> Lighting > indoor lighting fixture/store lightingdirect com

3 Watt LED Wall Lighting Fixture with J-Box and Driver from ... Read more

3 Watt LED Wall Lighting Fixture with J-Box and Driver from the Ledra CollectionThe Ledra Duo with J-Box and Driver is a up and downlight fixture. Suitable for indoor use. The small size, long life, lack of UV, and cool beam allows for a wide variety of applications. Ledra fixture is dimmable if used with appropriate Ledra dimming driver. Refer to a drive specification sheet for correct installation.Features:100-240V AC, 50/60Hz input700mA DC constant current output6VA, 3W for 1 (3 Watt LED)White source of 110 lumensWarm White source of 96 lumensSuitable for dry locations only2 1/4" hole cutoutRequired material thickness 3/16" - 1 1/16"Not thru-wire ratedShort circuit protectionOverload protectionThermal protectionAll 3 Watt LED fixtures are warranted to be free from defects in material and workmanship for three (3) years from date of delivery.About Bruck Lighting Systems:Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different track and cable systems, spot fixtures, display fixtures, decorative pendants, and sconces, low-voltage lighting has always been the focus.As technology develops new energy efficient light sources, Bruck continues to design new and innovative products to utilize the latest lighting advancements. Two primary advancements that embody energy efficiency are Light Emitting Diodes (LEDs) and Compact Fluorescents. Bruck now offers an LED track system, multiple LED fixtures including some that are adapted for 12V track systems, LED pendants and sconces, and 18W compact fluorescent decorative pendants. Minimize

96 Watt Dimmable Class II Driver for LED Light Fixtures fro ... Read more

96 Watt Dimmable Class II Driver for LED Light Fixtures from the Orion CollectionThe 96 watt driver is a Class II power supply rated for operating LEDs. It features an universal voltage input and a 24volt output and can be controlled with a Mark VII 0-10v certified dimmer. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. Use 18 gauge wire for remote installation up to a maximum of 25ft. National and local codes must be followed when mounting driver inside a junction box. Please contact manufacturer for further details.Features:100-277V AC, 50/60Hz input24V DC variable output96VA, 95W for 76ft max (White, Warm White, Blue, and Green)96VA, 95W for 128ft max (Red and Amber)Mark VII 0-10v dimming controlOperating temperature: -22-F to 140-FClass II ratedSuitable for damp location (contact manufacturer for wet location use)Short circuit protectionOverload protectionOver-voltage protectionThermal protection1/2" NPT electrical connectAbout Bruck Lighting Systems:Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different track and cable systems, spot fixtures, display fixtures, decorative pendants, and sconces, low-voltage lighting has always been the focus.As technology develops new energy efficient light sources, Bruck continues to design new and innovative products to utilize the latest lighting advancements. Two primary advancements that embody energy efficiency are Light Emitting Diodes (LEDs) and Compact Fluorescents. Bruck now offers an LED track system, multiple LED fixtures including some that are adapted for 12V track systems, LED pendants and sconces, and 18W compact fluorescent decorative p Minimize

40 Watt Class II DC Driver for use with LED Light FixturesT ... Read more

40 Watt Class II DC Driver for use with LED Light FixturesThe 40 watt driver is a Class II power supply rated for operating LEDs. It features a universal voltage input and a constant current output. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. To avoid damage to LEDs, the number of fixtures connected must be within the range limits listed for the driver and be wired in series. Use 18-20 gauge wire for remote installation up to a maximum of 150ft. National and local codes must be followed when mounting driver inside a junction box. Please contact manufacturer for further details.Features:100-277V AC, 50/60Hz input700mA DC constant current output15VA, 14W for 6(3W LEDs)17VA, 16W for 7(3W LEDs)20VA, 19W for 8(3W LEDs)22VA, 21W for 9(3W LEDs)24VA, 24W for 10(3W LEDs)Amber/Red lads are 2watt, requiring a minimum of 9, up to a maximum of 14.Operating temperature: -22-F to 140-FClass II ratedSuitable for damp locationShort circuit protectionOverload protectionOver-voltage protectionThermal protectionAbout Bruck Lighting Systems:Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different track and cable systems, spot fixtures, display fixtures, decorative pendants, and sconces, low-voltage lighting has always been the focus.As technology develops new energy efficient light sources, Bruck continues to design new and innovative products to utilize the latest lighting advancements. Two primary advancements that embody energy efficiency are Light Emitting Diodes (LEDs) and Compact Fluorescents. Bruck now offers an LED track system, multiple LED fixtures including some that are adapted Minimize