> Marine Electronics > Battery Chargers and Inverters

As the name implies the Ultra Pack is designed to exceed al ... Read more

As the name implies the Ultra Pack is designed to exceed all expectations for the serious winter angler. This innovative pack offers features like an enclosed 9 amp 12 volt battery controlled by a master on/off switch. A D-130 digital battery status indicator comes standard along with a 1 amp digital battery charger protected external charging ports universal transducer holder "dead stick" rod holder and even your own Vexilar tackle box! Minimize

Mastervolt Chargemaster Battery Charger, 100a, 24v . Compac ... Read more

Mastervolt Chargemaster Battery Charger, 100a, 24v . Compact, lightweight and highly efficient (Power Factor Corrected >0.98), the PowerCharger provides a clean output to the batteries regardless of the quality of the input power, extending battery life. Other features include the ability to revive a dead battery, 3-stage charging of flooded, gel or AGM batteries, DC power supply universal input (90-265VAC, 50/60Hz) for worldwide use, temperature compensation, built-in memory functions to prevent overcharging. Not compatible with Mastervolt s network CANbus system. Battery temperature sensor and remote monitoring available. Nominal output voltage: 24V Total charge current: 100A Number of Battery Outlets: 3 Battery Capacity Range: 200-1000 Ah Nominal Input Voltage: 120/230 V (50/60 Hz) 100 A Minimize

XANTREX FREEDOM 2012SW, 12 V NEW GENERATION XANBUS CONTROL ... Read more

XANTREX FREEDOM 2012SW, 12 V NEW GENERATION XANBUS CONTROL PANEL 75` NETWORK CABLE, Manufacturer: Xantrex Minimize

ProSport Series Recreational Sport Fishing & Boating On-Boa ... Read more

ProSport Series Recreational Sport Fishing & Boating On-Board Marine Battery Charger Amps: 12 Banks: 2 Volts: 12/24 Cable Size: 6'/6' Distributed-On-Demand™ Technology Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks Automatic Multi-Stage Charging Charges and conditions batteries with a built in safe maintenance mode for long and short term storage Extruded Aluminum Housing For superior heat transfer and durability Waterproof and Shock Resistant Saltwater tested for coastal sportfishing and boating Minimize

Guest Chargers -2502 70 AMP B ISOLATOR 2 ALT-2 BATTMARINCO/ ... Read more

Guest Chargers -2502 70 AMP B ISOLATOR 2 ALT-2 BATTMARINCO/AFIBattery Isolators Optimized heat sink design for maximum performance Minimized voltage drop across isolation barrier using Schotky type diodes Each output individually capable of carrying the full alternator load Fixed cable posts for secure connections Waterproof components for harsh environment performance - year after year NOTE: If used on a 24V system boat must be equipped with 24VDC alternator 70 Amp Battery Isolator Usage: 2 Alternators / 2 Batteries Max. Output per Alternator: 70 Amps Operation: 12V to 48V Dimensions: 10.0' x 5.5' x 3.7' Guest Battery Isolators Feature: Solid state design Rubber wire caps Marine grade construction Two-year warranty -Through Guest Minimize

Mastervolt Mass Combi Inverter/charger, 24v, 4000w, 240ac . ... Read more

Mastervolt Mass Combi Inverter/charger, 24v, 4000w, 240ac . The Mass Combi pure sine wave inverter/chargers are half the weight, and consume less than half the power of traditional inverter/chargers. Utilizing high-frequency switch mode technology for greater efficiency, Mass Combi includes a professional-grade inverter, automatic transfer switch and advanced three-stage-plus battery charger in a lightweight, compact design. Pure, clean sine wave AC power is the only choice for sensitive electronics, and high surge ratings let you operate motor loads, so you can power up your laptop or air condition the cabin for comfort. Charges up to two battery banks with lead-acid, gel or AGM settings, plus the ability to revive a dead battery , and built-in memory function to prevent overcharging. Power Sharing feature allows Mass Combi to be programmed so that when particular high-amperage loads turn on, the charger automatically de-rates, eliminating nuisance tripping of the shore breaker. Includes ICC Remote Panel, and battery temperature sensor with cable. Optional Mass Combi Interface Module allows connection to MasterBus onboard network including the MasterView Easy Remote Touchscreen Display which can show the information from multiple Mastervolt products including chargers, inverters, batteries, etc. on one display. Output Waveform: Pure Sine Wave Output Type: Plug-n-play connection to remote panels and temp. sensors Status Indicators: LED Indicator Automatic Functions: Automatic transfer switch Battery Charger: 3-stage, 2-bank battery charging of flooded, gel and AGM batteries or can be set to specific voltages, DC power supply Included Equipment: ICC Remote Panel and Temp. Sensor Approvals: CE Certified, E certified according to automotive directive 95/54/EG, meets UL and ABYC requirements Power: 220V, 4000W, 7500W Surge, 120A Dimensions: 19-1/2"L x 12-1/2"W x11" D Weight: 46.3lbs. Warranty: Two years Minimize

Digitally controlled 2x faster charge times Enhanced status ... Read more

Digitally controlled 2x faster charge times Enhanced status codes Advanced maintenance mode Multi-stage charging Automatic temperature compensation Waterproof, shock- and vibration-resistant aluminum construction Saltwater-tested and fully corrosion- Minimize

Minn Kota Mk345d Battery Charger (3 Bank) . 3 bank x 15 amp ... Read more

Minn Kota Mk345d Battery Charger (3 Bank) . 3 bank x 15 amps for a total of 45 amps total output. Our digital on-board chargers are engineered with a micro-processor-based design to protect your battery, charge faster and help you stay on the water longer. Monitors temperature and state-of-charge. Enhanced status codes display charge stage, maintenance mode status, any error notifications and full charge. Automatic shut-off feature extends battery life by shutting down when charging is complete. Mounts conveniently in the battery compartment. 3 charging banks 15 amps per bank 45 amps total output Recovery Time: 3-5 hours Size: 11- " length x 6- " width x 8" height Weight: 22 lbs. Digitally-controlled microprocessor design protects your batteries so you can stay on the water longer Up to 2X faster charging in high temperatures Enhanced status codes provide comprehensive feedback on charge stage, maintenance mode status, error notification and full charge Convenient on-board mounting eliminates the hassle of traditional portable chargers Fully automatic multi-stage charging (bulk, absorption and maintenance) so you get a full charge every time Automatic temperature compensation delivers fast charging recovery, even in extreme temperatures, while protecting your batteries from overcharging Waterproof*, shock- and vibration-resistant aluminum construction Short circuit, reverse polarity and ignition protection Saltwater tested and fully resistant to corrosion For use with 12, 24 or 36 volt systems with 12V / 6-cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only (60-180 amp hour rating) FCC compliant Warranty: 3 year UL listed to marine standard 1236 Includes: one pre-wired on-board marine battery charger with three 6' fused output cables and one 6' AC power cord, installation instructions and owners manual Minimize

The Victron BMV 602 battery monitor is capable of monitorin ... Read more

The Victron BMV 602 battery monitor is capable of monitoring two battery banks, including ampere hours and charge state. Minimize

2.8 x surge rating with 1.0 power factor for demanding appl ... Read more

2.8 x surge rating with 1.0 power factor for demanding applications like air conditioners, microwaves, and refrigerators. 7 selectable 3-stage battery charge profiles. Instant AC transfer switch passes AC shore/station power. Charges batteries when shore/station power is present or switches safely into inverter mode. Pure sine wave technology is ideal for audio/visual systems and large appliances with hysteresis motor control. Overload, high temperature, and high/low battery voltage protection. Removable deluxe remote. On/Off/Standby power modes and high visibility. LED indicators for charger, inverter, and fault modes. 2,000 watts continuous. 70-amp charger. 17"L x 9"W x 7"H. Minimize

Clipper BM-1CW Battery Monitor Compact White Description Cl ... Read more

Clipper BM-1CW Battery Monitor Compact White Description Clipper BM-1CW Battery Monitor Compact White Compact battery monitor, just 124 x 62mm x 23mm! Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium. Caravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a ca Minimize

The BM-1 is designed to monitor performance of 12 volt lead ... Read more

The BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 650 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. Specifications: Supply voltage: 8-16 volts DC Supply current: 3 milliamps Battery capacities: 5-650 AMP Hour Load Current: 100 Amps Max Charge Current: 100 Amps Max Shunt: Standard 50 millivolt @ 100 AmpCables Supplied:100 Amp shunt link to M8 Ring terminal. 5 metre from display unit to battery - fused and fitted with ring terminals for shunt, fuse holder, and M8 ring terminal to battery.Display Unit: Standard 110m squre clipper case. High contrast LCD, backlit for night viewing. Minimum voltage visual alarm Simple operation: 4 keys to select backlight, Volt/Amp/State of charge screen, AMP hours or time to run. Minimize

Guest Chargers -2503 70 AMP B ISOLATOR 2 ALT-3 BATTMARINCO/ ... Read more

Guest Chargers -2503 70 AMP B ISOLATOR 2 ALT-3 BATTMARINCO/AFIBattery Isolators Optimized heat sink design for maximum performance Minimized voltage drop across isolation barrier using Schotky type diodes Each output individually capable of carrying the full alternator load Fixed cable posts for secure connections Waterproof components for harsh environment performance - year after year NOTE: If used on a 24V system boat must be equipped with 24VDC alternator Guest Battery Isolators Feature: Solid state design Rubber wire caps Marine grade construction Two-year warranty -Through Guest 70 Amp Battery Isolator Usage: 2 Alternators / 3 Batteries Max. Output per Alternator: 70 Amps Operation: 12V to 48V Dimensions: 10.0' x 5.5' x 3.7' Minimize

Minn Kota Mk330d Battery Charger (3 Bank) . 3 bank x 10 amp ... Read more

Minn Kota Mk330d Battery Charger (3 Bank) . 3 bank x 10 amps for a total of 30 amps total output. Our digital on-board chargers are engineered with a micro-processor-based design to protect your battery, charge faster and help you stay on the water longer. Monitors temperature and state-of-charge. Enhanced status codes display charge stage, maintenance mode status, any error notifications and full charge. Automatic shut-off feature extends battery life by shutting down when charging is complete. Mounts conveniently in the battery compartment. 3 charging banks 10 amps per bank 30 amps total output Recovery Time: 4-6 hours Size: 16- " length x 7- " width x 4" height Weight: 20 lbs. Digitally-controlled microprocessor design protects your batteries so you can stay on the water longer Up to 2X faster charging in high temperatures Enhanced status codes provide comprehensive feedback on charge stage, maintenance mode status, error notification and full charge Convenient on-board mounting eliminates the hassle of traditional portable chargers Fully automatic multi-stage charging (bulk, absorption and maintenance) so you get a full charge every time Automatic temperature compensation delivers fast charging recovery, even in extreme temperatures, while protecting your batteries from overcharging Waterproof*, shock- and vibration-resistant aluminum construction Short circuit, reverse polarity and ignition protection Saltwater tested and fully resistant to corrosion For use with 12, 24 or 36 volt systems with 12V / 6-cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only (40-130 amp hour rating) FCC compliant Warranty: 3 year UL listed to marine standard 1236 Includes: one pre-wired on-board marine battery charger with three 6' fused output cables and one 6' AC power cord, installation instructions and owners manual Minimize

Digitally controlled 2x faster charge times Enhanced status ... Read more

Digitally controlled 2x faster charge times Enhanced status codes Advanced maintenance mode Multi-stage charging Automatic temperature compensation Waterproof, shock- and vibration-resistant aluminum construction Saltwater-tested and fully corrosion- Minimize

Mastervolt Chargemaster Battery Chargers Charger, Masterbus ... Read more

Mastervolt Chargemaster Battery Chargers Charger, Masterbus Network Compatible, 50a Output, 12v Dc Voltage, 11.5" X 8.3" 5.2" . ChargeMaster battery chargers feature high frequency switch mode technology, which makes them extremely efficient, compact and lightweight. Designed for worldwide marine applications, they offer universal input (90-265Vac, 50/60Hz) and are power factor corrected (>0.98). ChargeMasters may be used with lead acid, gel, AGM or spiral batteries and will charge up to 3 battery banks simultaneously. They also include an auxiliary power supply to provide DC voltage even if the batteries are not connected, they can revive a dead battery" and their built-in memory functions prevent overcharging. ChargeMasters provide optimal charging in a wide variety of ambient temperatures and feature variable speed fans. Providing full charging current even with low quality power, they offer no reduction of charging power if input power is low. Designed specifically for the marine environment with corrosion-resistant materials, the ChargeMasters feature easy-to-read displays, captive screws and keyhole slots for ease of installation. ChargeMasters meet global standards including FCC class B, over temperature, ignition protection, meet UL, ABYC requirements and are CE certified. The ChargeMaster series include temperature sensors and embedded Masterbus compatibility allowing them to be part of Mastervolt s Masterbus CANbus network system where information can be displayed, monitored and controlled from desired locations onboard and remotely from anywhere via SMS technology. Number of Outputs: Three Automatic Functions: Fully automatic multi-stage, multi-battery charging. Have the ability to charge dead batteries. Auto-ranging universal input voltage (90-265V AC, 50/60Hz), auxiliary power supply, are also compatible with low-quality power sources. User Selectable Functions: Settings for lead acid, gel, AGM or spiral batteries, can be set for exact voltages during stages of charging Temperature Compensation: Fully automatic temperature compensation, ChargeMasters include remote battery temperature sensor or may be purchased separately (41500500) for use with PowerChargers Input Wiring: AC hardwire terminals Output Wiring: Three positive terminals, one negative terminal Safety Features: Over temp, shutdown, ignition protected, overload protection, surge and short circuit protection Remote Available: Optional remote displays available, MasterView Easy (Part number 77010300), Masterview Read-Out (77010050) Approvals: Meet ABYC and UL 1236 including marine supplement, ignition protection, EMC, FCC Class B, CE certified Dimensions & Weight: 25A: 8.3" x 5.1" x 2.4" 2.2lbs, 35A & 50A: 11.5" x 8.3" x 5.2" 8.8lb., 70A: 14.2" x 10.9" x 5.9" 14.8lb. Price Includes: ChargeMaster battery charger, battery temperature sensor with 20ft. cable Warranty: Two years Minimize