> Lighting > Track & Monorail > Nickel

Individual, dimmable light for either person in bed! This c ... Read more

Individual, dimmable light for either person in bed! This cordless over-the-bed dual LED lamp comes in a satin nickel finish. Each lamp has its own on/off switch, is dimmable, swivels, and slides along a 42 3/4" track for unmatched convenience in bed lighting. The fixture is easy to install and battery operated. Satin nickel finish. Dimmable. Includes two 60,000 hour "daylight" LED lamps. Takes four "D" batteries (not included). 42 3/4" long. Extends 4 1/2" from the wall. Minimize

Magnetic Surface Transformer mounts to a standard 4" juncti ... Read more

Magnetic Surface Transformer mounts to a standard 4" junction box (provided by electrician), rail drops 4.8" from ceiling. Add up to six 50 watt elements or up to eight 35 or 37 watt elements. (1) 8' long hand bendable MonoRail, available in 3 options (2 sets of 2) decorative end caps (2) rigid standoff supports each are 4" (1) 300 watt MAGNETIC transformer. antique bronze with brown insulatorchrome with clear insulatorsatin nickel with clear insulator. Minimize

Single Light In-Ground Round Path LightFloor / ground reces ... Read more

Single Light In-Ground Round Path LightFloor / ground recessed path lightStainless steel faceplateDie-cast aluminum bodyPolypropylene housing for poured concreteIP67 ratingRemote transformer required (sold separately)Requires 1 20w G4 base Halogen bulb (not included) Minimize

Nuvo TK382 Brushed Nickel ES - 3 Light - R30 - Bullet Swive ... Read more

Nuvo TK382 Brushed Nickel ES - 3 Light - R30 - Bullet Swivel Track Kit w/ 15w CFLNumber of Lights: 3 Lamp Type: R30 Lamp Maximum Wattage: 15W Lamp Base Type: GU24 Light Bulb Included: Yes Dimension: Heigh: 4.5 inch, Width: 5.75 inch Length: 0.75 inchThis Track is also available in 2ft, 4ft, 6ft or 8ft in length.Track Kit Includes:- (1) 4 feet track- (3) Track Lighting Heads- (1) Flouting power feed canopy- All neccessary mounting hardware- Four color display carton Minimize

This single-feed surface transformer converts standard 120 ... Read more

This single-feed surface transformer converts standard 120 volt line voltage to 24 volts to provide the necessary voltage for powering a MonoRail low-voltage lighting system. It can power lamps totaling up to 600 watts. The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the system off should a short occur. Once the short has been removed the breaker can be reset.This surface transformer includes a preinstalled debuzzing dimming coil to reduce audible noice when using a low-voltage dimmer.Black and white finish have satin nickel feeds. The shortest rigid standoff that can be used with this surface transformer is 5" rigid standoff (sold separately). If dropping the rail more than 5" below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately). This surface transformer may be plugged in with the addition of a Plug Option, a 16 foot cord with plug (sold separately). Minimize

Create a custom linear arrangement of lights over a kitchen ... Read more

Create a custom linear arrangement of lights over a kitchen island or bar with the Tech-Tiella 3-Port Linear Canopy. Available in two complementary finishes, this rectangular multi-port canopy powers any three of the numerous MonoPoint elements with its included transformer. To be used only with Tech-Tiella MonoPoint pendants and directional heads. Tech-Tiella rail products are not compatible with Tech rail products.Out of Skokie, IL, Tech-Tiella Lighting produces some of North America's bes Minimize

Surface Transformer mounts to a standard 4" junction box (p ... Read more

Surface Transformer mounts to a standard 4" junction box (provided by electrician), rail drops 3.6" from ceiling. Add up to three 50 watt elements or up to four 35 or 37 watt elements. (1) 8" long hand bendable MonoRail,available in 3 options (2 sets of 2) decorative end caps (2) rigid standoff supports each are 3" (1) 150 watt MAGNETIC transformer. antique bronze with brown insulatorchrome with clear insulatorsatin nickel with clear insulator. Minimize

This dual-feed surface transformer converts standard 120 vo ... Read more

This dual-feed surface transformer converts standard 120 volt line voltage to 12 volts to provide the necessary voltage for powering a MonoRail low-voltage lighting system (2 X 12V 300W circuits). It can power lamps totaling up to 600 watts. The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the system off should a short occur. Once the short has been removed the breaker can be reset.This surface transformer includes a preinstalled debuzzing dimming coil to reduce audible noice when using a low-voltage dimmer.Black and white finish have satin nickel feeds. The shortest rigid standoff that can be used with this surface transformer is 5" rigid standoff (sold separately). If dropping the rail more than 5" below the ceiling, order the desired rigid standoff length and two compatible power extenders (sold separately). This surface transformer may be plugged in with the addition of a Plug Option, a 16 foot cord with plug (sold separ Minimize