> Marine Electronics > marine electronic type antennas/store sonic electronix

Em Trak Marine Electronics S100 Ais Antenna Splitter . Simp ... Read more

Em Trak Marine Electronics S100 Ais Antenna Splitter . Simplify AIS installation by using a single VHF antenna to combine AIS and VHF operations. The em-trak S100 Splitter enables any AIS Class B device and a VHF radio to be used in conjunction with a single VHF antenna. Zero loss Splitter Simple Installation Fail-safe Operation Zero loss in receive range Allows AIS and VHF to share the same antenna Small and lightweight Minimize

3-channel Class Ab Marine AmplifierRms Power Rating (13.8v) ... Read more

3-channel Class Ab Marine AmplifierRms Power Rating (13.8v): 4 Ohms: 65 Watts X 2 Chan. + 170 Watts X 1 Chan.2 Ohms: 90 Watts X 2 Chan. + 280 Watts X 1 Chan.Bridged, 4 Ohms: 170 Watts X 1 Chan.Pulse Width Modulated Mosfet Power SupplyLacquer Coated Pc Board Protects Against MoistureLed Power (green) And Protect (red) IndicatorsRotatable And Removable LogoRemovable Side FlangesSoft Start Turn-on3/2/1 Channel OperationSpeaker-level Inputs With Signal Sensing For Automatic Turn-on3-way System Protection Circuitry (thermal, Overload, And Speaker Short Protection)Heavy Duty Aluminum Alloy Heatsink For Extreme Heat DissipationGold-plated Rca Level InputsGold-plated Screw TerminalsInput Sensitivity: Level: 250mv-5vVariable High-pass Filter (50-150 Hz)Variable Low-pass Filter (50-120 Hz)Fixed Subsonic Filter (25 Hz)Phase Shift: 0-180°Damping Factor: ,100Frequency Response: 10-35,000 HzDimensions: 10-9/16ind X 14-1/16inw X 2-15/16inh4-gauge Power And Ground Wiring Is Required For Installation. Contact Us For Information Regarding A Discount On Select Amplifier Kits When Purchased Together With This Amplifier.1-year Manufacturer's Warranty Minimize

Em Trak Marine Electronics B100 Ais Class Transceiver . Pre ... Read more

Em Trak Marine Electronics B100 Ais Class Transceiver . Pre-programming is required.Register your AIS here prior to shipping. www.westmarine.com/ais. The B100 is engineered to provide you with reliable high performance AIS receive and transmit capability. Its built-in high performance dual channel receiver ensures you receive all AIS messages. Small and lightweight with NMEA 2000, NMEA 0183 and USB connectivity for easy installation, the B100 can be installed anywhere. Compatible with most chartplotters, PCs and Macs. SD card slot enables secure programming of the B100 as well as recording of AIS voyage data. For security in dangerous waters, a transmit off option is included. AIS Type: Class B Transceiver Display Type: None, requires external monitor or PC Antenna: 50-channel external GPS antenna included Draw: Average power consumption 170mA at 12VDC, 2A peak Voltage: 9.6-31.2V DC Data Interface: NMEA 2000, NMEA 0183, USB Included Equipment: GPS Antenna, 6'6" power and NMEA 0183 data cable, USB cable, CD with proAIS2 configuration software, mounting screws Waterproof Rating: IPX2 Warranty: One Year Minimize

2-channel Class Ab Marine AmplifierRms Power Rating (13.8v) ... Read more

2-channel Class Ab Marine AmplifierRms Power Rating (13.8v): 4 Ohms: 60 Watts X 2 Chan.2 Ohms: 100 Watts X 2 Chan.Bridged, 4 Ohms: 200 Watts X 1 Chan.Pulse Width Modulated Mosfet Power SupplyLacquer Coated Pc Board Protects Against MoistureLed Power (green) And Protect (red) IndicatorsRotatable And Removable LogoRemovable Side FlangesSoft Start Turn-on2/1 Channel OperationSpeaker-level Inputs With Signal Sensing For Automatic Turn-onPreamp Rca Outputs To Daisy Chain Multiple Amps3-way System Protection Circuitry (thermal, Overload, And Speaker Short Protection)Heavy Duty Aluminum Alloy Heatsink For Extreme Heat DissipationGold-plated Rca Level InputsGold-plated Screw TerminalsInput Sensitivity: Level: 250mv-5vVariable High-pass Filter (15-500 Hz)Variable Low-pass Filter (50-500 Hz)Damping Factor: ,100Frequency Response: 10-35,000 HzDimensions: 10-9/16ind X 9-1/16inw X 2-15/16inh8-gauge Power And Ground Wiring Is Required For Installation. Contact Us For Information Regarding A Discount On Select Amplifier Kits When Purchased Together With This Amplifier.1-year Manufacturer's Warranty Minimize

Designed to mount an additional Nav Light, GPS, or VHF ante ... Read more

Designed to mount an additional Nav Light, GPS, or VHF antennas above a dome radar for maximum visibility and performance. This stainless steel mount features internally run cables with a watertight seal. Installation is incredibly easy with pre-drilled mounting holes and no extra mounting hardware required. Attaches using radar mounting bolts. 1" x 14 TPI thread. Model: SC113 Mounts port-side Pre-fitted with Hella Marine NaviLED 360 Light Comes with 6.7 cableFits the following Scantrut radar mounts: Composite, Aluminum, and Stainless Steel PowerTowers Compact Dual PowerTower Aluminum and Stainless Steel SC100 Pole MountsFits the following satcom antennas: KVH M3 Intellian i3 Minimize

Ultra Low Loss Shireen LMR400 , RF Antenna Coax Cable PL-25 ... Read more

Ultra Low Loss Shireen LMR400 , RF Antenna Coax Cable PL-259 UHF Male/Male connectors. LMR400 LMR-400 Cable PL-259 UHF coax cable connectors - Connects Antennas, Receivers, Meters and Radio transmitters Ultra low loss characteristics ensure the maximum performance of your installation Impedance 50 Ohms Frequency Range DC ~ 11 GHz - PL-259 Connectors are not recomended for use above 300Mhz latest LMR400 Series of low loss cables offer excellent characteristics that meet or exceed the specs of alternatives from Times Microwave, Commscope, Andrew and Belden. Light weight, flexible low loss cable UV protected outer jacket Excellent Loss Characteristics Manufactured with the highest quality copper, aluminum, and polyethylene materials Compatible with the industry standard connectors and tools Shireen RG Type Times Microwave Andrew Belden Commscope RFC100A RG316/174 LMR100A CNT-100 RFC195 RG58/141/142 LMR195 CNT-195 8240/8219 WBC-195 CNT-240 Minimize

The Clipper navtex is the culmination of nearly 20 years of ... Read more

The Clipper navtex is the culmination of nearly 20 years of experience in manufacturing navtex instruments. The compact display unit will grace any instrument panel with its sharp high contrast liquid crystal display. Standard features of the receiver include 518 and 490kHz message reception and a non volatile program memory - if your sailing is confined to one particular area, then you need program the unit only once. Though it will of course receive every station worldwide if necessary! For the best possible night viewing the unit boasts a white backlight that is actuated automatically when programming, a single key press will turn it on and off when reading the messages. Additionally, a built in timer for the light is included to save power when not needed. The antenna at just 195mm high can be easily mounted at deck level to receive the navtex low frequency signals.Technical Specifications: 518 & 490 kHz operation 16 lines x 40 characters per screen Very high contrast display with white backlight Supply voltage nominal 12V Consumption 50mA @ 12V. (100mA with backlight) Power save auto timer on backlight Signal quality indicator and message error counter Non volatile program memory Compact display size: L-150mm, H-112mm, D-42mm Active micro antenna: H-195mm x 40mm. 7m cable Optional rail mount bracket Minimize

Two-way Radio, Marine, Color Black, Band Type Vhf, Frequenc ... Read more

Two-way Radio, Marine, Color Black, Band Type Vhf, Frequency Vhf Marine Mhz, Range 5 Miles, Height 5 5/8 In, Length 2 1/2 In, Width 1 13/16 In, Range 300,000 Sq Ft, Output Watts 5, Standby Time 7 Hours, Talk Time 70 Minutes, Battery Type Li-ion, Antenna, Display, Number Of Batteries 1, Programmable Channels, Includes Rechargeable Battery, Wall Charger, Antenna, Belt Clip Minimize