass reflex - ported to the underside Drive Unit Complement: 4 x 100mm (4") MMP®II cone bass/mid driver. 3 x 25mm (1") C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 125 x 1010 x 105 mm (4 15/16 x 39 3/4 x 4 1/8) Weight (each): Kg (lbs) 8 (17 5/8) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold per Pair... It’s widely understood that the sound of s ... Read more

Sold per Pair... It’s widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls the RX-FX design will blend with the system and your décor so completely you’ll wonder why you ever thought of compromise. It’s also immensely flexible sonically offering direct or diffuse sound effects at the flick of a switch. Flush to wall placement with recessed termination. Drivers match with other Rx loudspeakers for consistent timbre and consistency. Dual di-pole/ bi-pole modes easily selected by switch operation. New C-CAM® tweeter design with damped rear chamber providing improved clarity and wider operating range to make better use of HD audio formats Single 6” C-CAM® bass/mid-range driver incorporating RST® technology for better damping and improved mid-range clarity. Selected premium quality wood veneers or high gloss piano finishes. Acoustically matched with all other Rx speakers for excellent imaging and consistency of timbre in surround applications. System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 300 x 120 x 250 mm (11 13/16 x 4 3/4 x 9 13/16 inch) Individual Weight: 4.69 Kg (10.38 lb) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold individually... We invest as much care expertise and r ... Read more

Sold individually... We invest as much care expertise and research in the smallest loudspeaker as we do in the grandest. Irrespective of architecture or interior design Monitor Audio’s range gives you the freedom to supply high quality sound from a versatile mix of floor stand wall and flush-mounted speakers. The C165 is a brilliant little in-ceiling speaker which is easy to install and has a clear dynamic performance worthy of the brand. As part of the 100 Series of architectural speakers it offers the biggest bass driver size of any speaker in its class providing a convincing full-range sound in a wide range of locations. 2-way design with pivoting C-CAM® tweeters (15 degrees of play). High overall efficiency. High frequency level adjustment (3dB). Audio match with BR-CP Radius-CP Climate 10 and Bronze BR and Radius Series hi-fi speakers. Our innovative Tri-Grip fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal maximising bass response and mid-range clarity. Aluminium alloy grille for rust-free performance and longevity. It is non magnetic and lighter in weight. Paint-able surface to blend with the living environment. A paint mask and additional scrim material are provided for trouble free painting. Fire retardant to UL-94 VO rating. Splash and humidity proof for installation in shower room or pool areas. Features dust protection cover that is designed to prevent the ingress of dirt or dust into the driver and crossover. Frequency Response: 60 Hz - 25 kHz Sensitivity (1W@1M): 88.5 dB Impedance (Nominal): 6 ohms Maximum SPL (Single unit in free space): 107.4 dBA Power Handling (RMS): 65 W Recommended Amp Requirements: 10 - 65 W Drivers: 1 x 6.5” MMP®II cone bass driver 1 x 1” C-CAM® Pivoting gold dome tweeter Overall Diameter: 250 mm (9 13/16 inch) Overall Depth: 117 mm (4 5/8 inch) Cut-Out Diameter: 211 mm (8 5/16 inch) Mounting Depth: 112 mm (4 7/16 inch) Controls: +3db / 0dB / -3dB High frequency level switch Fixing Type: 3 position Tri-Grip dog fixings Cable Connection: Gold plated ‘push’ type terminals Construction Material: Mineral filled ABS plastic (UL94/V0 rated RoHS compliant) Weight: 1.92 Kg (4.2lb) Minimize

SOLD INDIVIDUALLY ... The sculpted low-diffraction cabinet ... Read more

SOLD INDIVIDUALLY ... The sculpted low-diffraction cabinet of the diminutive GX50 houses a single 5.5” RST bass driver and C-CAM ribbon transducer. The bass driver exhibits the low frequency extension and power handling of a much larger driver while the excellent C-CAM ribbon soars beyond conventional domed tweeters to a stratospheric 60kHz. Consequently the GX50 combines the frequency range of the finest studio monitors with dynamics that defy its modest dimensions. Optional dedicated floor stands are available for the GX50 which can be filled to provide the ultimate foundation for the best possible sound quality. New C-CAM® ribbon transducer design – providing extension to a class leading 60KHz HiVe® port technology for better transient response and tighter bass Single bolt through driver fixings for improved bracing rigidity and driver/baffle de-coupling Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables Pureflow® Silver internal cabling Selected premium quality wood veneers or high gloss piano finishes. Rigid 20mm MDF construction throughout employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration Invisible magnetic grille fixing provides clean visual styling when used with the grille off System Format: 2 Way Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 86 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 109.8 dBA Power Handling (RMS): 100 W Recommended Amplifier Requirements (RMS): 50 - 100 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.3 kHz Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 300 x 170 x 263 mm (11 13/16 x 6 11/16 x 10 3/8 inch) Weight (each): 7.5 Kg (16.5 lbs) Our company is not an authorized dealer of this product but does maintain a stocking inventory of this product. As such the manufacturer reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold at no extra charge and everything will be warrantied by our store equivalent to the manufacturers warranty. Minimize

SOLD INDIVIDUALLY ... The GX100 is a larger 2-way stand mou ... Read more

SOLD INDIVIDUALLY ... The GX100 is a larger 2-way stand mount speaker featuring a 6.5" RST bass driver and C-CAM ribbon transducer. Operating with the performance of a typical 8" driver our proprietary 6.5" design provides higher overall efficiency with dynamic headroom to deliver impressive bass extension and control. The GX100's uncomplicated 2-way configuration renders complex material with tonal accuracy and perfect timing. It may occupy the space of a stand-mount speaker but the GX100 sounds like a reference floor-stander. Optional dedicated floor stands are available. New C-CAM® ribbon transducer design – providing extension to a class leading 60KHz HiVe® port technology for better transient response and tighter bass Single bolt through driver fixings for improved bracing rigidity and driver/baffle de-coupling Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables Pureflow® Silver internal cabling Selected premium quality wood veneers or high gloss piano finishes. Rigid 20mm MDF construction throughout employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration Invisible magnetic grille fixing provides clean visual styling when used with the grille off System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 60 - 120 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 362 x 210 x 303 mm (14 3/8 x 8 1/4 x 11 15/16 inch) Weight (each): 9.9 Kg (21.75 lbs) Our company is not an authorized dealer of this product but does maintain a stocking inventory of this product. As such the manufacturer reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold at no extra charge and everything will be warrantied by our store equivalent to the manufacturers warranty. Minimize

In order to extend the performance of its lifestyle speaker ... Read more

In order to extend the performance of its lifestyle speaker systems Monitor Audio has created a wholly new sub-bass engine for the AW-12 designed to contribute a seismic blend of deep bass frequencies and high output with low distortion. Every component has been developed specifically for the AW-12 including the massively engineered front-firing 12" C-CAM driver and 500 watt Class D amplifier. The amplifier and its complementary high efficiency switch mode power supply are able to deliver full power with a continuous rating equal to most other subwoofers rated at 1000 watts. This means that even in the largest rooms the AW-12 is able to perform cleanly dynamically and with profound effect over extended periods of listening. The AW-12's luxury looks are no less impressive. Finished in a range of lacquers (Piano black metallic and Piano White Metallic) to complement Monitor Audio's lifestyle satellite speakers and complete with aluminium side trims the AW-12 has the build quality and design to blend with the richest of interiors. Its compact sealed cabinet will be easy to position and the top-mounted control of volume and EQ are designed for easy setup and adjustment. The 12V trigger input allows for auto-activation when using a compatible A/V receiver or processor. The AW-12's new adjustable foot design has the floor spike permanently fitted with a removable heavy duty rubber cover for solid or hard wood flooring. Balancing beautifully the virtues of convenience and design refinement and power the AW-12 offers a devastating introduction to the benefits of superior subwoofer engineering. Amplifier Output: 500 Watts (RMS) 1000 Watts (Peak) Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2) Upper Frequency Limit 40 - 120Hz Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter) Cabinet Specification: Sealed Cabinet with 25mm M.D.F construction bracing. Amplifier Classification: Class- D amplifier Driver Compliment: 1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil. Dimensions: (H x W x D) 340 x 340 x 370 mm (13 3/8 x 13 3/8 x 14 1/2 inch) Weight: (unpacked) 25.5 Kg (56lbs) Mains Input Voltage: 100 - 120 Vac 220 - 240 Vac 50-60V Input Impedance 20K Ohms Minimize

The SubSeries 1 is the first of a next generation of high-p ... Read more

The SubSeries 1 is the first of a next generation of high-performance powered subwoofers from PSB. Building on the popular SubZero i it brings a new level of performance and value to the most affordable subwoofer category. With many significant performance enhancements it will deliver lower louder and more musically natural bass than other subwoofers in its price class. And though it’s compact and unobtrusive it provides the kind of high-impact performance associated with many bigger and more expensive subwoofers. Frequency Range Lf Cutoff -10dB 32Hz Frequency Range (-6dB) 36-150Hz Sound Pressure Level Maximum @ 100Hz 106dB Impedence Nominal 15 kOhm Minimum 470 Ohm Amplifier Power Continuous 110 Watts Dynamic 140 Watts Dynamic Peak 280 Watts Design Class AB Discrete MOSFET Output Devices Acoustic Design Woofer (Nominal) 8” Polypropylene Cone Rubber Surround 1” Voice Coil 28 oz (791g) Magnet +20 oz (567g) Shielding Magnet Crossover Variable 50Hz-150Hz 24dB/octave Linkwitz-Riley Low Pass Filter Internal Volume Design Type 0.68cu ft (19.3 liter) Bass Reflex 1 x 1” x 8” Front Duct Radiused Externally Video Shielded Size (W x H x D) Millimeters 244mm x 337mm x 368mm Inches 9 5/8” x 13 1/4” x 14 1/2” Net Weight Kilograms 10.5kg Pounds 23.0lb Shipping Weight Kilograms 12.3kg Pounds 27.0lb Finish Black Ash Maple or Sienna Features Front-mounted Volume Crossover and Signal LED Rear-mounted Phase Crossover Bypass and On-Standby/Off Low/Line Level/LFE Gold-plated RCA Inputs High/Speaker Level Gold-plated 5-way Binding Post Inputs Vertical with Feet (or Horizontal) Minimize

The CHS 212 Subwoofer is specifically designed for larger c ... Read more

The CHS 212 Subwoofer is specifically designed for larger custom installations where in-cabinet applications are a must. The CHS 212 Subwoofer is the counterpart to the highly acclaimed SubSeries 10 Subwoofer and begins with a pair of hand-built 12-inch long-throw woofers designed to withstand the punishment and demand of theater soundtracks. The powerful 500-watt internal amplifier extensive contouring and system-matching controls allow the sub to produce virtually unrestricted bass with unparalleled transient response free of distortion. 500W Powered In-cabinet Subwoofer Frequency Range On Axis @ 0¡ ±3dB 27-150Hz Lf Cutoff -10dB 24Hz Sound Pressure Level Maximum @ 100Hz 114dB Impedence Nominal 15 kOhm Minimum 1 kOhms Amplifier Power Continuous 500 Watts Dynamic 750 Watts Dynamic Peak 1500 Watts Design BASH Class H Discrete MOSFET Acoustic Design Woofer (Nominal) 2 x 12″ (300mm) Woven Fiberglass Cone Rubber Surround 2" (50mm) Voice-Coil 48 oz (1361g) Magnet Cast Basket Crossover Variable 50-150Hz LR4 Low Pass Filter 24dB/octave Linkwitz-Riley Internal Volume Design Type 3.43 cu ft (97.1 liter) Bass Reflex 2 x 2_″ (699mm) Front Ports Radiussed Ex&Internally Size (W x H x D) Millimeters 445 x 610 x 502 Inches 17 1/2 x 25 5/8 x 20 1/4″ (grille on) 17 1/2 x 25 1/2 x 18 7/8″ (grille off) Net Weight Kilograms 37.7kg /each Pounds 83 lbs Shipping Weight Kilograms 50kg /each Pounds 110lb /each Finish Black Textured Finish Features Volume Crossover (Front mount) Bypass Phase On-Standby/Off Metal Control Knobs LL/LFE In&Outputs LL High Pass 80Hz 12dB/Octave High Level Input Gold-plated RCAs & Metal 5-way Binding Posts Feet with Adjustable Spikes & Rubber Levelers Minimize

SOLD INDIVIDUALLY...Perfect for high-performance sound anyw ... Read more

SOLD INDIVIDUALLY...Perfect for high-performance sound anywhere in the home the AT line of two-way ceiling-mount and in-wall loudspeakers sets a new performance and installation standard. The 5-1/4" 6-1/2" and 8" speakers offer a versatile range of installation options assuring no-compromise sound regardless of the speakersÕ installation requirements. Features: 8" Aluminum/titanium/urethane cone with cast- aluminum frame bi-filer voice-coil winding extreme temperature Til voice-coil former inverted dust cap Butyl rubber suspension and custom construction-debris screen Dual 1-1/2" aluminum/ titanium/urethane hyperbolic-dome midranges 1" fluid-cooled aluminum/ titanium/urethane hyperbolic-dome tweeter Midranges and tweeter use NDFE 35 neodymium high magnetic-flux motor structure Midranges and tweeter are housed in a 360¡ rotating 30¡pivoting DSFG¨ adjustable dispersion array Sub-bass boost control (3dB @ 60 Hz) 1kHz and 3.5kHz selectable LinearTrackª filters Low-diffraction X-Matrixª reinforced polycarbonate baffle Overall frame dimensions: 11" x 18-3/8" Hole cutout dimensions:9-3/4" x 17-1/4" The word mark NILES¨ is a registered trademark of Niles Audio Corporation Miami Florida. The images of Niles equipment components and/or accessories depicted above may be copyrightable subject matter of Niles Audio Corporation Miami Florida. Our online store is not an authorized dealer of Niles Audio Corporation but does maintain a stocking inventory of that company's products. As such Niles Audio Corporation reserves the right not to honor its factory warranty on this product. However we offer an equivalent warranty on all products. Minimize

Sold Individually... The SA2 is the world's first invisible ... Read more

Sold Individually... The SA2 is the world's first invisible in-wall loudspeaker. When properly installed this amazing speaker's unique design allows it to become part of the wall surface — completely concealed behind the wall covering material yet it delivers remarkable sound. Ideal for any home where the decor demands that the speakers remain visually undetectable. Specifications Radiating Surface 294.0 sq. in (1869 sq. cm) planar diaphragm Tweeter System 0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil; 12dB/octave high-pass crossover @ 2kHz Woofer System 0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil; 12dB/octave low-pass crossover Frequency Response 70Hz – 20kHz ±4dB Impedance 4 ohms nominal ;3.5 ohms minimum Power Rating 60 watts RMS as per EIA standard RS-426-A Sensitivity 90dB (1 meter) Dispersion 140° hemispherical up to 20kHz Finish Primed surface ready to receive supplied vellum overlay Overload Protection Two independent self-resetting gel switches (low frequency and high frequency) Included Supplies Vellum overlay joint compound overlay adhesive measuring cup rubber standoffs screws washers hex key Dimensions WxHxD 14" x 21" x 3" (350mm x 534mm x 76mm Minimize

The Bryston BDP-1 is the world’s first dedicated player for ... Read more

The Bryston BDP-1 is the world’s first dedicated player for high resolution digital files. Employing a modified Linux OS optimized to provide the highest quality audio performance the BDP-1 will play high resolution audio files (up to 192k/24b) from any USB storage device without compromise. Inputs: 4x USB 2.0 Outputs: SPDIF (BNC) AES/EBU (XLR) Control: Ethernet (RJ-45) RS-232 (DB9) Audio Format: AIFF FLAC WAV MP3 M4A OGG Features: Dedicated high resolution digital audio player Playback from USB flash drives and USB hard disk drives (HDD) Multiple control options (iPhone iPod Touch iPad Android OS and PC) User upgradable firmware Requires external DAC (see External DAC in Digital Audio)* RS-232 serial data port for remote control via Crestron AMX or similar control systems Options: Available with silver or black faceplate 17” or 19” faceplate available (non-rack mountable) BR2 remote control available (see Accessories in Other Products) *External DAC required for full 192K/24b performance but the BDP-1 is also compatible (up to 96K) with the optional DAC modules in BP26 BP6 and BP16 preamps or B60R and B100 integrated amplifiers. Minimize

My Passport offers high capacity in a sleek portable drive. ... Read more

My Passport offers high capacity in a sleek portable drive. It features ultra-fast USB 3.0 connectivity; automatic, backup software; and password protection and hardware encryption to help protect your files from unauthorized use with plenty of room to store all your files. Ultra-fast transfer rates - When connected to a USB 3.0 port My Passport lets you access and save files in blazing speed. Reduce transfer time by up to 3 times when compared to USB 2.0 transfer rates.**Performance may vary based on user's hardware and system configuration. USB 3.0 and USB 2.0 compatibility ? With this single drive you get compatibility with your USB 2.0 devices today and the ultra-fast speed of USB 3.0 when you?re ready to step up to the next generation. High-capacity, small design ? Offering up to 2 TB capacity in a compact drive, My Passport is the ideal companion for anyone with lots of videos, photos, music, and files that they want to help protect and take on the road. Automatic, continuous backup software - You're in control of your backup. Install all the features, select just the components you need, or if you prefer, choose not to use the software at all. The software works quietly in the background to help protect your data using minimal PC resources. Whenever you add or change a file, it's instantly backed up. WD Security - WD Security utility allows you to set password protection and hardware encryption for your drive to help protect your files from unauthorized use or access. WD Drive Utilities ? Register your drive, set drive timer, run diagnostics and more using WD Drive Utilities. USB-powered - Powered directly from the USB port on your PC. No separate power supply is needed. WD quality inside and out ? We know your data is important to you. So we build the drive inside to our demanding requirements for durability, shock tolerance, and long-term reliability. Then, we protect the drive with a durable enclosure designed for beauty and protection. Features Sleek... Minimize

SOLD INDIVIDUALLY... Great bass an integral part of any mus ... Read more

SOLD INDIVIDUALLY... Great bass an integral part of any music and theater system. The rumblings of a distant thunderstorm in-your-face percussive attack of a kick drum deep resonant bass adds an emotional impact to any audio system. Since the volume of air movement needed to create this effect is substantial subwoofers with dedicated enclosures and amplification are a necessary component in all high-performance systems. SpeakerCraft optimized performance carefully designing each woofer cabinet and amplifier as a single system. Like any great freestanding subwoofer a carefully blended woofer cabinet and amplifier result in an in wall subwoofer performing like its floor standing ancestors. Entirely new Cinema Subs match flawlessly to a wide variety of speaker models. Integrating multiple subs is easy and unobtrusive. Take advantage of this opportunity to get the bass off the floor and allow it to blend into the décor with the rest of the speakers. The all-new Cinema Subs great bass no space Order Stock # ASM67120 12" Reinforced Treated Paper Cone Woofer with Dual Voice Coil Enhanced Performance and Look Fully Optimized System (Cinema Sub 12 AccuTuneBox 12 & Bass Power 250 are Engineered to Work as a System) Sensitivity: 91dB 1W/1m Power Handling: 250 Watts Impedance: 4 Ohms per Coil Frequency Response: 25Hz - 500Hz Dimensions: (H x W x D) 14 15/16" x 14 15/16"x31 5/16"(380 mm x 380 mm x 100 mm) Cut Out Dimensions: (H x W) 13 3/8" x 13 3/8" (340 mm x 340 mm) “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell. Minimize

Sold Individually... 4" MMP®II. The Metal Matrix Polymer dr ... Read more

Sold Individually... 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 1" Gold C-CAM® tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays. High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Internal PTC auto-reset protection circuit to prevent over-driving. Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Frequency Response: 80 Hz - 35 KHz Sensitivity (1W@1m): 87 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS):60 W System Power Handling (RMS): 100 W Recommended Amplifier Requirements: 10 - 100 W Maximum SPL (dBA): 105 Bass Alignment: Bass reflex - rear ported Drive Unit Complement: 1 x 100mm (4") MMP®II cone mid-bass driver. 1 x 25mm (1") C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 198 x 125 x 140 mm (7 13/16 x 4 15/16 x 5 1/2) Weight (each):Kg (lbs) 2 (4 3/8) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

SOLD INDIVIDUALLY... This subwoofer has a rectangular “driv ... Read more

SOLD INDIVIDUALLY... This subwoofer has a rectangular “driver” surface with more cone moving bass creating surface area than a 15" comparably sized round subwoofer. A rectangular subwoofer will sound louder than a traditional 15” round subwoofer because the four corners give you more moving air capability with greater cone area. The extra surface generates a wider frequency response as well with a bass response that is both tight and well extended. Combine with the Bass Power 250 Amplifier and the Seamless Subwoofer will allow music and film sound tracks to literally appear from “nowhere”. Completely Invisible Subwoofer Install Under Plaster Paint Wallpaper or Stucco Direct Radiating Point Source Design Live Wall Technology Greater Cone Moving Area Than Standard 15" Subwoofer Frequency Response: 45Hz - 250Hz Power Handling: 250W RMS Maximum SPL: 105dB Miswire & Overload Protection Installation Depth: 83mm Designed For Use With Bass Power 250 Amplifier “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell. Minimize

HFC-10 (9100-91) Deliming system for warewashing equipment. ... Read more

HFC-10 (9100-91) Deliming system for warewashing equipment. Description: Provides simple, efficient deliming of commercial warewashing equipment Uses ScaleKleen, Everpure's proprietary food-grade scale remover which is environmentally safe Reduces limescale deposits which can cause equipment failure Improves equipment efficiency, helps extend the life of equipment and reduces maintenance costs System includes a heavy-duty housing, dip tube assembly, 2.2 lb. ScaleKleen package and hardness test strip Features: Deliming Maximum Flow: 6 gpm (22.7 Lpm) Qty. per Case: 1 Working Pressure: 10 - 125 psi (0.7 - 8.6 bar), non-shock Max. Temp: 160°F (94°C) Inlet Outlet Size: 1/2" Operating Weight: 10 lbs Shipping Weight: 7 lbs H: 12.5" W: 5.5" D: 5.5" Minimize

Sold Individually... Wall mounted system for use with LCD/P ... Read more

Sold Individually... Wall mounted system for use with LCD/Plasma displays. 2 x 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 1" Gold C-CAM® tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. D’Appolitto driver array provides good dispersion and fantastic mid-band clarity and presence. Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays. High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses. Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Front-ported reflex design. Internal PTC auto-reset protection circuit to prevent over-driving. ARC® front baffle (Anti-Resonance Composite). Originally developed for our high-end Platinum series ARC is a cast thermo-set polymer loaded with minerals to provide very inert optimally damped components. It is ideal for high-end acoustic applications where a high degree of structural rigidity and vibration damping is required. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Full length oval perforated grilles supplied in black and silver can be customised to suit individual décor and taste Frequency Response: 55 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance:8 Ohms Power Handling Single (RMS):150 W System Power Handling (RMS): 100 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Bass reflex - front ported Drive Unit Complement: 2 x 100mm (4") MMP®II cone mid-bass driver. 1 x 25mm (1") C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 610 x 125 x 105 mm (24 x 4 15/16 x 4 1/8) Weight (each): Kg (lbs) 4.8 (10 1/2) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold Individually... Wall mounted system for use with LCD/P ... Read more

Sold Individually... Wall mounted system for use with LCD/Plasma displays. 2 x 4" MMP®II. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion resulting in fast punchy bass. All drivers are dedicated and model specific with each model in the Radius HD series being designed and voiced individually. 1" Gold C-CAM® tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully. D’Appolitto driver array provides good dispersion and fantastic mid-band clarity and presence. Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays. High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses. Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Front-ported reflex design. Internal PTC auto-reset protection circuit to prevent over-driving. ARC® front baffle (Anti-Resonance Composite). Originally developed for our high-end Platinum series ARC is a cast thermo-set polymer loaded with minerals to provide very inert optimally damped components. It is ideal for high-end acoustic applications where a high degree of structural rigidity and vibration damping is required. Flush fitting grille with rotate-able ‘m’ logo for positioning in Landscape or portrait orientation. A specially designed die-cast metal wall bracket is supplied providing easy install and adjustment for wall positioning. Full length oval perforated grilles supplied in black and silver can be customised to suit individual décor and taste. Frequency Response: 50 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS):100 W System Power Handling (RMS): 150 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Front ported Drive Unit Complement: 2 x 100mm (4") MMP®II cone mid-bass driver. 1 x 25mm (1") C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 760 x 125 x 105 mm (29 15/16 x 4 15/16 x 4 1/8) Weight (each): Kg (lbs) 5.2 (11 1/2) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Using the latest switch mode power conversion techniques th ... Read more

Using the latest switch mode power conversion techniques the RXW-12’s new 500 watt Class D amplifier provides enough power to control with brutal efficiency a newly designed 12” C-CAM driver which is equipped with a double stack (two magnet) motor system and a massive 3” voice coil. The RXW-12’s rigid sealed 25mm (1”) MDF enclosure is front-loaded firstly because it promotes the fastest deepest bass down to 20Hz and secondly for ease of installation. Wherever you place it top mounted controls are provided for the fine adjustment of level turnover and other parameters at the sub. For added convenience a 12V trigger provides power syncing with your AV receiver. Ultra long throw 12” C-CAM driver featuring triple suspension for ultimate linearity. Large 3” voice coil and double stack motor system provides high power handling and low distortion. Powerful 500W RMS Class-D amplifier with SMPSU able to deliver over 1000 watts peak. 12volt trigger - provides switching control from AV amp or processor. 25mm (1”) thick MDF construction Heavy radial cabinet bracing Top mounted control panel for easy access. Selected real wood veneer or high gloss piano finishes Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2) Upper Frequency Limit: 40 - 120Hz Variable Power Output: 500W RMS (1000W Peak) Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter) Cabinet Specification: 25mm construction and internal bracing Cabinet Alignment: sealed cabinet Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil External Dimensions: (H x W x D) inc. amp & driver 340 x 340 x 410 mm (13 3/8 x 13 3/8 x 16 1/8 inch) External Dimensions: (H x W x D) inc. feet & grille 375mm (15") high with feet 430mm (16 15/16") deep inc. amp & grille Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz Individual Weight: 22.56 Kg (49.63 lb) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize