> Marine Electronics > nw active gear/store boatersworld com

Active GPS Antenna for use with the mn100 Micronet system. ... Read more

Active GPS Antenna for use with the mn100 Micronet system. Easily adds Position, Course and Speed Over the Ground to your mn100 Micronet system. Wires directly to the T122 Wirless NMEA Interface Can be mounted inside or outside the boat 16 parallel channels Weighs only 108 grams without cable Accurate to 3.3m RMS*(DOP Mounting: 22mm(D)x 15mm(H)Bolt Comes with standard (1"x14) pole mount adapter suitable for use with deck, mast and stantions Small form factor Simple installation Antenna Accessories Minimize

Compact Color S/MapFind fish and yourself in dazzling color ... Read more

Compact Color S/MapFind fish and yourself in dazzling color, at a highly affordable price! Features high-detail hydrographic mapping and an internal GPS+WAAS receiver.View PointsHigh-brightness 3.5" (8.9cm) diagonal 256-color, 1/4 VGA active matrix TFT transflective LCDImpressive 320V x 240H pixel resolutionWhite LED backlit screen and keypad for night or low-light viewingSimplified keypad with Menu and Pages keysOverlay Data feature displays GPS information over sonar screen, and sonar information over GPS screensSpace-saving case design with adjustable tilt, quick-mount/release convenienceSonarDepth penetration to 600 feet* (183 m)True 800 watts peak-to-peak transmit powerUnique full-screen LCD flasher mode with COLORLINE™ displays real-time sonar readingsOther unique sonar features include: HyperScroll™, Advanced Signal Processing (ASP™), Advanced Fish Symbol I.D.™, FishTrack™, and more2X and 4X zoom, with zoom-bottom-trackingAuto or manual sensitivity, surface clarity, noise rejection, and depth range controlsSelective on/off shallow, deep, zone, and fish alarmsLow-profile high-performance 12º 200 kHz Skimmer® - with built-in water surface temp sensor - optional sensors for livewell/baitwell temp and speed/distance log readingsUp to 60-degree coverage area using high sensitivityOperates up to 70 mph (61 kts)GPS/MappingFull 12-parallel channel GPS+WAAS receiver with advanced internal satellite antennaSpecial built-in Lowrance high-detail hydrographic mapping of lakes, rivers, Great Lakes, and U.S. coastal waters with nav aidsMega-memory saves up to 1,000 waypoints, 1,000 event markers, and 100 routes (up to 100 waypoints/route)100 savable plot trails with up to 10,000 points per trail42 graphic icons to mark important spots40 map ranges - 0.02 to 4,000 miles - with easy zoom-in/out controlOff course/arrival/anchor alarms; trip calculator, sun/moon calculator; and Man Overboard featuresPlusInternal back-up memory keeps stored sonar settings and GPS data accessible for yearsCompletely sealed and waterproof for use in the harshest environmentsFull one-year warranty Fishfinders & Depth Sounders Minimize

Compact Color S/MapFind fish and yourself in dazzling color ... Read more

Compact Color S/MapFind fish and yourself in dazzling color, at a highly affordable price! Features high-detail hydrographic mapping and an internal GPS+WAAS receiver.View PointsHigh-brightness 3.5" (8.9cm) diagonal 256-color, 1/4 VGA active matrix TFT transflective LCDImpressive 320V x 240H pixel resolutionWhite LED backlit screen and keypad for night or low-light viewingSimplified keypad with Menu and Pages keysOverlay Data feature displays GPS information over sonar screen, and sonar information over GPS screensSpace-saving case design with adjustable tilt, quick-mount/release convenienceSonarDepth penetration to 600 feet* (183 m)True 800 watts peak-to-peak transmit powerUnique full-screen LCD flasher mode with COLORLINE™ displays real-time sonar readingsOther unique sonar features include: HyperScroll™, Advanced Signal Processing (ASP™), Advanced Fish Symbol I.D.™, FishTrack™, and more2X and 4X zoom, with zoom-bottom-trackingAuto or manual sensitivity, surface clarity, noise rejection, and depth range controlsSelective on/off shallow, deep, zone, and fish alarmsLow-profile high-performance 200 kHz Skimmer® - with built-in water surface temp sensor - optional sensors for livewell/baitwell temp and speed/distance log readingsUp to 60-degree coverage area using high sensitivityOperates up to 70 mph (61 kts)GPS/MappingFull 12-parallel channel GPS+WAAS receiver with advanced internal satellite antennaSpecial built-in Lowrance high-detail hydrographic mapping of lakes, rivers, Great Lakes, and U.S. coastal waters with nav aidsMega-memory saves up to 1,000 waypoints, 1,000 event markers, and 100 routes (up to 100 waypoints/route)100 savable plot trails with up to 10,000 points per trail42 graphic icons to mark important spots40 map ranges - 0.02 to 4,000 miles - with easy zoom-in/out controlOff course/arrival/anchor alarms; trip calculator, sun/moon calculator; and Man Overboard featuresPlusInternal back-up memory keeps stored sonar settings and GPS data accessible for yearsCompletely sealed and waterproof for use in the harshest environmentsFull one-year warranty GPS & Sounder Combo Minimize

The Clipper navtex is the culmination of nearly 20 years of ... Read more

The Clipper navtex is the culmination of nearly 20 years of experience in manufacturing navtex instruments. The compact display unit will grace any instrument panel with its sharp high contrast liquid crystal display. Standard features of the receiver include 518 and 490kHz message reception and a non volatile program memory - if your sailing is confined to one particular area, then you need program the unit only once. Though it will of course receive every station worldwide if necessary! For the best possible night viewing the unit boasts a white backlight that is actuated automatically when programming, a single key press will turn it on and off when reading the messages. Additionally, a built in timer for the light is included to save power when not needed. The antenna at just 195mm high can be easily mounted at deck level to receive the navtex low frequency signals.Technical Specifications: 518 & 490 kHz operation 16 lines x 40 characters per screen Very high contrast display with white backlight Supply voltage nominal 12V Consumption 50mA @ 12V. (100mA with backlight) Power save auto timer on backlight Signal quality indicator and message error counter Non volatile program memory Compact display size: L-150mm, H-112mm, D-42mm Active micro antenna: H-195mm x 40mm. 7m cable Optional rail mount bracket MP Master List Minimize

PHASE IIIEmbark upon your next voyage w/ the most technolog ... Read more

PHASE IIIEmbark upon your next voyage w/ the most technologically advanced antenna we've ever created...8' Cellular Antenna 3DB Gain800/900 MHz and 1900 MHz CellularThis antenna handles all digital, analog and PCS cellular bands. Its 8' length coordinates with other Phase III antennas. A brass choking sleeve eliminates patter distortion due to cable radiation. Use a Shakespeare CPA Series adapter to connect your cell phone. Suggested mount: Shakespeare Style 5187 Ratchet Mount.In A Class by ItselfOur new line of Phase III marine antennas has taken years of painstaking development. The process entailed not just designing the antennas, but also engineering the custom-made tools and equipment for manufacturing at our Columbia, South Carolina facility. We started with an idea: to improve on the best, and went from there. The result is the finest, highest performing series of marine antennas we have ever built. We call them "Phase III." You'll call them amazing.Construction Goes High-TechPhase III antennas embody the ultimate in antenna design, construction and performance. We intend them for discerning, tech-conscious boaters who won't settle for less than the best, most versatile and most attractive antennas. For highest electrical efficiency, performance, and longevity, Phase III VHF and Cellular antennas start with silver-plated elements. They also feature Shakespeare's unique low-angle radiation that puts your signal where it matters most. All of our extra heavy-duty Phase III radomes are completely foam-filled. This sophisticated technique, which is no easy feat to manufacture, isolates the radiators from vibration and moisture for long, dependable service. Antenna mounting has also been designed for more versatility. Phase III's newly engineered ferrules accommodate a variety of installation possibilities, including standard 1" - 14 thread mounts, and strapping or clamping to a mast. The ferrule, its coupling ring, and the "N" connector at the base allow the antennas to be quickly and easily installed without re-routing your existing coax.lasting LuxuryGreat design and innovative construction demanded high-end looks that exemplify luxury and lasting beauty, while providing superb durability and the very best in UV stability. Phase III antennas get under way with a new Shakespeare gleaming white finish that is protected by our new, proprietary, aircraft grade high-gloss clear coating. Our new ferrules and fittings enhance the Phase III beauty with versatility and mirror-finished stainless steel. We take pride in building these antennas with the utmost attention to detail. Our skilled craftsmen hand assemble the antennas individually, and they hand solder every electrical connection. Boat VHF Antennas Minimize

The BM-1 is designed to monitor performance of 12 volt lead ... Read more

The BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 650 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. Specifications: Supply voltage: 8-16 volts DC Supply current: 3 milliamps Battery capacities: 5-650 AMP Hour Load Current: 100 Amps Max Charge Current: 100 Amps Max Shunt: Standard 50 millivolt @ 100 AmpCables Supplied:100 Amp shunt link to M8 Ring terminal. 5 metre from display unit to battery - fused and fitted with ring terminals for shunt, fuse holder, and M8 ring terminal to battery.Display Unit: Standard 110m squre clipper case. High contrast LCD, backlit for night viewing. Minimum voltage visual alarm Simple operation: 4 keys to select backlight, Volt/Amp/State of charge screen, AMP hours or time to run/ MP Master List Minimize