> Home Theater Speakers and Subwoofers > Sound Dynamics

Powerful, accurate and styled to make a dramatic design sta ... Read more

Powerful, accurate and styled to make a dramatic design statement in any listening environment, Studio 190 floor-standing loudspeaker from Harman Kardon® deliver the dynamic range, tonal accuracy and spatial transparency. Studio 190s’ tower configuration places the midrange and HF drivers at the ear level of a seated listener, delivering more direct sound with fewer unwanted reflections. The rigid, heavily braced enclosure includes a rear-facing bass port for extended low-frequency response. The enclosure in a silver-tinted black finish incorporates the distinctive JBL Weave design for a dynamic, one-of-a-kind look.This Studio 190 speaker system features dual woofers with stiff, lightweight ribbed PolyPlas™ cones and rubber surrounds that dissipate heat and minimize distortion, even at high listening levels. Moreover its midrange driver, with a PolyPlas cone and cloth surround, is housed in a separate sub-enclosure to isolate its sound from that of the woofers, improving overall clarity. A CMMD® Lite tweeter dome with a Bi-Radial® waveguide eliminates unwanted resonances and distributes clear, distinct high-frequency sound over a wider listening area, greatly expanding your room’s “sweet spot.” All drivers are magnetically shielded for placement near video monitors when used in home theater configurations. To sum it all, the Studio 190 speakers are voice-matched to the other speakers in the Studio 1 Series (Studio 120c, Studio 130 and Studio 180), making it easy for you to design the ideal home theater for virtually any listening space, but of course, they also perform brilliantly in stereo pairs, reproducing your favorite music with all the subtlety and nuance of the original performance. Minimize

This THX Ultra2 Certified subwoofer delivers sound with a b ... Read more

This THX Ultra2 Certified subwoofer delivers sound with a boom! TX-12SUB features a flat anechoic response from 20Hz to 200Hz and accurate in-room response from 15Hz to 350Hz for the very clearest low end frequencies. A high quality, built-in 200 watt amplifier, delivers a powerful and dynamic sound that adds weight to films and music. Its twelve inch long throw driver incorporates a light but rigid specially treated paper cone for fast response with no audible distortion. Backed by serious magnets, it achieves a deep, dynamic and transient bass, with astonishing sonic accuracy. The enclosure is heavily braced on all critical joints to offer as acoustically "dead" an enclosure as possible. The extensive strengthening of the enclosure maximizes the dynamic capability of the mechanical design. By using four TX-12SUBs you will not only achieve the reference output required by the THX Ultra2 certification, you will also enjoy optimized LFE output for many listening positions in your Home Theater setup, coupled with optimal standing wave control. THX Ultra2 Certified products bring the cinematic experience to larger home theaters, 3,000 cubic feet in size, with a viewing distance of 12 feet or greater from the screen. Minimize

As the most important reproducer in a multi-channel surroun ... Read more

As the most important reproducer in a multi-channel surround sound system the center channel speaker must deliver vocals and dialog with the utmost clarity along with music and special effects and must also match the tonality of the main left and right front speakers. The Performa C52 center channel loudspeaker is the ideal companion to our F52 and F32 models delivering a combination of tonal neutrality and outstanding dynamic range fully up to the task of providing faithful reproduction with todayÕs explosive movie soundtracks and high resolution multi-channel music sources such as DVD-Audio and SACD. Featuring a pair of 8-inch Organic Ceramic Composite cone high performance woofers along with a 5_-inch OCC cone midrange driver the F52 also features our recently developed and proprietary Constant Acoustic Impedance tweeter waveguide technology. The 1-inch aluminum dome tweeter is housed in the specially-shaped CAI waveguide which provides optimum acoustic impedance loading along with precise horizontal and vertical dispersion. Together these components contribute to the virtual acoustic invisibility of the tweeter which cannot be localized as an individual driver providing a seamless acoustic blend and a broad and expansive soundstage. The three high order steep slope crossovers are physically separated to prevent mutual interference and each C52 is individually hand-tuned to within a fraction of a decibel to match the production reference standard. A rear panel control allows acoustic optimization for stand mounting on-monitor and in-cabinet placement. Another control provides high frequency level adjustment in _ dB increments. Minimize

Sold per Pair... This AMAZING speaker that is standing at n ... Read more

Sold per Pair... This AMAZING speaker that is standing at nearly 1.2m tall the PL300 is a majestic three-way floor-standing loudspeaker possessing the ability to generate the power and scale required to fill a larger room with awe-inspiring sound. Jaw-dropping dynamics combined with supreme agility give the PL300 the power to paint the widest and most luminous of sonic pictures. It is a true wide-bandwidth speaker system reproducing clean natural frequencies ranging from 28Hz to 100kHz. Extremely accurate drivers very low distortion networks and a sublimely inert cabinet structure combine to create a loudspeaker of immense sonic integrity: neutral lifelike and totally refined. Frequency Response: 28 Hz - 100 KHz Sensitivity (1W@1M): 90 db Nominal Impedance:4 Ohms Maximum S.P.L (Per pair in room): 118.6 dBA Power Handling (RMS): 300 W Recommended Amplifier Requirements (RMS): 100 - 300 W Bass Alignment: Twin Ported HiVe II Technology Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Hz Driver Unit Complement: 2 x 8" long throw RDT bass drivers / 1 x 4" RDT mid-range driver /1 x C-CAM high frequency ribbon transducer External Dimensions - Including Fixed Plinth & Feet (H x W x D): 1113 x 410 x 470 mm (43 13/16 x 16 1/8 x 18 1/2)Weight (each) including Plinth:43.8Kg (96.4lbs) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize

Sold Individually... Image T5 Tower has a slim dual-woofer ... Read more

Sold Individually... Image T5 Tower has a slim dual-woofer transitional two-and-a-half way design with identical 5.25-inch woofers and a one-inch titanium tweeter that delivers reproduced and refined sound. The T5 Tower offers tonal spatial and dynamic accuracy in a well-designed package with stunning finishes and subtle curvature that will easily into any home decor. Upon first listen it is evident that PSB's distinctive high performance traits were at the forefront of this design concept with unprecedented sound quality and top-of-the-line design features it is an astounding product at an improbable price. The T5 Tower is a shortfall in price but not in performance. Image T5 Tower Specifications Frequency Range On Axis @ 0° ±1.5dB 48-20 000Hz On Axis @ 0° ±3dB 35-23 000Hz Off Axis @ 30° ±3dB 48-10 000Hz Lf Cutoff -10dB 30Hz Sensitivity 1w (2.83V) @ 1m IEC-filtered Pink Noise C-weighted Anechoic Chamber 88dB Typical Listening Room 90dB Impedence Nominal 6 Ohms Minimum 4 Ohms Input Power RMS Clipping < 10% of the Time Recommended 20 - 200 Watts Program 200 Watts Acoustic Design Tweeter (Nominal) 1” (25mm) Titanium Dome with Ferrofluid Neodymium Magnet Woofer (Nominal) 2 x 5 1/4” (133mm) Clay/Ceramic filled Polypropylene Cone Rubber Surround Crossover 1 800Hz LR4 800Hz Internal Volume Design Type 1.42 cu ft (40.2L) Bass Reflex Size (W x H x D) Millimeters 214 x 936 x 325mm Inches 8 3/8 x 36 7/8 x 12 3/4” Net Weight Kilograms 16.6kg/each Pounds 36.6lbs (/each Shipping Weight Kilograms 20.1kg/each Pounds 44.4lbs /each Finish Black Ash or Dark Cherry Minimize

Sold per Pair... The larger RX2 is designed as an audiophil ... Read more

Sold per Pair... The larger RX2 is designed as an audiophile compact 2-way speaker having the efficiency and bandwidth of a much larger speaker while being easier to position around the home. It offers extended high frequencies to resolve hidden detail coupled with immense dynamic headroom and bass depth so that all the delicacy and drama of your favourite music and film sound is revealed. New C-CAM® tweeter design with damped rear chamber providing improved clarity and wider operating range for HD audio formats New 8” bass driver with C-CAM® cone profile incorporating RST® technology for better damping and improved mid-range clarity. New cast polymer bass chassis design for better rigidity and lower reflection properties HiVe®II port technology for better transient response and tighter bass. Single bolt through driver system for increased overall bracing and rigidity. Rigid 19mm MDF construction throughout employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration Invisible magnetic grille fixing provides clean visual styling when used with the grille off. Selected premium quality wood veneers or high gloss piano finishes. System Format: 2 Way Frequency Response: 40Hz - 35kHz Sensitivity (1W@1M): 90dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 113.8 Power Handling (RMS): 100W Recommended Amplifier Requirements (RMS): 25-100W Bass Alignment: Bass reflex - rear ported. HiVe®II port System Tweeter Crossover Frequency: 2.0kHz Drive Unit Complement: 1 x 8" RST® Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter Product External Dimensions: (H x W x D) 375 x 230 x 300 mm (14 3/4 x 9 1/16 x 11 13/16 inch) Individual Weight: 9.5 Kg (20.88 lb) The word mark MONITOR AUDIO® is a registered trademark of KEVRO INTERNATIONAL®. The images of MONITOR AUDIO® equipment components and/or accessories depicted above may be copyrightable subject matter of KEVRO INTERNATIONAL®. Our company is not an authorized dealer of Monitor Audio® products but does maintain a stocking inventory of BRAND NEW goods of that company's products. As such Monitor Audio® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty AT NO CHARGE on all products sold and any product purchased from us will come with a standard EQUIVELANT to manufacturer warranty. Minimize